Tuning Spin-Polarized Lifetime at High Carrier Density through Deformation Potential in Dion-Jacobson-Phase Perovskites.

The control of spin relaxation mechanisms is of great importance for spintronics applications as well as for fundamental studies. Layered metal-halide perovskites represent an emerging class of semiconductors with rich optical spin physics, showing potential for spintronic applications. However, a major hurdle arises in layered metal-halide perovskites with strong spin-orbit coupling, where the spin lifetime becomes extremely short due to D'yakonov-Perel' scattering and Bir-Aronov-Pikus at high carrier density. Using the circularly polarized pump-probe transient reflection technique, we experimentally reveal the important scattering for spin relaxation beyond the electron-hole exchange strength in the Dion-Jacobson (DJ)-type 2D perovskites (3AMP)(MA)n-1PbnI3n+1 [3AMP = 3-(aminomethyl)piperidinium, n = 1-4]. Despite a more than 10-fold increase in carrier concentration, the spin lifetimes for n = 3 and 4 are effectively maintained. We reveal neutral impurity and polar optical phonon scatterings as significant contributors to the momentum relaxation rate. Furthermore, we show that more octahedral distortions induce a larger deformation potential which is reflected on the acoustic phonon properties. Coherent acoustic phonon analysis indicates that the polaronic effect is crucial in achieving control over the scattering mechanism and ensuring spin lifetime protection, highlighting the potential of DJ-phase perovskites for spintronic applications.

Efficient Green Spin Light-Emitting Diodes Enabled by Ultrafast Energy- and Spin-Funneling in Chiral Perovskites.

Introducing molecular chirality into perovskite crystal structures has enabled the control of carrier spin states, giving rise to circularly polarized luminescence (CPL) in thin films and circularly polarized electroluminescence (CPEL) in LEDs. Spin-LEDs can be fabricated either through a spin-filtering layer enabled by chiral-induced spin selectivity or a chiral emissive layer. The former requires a high degree of spin polarization and a compatible spinterface for efficient spin injection, which might not be easily integrated into LEDs. Alternatively, a chiral emissive layer can also generate circularly polarized electroluminescence, but the efficiency remains low and the fundamental mechanism is elusive. In this work, we report an efficient green LED based on quasi-two-dimensional (quasi-2D) chiral perovskites as the emitting layer (EML), where CPEL is directly produced without separate carrier spin injection. The optimized chiral perovskite thin films exhibited strong CPL at 535 nm with a photoluminescence quantum yield (PLQY) of 91% and a photoluminescence dissymmetry factor (glum) of 8.6 × 10-2. Efficient green spin-LEDs were successfully demonstrated, with a large EL dissymmetry factor (gEL) of 7.8 × 10-2 and a maximum external quantum efficiency (EQE) of 13.5% at room temperature. Ultrafast transient absorption (TA) spectroscopic study shows that the CPEL is generated from a rapid energy transfer accompanied by spin transfer from 2D to 3D perovskites. Our study not only demonstrates a reliable approach to achieve high performance spin-LEDs but also reveals the fundamental mechanism of CPEL with an emissive layer of chiral perovskites.

Modulating hot carrier cooling and extraction with A-site organic cations in perovskites.

Hot carrier solar cells could offer a solution to achieve high efficiency solar cells. Due to the hot-phonon bottleneck in perovskites, the hot carrier lifetime could reach hundreds of ps. Such that exploring perovskites could be a good way to promote hot carrier technology. With the incorporation of large organic cations, the hot carrier lifetime can be improved. By using ultrafast transient spectroscopy, the hot carrier relaxation and extraction kinetics are measured. From the transient kinetics, 2-phenyl-acetamidine cation based perovskites exhibit the highest initial carrier temperature, longest carrier relaxation, and slowest hot carrier relaxation. Such superior behavior could be attributed to reduced electron-phonon coupling induced by lattice strain, which is a result of the large organic cation and also a possible surface electronic state change. Our discovery exhibits the potential to use large organic cations for the use of hot carrier perovskite solar cells.

Multidentate Chelation Achieves Bilateral Passivation toward Efficient and Stable Perovskite Solar Cells with Minimized Energy Losses.

Defects in the electron transport layer (ETL), perovskite, and buried interface will result in considerable nonradiative recombination. Here, a bottom-up bilateral modification strategy is proposed by incorporating arsenazo III (AA), a chromogenic agent for metal ions, to regulate SnO2 nanoparticles. AA can complex with uncoordinated Sn4+/Pb2+ in the form of multidentate chelation. Furthermore, by forming a hydrogen bond with formamidinium (FA), AA can suppress FA+ defects and regulate crystallization. Multiple chemical bonds between AA and functional layers are established, synergistically preventing the agglomeration of SnO2 nanoparticles, enhancing carrier transport dynamics, passivating bilateral defects, releasing tensile stress, and promoting the crystallization of perovskite. Ultimately, the AA-optimized power conversion efficiency (PCE) of the methylammonium-free (MA-free) devices (Rb0.02(FA0.95Cs0.05)0.98PbI2.91Br0.03Cl0.06) is boosted from 20.88% to 23.17% with a high open-circuit voltage (VOC) exceeding 1.18 V and ultralow energy losses down to 0.37 eV. In addition, the optimized devices also exhibit superior stability.

Fabrication of Homogeneous Nanoporous Structure on 4H-/6H-SiC Wafer Surface via Efficient and Eco-Friendly Electrolytic Plasma-Assisted Chemical Etching.

Nanoporous single-crystal silicon carbide (SiC) is widely used in various applications such as protein dialysis, as a catalyst support, and in photoanodes for photoelectrochemical water splitting. However, the fabrication of nano-structured SiC is challenging owing to its extreme chemical and mechanical stability. This study demonstrates a highly-efficient, open-circuit electrolytic plasma-assisted chemical etching (EPACE) method without aggressive fluorine-containing reactants. The EPACE method enables the nano-structuring of SiC via a plasma-enveloped microtool traversing over the target material in an electrolyte bath. Through process design, EPACE readily produces a uniform nanoporous layer on a 4H-SiC wafer in KOH aqueous solution, with adjustable pore diameters in the range 40-130 nm. Plasma diagnosis by optical emission spectrometry (OES) and surface microanalysis reveal that EPACE realizes a nanoporous structure by electrolytic plasma-assisted oxidation and subsequent thermochemical reduction of an oxide. An increase in voltage or a decrease in etch gap intensifies the plasma and improves the etching efficiency. The maximum etch rate and depth reach 540 nm min-1 and 10 µm, respectively, demonstrating the significant potential of the approach as a time-saving and sustainable nanofabrication method for industrial applications. Further, the effectiveness of the fabricated SiC nanoporous structure for application in photoelectrochemical water splitting is demonstrated.

Charge Management Enables Efficient Spontaneous Chromatic Adaptation Bipolar Photodetector.

Solution-processed photodetectors have emerged as promising candidates for next-generation of visible-near infrared (vis-NIR) photodetectors. This is attributed to their ease of processing, compatibility with flexible substrates, and the ability to tune their detection properties by integrating complementary photoresponsive semiconductors. However, the limited performance continues to hinder their further development, primarily influenced by the difference of charge transport properties between perovskite and organic semiconductors. In this work, a perovskite-organic bipolar photodetectors (PDs) is introduced with multispectral responsivity, achieved by effectively managing charges in perovskite and a ternary organic heterojunction. The ternary heterojunction, incorporating a designed NIR guest acceptor, exhibits a faster charge transfer rate and longer carrier diffusion length than the binary heterojunction. By achieving a more balanced carrier dynamic between the perovskite and organic components, the PD achieves a low dark current of 3.74 nA cm-2 at -0.2 V, a fast response speed of <10 µs, and a detectivity of exceeding 1012 Jones. Furthermore, a bioinspired retinotopic system for spontaneous chromatic adaptation is achieved without any optical filter. This charge management strategy opens up possibilities for surpassing the limitations of photodetection and enables the realization of high-purity, compact image sensors with exceptional spatial resolution and accurate color reproduction.

Evaluating STC2 gene RNA in peripheral blood serum of gastric cancer patients.

Cancer is one of the leading causes of death in the world. Invasive microscopic and endoscopic methods are not suitable for routine screening of gastric cancer. Therefore, the need for biomarkers that can detect quickly, efficiently, and with high sensitivity in the early stages of cancer is strongly felt. Stanniocalcin plays a role in regulating calcium and phosphorus in the body. In addition, it plays a role in neuron cell differentiation, angiogenesis, wound healing, fertility and embryo development, and cancer. This study investigated the level of expression of the Stanniocalcin 2 (STC2) gene in the serum of patients with gastric cancer. This case-control study was conducted on the samples of 60 patients with gastric cancer (cases) and 60 healthy individuals (controls). Peripheral blood samples from gastric cancer patients and volunteers as control groups were collected in tubes containing EDTA anticoagulant and were immediately subjected to serum separation. After centrifugation, serum RNA was extracted, and after cDNA synthesis, STC2 gene serum RNA level was measured by the Taq Man method and Real-time PCR using specific primers and probes. Then, the results of serum evaluations and clinicopathological information of patients and control group were collected along with the information obtained from reviewing patients' files and demographic findings, regulatory tables, and related charts. SPSS22 software was used to analyze descriptive data. According to the study results, the high expression of the STC2 gene was 31 cases in the case group and 13 cases in the control group. However, there was a significant relationship between the high expression of the STC2 gene and gastric cancer (p = 0.0001). However, there was no significant relationship between the gender of patients and high expression of the STC2 gene. However, the age of 35% of the patients was more than 65 years, and there was a significant relationship between the age of the patients and the high expression of the STC2 gene (P = 0.028). Although there was no significant relationship between the anatomical location of the cancer and the subtypes of the cancer and the high expression of the STC2 gene, there was a significant relationship between the degree of cancer differentiation and the high expression of STC2 gene (P<0.05). In general, STC2 can be used as a biomarker to determine the border and margins of the tumor. Analysis of STC2 gene expression during surgery can reduce surgical error in tumor removal and increase the success of surgery for tumor removal.

Biselenophene Imide: Enabling Polymer Acceptor with High Electron Mobility for High-Performance All-Polymer Solar Cells.

The shortage of narrow band gap polymer acceptors with high electron mobility is the major bottleneck for developing efficient all-polymer solar cells (all-PSCs). Herein, we synthesize a distannylated electron-deficient biselenophene imide monomer (BSeI-Tin) with high purity/reactivity, affording an excellent chance to access acceptor-acceptor (A-A) type polymer acceptors. Copolymerizing BSeI-Tin with dibrominated monomer Y5-Br, the resulting A-A polymer PY5-BSeI shows a higher molecular weight, narrower band gap, deeper-lying frontier molecular orbital levels and larger electron mobility than the donor-acceptor type counterpart PY5-BSe. Consequently, the PY5-BSeI-based all-PSCs deliver a remarkable efficiency of 17.77 % with a high short-circuit current of 24.93 mA cm-2 and fill factor of 75.83 %. This efficiency is much higher than that (10.70 %) of the PY5-BSe-based devices. Our study demonstrates that BSeI is a promising building block for constructing high-performance polymer acceptors and stannylation of electron-deficient building blocks offers an excellent approach to developing A-A type polymers for all-PSCs and even beyond.

Rashba Band Splitting and Bulk Photovoltaic Effect Induced by Halogen Bonds in Hybrid Layered Perovskites.

Non-covalent interactions play an essential role in directing the self-assembly of hybrid organic-inorganic crystals. In hybrid halide perovskites, hydrogen bonding has been the paramount non-covalent interaction. Here, we show another non-covalent interaction, namely, the halogen bond interaction, that directs a symmetry-breaking assembly in a new series of two-dimensional (2D) perovskites (ICH2 CH2 NH3 )2 (CH3 NH3 )n-1 Pbn I3n+1 (n is the layer thickness, n=1-4). Structural analysis shows that the halogen bond strength varies with the layer thickness. For the odd number (n=1, 3) layered perovskites, stronger halogen interaction leads to centrosymmetric structures, whereas for the n=2 layered perovskites, weaker halogen bonds result in non-centrosymmetric structures. Transient reflection spectroscopy shows a suppressed radiative recombination rate (k2 ≈0) and prolonged spin lifetime for n=2 structure, suggesting an enhanced Rashba band splitting effect. The structural asymmetry is further confirmed with a reversible bulk photovoltaic effect. Our work provides a new design strategy to enable hybrid perovskites with emerging properties and functionalities associated with structural asymmetry.

Dual Lewis Acid-Base Sites Regulate Silver-Copper Bimetallic Oxide Nanowires for Highly Selective Photoreduction of Carbon Dioxide to Methane.

Highly selective photoreduction of CO2 to valuable hydrocarbons is of great importance to achieving a carbon-neutral society. Precisely manipulating the formation of the Metal1 ⋅⋅⋅C=O⋅⋅⋅Metal2 (M1 ⋅⋅⋅C=O⋅⋅⋅M2 ) intermediate on the photocatalyst interface is the most critical step for regulating selectivity, while still a significant challenge. Herein, inspired by the polar electronic structure feature of CO2 molecule, we propose a strategy whereby the Lewis acid-base dual sites confined in a bimetallic catalyst surface are conducive to forming a M1 ⋅⋅⋅C=O⋅⋅⋅M2 intermediate precisely, which can promote selectivity to hydrocarbon formation. Employing the Ag2 Cu2 O3 nanowires with abundant Cu⋅⋅⋅Ag Lewis acid-base dual sites on the preferred exposed {110} surface as a model catalyst, 100 % selectivity toward photoreduction of CO2 into CH4 has been achieved. Subsequent surface-quenching experiments and density functional theory (DFT) calculations verify that the Cu⋅⋅⋅Ag Lewis acid-base dual sites do play a vital role in regulating the M1 ⋅⋅⋅C=O⋅⋅⋅M2 intermediate formation that is considered to be prone to convert CO2 into hydrocarbons. This study reports a highly selective CO2 photocatalyst, which was designed on the basis of a newly proposed theory for precise regulation of reaction intermediates. Our findings will stimulate further research on dual-site catalyst design for CO2 reduction to hydrocarbons.

Expanding the absorption and photoresponse of 1D lead-halide perovskites via ultrafast charge transfer.

Low-dimensional metal halide perovskites are attracting extensive attention due to their enhanced quantum confinement and stability compared to three-dimensional perovskites. However, low dimensional connectivity in the inorganic frameworks leads to strongly bounded excitons with limited absorption properties, which impedes their application in photovoltaic devices. Here, we show that, by incorporating a strong electron accepting methylviologen cation, charge transfer (CT) at the organic/inorganic interface can effectively tune the optical properties in one-dimensional (1D) lead-halide perovskites. Both 1D MVPb2I6 and MVPb2Br6 display expanded absorption and photoresponse activity compared to CT inactive cations. The photoinduced CT process in MVPb2I6 was further characterized by transient absorption spectroscopy, which shows an ultrafast CT process within 1 ps, generating charge separated states. Our work unveils the interesting photophysics of these unconventional 1D perovskites with functional organic chromophores.

Tuning Spin-Polarized Lifetime in Two-Dimensional Metal-Halide Perovskite through Exciton Binding Energy.

Metal-halide perovskite semiconductors have attracted attention for opto-spintronic applications where the manipulation of charge and spin degrees of freedom have the potential to lower power consumption and achieve faster switching times for electronic devices. Lower-dimensional perovskites are of particular interest since the lower degree of symmetry of the metal-halide connected octahedra and the large spin-orbit coupling can potentially lift the spin degeneracy. To achieve their full application potential, long spin-polarized lifetimes and an understanding of spin-relaxation in these systems are needed. Here, we report an intriguing spin-selective excitation of excitons in a series of 2D lead iodide perovskite (n = 1) single crystals by using time- and polarization-resolved transient reflection spectroscopy. Exciton spin relaxation times as long as ∼26 ps at low excitation densities and at room temperature were achieved for a system with small binding energy, 2D EOA2PbI4 (EOA = ethanolamine). By tuning the excitation density and the exciton binding energy, we identify the dominant mechanism as the D'yakonov-Perel (DP) mechanism at low exciton densities and the Bir-Aronov-Pikus (BAP) mechanism at high excitation densities. Together, these results provide new design principles to achieve long spin lifetimes in metal-halide perovskite semiconductors.

A Nanocrystal Catalyst Incorporating a Surface Bound Transition Metal to Induce Photocatalytic Sequential Electron Transfer Events.

Heterogeneous photocatalysis is less common but can provide unique avenues for inducing novel chemical transformations and can also be utilized for energy transductions, i.e., the energy in the photons can be captured in chemical bonds. Here, we developed a novel heterogeneous photocatalytic system that employs a lead-halide perovskite nanocrystal (NC) to capture photons and direct photogenerated holes to a surface bound transition metal Cu-site, resulting in a N-N heterocyclization reaction. The reaction starts from surface coordinated diamine substrates and requires two subsequent photo-oxidation events per reaction cycle. We establish a photocatalytic pathway that incorporates sequential inner sphere electron transfer events, photons absorbed by the NC generate holes that are sequentially funneled to the Cu-surface site to perform the reaction. The photocatalyst is readily prepared via a controlled cation-exchange reaction and provides new opportunities in photodriven heterogeneous catalysis.

Microbial community assembly and evolution in subseafloor sediment.

Bacterial and archaeal communities inhabiting the subsurface seabed live under strong energy limitation and have growth rates that are orders of magnitude slower than laboratory-grown cultures. It is not understood how subsurface microbial communities are assembled and whether populations undergo adaptive evolution or accumulate mutations as a result of impaired DNA repair under such energy-limited conditions. Here we use amplicon sequencing to explore changes of microbial communities during burial and isolation from the surface to the >5,000-y-old subsurface of marine sediment and identify a small core set of mostly uncultured bacteria and archaea that is present throughout the sediment column. These persisting populations constitute a small fraction of the entire community at the surface but become predominant in the subsurface. We followed patterns of genome diversity with depth in four dominant lineages of the persisting populations by mapping metagenomic sequence reads onto single-cell genomes. Nucleotide sequence diversity was uniformly low and did not change with age and depth of the sediment. Likewise, there was no detectable change in mutation rates and efficacy of selection. Our results indicate that subsurface microbial communities predominantly assemble by selective survival of taxa able to persist under extreme energy limitation.

Sensitizing Singlet Fission with Perovskite Nanocrystals.

The marriage of colloidal semiconductor nanocrystals and functional organic molecules has brought unique opportunities in emerging photonic and optoelectronic applications. Traditional semiconductor nanocrystals have been widely demonstrated to initiate efficient triplet energy transfer at the nanocrystal-acene interface. Herein, we report that unlike conventional semiconductor nanocrystals, lead halide perovskite nanocrystals promote an efficient Dexter-like singlet energy transfer to surface-anchored pentacene molecules rather than triplet energy transfer. Subsequently, molecular pentacene triplets are efficiently generated via singlet fission on the nanocrystal surface. Our demonstrated strategy not only unveils the obscure energy dynamics between perovskite nanocrystal and acenes, but also brings important perspectives of utilizing singlet fission throughout the solar spectrum.

Enhanced Charge Transport in 2D Perovskites via Fluorination of Organic Cation.

Organic-inorganic halide perovskites incorporating two-dimensional (2D) structures have shown promise for enhancing the stability of perovskite solar cells (PSCs). However, the bulky spacer cations often limit charge transport. Here, we report on a simple approach based on molecular design of the organic spacer to improve the transport properties of 2D perovskites, and we use phenethylammonium (PEA) as an example. We demonstrate that by fluorine substitution on the para position in PEA to form 4-fluorophenethylammonium (F-PEA), the average phenyl ring centroid-centroid distances in the organic layer become shorter with better aligned stacking of perovskite sheets. The impact is enhanced orbital interactions and charge transport across adjacent inorganic layers as well as increased carrier lifetime and reduced trap density. Using a simple perovskite deposition at room temperature without using any additives, we obtained a power conversion efficiency of >13% for (F-PEA)2MA4Pb5I16-based PSCs. In addition, the thermal stability of 2D PSCs based on F-PEA is significantly enhanced compared to those based on PEA.

Ultrafast probes at the interfaces of solar energy conversion materials.

Ultrafast carrier dynamics at interfaces plays a major role in governing solar energy conversion efficiency in solar conversion systems, especially in solar cells and photoelectrochemical devices. In this perspective, we discuss recent advances in ultrafast spectroscopic probes to understand the dynamics at such interfaces. Transient reflectance (TR) enables monitoring of the surface carriers that are within ∼10 nm of the surface or interface of interest. Crucial parameters such as surface recombination velocity and carrier diffusion can be determined. When a strong surface or interfacial field is present the reflectance spectrum will exhibit Franz-Kelydesh oscillations. Monitoring the transient formation or decay of such oscillations informs about the interfacial field and is referred to as transient photoreflectance (TPR). Such fields are helpful in designing systems in order to move carriers away from surfaces where photocorrosion can occur and towards catalytic surfaces. Finally, we discuss transient infrared attenuated total reflection (TATR) to probe the ultrafast reaction intermediates in a photo-driven chemical reaction.

Enhanced photoredox activity of CsPbBr3 nanocrystals by quantitative colloidal ligand exchange.

Quantitative colloidal ligand exchange on lead-halide perovskite nanocrystals (NCs) has remained a challenge due to the dynamic passivation of amines and carboxylic acids and the instability of core lead-halide perovskite systems. Here, we present a facile colloidal ligand exchange process using cinnamate acid ligands to quantitatively displace native oleate ligands on CsPbBr3 NCs. The short cinnamate ligands lead to a 23-fold enhancement of the electron-donating ability of the CsPbBr3 NCs when benzoquinone is used as an electron acceptor. A significantly increased photoredox activity is also observed in a complete photocatalytic reaction: the α-alkylation of aldehydes. Our results provide a new strategy to tune the photoredox activity of halide perovskite NCs as well as the exploration of NC-ligand interactions.

Enhanced Charge Transport by Incorporating Formamidinium and Cesium Cations into Two-Dimensional Perovskite Solar Cells.

Organic-inorganic hybrid two-dimensional (2D) perovskites (n≤5) have recently attracted significant attention because of their promising stability and optoelectronic properties. Normally, 2D perovskites contain a monocation [e.g., methylammonium (MA+ ) or formamidinium (FA+ )]. Reported here for the first time is the fabrication of 2D perovskites (n=5) with mixed cations of MA+ , FA+ , and cesium (Cs+ ). The use of these triple cations leads to the formation of a smooth, compact surface morphology with larger grain size and fewer grain boundaries compared to the conventional MA-based counterpart. The resulting perovskite also exhibits longer carrier lifetime and higher conductivity in triple cation 2D perovskite solar cells (PSCs). The power conversion efficiency (PCE) of 2D PSCs with triple cations was enhanced by more than 80 % (from 7.80 to 14.23 %) compared to PSCs fabricated with a monocation. The PCE is also higher than that of PSCs based on binary cation (MA+ -FA+ or MA+ -Cs+ ) 2D structures.

n-Type PbSe Quantum Dots via Post-Synthetic Indium Doping.

We developed a postsynthetic treatment to produce impurity n-type doped PbSe QDs with In3+ as the substitutional dopant. Increasing the incorporated In content is accompanied by a gradual bleaching of the interband first-exciton transition and concurrently the appearance of a size-dependent, intraband absorption, suggesting the controlled introduction of delocalized electrons into the QD band edge states under equilibrium conditions. We compare the optical properties of our In-doped PbSe QDs to cobaltocene treated QDs, where the n-type dopant arises from remote reduction of the PbSe QDs and observe similar behavior. Spectroelectrochemical measurements also demonstrate characteristic n-type signatures, including both an induced absorption within the electrochemical bandgap and a shift of the Fermi-level toward the conduction band. Finally, we demonstrate that the In3+ dopants can be reversibly removed from the PbSe QDs, whereupon the first exciton bleach is recovered. Our results demonstrate that PbSe QDs can be controllably n-type doped via impurity aliovalent substitutional doping.