Enhanced Förster resonance energy transfer on layered metal-dielectric hyperbolic metamaterials: an excellent platform for low-threshold laser action.

Förster resonance energy transfer (FRET) is a well-known physical phenomenon, which has been widely used in a variety of fields, spanning from chemistry, and physics to optoelectronic devices. In this study, giant enhanced FRET for donor-acceptor CdSe/ZnS quantum dot (QD) pairs placed on top of Au/MoO3 multilayer hyperbolic metamaterials (HMMs) has been realized. An enhanced FRET transfer efficiency as high as 93% was achieved for the energy transfer from a blue-emitting QD to a red-emitting QD, greater than that of other QD-based FRET in previous studies. Experimental results show that the random laser action of the QD pairs is greatly increased on a hyperbolic metamaterial by the enhanced FRET effect. The lasing threshold with assistance of the FRET effect can be reduced by 33% for the mixed blue- and red-emitting as QDs compared to the pure red-emitting QDs. The underlying origins can be well understood based on the combination of several significant factors, including spectral overlap of donor emission and acceptor absorption, the formation of coherent closed loops due to multiple scatterings, an appropriate design of HMMs, and the enhanced FRET assisted by HMMs.

All-carbon stretchable and cavity-free white lasers.

Flexible, stretchable, and bendable electronics and optoelectronics have a great potential for wide applications in smart life. An environmentally friendly, cost effective and wide-angle emission laser is indispensable for the emerging technology. In this work, circumvent the challenge issue, cavity-free and stretchable white light lasers based on all carbon materials have been demonstrated by integration of fluorescent carbon quantum dots (CQDs) and crumpled graphene. The typical emission spectrum of the cavity-free laser based on all-carbon materials has a CIE chromaticity coordinate of (0.30, 0.38) exhibiting an intriguing broadband white-light emission. The unprecedented and non-toxic stretchable and white light cavity-free lasers based on all-carbon materials can serve as next-generation optoelectronic devices for a wide range application covering solid-state lighting and future wearable technologies.

All-carbon stretchable and cavity-free white lasers: publisher's note.

This publisher's note contains corrections to [Opt. Express30, 20213 (2022)10.1364/OE.457921].

2D Material-Enabled Nanomechanical Bolometer.

We here describe a novel type of long-wavelength radiation detector that measures illumination intensity at room temperature through mechanical transduction. Compared to semiconductor-based bolometers, our nanomechanical detector exhibits low measurement noise and is inherently transparent and flexible. The presented solid-state device is based on a 2D-material film that acts as radiation absorber and detector of mechanical strain at the substrate-absorber interface. Optimization of the 2D material properties and realization of a novel edge-on device geometry combines unprecedented detectivity of 3.34 × 108 cm Hz1/2 W-1 with micrometer-scale spatial resolution. The observed combination of superior performance with the facile and scalable fabrication using only liquid processes shows the potential of the presented detector for future ubiquitous and wearable electronics.

Achieving High-Performance Perovskite Photovoltaic by Morphology Engineering of Low-Temperature Processed Zn-Doped TiO2 Electron Transport Layer.

Perovskite solar cells (PSCs) have become one of the most promising renewable energy converting devices. However, in order to reach a sufficiently high power conversion efficiency (PCE), the PSCs typically require a high-temperature sintering process to prepare mesostructured TiO2 as an efficient electron transport layer (ETL), which prohibits the PSCs from commercialization in the future. This work investigates a low-temperature synthesis of TiO2 nanocrystals and introduces a two-fluid spray coating process to produce a nanostructured ETL for the following deposition of perovskite layer. The temperature during the whole deposition process can be maintained under 150 °C. Compared to the typical planar TiO2 layer, the perovskite layer fabricated on a nanostructured TiO2 layer shows uniform compactness, preferred orientation, and high crystallinity, leading to reproducible and promising device performance. The detail mechanisms are revealed by the contact angle test, morphology characterization, grazing incident wide angle X-Ray scattering measurement, and space charge limited currents analysis. Finally, optimized device performance can be achieved through adequate Zn doping in the TiO2 layer, demonstrating an average PCE of 19.87% with champion PCE of 21.36%. The efficiency can maintain over 80% of its original value after 3000 h storage in ambient atmosphere. This study suggests a promising approach to offer high-efficiency PSCs using the low-temperature process.

QD/2D Hybrid Nanoscrolls: A New Class of Materials for High-Performance Polarized Photodetection and Ultralow Threshold Laser Action.

Nanoscrolls are a class of nanostructures where atomic layers of 2D materials are stacked consecutively in a coaxial manner to form a 1D spiral topography. Self-assembly of chemical vapor deposition grown 2D WS2 monolayer into quasi-1D van der Waals scroll structure instigates a plethora of unique physiochemical properties significantly different from its 2D counterparts. The physical properties of such nanoscrolls can be greatly manipulated upon hybridizing them with high-quantum-yield colloidal quantum dots, forming 0D/2D structures. The efficient dissociation of excitons at the heterojunctions of QD/2D hybridized nanoscrolls exhibits a 3000-fold increased photosensitivity compared to the pristine 2D-material-based nanoscroll. The synergistic effects of confined geometry and efficient QD scatterers produce a nanocavity with multiple feedback loops, resulting in coherent lasing action with an unprecedentedly low lasing threshold. Predominant localization of the excitons along the circumference of this helical scroll results in a 12-fold brighter emission for the parallel-polarized transition compared to the perpendicular one, as confirmed by finite-difference time-domain simulation. The versatility of hybridized nanoscrolls and their unique properties opens up a powerful route for not-yet-realized devices toward practical applications.

Photoelectronic memory based on nitride multiple quantum wells and the hybrid of graphene nanoflakes and a-IGZO film.

Optical memories are vitally important for the future development of high speed and low cost information technologies. Current optical memory devices still suffer from difficulties such as scaling-down of size, short-life expectancy, and non-volatility without the control of a gate electrode. To resolve these obstacles, a robust photoelectronic memory device is designed and demonstrated based on the integration of amorphous InGaZnO (a-IGZO), GNSs, and nitride multiple-quantum-wells light-emitting diode (MQWs LED). Utilizing the inherent nature of the band alignment between a-IGZO and graphene nanosheets (GNSs), electrons can transfer from a-IGZO to GNSs causing a persistent photoconductivity (PPC). With the long-lasting lifetime of PPC, the signal can be written optically and the encoded signal can be read both electrically and optically. The read and write processes reveal little current degradation for more than 10,000 sec, even repeated for more than hundred times. The device can convert invisible information to visible signal, and the encoded information can be simply erased under a reversed bias without a gate electrode. In addition, the memory device possesses a simple vertically stacked structure for 3D integration, and it is compatible with established technologies.

Electrically Pumped White-Light-Emitting Diodes Based on Histidine-Doped MoS2 Quantum Dots.

MoS2 quantum dots (QDs)-based white-light-emitting diodes (QD-WLEDs) are designed, fabricated, and demonstrated. The highly luminescent, histidine-doped MoS2 QDs synthesized by microwave induced fragmentation of 2D MoS2 nanoflakes possess a wide distribution of available electronic states as inferred from the pronounced excitation-wavelength-dependent emission properties. Notably, the histidine-doped MoS2 QDs show a very strong emission intensity, which exceeds seven times of magnitude larger than that of pristine MoS2 QDs. The strongly enhanced emission is mainly attributed to nitrogen acceptor bound excitons and passivation of defects by histidine-doping, which can enhance the radiative recombination drastically. The enabled electroluminescence (EL) spectra of the QD-WLEDs with the main peak around 500 nm are found to be consistent with the photoluminescence spectra of the histidine-doped MoS2 QDs. The enhanced intensity of EL spectra with the current increase shows the stability of histidine-doped MoS2 based QD-WLEDs. The typical EL spectrum of the novel QD-WLEDs has a Commission Internationale de l'Eclairage chromaticity coordinate of (0.30, 0.36) exhibiting an intrinsic broadband white-light emission. The unprecedented and low-toxicity QD-WLEDs based on a single light-emitting material can serve as an excellent alternative for using transition metal dichalcogenides QDs as next generation optoelectronic devices.

Seeing pressure in color based on integration of highly sensitive pressure sensor and emission tunable light emitting diode.

We demonstrate a highly sensitive, low-cost, environmental-friendly pressure sensor derived from a wool-based pressure sensor with wide pressure sensing range using wool bricks embedded with a Ag nano-wires. The easy fabrication and light weight allow portable and wearable device applications. Wth the integration of a light-emitting diode possessing multi-wavelength emission, we illustrate a hybrid multi-functional LED-integrated pressure sensor that is able to convert different applied pressures to light emission with different wavelengths. Due to the high sensitivity of the pressure sensor, the demonstration of acoustic signal detection has also been presented using sound of a metronome and a speaker playing a song. This multi-functional pressure sensor can be implemented to technologies such as smart lighting, health care, visible light communication (VLC), and other internet of things (IoT) applications.

Color-conversion efficiency enhancement of quantum dots via selective area nano-rods light-emitting diodes.

A large enhancement of color-conversion efficiency of colloidal quantum dots in light-emitting diodes (LEDs) with novel structures of nanorods embedded in microholes has been demonstrated. Via the integration of nano-imprint and photolithography technologies, nanorods structures can be fabricated at specific locations, generating functional nanostructured LEDs for high-efficiency performance. With the novel structured LED, the color-conversion efficiency of the existing quantum dots can be enhanced by up to 32.4%. The underlying mechanisms can be attributed to the enhanced light extraction and non-radiative energy transfer, characterized by conducting a series of electroluminescence and time-resolved photoluminescence measurements. This hybrid nanostructured device therefore exhibits a great potential for the application of multi-color lighting sources.

Ultraviolet and visible random lasers assisted by diatom frustules.

Random laser actions in ultraviolet and visible regions have been demonstrated based on the composites consisting of bio-inspired diatom frustules. Owing to the low optical loss derived from porous network of diatom structures, we report wide spectrum range random lasers arising from GaN film and Rh6G dye via using biological diatoms as scattering centers. Interestingly, both ultraviolet and visible-range random laser actions with very sharp peaks can be easily obtained, with the average length of optics cavity closed to the average size of diatom frustules in both cases, indicating the excellent optical confinement of diatom frustules. It is expected that the first proof of concept shown here can pave an avenue toward future broad-range random lasers and eco-friendly biophotonics devices with high performance and wide spectrum response.

A facile integration of zero- (I-III-VI quantum dots) and one- (single SnO2 nanowire) dimensional nanomaterials: fabrication of a nanocomposite photodetector with ultrahigh gain and wide spectral response.

Via the integration of nanocomposites comprising I-III-VI semiconductor quantum dots (QDs) decorated onto a single SnO2 nanowire (NW), we successfully fabricate an ultrahigh-sensitivity and wide spectral-response photodetector. Under the illumination of He-Cd laser (325 nm) with the photon energy larger than the band gap of SnO2 nanowire, remarkably, an ultrahigh photocurrent gain up to 2.5 × 10(5) has been achieved, and an enhancement factor can reach up to 700% (cf. bare SnO2 NW) as light illumination onto the wire with an excitation intensity of 15 W/m(2). Also, a high gain value up to 1.3 × 10(5) is attained with the excited photon energy (488 nm) smaller than the band gap of SnO2 nanowire. Several key factors contribute to ultrahigh photocurrent gain and wide spectral response. First, the decorated quantum dot processes an inherent nature of a large absorption coefficient above its band gap. Furthermore, the single SnO2 nanowire provides an excellent conduction path for the photogenerated carriers as well as bears a large surface-to-volume ratio so that the coupling strength with quantum dots can be greatly enhanced. Most importantly, the spatial separation of photogenerated electrons and holes can be easily achieved due to the charge transfer arising from a type II band alignment between QDs and SnO2 NW. This work thus demonstrates a new approach in which by selectively decorating suitable QDs the photocurrent gain of SnO2 NWs can be greatly enhanced and extended to a wide spectral range of photoresponse previously inaccessible, providing a very useful guideline to create cheap, nontoxic, and highly efficient photodetectors.

Speckle-Free, Angle-Free, Cavity-Free White Laser with a High Color Rendering Index.

The freedom from efficiency droop motivates monochromatic lasers to progress in general lighting applications due to the demand for more efficient and sustainable light sources. Still, a white light based on monochromatic lasers with high lighting quality, such as a high color rendering ability, an angle-independent output, and a speckle-free illumination, has not yet been fabricated nor demonstrated. Random lasers, with the special mechanism caused by multiple scattering, the angle-free emission, and the uncomplicated fabrication processes, inspire us to investigate the feasibility of utilizing them in general lighting. In this work, a white random laser with a high color rendering index (CRI) value, regardless of pumping energy and observing direction, was performed and discussed. We also investigated the stability of white RL as its CIE chromaticity coordinates exhibit negligible differences with increasing pump energy density, retaining its high-CRI measurement. Also, it exhibits angle-independent emission while having a high color rendering ability. After passing through a scattering film, it generated no speckles compared to the conventional laser. We demonstrated the advances in white laser illumination, showing that a white random laser is promising to be applied for high-brightness illumination, biological-friendly lighting, accurate color selections, and medical sensing.

Optically tunable and detectable magnetoelectric effects in the composite consisting of magnetic thin films and InGaN/GaN multiple quantum wells.

An optically tunable and detectable magnetoeletric (ME) effect has been discovered in the composite consisting of InGaN/GaN multiple quantum wells and magnetostrictive ferromagnetic Ni or FeCo thin films at room temperature. Due to the interactively optical and piezoelectric properties of nitride semiconductors, this composite provides an intriguing optically accessible system, in which the magnetoelectric effect can be both easily tuned and detected. The underlying mechanism can be well accounted for by the interplay among magnetostrictive, piezoelectric and optical transition. It thus offers a new paradigm to generate artificial material systems with magnetic/electric/optical inter-related/controllable properties.

Fabry-Perot Oscillation and Resonance Energy Transfer: Mechanism for Ultralow-Threshold Optically and Electrically Driven Random Laser in Quasi-2D Ruddlesden-Popper Perovskites.

The recently emerged metal-halide hybrid perovskite (MHP) possesses superb optoelectronic features, which have obtained great attention in solid-state lighting, photodetection, and photovoltaic applications. Because of its excellent external quantum efficiency, MHP has promising potential for the manifestation of ultralow threshold optically pumped laser. However, the demonstration of an electrically driven laser remains a challenge because of the vulnerable degradation of perovskite, limited exciton binding energy (Eb), intensity quenching, and efficiency drop by nonradiative recombinations. In this work, based on the paradigm of integration of Fabry-Perot (F-P) oscillation and resonance energy transfer, we observed an ultralow-threshold (∼250 µWcm-2) optically pumped random laser from moisture-insensitive mixed dimensional quasi-2D Ruddlesden-Popper phase perovskite microplates. Particularly, we demonstrated an electrically driven multimode laser with a threshold of ∼60 mAcm-2 from quasi-2D RPP by judicious combination of a perovskite/hole transport layer (HTL) and an electron transport layer (ETL) having suitable band alignment and thickness. Additionally, we showed the tunability of lasing modes and color by driving an external electric potential. Performing finite difference time domain (FDTD) simulations, we confirmed the presence of F-P feedback resonance, the light trapping effect at perovskite/ETL, and resonance energy transfer contributing to laser action. Our discovery of an electrically driven laser from MHP opens a useful avenue for developing future optoelectronics.

Exciton Manipulation for Enhancing Photoelectrochemical Hydrogen Evolution Reaction in Wrinkled 2D Heterostructures.

2D materials' junctions have demonstrated capabilities as metal-free alternatives for the hydrogen evolution reaction (HER). To date, the HER has been limited to heterojunctions of different compositions or band structures. Here, the potential of local strain modulation based on wrinkled 2D heterostructures is demonstrated, which helps to realize photoelectrocatalytically active junctions. By forming regions of high and low tensile strain in wrinkled WS2 monolayers, local modification of their band structure and internal electric field due to piezoelectricity is realized in the lateral direction. This structure produces efficient electron-hole pair generation due to light trapping and exciton funneling toward the crest of the WS2 wrinkles and enhances exciton separation. Additionally, the formation of wrinkles induces an air gap in-between the 2D layer and substrate, which reduces the interfacial scattering effect and consequently improves the charge-carrier mobility. A detailed study of the strain-dependence of the photocatalytic HER process demonstrates a 2-fold decrease in the Tafel slope and a 30-fold enhancement in exchange current density. Finally, optimization of the light absorption through functionalization with quantum dots produces unprecedented photoelectrocatalytic performance and provides a route toward the scalable formation of strain-modulated WS2 nanojunctions for future green energy generation.

Coupling between Pyroelectricity and Built-In Electric Field Enabled Highly Sensitive Infrared Phototransistor Based on InSe/WSe2/P(VDF-TrFE) Heterostructure.

The assorted utilization of infrared detectors induces the demand for more comprehensive and high-performance electronic devices that work at room temperature. The intricacy of the fabrication process with bulk material limits the exploration in this field. However, two-dimensional (2D) materials with a narrow band gap opening aid in infrared (IR) detection relatively, but the photodetection range is narrowed due to the inherent band gap. In this study, we report an unprecedented attempt at the coordinated use of both 2D heterostructure (InSe/WSe2) and the dielectric polymer (poly(vinylidene fluoride-trifluoroethylene), P(VDF-TrFE)) for both visible and IR photodetection in a single device. The remnant polarization due to the ferroelectric effect of the polymer dielectric enhances the photocarrier separation in the visible range, resulting in high photoresponsivity. On the other hand, the pyroelectric effect of the polymer dielectric causes a change in the device current due to the increased temperature induced by the localized heating effect of the IR irradiation, which results in the change of ferroelectric polarization and induces the redistribution of charge carriers. In turn, it changes the built-in electric field, the depletion width, and the band alignment across the p-n heterojunction interface. Consequently, the charge carrier separation and the photosensitivity are therefore enhanced. Through the coupling between pyroelectricity and built-in electric field across the heterojunction, the specific detectivity for the photon energy below the band gap of the constituent 2D materials can reach up to 1011 Jones, which is better than all reported pyroelectric IR detectors. The proposed approach combining the ferroelectric and pyroelectric effects of the dielectric as well as exceptional properties of the 2D heterostructures can spark the design of advanced and not-yet realized optoelectronic devices.

Self-Assembled Monolayer for Low-Power-Consumption, Long-Term-Stability, and High-Efficiency Quantum Dot Light-Emitting Diodes.

Quantum dot light-emitting diodes (QLEDs) are an emerging class of optoelectronic devices with a wide range of applications. However, there still exist several drawbacks preventing their applications, including long-term stability, electron leakage, and large power consumption. To circumvent the difficulties, QLEDs based on a self-assembled hole transport layer (HTL) with reduced device complexity are proposed and demonstrated. The self-assembled HTL is prepared from poly[3-(6-carboxyhexyl)thiophene-2,5-diyl] (P3HT-COOH) solution in N,N-dimethylformamide (DMF) forming a well-ordered monolayer on an indium-tin-oxide (ITO) anode. The P3HT-COOH monolayer has a smaller HOMO band offset and a sufficiently large electron barrier with respect to the CdSe/ZnS quantum dot (QD) emission layer, and thus it is beneficial for hole injection into and electron leakage blocking from the QD layer. Interestingly, the QLEDs exhibit an excellent conversion efficiency (97%) in turning the injected electron-hole pairs into light emission. The performance of the resulting QLEDs possesses a low turn-on voltage of +1.2 V and a maximum external quantum efficiency of 25.19%, enabling low power consumption with high efficiency. Additionally, those QLEDs also exhibit excellent long-term stability without encapsulation with over 90% luminous intensity after 200 days and superior durability with over 70% luminous intensity after 2 h operation under the luminance of 1000 cd m-2. The outstanding device features of our proposed QLEDs, including low turn-on voltage, high efficiency, and long-term stability, can advance the development of QLEDs toward facile large-area mass production and cost-effectiveness.

Uniaxial Strain Dependence on Angle-Resolved Optical Second Harmonic Generation from a Few Layers of Indium Selenide.

Indium selenide (InSe) is an emerging van der Waals material, which exhibits the potential to serve in excellent electronic and optoelectronic devices. One of the advantages of layered materials is their application to flexible devices. How strain alters the electronic and optical properties is, thus, an important issue. In this work, we experimentally measured the strain dependence on the angle-resolved second harmonic generation (SHG) pattern of a few layers of InSe. We used the exfoliation method to fabricate InSe flakes and measured the SHG images of the flakes with different azimuthal angles. We found the SHG intensity of InSe decreased, while the compressive strain increased. Through first-principles electronic structure calculations, we investigated the strain dependence on SHG susceptibilities and the corresponding angle-resolved SHG pattern. The experimental data could be fitted well by the calculated results using only a fitting parameter. The demonstrated method based on first-principles in this work can be used to quantitatively model the strain-induced angle-resolved SHG patterns in 2D materials. Our obtained results are very useful for the exploration of the physical properties of flexible devices based on 2D materials.

Enhancement of laser action in ZnO nanorods assisted by surface plasmon resonance of reduced graphene oxide nanoflakes.

We report the discovery of an enhancement of the random laser action in a nanocomposite comprising reduced graphene oxide nanoflakes and ZnO nanorods. We show that both emission intensity and lasing threshold exhibit an obvious improvement. Based on our theoretical calculations, the mechanism underlying the enhanced stimulated emission can be attributed to coupling between the optical transition and the surface plasmon resonance of the reduced graphene oxide nanoflakes, induced by the ZnO nanorod surface roughness. The approach we describe here will be very useful for the future development of high-efficiency optoelectronic devices and offers an alternative route for application of reduced graphene oxide.