AC-driven multicolor electroluminescence from a hybrid WSe2 monolayer/AlGaInP quantum well light-emitting device.

Light-emitting diodes (LEDs) are used widely, but when operated at a low-voltage direct current (DC), they consume unnecessary power because a converter must be used to convert it to an alternating current (AC). DC flow across devices also causes charge accumulation at a high current density, leading to lowered LED reliability. In contrast, gallium-nitride-based LEDs can be operated without an AC-DC converter being required, potentially leading to greater energy efficiency and reliability. In this study, we developed a multicolor AC-driven light-emitting device by integrating a WSe2 monolayer and AlGaInP-GaInP multiple quantum well (MQW) structures. The CVD-grown WSe2 monolayer was placed on the top of an AlGaInP-based light-emitting diode (LED) wafer to create a two-dimensional/three-dimensional heterostructure. The interfaces of these hybrid devices are characterized and verified through transmission electron microscopy and energy-dispersive X-ray spectroscopy techniques. More than 20% energy conversion from the AlGaInP MQWs to the WSe2 monolayer was observed to boost the WSe2 monolayer emissions. The voltage dependence of the electroluminescence intensity was characterized. Electroluminescence intensity-voltage characteristic curves indicated that thermionic emission was the mechanism underlying carrier injection across the potential barrier at the Ag-WSe2 monolayer interface at low voltage, whereas Fowler-Nordheim emission was the mechanism at voltages higher than approximately 8.0 V. These multi-color hybrid light-emitting devices both expand the wavelength range of 2-D TMDC-based light emitters and support their implementation in applications such as chip-scale optoelectronic integrated systems, broad-band LEDs, and quantum display systems.

Low Dose of X-Ray-Excited Long-Lasting Luminescent Concave Nanocubes in Highly Passive Targeting Deep-Seated Hepatic Tumors.

Chromium-doped zinc gallate, ZnGa2 O4 :Cr3+ (ZGC), is viewed as a long-lasting luminescence (LLL) phosphor that can avoid tissue autofluorescence interference for in vivo imaging detection. ZGC is a cubic spinel structure, a typical agglomerative or clustered morphology lacking a defined cubic shape, but a sphere-like feature is commonly obtained for the nanometric ZGC. The substantial challenge remains achieving a well-defined cubic feature in nanoscale. The process by which dispersed and well-defined concave cubic ZGC is obtained is described, exhibiting much stronger LLL in UV and X-ray excitation for the dispersed cubic ZGC compared with the agglomerative form that cannot be excited using X-rays with a low dose of 0.5 Gy. The cubic ZGC reveals a specific accumulation in liver and 0.5 Gy used at the end of X-ray excitation is sufficient for imaging of deep-seated hepatic tumors. The ZGC nanocubes show highly passive targeting of orthotopic hepatic tumors.