RESUMO
Liquid confined in a nanochannel or nanotube has exhibited a superfast transport phenomenon, providing an ideal heat and mass transfer platform to meet the increasingly stringent challenge of thermal management in developing high-power-density nanoelectronics and nanochips. However, understanding the thermal transport of confined liquid is currently lacking and is speculated to be fundamentally different from that of bulk counterparts due to the unprecedented thermodynamics of liquid in nanoconfined environments. Here, we report that the thermal conductivity of water confined in a silica nanotube is nearly 2-fold as that of bulk status. Further molecular dynamics simulations reveal that this unusual enhancement originates from the densification and reorientation of local hydrogen bonds close to the nanotubes. Thermal-confinement scaling law is established and quantitatively supported by comprehensive simulations with remarkable agreement. Our findings lay a theoretical foundation for designing nanofluidics-enabled cooling strategies and devices.
RESUMO
Identification of a thermodynamically stable polymorph is an important step in the early stage of drug development. Ritonavir (RIT) is a well-known case where the most stable polymorph II emerged after being marketed, leading to a loss of $250 million. Herein, we report the findings that routine melt crystallization can reveal the late-appearing polymorph II of RIT at small supercooling, but the probability of nucleation is very low. The addition of 30-50% polyethylene glycol (PEG) promotes the crystallization of Form II as the only phase at low supercooling, making it easier to detect in polymorphism screening. During the course of our research, a new polymorph, denoted Form III, was unexpectedly discovered, crystallizing as the major phase from neat RIT melts. Single crystals of Form III were grown from melt microdroplets. Benefiting from the ability of synchrotron radiation to detect weak diffraction signals that cannot be accessible by a laboratory diffractometer, a reasonable structure of Form III was solved with slight disorder relative to thiazole groups (P1 space group and Z' = 4). The thermodynamic stability ranking of the three true polymorphs is Form II > Form I > Form III, as opposed to the order of solubility. The capacity to efficiently reveal rich polymorphs, especially the kinetically hindered polymorph, and rapidly grow single crystals of a new phase for structure determination together highlights the necessity of incorporating melt crystallization into routine methods for pharmaceutical polymorphism screening.
Assuntos
Polietilenoglicóis , Ritonavir , Cristalização , TermodinâmicaRESUMO
NMR spectroscopy serves as an immensely powerful tool for component assignments and molecular structure elucidations. However, proton NMR spectra are generally trapped with spectral congestion caused by limited frequency differences and complex multiplets. 2D NMR can effectively relieve spectral congestion, but its resolution and acquisition efficiency are restricted by the broad spectral bandwidth. Herein, we introduce an NMR method based on chemical-shift-difference selection by chirp excitation to record high-resolution 2D NMR spectra for extracting coupling correlation networks and multiplet structures, suitable for measurements on complex samples. The performance of the proposed method is illustrated in determining diastereotopic methylene protons, small frequency-difference coupled proton pairs of furanose, pyranose and benzene rings. This study is expected to benefit molecular structure elucidation and composition analysis of complex samples in chemistry, biochemistry and metabonomics.
Assuntos
Prótons , Espectroscopia de Ressonância Magnética/métodos , Estrutura MolecularRESUMO
Crystallization of organic molecules is important in a wide range of scientific disciplines. However, in contrast to maturely studied crystallization of inorganic materials, the crystallization mechanisms of organic molecules involving nucleation and crystal growth are still poorly understood. Here, we used time-resolved cryogenic transmission electron microscopy to directly map the morphological evolution of amorphous cyclosporin A (CyA) nanoparticles during CyA crystallization. We successfully observed its initial nucleation and found that the amorphous CyA nanoparticles crystallized via a pathway cognate with oriented attachment, which is the nonclassical crystallization mechanism usually reported for inorganic compounds. Crystalline mesostructured intermediates (mesocrystals) were formed during crystallization. This study revealed clear and direct evidence of mesocrystal formation and oriented attachment in organic pharmaceuticals, providing new insights into the crystallization of organic molecules and theories of nonclassical crystallization.
Assuntos
Nanopartículas , Cristalização , Microscopia Eletrônica de Transmissão , Nanopartículas/química , Preparações FarmacêuticasRESUMO
Amorphous drug nanoparticles usually exhibit low storage stability. A comprehensive understanding of the molecular states and physicochemical properties of the product is indispensable for designing stable formulations. In the present study, an amorphous cyclosporin A (CyA) nanosuspension with a mean particle size of approximately 370 nm was prepared by wet bead milling with poloxamer 407 (P407). Interestingly, the prepared amorphous CyA nanoparticles were transformed into uniform CyA nanocrystals with a reduced mean particle size of approximately 200 nm during storage at 25 °C. The CyA nanocrystals were stably maintained for at least 1 month. The particle morphologies and molecular structures of the CyA nanosuspensions before and after storage were thoroughly characterized by cryogenic transmission electron microscopy and magic-angle spinning nuclear magnetic resonance spectroscopy, respectively. They revealed that the freshly prepared amorphous CyA nanoparticles (â¼370 nm) were secondary particles composed of aggregated primary particles with an estimated size of 50 nm. A portion of P407 was found to be entrapped at the gaps between the primary particles due to aggregation, while most of P407 was dissolved in the solution either adsorbing at the solid/liquid interface or forming polymeric micelles. The entrapped P407 is considered to play an important role in the destabilization of the amorphous CyA nanoparticles. The resultant CyA nanocrystals (â¼200 nm) were uniform single crystals of Form 2 hydrate and showed corner-truncated bipyramidal features. Owing to the narrow particle size distribution of the CyA nanocrystals, the rate of Ostwald ripening was slow, giving long-term stability to the CyA nanocrystals. This study provides new insights into the destabilization mechanism of amorphous drug nanoparticles.
Assuntos
Ciclosporina/química , Nanopartículas/química , Poloxâmero , Ciclosporina/administração & dosagem , Espectroscopia de Ressonância Magnética , Microscopia Eletrônica de Transmissão , Nanopartículas/administração & dosagem , Tamanho da Partícula , Solubilidade , SoluçõesRESUMO
Polymeric micelles are invaluable media as drug nanocarriers. Although knowledge of an interaction between the micelles is a key to understanding the mechanisms and developing the superior functions, the interaction potential surface between drug-incorporated polymeric micelles has not yet been quantitatively evaluated due to the extremely complex structure. Here, the interaction potential surface between drug-entrapped polymeric micelles was unveiled by combining a small-angle scattering experiment and a model-potential-free liquid-state theory. Triblock copolymer composed of poly(ethylene oxide) and poly(propylene oxide) was investigated over a wide concentration range (0.5-10.0 wt %). Effects of the entrapment of a water-insoluble hydrophobic drug, cyclosporin A, on the interaction were explored by comparing the interactions with and without the drug. The results directly clarified the high drug carrier efficiency in terms of the interaction between the micelles. In addition, an investigation based on density functional theory provided a deeper insight into the monomer contribution to the extremely stable dispersion of the nanocarrier.
Assuntos
Micelas , Polietilenoglicóis , Portadores de Fármacos , Interações Hidrofóbicas e Hidrofílicas , Espalhamento a Baixo ÂnguloRESUMO
As nations struggle to restart their economy after COVID-19 lockdowns, calls to include green investments in a pandemic-related stimulus are growing. Yet little research provides evidence of the effectiveness of a green stimulus. We begin by summarizing recent research on the effectiveness of the green portion of the 2009 American Recovery and Reinvestment Act on employment growth. Green investments are most effective in communities whose workers have the appropriate "green" skills. We then provide new evidence on the skills requirements of both green and brown occupations, as well as from occupations at risk of job losses due to COVID-19, to illustrate which workers are most likely to benefit from a pandemic-related green stimulus. We find similarities between some energy sector workers and green jobs, but a poor match between green jobs and occupations at risk due to COVID-19. Finally, we provide suggestive evidence on the potential for job training programs to help ease the transition to a green economy.
RESUMO
Drug-polymer inclusion complex (IC) has been viewed as a novel solid form of drugs for property modification. Nonetheless, our understanding of the formation mechanism remains limited. This work aims to provide insight into the molecular processes governing the structural construction of carbamazepine (CBZ) and griseofulvin (GSF) channel-type ICs in the presence of guest polymers. Leveraging microdroplet melt crystallization, we successfully unveiled the single-crystal structures of these ICs, enabling structural analysis, density functional theory calculations, and molecular dynamics simulations. The results collectively elucidate the disparity between CBZ and GSF channels in terms of their autonomy in the absence of guest polymers. CBZ molecules can spontaneously assemble into stable channel structures independently, capitalizing on their unique mortise-tenon architecture and robust π π interactions. Conversely, GSF channels lack sufficient support from weak Cl O and C-H π intermolecular interactions and necessitate the insertion of guest molecules to stabilize their structures. We further calculated the eleven structurally determined drug-polymer ICs and found that their channel sizes consistently fall within a narrow range of 3.81-5.18 Å although they adopt diverse approaches to construct channel structures. We anticipate that these findings will inspire continued exploration of this novel solid form, facilitating theoretical predictions and practical applications in pharmaceutical development.
Assuntos
Carbamazepina , Polímeros , Polímeros/química , Cristalização , Carbamazepina/química , Simulação de Dinâmica MolecularRESUMO
We previously established a nanoparticle-based drug delivery system (DDS) for high-dose ascorbic acid therapy by self-assembly of a lipid-modified ascorbic acid derivative, L-ascorbyl 2,6-dipalmitate (ASC-DP). The particles' morphology should be modified for effective DDSs. Here, we modulated the morphology of self-assembled ASC-DP nanoparticles using two different PEGylated lipids, distearoylphosphatidylethanolamine-polyethylene glycol (DSPE-PEG) and cholesterol-polyethylene glycol (Chol-PEG), with various PEG molecular weights. At the preparation molar ratio of 10 : 1 (ASC-DP/PEGylated lipid), rod-like nanoparticles emerged in the ASC-DP/DSPE-PEG system, whereas the ASC-DP/Chol-PEG system yielded tube-like nanoparticles. The internal structures of both rod-like ASC-DP/DSPE-PEG and tube-like ASC-DP/Chol-PEG nanoparticles were similar to that of repeated ASC-DP bilayers. The particles' surfaces featured PEGylated lipids, which stabilized the structure and dispersion of the nanoparticles. For both systems, the particle size increased slightly with increasing the PEGylated lipid's PEG molecular weight. Increasing the PEG molecular weight decreased the inner tunnel size of tube-like ASC-DP/Chol-PEG nanoparticles. A mechanism has been proposed for the rod-to-tube transformation. Surface-layer free-energy changes owing to the mixing of multiple lipids and PEG chain repulsion are thought to underlie the inner tunnels' formation. The rod-to-tube morphology of self-assembled ASC-DP nanoparticles can be modulated by controlling the PEGylated lipids' structure, including the lipid species and the PEG chain length.
Assuntos
Nanopartículas , Polietilenoglicóis , Polietilenoglicóis/química , Nanopartículas/química , Ácido Ascórbico/química , Lipídeos/químicaRESUMO
Previously, we reported the formation of 100-200 nm disk- and tube-like nanoparticles by hydration of L-ascorbyl 2,6-dipalmitate (ASC-DP) and distearoylphosphatidylethanolamine polyethylene glycol 2000 (DSPE-PEG) films prepared at an initial molar ratio of 2:1. This study investigated the feasibility of nanoparticle formation with higher ASC-DP loading. Although particle size distribution determined by dynamic light scattering showed a multimodal pattern including micro-sized particles at a molar ratio of 3:1, the mean particle size gradually decreased with a further increased molar ratio. Homogeneous ca. 240 nm nanoparticles with a unimodal size distribution were obtained at a molar ratio of 10:1. FE-TEM showed that the nanoparticles at a molar ratio of 10:1 were rod-shaped with a diameter of ca. 100 nm and a length of ca. 300 nm. After centrifugation, X-ray analysis of the nanoparticle precipitates showed that these rod-like nanoparticles were composed of a series of lamellar structures with 3.7 nm repeated units. The molar ratio of ASC-DP/DSPE-PEG in the nanoparticle precipitates determined by 1H NMR measurements was 68.8:1. The rod-like nanoparticles should be composed of a core-shell structure, where a small amount of DSPE-PEG covers the lamellar structure of ASC-DP. Further increase in the ASC-DP/DSPE-PEG molar ratio over 33:1 no longer provided nanoparticles. Hence, to prepare a stable ASC-DP nanoparticle suspension, it is necessary to prepare ASC-DP/DSPE-PEG films containing at least 3 mol% DSPE-PEG.
Assuntos
Nanopartículas , Fosfatidiletanolaminas , Micelas , Tamanho da Partícula , PolietilenoglicóisRESUMO
We investigated the effect of variation in the molecular weight of hypromellose (HPMC) on the oral absorption of fenofibrate (FFB) nanocrystal. Four types of HPMC with different molecular weights and sodium dodecyl sulfate (SDS) were used as dispersion stabilizers for FFB nanocrystal suspension. Wet-milling of FFB crystal with HPMC and SDS formed diamond-shaped FFB nanocrystals with approximately 150â¯nm diameter. HPMC was strongly adsorbed onto the FFB nanocrystal interface, and the amount of HPMC adsorbed was not dependent on the molecular weight of HPMC. However, the decrease in the molecular weight of adsorbed HPMC led to an improvement in the permeability of FFB nanocrystal through the mucin layer. The decrease in molecular weight of HPMC enhanced the flexibility of FFB nanocrystal interface and effectively inhibited its interaction with mucin. This led to faster diffusion of FFB nanocrystal through mucin. In vivo oral absorption studies showed rapid FFB absorption from FFB nanocrystal formulations using HPMC of low molecular weights. The present study revealed that the molecular weight of the dispersion stabilizer for drug nanocrystal formulation should be taken into consideration to achieve improved absorption of poorly water-soluble drugs after oral administration.