Mn2Ga2S5 and Mn2Al2Se5 van der Waals Chalcogenides: A Source of Atomically Thin Nanomaterials.

Layered chalcogenides containing 3d transition metals are promising for the development of two-dimensional nanomaterials with interesting magnetic properties. Both mechanical and solution-based exfoliation of atomically thin layers is possible due to the low-energy van der Waals bonds. In this paper, we present the synthesis and crystal structures of the Mn2Ga2S5 and Mn2Al2Se5 layered chalcogenides. For Mn2Ga2S5, we report magnetic properties, as well as the exfoliation of nanofilms and nanoscrolls. The synthesis of both polycrystalline phases and single crystals is described, and their chemical stability in air is studied. Crystal structures are probed via powder X-ray diffraction and high-resolution transmission electron microscopy. The new compound Mn2Al2Se5 is isomorphous with Mn2Ga2S5 crystallizing in the Mg2Al2Se5 structure type. The crystal structure is built by the ABCBCA sequence of hexagonal close-packing layers of chalcogen atoms, where Mn2+ and Al3+/Ga3+ species preferentially occupy octahedral and tetrahedral voids, respectively. Mn2Ga2S5 exhibits an antiferromagnetic-like transition at 13 K accompanied by the ferromagnetic hysteresis of magnetization. Significant frustration of the magnetic system may yield spin-glass behavior at low temperatures. The exfoliation of Mn2Ga2S5 layers was performed in a non-polar solvent. Nanolayers and nanoscrolls were observed using high-resolution transmission electron microscopy. Fragments of micron-sized crystallites with a thickness of 70-100 nanometers were deposited on a glass surface, as evidenced by atomic force microscopy.

Layered van der Waals Chalcogenides FeAl2Se4, MnAl2S4, and MnAl2Se4: Atomically Thin Triangular Arrangement of Transition-Metal Atoms.

Layered van der Waals (vdW) chalcogenides of 3d transition metals are a rich source of two-dimensional (2D) nanomaterials, in which atomically thin layers with the terminating chalcogen atoms exhibit promising functionality for novel spintronic devices. Here, we report on the synthesis, crystal growth, and magnetic properties of FeAl2Se4, MnAl2S4, and MnAl2Se4 ternary chalcogenides. Crystal structures are probed by powder X-ray diffraction, Mössbauer spectroscopy, and high-resolution transmission electron microscopy. We improve the structural models of FeAl2Se4 and MnAl2S4 and show that isostructural MnAl2S4 and MnAl2Se4 crystallize in the centrosymmetric R3̅̅m space group. In the crystal structure, transition metal and Al atoms mutually occupy the octahedral and tetrahedral voids of four close-packing chalcogen layers terminated by vdW gaps. The transition-metal atoms form a triangular arrangement inside the close-packing layers. As a result, FeAl2Se4 and MnAl2S4 show no long-range magnetic order in the studied temperature range. In the paramagnetic state, Fe and Mn possess effective magnetic moments of 4.99(2) and 5.405(6) µB, respectively. Furthermore, FeAl2Se4 enters a frozen spin-disordered state below 12 K.

Peroxidase-like Activity of CeO2 Nanozymes: Particle Size and Chemical Environment Matter.

The enzyme-like activity of metal oxide nanoparticles is governed by a number of factors, including their size, shape, surface chemistry and substrate affinity. For CeO2 nanoparticles, one of the most prominent inorganic nanozymes that have diverse enzymatic activities, the size effect remains poorly understood. The low-temperature hydrothermal treatment of ceric ammonium nitrate aqueous solutions made it possible to obtain CeO2 aqueous sols with different particle sizes (2.5, 2.8, 3.9 and 5.1 nm). The peroxidase-like activity of ceria nanoparticles was assessed using the chemiluminescent method in different biologically relevant buffer solutions with an identical pH value (phosphate buffer and Tris-HCl buffer, pH of 7.4). In the phosphate buffer, doubling CeO2 nanoparticles' size resulted in a two-fold increase in their peroxidase-like activity. The opposite effect was observed for the enzymatic activity of CeO2 nanoparticles in the phosphate-free Tris-HCl buffer. The possible reasons for the differences in CeO2 enzyme-like activity are discussed.

Synthesis and properties of thiol-modified CNC via surface tosylation.

SH-containing polymers and nanoparticles are a significant direction in the creation of novel materials. The aim of this work is the synthesis of cellulose nanocrystals (CNC) with a surface modified by tosyl functions (CNC-Ts) and their further modification into SH-containing nanocrystals (CNC-SH). CNC-Ts were synthesized in an aqueous-organic emulsion from never-dried particles, while maintaining the size and supramolecular structure of CNC; the content of Ts-functions is up to 2.5 mmol·g-1. Structure of the derivatives was analyzed by TEM, XRD, CP/MAS 13C NMR and FTIR spectroscopies. Nucleophilic substitution and hydrolysis of the obtained thioisouronium salts leads to the production of CNC-SH. To quantify SH-groups we used elemental analysis, potentiometric titration and Folin-Ciocalteu and Ellman's reagents. It is shown that SH-groups on the surface are partially oxidized and are involved in a dense network of hydrogen bonds. Rheological properties of CNC-SH hydrosols are close to those of CNC, addition of H2O2 at acidic pH leads to an increase in viscosity of the system; H2O2 added at neutral pH causes opposite effect - viscosity decreases. CNC-SH have a high capacity for sorption of Cr(VI) in acidic environments and exhibit photoreductive properties under UV irradiation.

Polyurethane/n-Octadecane Phase-Change Microcapsules via Emulsion Interfacial Polymerization: The Effect of Paraffin Loading on Capsule Shell Formation and Latent Heat Storage Properties.

Organic phase-change materials (PCMs) hold promise in developing advanced thermoregulation and responsive energy systems owing to their high latent heat capacity and thermal reliability. However, organic PCMs are prone to leakages in the liquid state and, thus, are hardly applicable in their pristine form. Herein, we encapsulated organic PCM n-Octadecane into polyurethane capsules via polymerization of commercially available polymethylene polyphenylene isocyanate and polyethylene glycol at the interface oil-in-water emulsion and studied how various n-Octadecane feeding affected the shell formation, capsule structure, and latent heat storage properties. The successful shell polymerization and encapsulation of n-Octadecane dissolved in the oil core was verified by confocal microscopy and Fourier-transform infrared spectroscopy. The mean capsule size varied from 9.4 to 16.7 µm while the shell was found to reduce in thickness from 460 to 220 nm as the n-Octadecane feeding increased. Conversely, the latent heat storage capacity increased from 50 to 132 J/g corresponding to the growth in actual n-Octadecane content from 25% to 67% as revealed by differential scanning calorimetry. The actual n-Octadecane content increased non-linearly along with the n-Octadecane feeding and reached a plateau at 66-67% corresponded to 3.44-3.69 core-to-monomer ratio. Finally, the capsules with the reasonable combination of structural and thermal properties were evaluated as a thermoregulating additive to a commercially available paint.

Natural Fibrous Materials Based on Fungal Mycelium Hyphae as Porous Supports for Shape-Stable Phase-Change Composites.

Adsorption of organic phase-change materials (PCMs) by the porous matrix of microfibrillar cellulose (MFC) is a simple and versatile way to prepare shape-stable phase-change composites, which are promising as sustainable thermoregulating additives to construction materials. However, due to MFC inherent morphology, the resulting composites have relatively low poured density that complicates their introduction in sufficient amounts, for instance, into mortar mixes. Unlike MFC, fungal mycelium has, by an order, less fibrils thickness and, thus, possesses significantly higher poured density. Herein, we studied the feasibility of fungal mycelium-based matrices as alternative biopolymeric porous supports for preparation of sustainable and shape-stable phase-change composites. Two methods were employed to prepare the porous mycelium-based supports. The first one was the solid-state fermentation, which resulted in partial biotransformation of MFCs to mycelium hyphae, while the second one was the liquid-state surface fermentation, used to cultivate the reference matrix of Trametes hirsuta hyphae. The phase-change composites were prepared by adsorption of model organic PCMs on porous biopolymer matrices. The mass ratio of support/PCM was 40/60 wt%. The composites were studied with respect to their structure, composition, poured density, latent heat storage properties, and thermal and shape stability. The employment of the partially transformed to mycelium-hyphae MFC fibers was found to be a suitable way to prepare phase-change composites with improved poured density while preserving a reasonable latent heat capacity and shape stability as compared to the MFC/PCM composites.

Degradation of Hybrid Drug Delivery Carriers with a Mineral Core and a Protein-Tannin Shell under Proteolytic Hydrolases.

Hybrid carriers with the mineral CaCO3/Fe3O4 core and the protein-tannin shell are attractive for drug delivery applications due to reliable coupling of anticancer drugs with protein-tannin complex and the possibility of remote control over drug localization and delivery by the external magnetic field. This study aims to elucidate the mechanisms of drug release via enzymatic degradation of a protein-tannin carrier shell triggered by proteolytic hydrolases trypsin and pepsin under physiological conditions. To do this, the carriers were incubated with the enzyme solutions in special buffers to maintain the enzyme activity. The time-lapse spectrophotometric and electron microscopy measurements were carried out to evaluate the degradation of the carriers. It was established that the protein-tannin complex demonstrates the different degradation behavior depending on the enzyme type and buffer medium. The incubation in trypsin solution mostly resulted in the protein shell degradation. The incubation in pepsin solution did not affect the protein component; however, the citric buffer stimulates the degradation of the mineral core. The presented results allow for predicting the degradation pathways of the carriers including the release profile of the loaded cargo under physiological conditions. The viability of 4T1 breast cancer cells with mineral magnetic carriers with protein-tannin shells was investigated, and their movement in the fields of action of the permanent magnet was shown.

New Type of Catalyst for Efficient Aerobic Oxidative Desulfurization Based On Tungsten Carbide Synthesized by the Microwave Method.

Herein, we present a new type of high-performance catalyst for aerobic oxidation of organosulfur compounds based on tungsten carbide. The synthesis of tungsten carbide was performed via microwave irradiation of the precursors, which makes it possible to obtain a catalyst in just 15 min. The synthesized catalyst was investigated by a variety of physicochemical methods: X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, electron microscopy, and N2 adsorption/desorption. It was shown that active centers containing tungsten in the transition oxidation state (+4) play a key role in the activation of oxygen. The main factors influencing the conversion of dibenzothiophene (DBT) were investigated. It should be noted that 100% conversion of DBT can be achieved under relatively mild conditions: 120 °C, 3 h, 6 bar, and 0.5% wt catalyst. The catalyst retained its activity for at least six oxidation/regeneration cycles. The simplicity and speed of synthesis of the proposed catalyst in combination with its high activity and stability open broad prospects for its further use both for oxidative desulfurization and for other reactions of aerobic oxidation of organic substrates.

Discovery of new boron-rich chalcogenides: orthorhombic B6X (X=S, Se).

New boron-rich sulfide B6S and selenide B6Se have been discovered by combination of high pressure - high temperature synthesis and ab initio evolutionary crystal structure prediction, and studied by synchrotron X-ray diffraction and Raman spectroscopy at ambient conditions. As it follows from Rietveld refinement of powder X-ray diffraction data, both chalcogenides have orthorhombic symmetry and belong to Pmna space group. All experimentally observed Raman bands have been attributed to the theoretically calculated phonon modes, and the mode assignment has been performed. Prediction of mechanical properties (hardness and elastic moduli) of new boron-rich chalcogenides has been made using ab initio calculations, and both compounds were found to be members of a family of hard phases.