Observation of Enhanced Long-Range Ferromagnetic Order in B-Site Ordered Double Perovskite Oxide Cd2CrSbO6.

A B-site ordered double perovskite oxide Cd2CrSbO6 was synthesized under high-pressure and high-temperature conditions. The compound crystallizes to a monoclinic structure with a space group of P21/n. The charge configuration is confirmed to be that of Cd2+/Cr3+/Sb5+. The magnetic Cr3+ ions form a tetrahedral structural frustrated lattice, while a long-range ferromagnetic phase transition is found to occur at TC = 16.5 K arising from the superexchange interaction via the Cr-O-Cd-O-Cr pathway. Electrical transport measurements indicate that Cd2CrSbO6 is an insulator that can be described by the Mott 3D variable range hopping mechanism. First-principles calculations reproduce well the ferromagnetic and insulating ground state of Cd2CrSbO6 with an energy band gap of 1.55 eV. The intrinsic ferromagnetic insulating nature qualifies Cd2CrSbO6 as a promising candidate for possible spintronics applications.

Monoclinic EuSn_{2}As_{2}: A Novel High-Pressure Network Structure.

The layered crystal of EuSn_{2}As_{2} has a Bi_{2}Te_{3}-type structure in rhombohedral (R3[over ¯]m) symmetry and has been confirmed to be an intrinsic magnetic topological insulator at ambient conditions. Combining ab initio calculations and in situ x-ray diffraction measurements, we identify a new monoclinic EuSn_{2}As_{2} structure in C2/m symmetry above ∼14 GPa. It has a three-dimensional network made up of honeycomblike Sn sheets and zigzag As chains, transformed from the layered EuSn_{2}As_{2} via a two-stage reconstruction mechanism with the connecting of Sn-Sn and As-As atoms successively between the buckled SnAs layers. Its dynamic structural stability has been verified by phonon mode analysis. Electrical resistance measurements reveal an insulator-metal-superconductor transition at low temperature around 5 and 15 GPa, respectively, according to the structural conversion, and the superconductivity with a T_{C} value of ∼4 K is observed up to 30.8 GPa. These results establish a high-pressure EuSn_{2}As_{2} phase with intriguing structural and electronic properties and expand our understandings about the layered magnetic topological insulators.

Pressure-induced superconductivity in a three-dimensional topological material ZrTe5.

As a new type of topological materials, ZrTe5 shows many exotic properties under extreme conditions. Using resistance and ac magnetic susceptibility measurements under high pressure, while the resistance anomaly near 128 K is completely suppressed at 6.2 GPa, a fully superconducting transition emerges. The superconducting transition temperature Tc increases with applied pressure, and reaches a maximum of 4.0 K at 14.6 GPa, followed by a slight drop but remaining almost constant value up to 68.5 GPa. At pressures above 21.2 GPa, a second superconducting phase with the maximum Tc of about 6.0 K appears and coexists with the original one to the maximum pressure studied in this work. In situ high-pressure synchrotron X-ray diffraction and Raman spectroscopy combined with theoretical calculations indicate the observed two-stage superconducting behavior is correlated to the structural phase transition from ambient Cmcm phase to high-pressure C2/m phase around 6 GPa, and to a mixture of two high-pressure phases of C2/m and P-1 above 20 GPa. The combination of structure, transport measurement, and theoretical calculations enable a complete understanding of the emerging exotic properties in 3D topological materials under extreme environments.

Superconductivity in Pristine 2H_{a}-MoS_{2} at Ultrahigh Pressure.

As a follow-up of our previous work on pressure-induced metallization of the 2H_{c}-MoS_{2} [Chi et al., Phys. Rev. Lett. 113, 036802 (2014)PRLTAO0031-900710.1103/PhysRevLett.113.036802], here we extend pressure beyond the megabar range to seek after superconductivity via electrical transport measurements. We found that superconductivity emerges in the 2H_{a}-MoS_{2} with an onset critical temperature T_{c} of ca. 3 K at ca. 90 GPa. Upon further increasing the pressure, T_{c} is rapidly enhanced beyond 10 K and stabilized at ca. 12 K over a wide pressure range up to 220 GPa. Synchrotron x-ray diffraction measurements evidenced no further structural phase transition, decomposition, and amorphization up to 155 GPa, implying an intrinsic superconductivity in the 2H_{a}-MoS_{2}. DFT calculations suggest that the emergence of pressure-induced superconductivity is intimately linked to the emergence of a new flat Fermi pocket in the electronic structure. Our finding represents an alternative strategy for achieving superconductivity in 2H-MoS_{2} in addition to chemical intercalation and electrostatic gating.

Proton ordering dynamics of H2O ice.

From high precision measurements of the complex dielectric constant of especially prepared samples of H2O, we identify the onset temperatures of the phase transition into and out of ice XI from ice Ih to occur at TIh-XI = 58.9 K and TXI-Ih = 73.4 K. For D2O, TIh-XI = 63.7 K and TXI-Ih = 78.2 K. A triple point is identified to exist at 0.07 GPa and 73.4 K for H2O and 0.08 GPa and 78.2 K for D2O where ices Ih, II and XI coexist. A first order phase transition with kinetic broadening associated with proton ordering dynamics is identified at 100 K.

Pressure-induced metallization of molybdenum disulfide.

X-ray diffraction, Raman spectroscopy, and electrical conductivity measurements of molybdenum disulfide MoS(2) are performed at pressures up to 81 GPa in diamond anvil cells. Above 20 GPa, we find discontinuous changes in Raman spectra and x-ray diffraction patterns which provide evidence for isostructural phase transition from 2H(c) to 2H(a) modification through layer sliding previously predicted theoretically. This first-order transition, which is completed around 40 GPa, is characterized by a collapse in the c-lattice parameter and volume and also by changes in interlayer bonding. After the phase transition completion, MoS(2) becomes metallic. The reversibility of the phase transition is identified from all these techniques.

Discovery of Dome-Shaped Superconducting Phase and Anisotropic Transport in a van der Waals Layered Candidate NbIrTe4 under Pressure.

The unique electronic structure and crystal structure driven by external pressure in transition metal tellurides (TMTs) can host unconventional quantum states. Here, the discovery of pressure-induced phase transition at ≈2 GPa, and dome-shaped superconducting phase emerged in van der Waals layered NbIrTe4 is reported. The highest critical temperature (Tc ) is ≈5.8 K at pressure of ≈16 GPa, where the interlayered Te-Te covalent bonds form simultaneously derived from the synchrotron diffraction data, indicating the hosting structure of superconducting evolved from low-pressure two-dimensional (2D) phase to three-dimensional (3D) structure with pressure higher than 30 GPa. Strikingly, the authors have found an anisotropic transport in the vicinity of the superconducting state, suggesting the emergence of a "stripe"-like phase. The dome-shaped superconducting phase and anisotropic transport are possibly due to the spatial modulation of interlayer Josephson coupling .

Superlattice induced by electron-beam irradiation in magnetic ferroelectric BiMnO(3).

Single-phased polycrystalline BiMnO(3) (hereinafter abbreviated as BMO) ceramic was fabricated via high-pressure solid-state reaction. Microstructure modification of selective grains, signalled by emergence of superlattice diffraction, was scrutinized by means of electron diffraction (ED) combined with high-resolution transmission electron microscopy (HRTEM). It was clearly evidenced that the well established C 2 monoclinic substructure (a = 9.53 Å, b = 5.61 Å, c = 9.85 Å and ß = 110.67°) of BMO (Atou et al 1999 J. Solid State Chem. 145 639) is metastable and prone to be transformed to a new pseudocubic superstructure (a≈b≈c≈15.8 Å and α≈ß≈γ≈90°) (Yang et al 2006 Phys. Rev. B 73 024114) when irradiated continuously by an electron beam. Magnetization measurement unveiled a unique ferromagnetic phase transition at 103 K, which corroborated our speculation that as-prepared BMO ceramic is free of polymorphism at ambient conditions.

Pressure-driven dome-shaped superconductivity and electronic structural evolution in tungsten ditelluride.

Tungsten ditelluride has attracted intense research interest due to the recent discovery of its large unsaturated magnetoresistance up to 60 T. Motivated by the presence of a small, sensitive Fermi surface of 5d electronic orbitals, we boost the electronic properties by applying a high pressure, and introduce superconductivity successfully. Superconductivity sharply appears at a pressure of 2.5 GPa, rapidly reaching a maximum critical temperature (Tc) of 7 K at around 16.8 GPa, followed by a monotonic decrease in Tc with increasing pressure, thereby exhibiting the typical dome-shaped superconducting phase. From theoretical calculations, we interpret the low-pressure region of the superconducting dome to an enrichment of the density of states at the Fermi level and attribute the high-pressure decrease in Tc to possible structural instability. Thus, tungsten ditelluride may provide a new platform for our understanding of superconductivity phenomena in transition metal dichalcogenides.

Cryogenic implementation of charging diamond anvil cells with H2 and D2.

A cryogenic loading system for introducing H(2) and D(2) into the diamond anvil cell has been designed and constructed. The integration of pressure loading mechanism, ruby fluorescence spectrometer, and microscope camera allows for in situ tuning and calibrating the pressure. The performance of the system has been demonstrated by successful synthesis of hydride and deuteride of transition metal and rare earth metal. Our cryogenic methodology features facile start-over of loading and in situ electrical resistance measurement of as-synthesized sample.