Separation and quantification of RNA molecules using size-exclusion chromatography hyphenated with inductively coupled plasma-mass spectrometry.

The hyphenation of SEC with ICP-MS was successfully applied to RNA quantification. The developed method combines the separation technique for large biomolecules and element selective detection of ICP-MS. The separation of RNA molecules was performed under the SEC condition without additive reagents such as salts to prevent the adhesion of RNA molecules on the column resin. Fragments of RNA, which were commercially available as a ladder marker solution and certified reference materials, were successfully separated and analyzed by measuring ³¹P⁺ with this method. RNA was quantified with good repeatability (RSD of peak area; 2.7%, n = 3) and linearity (R² = 0.999) using a P standard solution as a calibrant. LOD and absolute detection limit of RNA were 6.7 µg/kg and 67 pg, respectively, which were equal to the values obtained by the analysis of a P standard solution. The accuracy of the proposed measurement was evaluated by measuring certified reference materials of RNA solutions for quantitative analysis (NMIJ CRM 6204-a). The results obtained by this method agreed with the certified values within uncertainty. The proposed analysis method, which demonstrates good accuracy and high precision and is free from interference by nucleotide analogues, qualifies as a method of quality control for the RNA synthesis and extraction process.

Combination of isotope dilution with liquid chromatography-inductively coupled plasma mass spectrometry for the simultaneous monitoring and evaluation of cadmium and inorganic arsenic in polished rice.

A new monitoring and evaluation technique for cadmium (Cd) and inorganic arsenic (i-As) in rice was developed, where the isotope dilution (ID) method was applied in combination with high performance liquid chromatography-inductively coupled plasma mass spectrometry (LC-ICP-MS), following heat-assisted extraction. Cadmium and i-As in a rice sample were extracted using the HNO3-H2O2 extractant, and an appropriate amount of enriched 111Cd was spiked into it. Cadmium and As species were measured simultaneously by LC-ICP-MS. The cadmium concentration was calculated from the isotope dilution analysis, and i-As was determined by the comparison (1 point calibration) method using additional 111Cd as an internal standard. The proposed method provides accurate and precise determination of Cd based on the isotope dilution analysis. Moreover, it can be applied to a rapid screening test to find contaminated rice samples, by means of monitoring the intensity ratios of natural 111Cd and i-As to the additional 111Cd. The developed technique was applied to analyzing multiple rice reference materials, and the measurement results of Cd and i-As agreed with the certified values within the uncertainty range. It is noted that the grain size of rice samples does not affect the extraction data, when the rice sample is crushed into powder less than 850 µm. The proposed method was very useful for the monitoring and evaluation of Cd and i-As in rice as a precise analytical method as well as a screening method.

Migration of trace elements and radioisotopes to various fractions of solid wastes generated as a result of the sewage sludge incineration process.

The research was aimed at providing new knowledge in the field of chemical characteristics of solid waste generated in the process of combustion of sewage sludge in fluidized bed furnaces. The research material consisted of disposed fluidized beds (DFB), sewage sludge ash (SSA) and air pollution control residues (APC) from three Polish installations for the thermal treatment of sewage sludge. Natural radionuclides as well as anthropogenic isotope 137Cs were determined in the tested materials and the migration of a wide spectrum of trace elements to various waste fractions generated in the process of sewage sludge combustion was examined. It was observed that both radioisotopes and most of the trace elements determined accumulate in SSA and DFB, while the APC fraction contains a much smaller amount of them. The exceptions are mercury and selenium, whose volatile compounds migrate to the exhaust gas dedusting system and accumulate in the APC fraction (up to 40 mg/kg and 13 mg/kg, respectively). A potential threat from the 226Ra isotope in SSA is identified in the context of the management of this waste in the production of building materials because the typical activity of 226Ra in SSA collected from areas with very low Ra content in natural environment exceeds 1.5-6 times the activity of this isotope in conventional cement mixtures. When managing SSA and DFB, special attention should be paid to the content of metalloids such as As, B and Se, due to the high content of mobile forms of these elements in the mentioned materials.

Identification of possible technical problems in determination of the major inorganic constituents of brown-rice flour by evaluating proficiency test results.

To support skill upgrading in analysis of inorganic constituents of environmental and food samples, the National Metrology Institute of Japan (NMIJ) and the National Food Research Institute (NFRI) have organized a proficiency test (PT) of determination of Mn, Fe, Cu, Zn, As, and Cd in brown-rice flour based on the international standard (ISO/IEC 17043:2010). One hundred and thirty-three sets of reports were assessed by use of the E(n)-number and z-score approaches in accordance with ISO/IEC 17043 and the international harmonized protocol for PT. The PT results and analytical procedures, reported in detail, were reviewed, and possible technical reasons for questionable or unsatisfactory results are discussed.

Elimination of spectral interference of 87Rb with 87Sr during ICP-MS measurements using a chromatographic technique.

A new chromatographic separation technique was developed for the measurement of the strontium (Sr) isotope abundance ratio using inductively coupled plasma mass spectrometry (ICP-MS). This technique, LC-ICP-MS, utilizes the addition of 18-crown-the eluent and an ODS column. The technique completely eliminates the spectral interference of 87Rb (an isobar of 87Sr) with 87Sr during the ICP-MS measurement. 18-Crown-6 selectively forms a clathrate compound with some metals. When the Sr isotope abundances are measured using LC-ICP-MS with an ODS column, the addition of a specific amount of 18-crown-6 to the HNO3/0.1% methanol eluent elongates the retention time of Rb. Therefore, Rb can be completely separated from Sr using LC because Rb is captured into the 18-crown-6 molecule and forms a clathrate compound. The technique enables the measurement of Sr isotope abundance ratios easily, even in the presence of a large amount of Rb. The proposed technique was applied to the measurement of Sr isotope abundance ratios in rice samples. To validate the LC-ICP-MS technique, a fraction containing Sr was collected, and the 87Sr/86Sr isotope ratio was precisely measured using ICP-MS.

An online internal standard technique for high-performance liquid chromatography-inductively coupled plasma mass spectrometry (HPLC-ICP-MS).

An online internal standard correction technique for high-performance liquid chromatography-inductively coupled plasma mass spectrometry (HPLC-ICP-MS) was designed using an autosampler system equipped with HPLC to improve the analytical precision. The autosampler was programed to operate in the following sequence: it first takes up a portion of sample solution, rinses the nozzle, sucks air as a spacer, takes an internal standard solution and finally injects all of them into a sampling loop through an injection valve. The repeatability of the sampling (amount 20 µL) was improved from 2.5 to 1.2% using the online internal standard technique. This technique was applied to As speciation in food samples, since food safety monitoring requires high precision and high sample throughput. Rhenium was very suitable as an internal standard element due to its retention time, peak shape and water solubility. This technique effectively improved the analytical precision of the As speciation and got rid of the operation of adding an internal standard solution into samples.

Preparation and certification of hijiki reference material, NMIJ CRM 7405-a, from the edible marine algae hijiki (Hizikia fusiforme).

A certified reference material, NMIJ CRM 7405-a, for the determination of trace elements and As(V) in algae was developed from the edible marine hijiki (Hizikia fusiforme) and certified by the National Metrology Institute of Japan (NMIJ), the National Institute of Advanced Industrial Science and Technology (AIST). Hijiki was collected from the Pacific coast in the Kanto area of Japan, and was washed, dried, powdered, and homogenized. The hijiki powder was placed in 400 bottles (ca. 20 g each). The concentrations of 18 trace elements and As(V) were determined by two to four independent analytical techniques, including (ID)ICP-(HR)MS, ICP-OES, GFAAS, and HPLC-ICP-MS using calibration solutions prepared from the elemental standard solution of Japan calibration service system (JCSS) and the NMIJ CRM As(V) solution, and whose concentrations are certified and SI traceable. The uncertainties of all the measurements and preparation procedures were evaluated. The values of 18 trace elements and As(V) in the CRM were certified with uncertainty (k = 2).

Speciation analysis of Gadolinium-based contrast agents using aqueous eluent-hydrophilic interaction liquid chromatography hyphenated with inductively coupled plasma-mass spectrometry.

Gadolinium chelates are widely used as contrast agents for magnetic resonance imaging (MRI). In recent decades, the amount of Gd in river water has been increasing owing to the input of Gd-based contrast agents. To identify and quantify the Gd-based contrast agents in river water, the novel technique of hydrophilic interaction liquid chromatography (HILIC) hyphenated with inductively coupled plasma-mass spectrometry (ICP-MS) was developed. To avoid deposition of carbon on the ICP-MS interface, a mobile phase consisting of an ammonium acetate buffer diluted with pure water was applied to separate Gd-based contrast agents. Despite the absence of an organic solvent in the mobile phase, six Gd-based contrast agents, Gd-DTPA, Gd-EOB-DTPA, Gd-DOTA, Gd-DTPA-BMA, Gd-BT-DO3A, and Gd-HP-DO3A, were successfully separated. This technique was applied for river water samples. As a result, Gd-DOTA, Gd-BT-DO3A, and Gd-HP-DO3A were observed from the sample near the outfall of a wastewater treatment plant (WWTP), indicating that at least some of the Gd-based contrast agents are passed through treatment in a WWTP. In addition to Gd-based contrast agents, unidentified Gd compounds were found to be present in river water. These results infer that transformation and/or dissociation of Gd chelates may be caused during the treatment procedure in a WWTP.

Preparation and certification of arsenate [As(V)] reference material, NMIJ CRM 7912-a.

Arsenate [As(V)] solution reference material, National Metrology Institute of Japan (NMIJ) certified reference material (CRM) 7912-a, for speciation of arsenic species was developed and certified by NMIJ, the National Institute of Advanced Industrial Science and Technology. High-purity As(2)O(3) reagent powder was dissolved in 0.8 M HNO(3) solution and As(III) was oxidized to As(V) with HNO(3) to prepare 100 mg kg(-1) of As(V) candidate CRM solution. The solution was bottled in 400 bottles (50 mL each). The concentration of As(V) was determined by four independent analytical techniques-inductively coupled plasma mass spectrometry, inductively coupled plasma optical emission spectrometry, graphite furnace atomic absorption spectrometry, and liquid chromatography inductively coupled plasma mass spectrometry-according to As(V) calibration solutions, which were prepared from the arsenic standard of the Japan Calibration Service system and whose species was guaranteed to be As(V) by NMIJ. The uncertainties of all the measurements and preparation procedures were evaluated. The certified value of As(V) in the CRM is (99.53 +/- 1.67) mg kg(-1) (k = 2).

Simultaneous speciation analysis of inorganic arsenic and methylmercury in edible oil by high-performance liquid chromatography-inductively coupled plasma mass spectrometry.

A simultaneous speciation method of arsenic and mercury species by inductively coupled plasma mass spectrometry with a reversed-phase C18 ODS column was developed. The separation of inorganic arsenic (iAs) from As species and inorganic mercury (iHg) from methylmercury (MeHg) were achieved by HPLC with a single mobile phase containing ion-pair reagent and l-cysteine. The limits of detection of iAs and MeHg were 0.05 ng g-1 as As and 0.09 ng g-1 as Hg, respectively. The simultaneous extraction, i-As and MeHg from in edible oil were achieved using 2% (w/w) tetramethylammonium hydroxide (TMAH) solution. The proposed method was successfully applied to the food matrix type CRMs. When the simultaneous speciation was applied to several kinds of edible oil, iAs and MeHg were founded in the concentration range of 0.001 mg kg-1 to 0.010 mg kg-1 and 1.21 ng g-1 to 10.18 ng g-1, respectively.

[Introduction of JCTLM activity and recent topics].

The best way to compare laboratory test results is the establishment of common reference systems such as reference materials and procedures throughout the world. Recently, the concept of traceability has become quite familiar, even within the field of laboratory medicine. Traceability is the best tool to realize the comparability of measurements. The Joint Committee for Traceability in Laboratory Medicine (JCTLM) was founded in 2002 in order to establish a traceability system available throughout the world. The activity and recent topics of the JCTLM are introduced briefly in this paper.

Development of a highly precise ID-ICP-SFMS method for analysis of low concentrations of lead in rice flour reference materials.

Microwave digestion and isotope dilution inductively coupled plasma mass spectrometry (ID-ICP-SFMS) has been applied to the determination of Pb in rice flour. In order to achieve highly precise determination of low concentrations of Pb, the digestion blank for Pb was reduced to 0.21 ng g(-1) after optimization of the digestion conditions, in which 20 mL analysis solution was obtained after digestion of 0.5 g rice flour. The observed value of Pb in a non-fat milk powder certified reference material (CRM), NIST SRM 1549, was 16.8 +/- 0.8 ng g(-1) (mean +/- expanded uncertainty, k = 2; n = 5), which agreed with the certified value of 19 +/- 3 ng g(-1) and indicated the effectiveness of the method. Analytical results for Pb in three brown rice flour CRMs, NIST SRM 1568a, NIES CRM 10-a, and NIES CRM 10-b, were 7.32 +/- 0.24 ng g(-1) (n = 5), 1010 +/- 10 ng g(-1) (n = 5), and 1250 +/- 20 ng g(-1) (n = 5), respectively. The concentration of Pb in a candidate white rice flour reference material (RM) sample prepared by the National Metrology Institute of Japan (NMIJ) was observed to be 4.36 +/- 0.28 ng g(-1) (n = 10 bottles).

Certification of methylmercury in cod fish tissue certified reference material by species-specific isotope dilution mass spectrometric analysis.

A new cod fish tissue certified reference material, NMIJ CRM 7402-a, for methylmercury analysis was certified by the National Metrological Institute of Japan in the National Institute of Advanced Industrial Science and Technology (NMIJ/AIST). Cod fish was collected from the sea close to Japan. The cod muscle was powdered by freeze-pulverization and was placed into 600 glass bottles (10 g each), which were sterilized with gamma-ray irradiation. The certification was carried out using species-specific isotope dilution gas chromatography inductively coupled plasma mass spectrometry (SSID-GC-ICPMS), where (202)Hg-enriched methylmercury (MeHg) was used as the spike compound. In order to avoid any possible analytical biases caused by nonquantitative extraction, degradation and/or formation of MeHg in sample preparations, two different extraction methods (KOH/methanol and HCl/methanol extractions) were performed, and one of these extraction methods utilized two different derivatization methods (ethylation and phenylation). A double ID method was adopted to minimize the uncertainty arising from the analyses. In order to ensure not only the reliability of the analytical results but also traceability to SI units, the standard solution of MeHg used for the reverse-ID was prepared from high-purity MeHg chloride and was carefully assayed as follows: the total mercury was determined by ID-ICPMS following aqua regia digestion, and the ratio of Hg as MeHg to the total Hg content was estimated by GC-ICPMS. The certified value given for MeHg is 0.58 +/- 0.02 mg kg(-1) as Hg.

Effect of the chemical species of arsenic on sensitivity in graphite furnace atomic absorption spectrometry.

The sensitivity of graphite furnace atomic absorption spectrometry (GFAAS) to arsenobetaine (AB) was 1.3-times higher than to inorganic As. In order to understand the mechanism underlying this observation, the atomization processes for both chemical species were investigated in terms of the enthalpy change (DeltaH) during the atomization process in GFAAS. The enthalpy change of AB was slightly lower than that of inorganic As, which suggested that AB was atomized more efficiently than was inorganic As. Moreover, it was observed that some co-existing organic materials enhanced the analytical sensitivity of inorganic As. The sensitivity difference between inorganic As and AB depended upon the mechanisms of their atomization processes.

Simultaneous determination of trimethyl-and triethyllead in urban dust by species-specific isotope dilution/gas chromatography-inductively coupled plasma mass spectrometry.

Both (206)Pb-labeled trimethyllead (TML) and triethyllead (TEL) were synthesized from (206)Pb-enriched metallic Pb certified reference material (NIST SRM 983) and iodomethane or iodoethane through a one-process reaction in a closed system using centrifuge tubes, respectively. Organolead compounds in an urban dust reference material (BCR CRM 605) were extracted with an acetic acid/methanol (1:1) solution, which was mechanically shaken for 24 h. After adjusting the pH of the extracted solution to pH 5, the extracted organolead compounds were derivatized by tetrabutylammonium tetrabutylborate (TATB) and measured with GC-ICPMS. The analytical results of TML and TEL for BCR CRM 605 were 8.22 +/- 0.04 microg kg(-1) (mean +/- standard deviation, n = 3) and 1.12 +/- 0.06 microg kg(-1), respectively. The analytical results of TML agreed well with the certified value (7.9 +/- 1.2 microg kg(-1)).

Determination of Inorganic Arsenic in Grape Products Using HPLC-ICP-MS.

The inorganic arsenic (i-As) in grape products, in particular juice, wine and raisins, collected from the Japanese market was investigated. The concentrations of total As in nine grape concentrated juices ranged from 3 to 20 ng g-1, and more than 80% of the As was inorganic according to the results of speciation by HPLC-ICP-MS. Among them, four samples contained more than 10 ng g-1 of i-As, although 10 ng g-1 of i-As is the limit for apple juice recommended by the U.S. Food and Drug Administration. Moreover, more than 10 ng g-1 of i-As was found in some of the wine and raisin samples, with the total As concentrations ranging from 17 to 37 ng g-1. When fresh grapes were analyzed, As was mainly concentrated in the pericarp and a small amount was found in the fruit, although no As was observed in the branches and the juice. When grapes, including the pericarp, are processed, the As concentration in the products may increase during production processes such as drying, concentration, and ripening.

A Method for Methylmercury and Inorganic Mercury in Biological Samples Using High Performance Liquid Chromatography-Inductively Coupled Plasma Mass Spectrometry.

A new determination method was developed for the measurement of methylmercury (Me-Hg) and inorganic mercury (i-Hg) in biological samples using high-performance liquid chromatography-inductively coupled plasma-mass spectrometry (HPLC-ICP-MS) following alkaline extraction. Mercury species in biological samples were extracted with 10% (w/w) tetramethylammonium hydroxide (TMAH) solution at 80°C for 2 h. Methylmercury was completely separated from i-Hg by adamantyl type and octadecylsilyl type columns within 6 and 4 min using isocratic elution, respectively. The detection limits (3σ) of adamantyl and octadecylsilyl columns using the proposed system were 0.08 and 0.13 ng g-1 (as Hg), respectively. Inorganic Hg completely separates from Me-Hg without tailing. The proposed determination methods were applied to several biological certified reference materials (CRMs). The measurement results of Me-Hg obtained by the present method were in good agreement within the expanded uncertainties (k = 2) with the certified values. The analytical precision (n = 3) of Me-Hg was less than 2%, and the recoveries of Me-Hg and i-Hg were 101 ± 1 and 103 ± 3%, respectively. In addition, this method enables the determination of Me-Hg and i-Hg for 20 samples in 1 h.

Applications and Uncertainty Estimation of Single Level Standard Addition Method ICP-MS for Elemental Analysis in Various Matrix.

The standard addition method (SAM) based on gravimetric sample preparation was investigated as an approach for the removal or cancelling of matrix effects in measurements by inductively coupled plasma mass spectrometry (ICP-MS). Deduction of the equations and experimental confirmation of the method are both given in the present work. After measuring both spiked and non-spiked samples by ICP-MS, the concentration of an element could be calculated based on the signal intensity ratio to an internal standard. A practical example was provided for the measurement of Fe in a certified reference material (CRM), i.e. NMIJ CRM 7512-a (milk powder). The validity of the method had been confirmed by the results of international comparisons with various kinds of matrix, including bioethanol, human serum, biodiesel fuel, drinking water, infant formula milk power, and seafood. The suggested method had been applied to measurements of multiple elements in three CRMs, including tap water, milk powder, and tea leave powder, respectively.

A rapid monitoring method for inorganic arsenic in rice flour using reversed phase-high performance liquid chromatography-inductively coupled plasma mass spectrometry.

A new rapid monitoring method by means of high performance liquid chromatography-inductively coupled plasma mass spectrometry (HPLC-ICP-MS) following the heat-assisted extraction was developed for measurement of total inorganic arsenic species in rice flour. As(III) and As(V) eluted at the same retention time and completely separated from organoarsenic species by an isocratic elution program on a reversed phase column. Therefore, neither ambiguous oxidation of arsenite to arsenate nor the integration of two peaks were necessary to determine directly the target analyte inorganic arsenic. Rapid injection allowed measuring 3 replicates within 6min and this combined with a quantitative extraction of all arsenic species from rice flour by a 15min HNO3-H2O2 extraction makes this the fastest laboratory based method for inorganic arsenic in rice flour.

Arsenic Speciation and Cadmium Determination in Tobacco Leaves, Ash and Smoke.

The concentrations of arsenic (As) and cadmium (Cd) in the tobacco leaves, ash and smoke of 10 kinds of cigarettes collected from different countries worldwide were determined by ICP-MS after microwave-assisted digestion. Total As and Cd concentrations in the tobacco leaves ranged from 0.20 to 0.63 and 1.8 to 9.9 mg kg(-1), respectively. By the speciation analysis of As in tobacco leaves and ash by HPLC-ICP-MS following acid extraction, arsenite [As(III)] and arsenate [As(V)] were determined and trace amounts of monomethylarsonic acid (MMAA), dimethylarsinic acid (DMAA), trimethylarsine oxide (TMAO), tetramethylarsonium (TeMA) and some unidentified As species were also found. Arsenic speciation for smoke absorbed in an aqueous solution was carried out. The sum of the As species in tobacco leaves, ash and smoke was in good agreement with the result of total As determination in each sample, and the recoveries of speciation were 100 ± 10%. The distributions and the behaviors of As species were clarified.