Surface-Tailored Medium Entropy Alloys as Radically Low Overpotential Oxygen Evolution Electrocatalysts.

Numerous studies have explored new materials for electrocatalysts, but it is difficult to discover materials that surpass the catalytic activity of current commercially available noble metal electrocatalysts. In contrast to conventional transition metal alloys, high-entropy alloys (HEAs) have immense potential to maximize their catalytic properties because of their high stability and compositional diversity as oxygen evolution reactions (OERs). This work presents medium-entropy alloys (MEAs) as OER electrocatalysts to simultaneously satisfy the requirement of high catalytic activity and long-term stability. The surface of MEA electrocatalyst is tailored to suit the OER via anodizing and cyclic voltammetry activation methods. Optimized electrical properties and hydrophilicity of the surface enable an extremely low overpotential of 187 mV for achieving the current density of 10 mA cm-2 alkaline media. Furthermore, a combined photovoltaic-electrochemical system with MEA electrocatalyst and a perovskite/Si tandem solar cell exhibits a solar-to-hydrogen conversion efficiency of 20.6% for an unassisted hydrogen generation system. These results present a new pathway for designing sustainable high efficiency water splitting cells.

Enhanced Oxygen Evolution Electrocatalysis in Strained A-Site Cation Deficient LaNiO3 Perovskite Thin Films.

As the BO6 octahedral structure in perovskite oxide is strongly linked with electronic behavior, it is actively studied for various fields such as metal-insulator transition, superconductivity, and so on. However, the research about the relationship between water-splitting activity and BO6 structure is largely lacking. Here, we report the oxygen evolution reaction (OER) of LaNiO3 (LNO) by changing the NiO6 structure using compositional change and strain. The 5 atom % La deficiency in LNO resulted in an increase of the Ni-O-Ni bond angle and an expansion of bandwidth, enhancing the charge transfer ability. In-plane compressive strain derives the higher dz2 orbital occupancy, leading to suitable metal-oxygen bond strength for OER. Because of the synergistic effect of A-site deficiency and compressive strain, the overpotential (η) of compressively strained L0.95NO film is reduced to 130 mV at j = 30 µA/cm2 compared with nonstrained LNO (η = 280 mV), indicating a significant enhancement in OER.

Lead-Free Dual-Phase Halide Perovskites for Preconditioned Conducting-Bridge Memory.

Organometallic and all-inorganic halide perovskites (HPs) have recently emerged as promising candidate materials for resistive switching (RS) nonvolatile memory due to their current-voltage hysteresis caused by fast ion migration. Lead-free and all-inorganic HPs have been researched for non-toxic and environmentally friendly RS memory devices. However, only HP-based devices with electrochemically active top electrode (TE) exhibit ultra-low operating voltages and high on/off ratio RS properties. The active TE easily reacts to halide ions in HP films, and the devices have a low device durability. Herein, RS memory devices based on an air-stable lead-free all-inorganic dual-phase HP (AgBi2 I7 -Cs3 Bi2 I9 ) are successfully fabricated with inert metal electrodes. The devices with Au TE show filamentary RS behavior by conducting-bridge involving Ag cations in HPs with ultra-low operating voltages (<0.15 V), high on/off ratio (>107 ), multilevel data storage, and long retention times (>5 × 104 s). The use of a closed-loop pulse switching method improves reversible RS properties up to 103 cycles with high on/off ratio above 106 . With an extremely small bending radius of 1 mm, the devices are operable with reasonable RS characteristics. This work provides a promising material strategy for lead-free all-inorganic HP-based nonvolatile memory devices for practical applications.

Tailoring of Interfacial Band Offsets by an Atomically Thin Polar Insulating Layer To Enhance the Water-Splitting Performance of Oxide Heterojunction Photoanodes.

An important factor in the performance of photoelectrochemical water splitting is the band edge alignment of the photoelectrodes for efficient transport and transfer of photogenerated carriers. Many studies for improving charge transfer ability between the electrode and the electrolyte have been reported, while research to improve charge transfer at the interface of the photoactive semiconductor and the conducting substrate is largely lacking. Here, we demonstrate that the water-splitting performance of an oxide heterostructured photoelectrode can be increased 6-fold by inserting an atomically thin polar LaAlO3 interlayer compared with that of an oxide heterostructure without an insertion to modify interfacial band offsets. The electrically lowered Schottky barrier is driven by the atomically thin layer, and the charge transfer resistance between the oxides is reduced by up to 2 orders of magnitude upon insertion of LaAlO3, a wide-gap (5.6 eV) insulator. We show that the critical thickness of the polar layer for enhancing the charge transfer is 3 unit cells. The dipole moment from the polar sheets of LaAlO3 introduces an internal electric field, which modifies the effective band offsets in the device. This work serves as a proof of concept that photoelectrochemical performance can be improved by manipulating the band offsets of the heterostructure interface, suggesting a new design strategy for heterostructured water-splitting photoelectrodes.

Cilostazol inhibits the expression of hnRNP A2/B1 and cytokines in human dermal microvascular endothelial cells.

OBJECTIVES: hnRNP A2/B1 has been identified as a target antigen of anti-endothelial cell IgA antibody in patients with Behçet's disease (BD). In addition, increased expression of cellular hnRNP A2/B1 is stimulated by Streptococcus sanguinis or the sera from patients with BD. We aimed to investigate the effects of cilostazol on the expression of hnRNP A2/B1 and chemokines in human dermal microvascular endothelial cells (HDMECs). METHODS: Expression of hnRNP A2/B1, cytokines, and chemokines in HDMECs was induced by tumour necrosis factor (TNF)-α, interleukin (IL)-1ß, and lipopolysaccharide (LPS). HDMECs were treated with cilostazol (10 µM) and the inhibitory effects were evaluated with real-time polymerase chain reaction and immunocytochemistry. RESULTS: Expression of hnRNP A2/B1, CXCL1, CXCL2, CXCL8, and IL-1ß mRNA was significantly increased in HDMECs treated with all three stimulants. In addition, mRNA expression of hnRNP A2/B1 and inflammatory mediators was significantly inhibited in HDMECs treated with various stimulants with cilostazol pretreatment. Immunocytochemistry demonstrated that cilostazol pretreatment effectively inhibited the stimulant-induced increased expression of hnRNP A2/B1 in the nucleus and cytoplasm of HDMECs. CONCLUSIONS: Cilostazol pretreatment can reduce the excessive expression of inflammatory cytokines and chemokines and hnRNP A2/B1 by the BD-related stimulants, including TNF-α, IL-1ß, and LPS, in HDMECs. We suggest that cilostazol may have therapeutic efficacy in inhibiting the major inflammatory reaction in the pathogenesis of BD.

Treatment of periorbital syringoma by the pinhole method using a carbon dioxide laser in 29 Asian patients.

BACKGROUND: Pinhole method has been used to treat various types of scars and dermal tumors by making multiple small holes in target tissues of the deep dermis using an ablative 10,600-nm carbon dioxide (CO2) laser. OBJECTIVES: We prospectively investigated the efficacy and safety of using a CO2 laser to treat periorbital syringomas via the pinhole method. METHODS: A total of 29 patients with periorbital syringomas were treated with two sessions of CO2 laser treatment using the pinhole method at two-month intervals. Laser fluences were delivered under the following settings: pulse duration of 200 µs, frequency of 50 Hz, on time of 0.04, and an off time of 0.01. RESULTS: Among the 29 patients, 13 patients (44.8%) presented with small discrete papular syringomas, 10 (34.5%) had plaque-type lesions, and six (20.7%) had mixed lesions. Evaluation of the clinical results at 2 months after the second treatment session revealed marked clinical improvement (51-75%) in 10 of the 29 patients (34.5%), moderate clinical improvement (26-50%) in eight (27.6%), near-total improvement (≥ 75%) in seven (24.1%), and minimal improvement (0-25%) in four patients (13.8%). CONCLUSIONS: Our observations indicated that application of the pinhole method using a CO2 laser exerts positive therapeutic effects in Asian patients with periorbital syringomas.

Development and validation of an electronic medical record-based disease activity index for Behçet's disease.

OBJECTIVES: The disease activity of Behçet's disease is inadequately defined, and there is no consensus on how it should be measured. The aim of this study was to verify the usefulness of a simplified electronic medical record (EMR)-based activity index (EMRAI) for Behçet's disease. METHODS: A total of 73 Korean patients with Behçet's disease participated in this study. Two dermatologists interviewed each participant independently using two activity scoring systems: the EMRAI and the Behçet's Disease Current Activity Form (BDCAF). Overall agreement between raters, correlation between activity scoring indices, and total interview run-time were evaluated. RESULTS: The EMRAI significantly correlated with the BDCAF (Spearman's correlation coefficient, r=0.835), physician-assessed overall activity score (r=0.782), erythrocyte sedimentation rate (r=0.520) and C-reactive protein level (r=0.422). The weighted kappa score for inter-rater agreement of EMRAI showed very good reliability compared with that of BDCAF (0.894 and 0.693, respectively). The mean total run-time for the EMRAI was shorter than that required to administer the BDCAF (95 s and 115 s, respectively). CONCLUSIONS: The EMRAI, an EMR-based simplified activity index of Behçet's disease, facilitates rapid and simple gathering of disease activity data and clinical information.

Dermoscopic findings in radiation-induced alopecia after angioembolization.

BACKGROUND: Cases of non-scarring alopecia after endovascular brain surgery have been reported, but dermoscopic findings of these lesions have rarely been published. OBJECTIVE: To report the dermoscopic findings for alopecic skin lesions that developed after radiation exposure during angioembolization. METHODS: Dermoscopic examination was used to evaluate alopecic skin lesions in 10 patients who presented with post-angioembolization alopecia. RESULTS: The male to female ratio was 1:4, mean age 55.0 ± 12.3 years and mean duration to lesion development 3.4 ± 2.5 weeks. The rectangular-shaped lesions mostly occurred at the occiput and temple areas. Both yellow and black dots were the predominant dermoscopic findings in 60% (6/10) of patients, followed by short vellus hair (50%), peripilar sign (20%), broken hair (10%), coiled hair (10%) and white dots (10%). CONCLUSIONS: Alopecic skin lesions induced by radiation exposure during angioembolization share characteristic dermoscopy findings with alopecia areata. They may be misdiagnosed if a precise history is not obtained.

Pulmonary toxocariasis mimicking invasive aspergillosis in a patient with ulcerative colitis.

A 45-year-old-male who had underlying ulcerative colitis and presented with fever and dry cough. Initially, the patient was considered to have invasive aspergillosis due to a positive galactomannan assay. He was treated with amphotericin B followed by voriconazole. Nevertheless, the patient deteriorated clinically and radiographically. The lung biopsy revealed eosinophilic pneumonia, and ELISA for Toxocara antigen was positive, leading to a diagnosis of pulmonary toxocariasis. After a 10-day treatment course with albendazole and adjunctive steroids, the patient recovered completely without any sequelae. Pulmonary toxocariasis may be considered in patients with subacute or chronic pneumonia unresponsive to antibiotic agents, particularly in cases with eosinophilia.

Strain Engineering in Perovskites: Mutual Insight on Oxides and Halides.

Perovskite materials have garnered significant attention over the past decades due to their applications, not only in electronic materials, such as dielectrics, piezoelectrics, ferroelectrics, and superconductors but also in optoelectronic devices like solar cells and light emitting diodes. This interest arises from their versatile combinations and physiochemical tunability. While strain engineering is a recognized powerful tool for tailoring material properties, its collaborative impact on both oxides and halides remains understudied. Herein, strain engineering in perovskites for energy conversion devices, providing mutual insight into both oxides and halides is discussed. The various experimental methods are presented for applying strain by using thermal mismatch, lattice mismatch, defects, doping, light illumination, and flexible substrates. In addition, the main factors that are influenced by strain, categorized as structure (e.g., symmetry breaking, octahedral distortion), bandgap, chemical reactivity, and defect formation energy are described. After that, recent progress in strain engineering for perovskite oxides and halides for energy conversion devices is introduced. Promising methods for enhancing the performance of energy conversion devices using perovskites through strain engineering are suggested.

Safety evaluation of vitamin K2 (menaquinone-7) via toxicological tests.

This study aims to evaluate the safety of MK-7 produced by fermentation process using a Bacillus subtilis var. natto strain for human ingestion via acute oral toxicity, repeated dose 90-day oral toxicity, 28-day recovery test, and genotoxicity tests. The acute oral toxicity test results indicated that all subjects survived at the dose of 5000 mg/kg with no toxic effects. For the repeated dose 90-day oral toxicity test, MK-7 was administered to rats at 500, 1500, and 4500 mg/kg for 90 d. No abnormal findings were detected in clinical observations or in clinical pathological and histopathological examinations. The no-observed-adverse-effect level(NOAEL) was determined to be 4500 mg/kg/d, the maximum dose tested. For the evaluation of genotoxicity, reverse mutation, chromosomal aberration, and micronucleus tests were performed. In the reversion mutation test, vitamin K2 did not induce reversion in bacterial strains, and no chromosomal abnormality was observed in the chromosomal abnormality test using Chinese hamster lung cells. In the micronucleus test, micronuclei were not induced using ICR mouse bone marrow cells. All the toxicity test results suggest that vitamin K2 produced by fermentation processes using Bacillus subtilis var. natto induced no toxicological changes under the experimental conditions.

High-Performance Ferroelectric Thin Film Transistors with Large Memory Window Using Epitaxial Yttrium-Doped Hafnium Zirconium Gate Oxide.

Preventing ferroelectric materials from losing their ferroelectricity over a low thickness of several nanometers is crucial in developing multifunctional nanoelectronics. Epitaxially grown 5 at. % yttrium-doped Hf0.5Zr0.5O2 (YHZO) thin films exhibit an atomically smooth surface, an ability to maintain ferroelectricity even at a thickness of 10 nm, and excellent insulating properties, making them suitable for use as gate oxides in ferroelectric thin film transistors (FeTFTs). Through the epitaxial growth of a YHZO/La0.67Sr0.33MnO3 (LSMO)/SrTiO3 (STO) heterostructure, YHZO effectively retains its ferroelectricity and orthorhombic single phase, leading to enhancing electron mobility (∼19.74 cm2 V-1 s-1) and memory window (3.7 V) in the amorphous InGaZnO4 (a-IGZO)/YHZO/LSMO/STO FeTFTs. These FeTFTs demonstrate a consistent memory function with remarkable endurance (∼106 cycles) and retention (∼104 s). Furthermore, they sustain a constant memory window even under ±6 V bias stress for 104 s and exhibit excellent stability even under ±6 V/1 ms pulse cycling for 107 cycles. For comparison, a transistor with the same structure was fabricated using epitaxial nonferroelectric LaAlO3 (LAO) and epitaxial undoped Hf0.5Zr0.5O2 (HZO) as alternatives to YHZO. This study presents a novel approach to exploit the potential of YHZO in FeTFTs, contributing to the development of next-generation logic-in-memory.

MAPbBr3 Halide Perovskite-Based Resistive Random-Access Memories Using Electron Transport Layers for Long Endurance Cycles and Retention Time.

Recent studies have focused on exploring the potential of resistive random-access memory (ReRAM) utilizing halide perovskites as novel data storage devices. This interest stems from its notable attributes, including a high ON/OFF ratio, low operating voltages, and exceptional mechanical properties. Nevertheless, there have been reports indicating that memory systems utilizing halide perovskites encounter certain obstacles pertaining to their stability and dependability, mostly assessed through endurance and retention time. Moreover, the presence of these problems can potentially restrict their practical applicability. This study explores a resistive switching memory device utilizing MAPbBr3 perovskite, which demonstrates bipolar switching characteristics. The device fabrication procedure involves a low-temperature, all-solution process. For the purpose of enhancing the device's reliability, the utilization of TPBI(2,2',2″-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) as an electron transfer material on the MAPbBr3 switching layer was implemented for the first time. The formation and rupture of Ag filaments in the MAPbBr3 perovskite switching layer are attributed to reduction-oxidation reactions. The TPBI is involved in the regulation of filaments during the SET and RESET processes. Hence, it can be shown that the MAPbBr3 device incorporating TPBI exhibited about 1000 endurance cycles when subjected to continuous voltage pulses. Moreover, the device consistently maintained ON/OFF ratios above 107. In contrast, the original MAPbBr3 device without TPBI demonstrated a significantly lower endurance with only 90 cycles observed. In addition, the MAPbBr3 device integrated with TPBI exhibited a retention time exceeding 3 × 103 s. The findings of this research provide compelling evidence to support the notion that electron transfer materials have promise for the development of halide perovskite memory systems owing to their favorable attributes of dependability and stability.

Decellularized matrix bioink with gelatin methacrylate for simultaneous improvements in printability and biofunctionality.

Gelatin methacrylate (GelMA) bioink has been widely used in bioprinting because it is a printable and biocompatible biomaterial. However, it is difficult to print GelMA bioink without any temperature control because it has a thermally-sensitive rheological property. Therefore, in this study, we developed a temperature-controlled printing system in real time without affecting the viability of the cells encapsulated in the bioink. In addition, a skin-derived decellularized extracellular matrix (SdECM) was printed with GelMA to better mimic the native tissue environment compared with solely using GelMA bioink with the enhancement of structural stability. The temperature setting accuracy was calculated to be 98.58 ± 1.8 % for the module and 99.48 ± 1.33 % for the plate from 5 °C to 37 °C. The group of the temperature of the module at 10 °C and the plate at 20 °C have 93.84 % cell viability with the printable range in the printability window. In particular, the cell viability and proliferation were increased in the encapsulated fibroblasts in the GelMA/SdECM bioink, relative to the GelMA bioink, with a morphology that significantly spread for seven days. The gene expression and growth factors related to skin tissue regeneration were relatively upregulated with SdECM components. In the bioprinting process, the rheological properties of the GelMA/SdECM bioink were successfully adjusted in real time to increase printability, and the native skin tissue mimicked components providing tissue-specific biofunctions to the encapsulated cells. The developed bioprinting strategies and bioinks could support future studies related to the skin tissue reconstruction, regeneration, and other medical applications using the bioprinting process.

Decreased tissue and serum expression of galectin-7 in patients with hypertrophic scars.

Hypertrophic scars (HS) result from an imbalance between collagen biosynthesis and matrix degradation during wound healing. In this study a proteomics approach was used to compare the protein profiles of skin tissue obtained from patients with HS and healthy controls. One of the epidermal proteins, galectin-7 was markedly down-regulated in HS. Serum levels of galectin-7 in 27 patients with HS were less than 1/3 of those in 15 healthy controls. Tissue protein expression was subsequently evaluated using immunohistochemical staining on HS tissue and on serially-obtained control tissue during wound healing. Weaker galectin-7 immunoreactivity was detected along the cytoplasmic membrane of basal and suprabasal cells in samples from HS. In addition, galectin-7 was stained in the extracellular space of the upper papillary dermis in HS tissue. Ablative laser treatment, used to induce wound healing of healthy control tissue, demonstrated marked galectin-7 expression at the cytoplasmic membrane on days 3, 5, 14 and 21. Pronounced galectin-7 staining at the upper papillary dermis was detected on days 1, 3 and 10. These results suggest that the differences in galectin-7 expression and subcellular and extracellular distribution may be crucially involved in the pathogenic process of HS.

Clinical effects of non-ablative and ablative fractional lasers on various hair disorders: a case series of 17 patients.

BACKGROUND AND OBJECTIVES: Both ablative and non-ablative fractional lasers have been applied to various uncommon hair disorders. The purpose of this study was to demonstrate the clinical effects of fractional laser therapy on the course of primary follicular and perifollicular pathologies and subsequent hair regrowth. MATERIALS AND METHODS: A retrospective review of 17 patients with uncommon hair disorders - including ophiasis, autosomal recessive woolly hair/hypotrichosis, various secondary cicatricial alopecias, pubic hypotrichosis, frontal fibrosing alopecia, and perifolliculitis abscedens et suffodiens - was conducted. All patients had been treated with non-ablative and/or ablative fractional laser therapies. RESULTS: The mean clinical improvement score in these 17 patients was 2.2, while the mean patient satisfaction score was 2.5. Of the 17 subjects, 12 (70.6%) demonstrated a clinical response to non-ablative and/or ablative fractional laser treatments, including individuals with ophiasis, autosomal recessive woolly hair/hypotrichosis, secondary cicatricial alopecia (scleroderma and pressure-induced alopecia), frontal fibrosing alopecia, and perifolliculitis abscedens et suffodiens. Conversely, patients with long-standing ophiasis, surgical scar-induced secondary cicatricial alopecia, and pubic hypotrichosis did not respond to fractional laser therapy. CONCLUSION: Our findings demonstrate that the use of non-ablative and/or ablative fractional lasers promoted hair growth in certain cases of uncommon hair disorders without any remarkable side effects.

Combination of 595-nm pulsed dye laser, long-pulsed 755-nm alexandrite laser, and microdermabrasion treatment for keratosis pilaris: retrospective analysis of 26 Korean patients.

Keratosis pilaris (KP) has beenpresented as small keratotic follicular papules with or without surrounding erythema. Various treatments with laser or light therapy have been used for the management of KP with various clinical outcomes. In the present study, we investigated the efficacy and safety of a combination therapy for KP. A total of 29 anatomical sites with KP in 26 patients were treated using a 595-nm pulsed dye laser (PDL) with nonpurpuragenic fluences, a long-pulsed 755-nm alexandrite laser, and microdermabrasion. Clinical improvement was assessed by comparing preand posttreatment clinical photographs and patient satisfaction rates. Evaluation of the clinical results three months after the treatments showed that 12 of the 29 anatomical sites (41.4%) demonstrated Grade 3 clinical improvement, ten (34.5%) had Grade 2 clinical improvement, four (13.8%) showed Grade 1 improvement, and three (10.3%) showed Grade 4 improvement. We observed that KP lesions improved not only in erythema and skin texture, but also in brownish dyschromias. Potential adverse events were not observed, except prolonged posttherapy scaling. Our observations demonstrate that combination therapy using a 595-nm PDL, a long-pulsed 755-nm alexandrite laser, and microdermabrasion can have a positive therapeutic effect on KP.

Deeper mechanistic insights into epitaxial nickelate electrocatalysts for the oxygen evolution reaction.

Mass production of green hydrogen via water electrolysis requires advancements in the performance of electrocatalysts, especially for the oxygen evolution reaction. In this feature article, we highlight how epitaxial nickelates act as model systems to identify atomic-level composition-structure-property-activity relationships, capture dynamic changes under operating conditions, and reveal reaction and failure mechanisms. These insights guide advanced electrocatalyst design with tailored functionality and superior performance. We conclude with an outlook for future developments via operando characterization and multilayer electrocatalyst design.

Synthesis of Linear Black Gold Nanostructures Processable as Sunlight and Low-Energy Light Collecting Films for Photo-Thermoelectricity.

As one of the effort to cope with the energy crisis and carbon neutrality, utilization of low-grade energy generated indoors (e.g., light) is imperative because this saves building and house energy, which accounts for ≈40% of total energy consumption. Although photovoltaic devices could contribute to energy savings, it is also necessary to harvest heat from indoor lights to generate electricity because the light absorbed by materials is mostly transformed into heat. For daily life uses, materials should not only have high absorptance and low emittance but also be easily processed into various forms. To this end, this work synthesizes black aqueous suspensions containing winding and bent linear gold nanostructures with diameters of 3-5 nm and length-to-diameter ratios of ≈4-10. Their optical and photo-thermal characteristics are understood through experimental and theoretical investigations. Black gold nanostructures are conveniently processed into metal-dielectric films on metal, glass, and flexible substrates. The film on copper has an absorptance of 0.97 and an emittance of 0.08. Under simulated sunlight and indoor LED light illumination, the film has equivalent photo-thermal and photo-thermoelectric performances to a top-tier sunlight-collecting film. This work attempts to modify the film structure to generate more usable electricity from low-energy indoor light.

3D biofabrication of diseased human skin models in vitro.

Human skin is an organ located in the outermost part of the body; thus, it frequently exhibits visible signs of physiological health. Ethical concerns and genetic differences in conventional animal studies have increased the need for alternative in vitro platforms that mimic the structural and functional hallmarks of natural skin. Despite significant advances in in vitro skin modeling over the past few decades, different reproducible biofabrication strategies are required to reproduce the pathological features of diseased human skin compared to those used for healthy-skin models. To explain human skin modeling with pathological hallmarks, we first summarize the structural and functional characteristics of healthy human skin. We then provide an extensive overview of how to recreate diseased human skin models in vitro, including models for wounded, diabetic, skin-cancer, atopic, and other pathological skin types. We conclude with an outlook on diseased-skin modeling and its technical perspective for the further development of skin engineering.