Fabrication of a vertically-stacked passive-matrix micro-LED array structure for a dual color display.

We report a color tunable display consisting of two passive-matrix micro-LED array chips. The device has combined vertically stacked blue and green passive-matrix LED array chips sandwiched by a transparent bonding material. We demonstrate that vertically stacked blue and green micro-pixels are independently controllable with operation of four color modes. Moreover, the color of each pixel is tunable in the entire wavelength from the blue to green region (450 nm - 540 nm) by applying pulse-width-modulation bias voltage. This study is meaningful in that a dual color micro-LED array with a vertically stacked subpixel structure is realized.

Ag nanoparticles-embedded surface plasmonic InGaN-based solar cells via scattering and localized field enhancement.

Ag nanoparticles are embedded in intentionally etched micro-circle p-GaN holes by means of a thermal agglomeration process to enhance the light absorption efficiency in InGaN/GaN multi-quantum-well (MQW) solar cells. The Ag nanoparticles are theoretically and experimentally verified to generate the plasmon light scattering and the localized field enhancement near the MQW absorption layer. The external quantum efficiency enhancement at a target wavelength region is demonstrated by matching the plasmon resonance of Ag nanoparticles, resulting in a Jsc improvement of 9.1%. Furthermore, the Ag-nanoparticle-embedded InGaN solar cell is effectively fabricated considering the carrier extraction that more than 70% of F.F. and 2.2 V of high Voc are simultaneously attained.

Efficiency improvement in InGaN-based solar cells by indium tin oxide nano dots covered with ITO films.

InGaN based MQW solar cells have been fabricated with 4 different transparent top electrode structures: (1)- ITO 200 nm, (2)-ITO nano dots only, (3)-ITO nano dots on ITO 50 nm and (4)-ITO nano dots on ITO 100 nm. The solar cell with the ITO 50 nm on ITO nano dots under AM 1.5 conditions showed the best results: 2.3 V for V(oc), 0.69 mA/cm(2) for J(sc), 41.8% for peak EQE, and 0.91% for conversion efficiency. Efficiency improvement was possible due to the decreased reflectance achieved by the ITO nano dots covered with an ITO film with optimized thickness.

Efficiency improvement in InGaN-based solar cells by indium tin oxide nano dots covered with ITO films.

InGaN based MQW solar cells have been fabricated with 4 different transparent top electrode structures: (1)- ITO 200 nm, (2)-ITO nano dots only, (3)-ITO nano dots on ITO 50 nm and (4)-ITO nano dots on ITO 100 nm. The solar cell with the ITO 50 nm on ITO nano dots under AM 1.5 conditions showed the best results: 2.3 V for V(oc), 0.69 mA/cm(2) for J(sc), 41.8% for peak EQE, and 0.91% for conversion efficiency. Efficiency improvement was possible due to the decreased reflectance achieved by the ITO nano dots covered with an ITO film with optimized thickness.

Combined Effect of Carrier Localization and Polarity in InxGa1-xN/GaN Quantum Wells.

The influence of carrier localization and polarization-induced electric fields on the spectral variation of photoluminescence was comparatively studied in polar and semipolar InxGa1-x N/GaN strained quantum wells embedded in p-i-n diodes. Two representative structures with x = 0.16 for polar (0001) diodes and potential fluctuations for semipolar diodes grown along (1122) direction have been investigated with a reverse bias up to -4 V. From the s-shaped spectral shift as a function of temperature, the existence of single and triple localization traps was confirmed in polar and semipolar diodes. Within our bias range, we observed the monotonic blueshift with reverse bias in the polar sample, indicating that the carriers are laterally localized and thus influenced by the vertical piezoelectric fields. In clear contrast, the semipolar sample showed the blueshift of localized states only at low temperatures, while the deepest localization features were found at the highest available temperatures, overriding the influence of thermal activation and polarization fields.

Light-extraction enhancement of a GaN-based LED covered with ZnO nanorod arrays.

We investigate the mechanism of light extraction enhancement of a GaN-based light-emitting diode (LED) grown on patterned sapphire substrate (PSS), that has ZnO nanorod arrays (NRAs) fabricated on top of the device using the hydrothermal method. We found that the light output power of the LED with ZnO NRAs increases by approximately 30% compared to the conventional LED without damaging the electrical properties of the device. We argue that the gradual decrease of the effective refractive index, which is caused by the fabrication of ZnO NRAs, is the mechanism of the observed improvement. Our argument is confirmed by cross-sectional confocal scanning electroluminescence microscopy (CSEM) and the theoretical simulations, where we observed a distinct increase of the transmission at the interface between LED and air at the operation wavelength of the LED. In addition, the plane-view CSEM results indicate that ZnO NRAs, which were grown on the bare p-type GaN layer as an electrical safety margin area, also contribute to the enhanced light output power of the LED, which indicate further enhancement is manifested even in the optically ineffective sacrificial area.