RESUMO
Since the Fukushima Daiichi Nuclear Power Plant accident in March 2011, the technology available for unmanned aerial vehicles (UAVs) for radiation monitoring has improved greatly. Remote access to radiation-contaminated areas not only eliminates unnecessary exposure of civilians or military personnel, but also allows workers to explore inaccessible places. Hazardous levels of radioactive contamination can be expected as a result of accidents in the nuclear power industry or as a result of the intentional release of radioactive materials for terrorist purposes (dirty bombs, building contamination, etc.). The possibility to detect, identify, and characterize radiation and nuclear material using mobile and remote sensing platforms is a common requirement in the radiation sensing community. The technology has applications in homeland security and law enforcement, customs and border protection, nuclear power plant safety and security, nuclear waste monitoring, environmental recovery, and the military. In this work, the authors have developed, implemented, and characterized a gamma-ray detection and spectroscopy system capable of operating on a UAV. The system was mainly developed using open-source software and affordable hardware components to reduce development and maintenance costs and provide satisfactory performance as a detection instrument. The designed platform can be used to perform mapping or localization tasks to improve the risk assessment process for first responders during the management of radiological and nuclear incidents. First, the design process of the system is described; the result of the characterization of the platform is then presented together with the use of the prototype installed on a UAV in an exercise simulating a radiological and nuclear contamination scenario.
Assuntos
Monitoramento de Radiação , Terrorismo , Humanos , Centrais NuclearesRESUMO
High-energy x-rays produced by radiotherapy accelerators operating at potentials above 10 MV may activate the air via (γ, n) reactions with both oxygen and nitrogen. While the activation products are relatively short-lived, personnel entering the accelerator room may inhale some radioactive air, which warrants internal dosimetry assessments. This work illustrates a method based on the use of ammonium nitrate solutions for the evaluation of photon-induced air activation and for the estimate of internal doses to radiotherapy personnel. Air activation and internal dosimetry assessments based on our method are presented for some widespread radiotherapy linear accelerator models. Our results indicate that the equivalent dose to the lungs of radiotherapy personnel is negligible for beam energies below 18 MeV.
Assuntos
Pulmão/química , Exposição Ocupacional/análise , Aceleradores de Partículas/instrumentação , Exposição à Radiação/análise , Radioisótopos/análise , Radioterapia/instrumentação , Ar/análise , Carga Corporal (Radioterapia) , Desenho de Equipamento , Análise de Falha de Equipamento , Humanos , Doses de Radiação , Monitoramento de Radiação/instrumentação , Monitoramento de Radiação/métodos , Raios XRESUMO
The irradiation facility of the University of Pisa (UNIPI) is a neutron and gamma irradiation facility of the University of Pisa used for calibration purposes and to evaluate detectors and dosemeters for mixed neutron and gamma fields. The facility consists of a fairly large room (5.0 × 7.8 × 2.5 m3) with concrete walls and roof designed to minimise radiation scattering. Sealed neutron and gamma radionuclide sources are stored in the facility for calibration and test purposes. In order to perform accurate response measurements, this study applied a methodology of general validity to assess the neutron and gamma room scatter contributions (albedo) to the fluence and to the ambient dose equivalent rates. The assessment was done for the standard irradiation points of the facility, using detailed Monte Carlo simulations and considering several source-to-wall and source-to-detector distances.
Assuntos
Nêutrons , Radiometria , Calibragem , Método de Monte Carlo , Doses de RadiaçãoRESUMO
A commercial silicon PIN-photodiode was tested and characterized as ionizing radiation detector for radiological applications. A current-to-voltage amplification stage was designed and realized in order to acquire the photodiode signal in current mode. The system was tested with clinical beams routinely used for radiography and mammography. A Monte Carlo simulation of the detector was performed with the MCNPX code in order to model and fully understand, in particular, the impact of the sensor casing on the low energy response of the device. A reproducible output linearity was found over the dose range 0.03-4.5 mGy of great clinical relevance. The system sensitivity was found to be stable at 0.2 V s Gy(-1) for effective X-ray energies between 17 and 40 keV. The batch-to-batch reproducibility of the diodes was also experimentally investigated for two different batches of 14 diodes each. An inter-comparison with dosimeters routinely used in medical physics (i.e. Barracuda MPD RTI) showed a linear correlation between PIN-photodiode readout and absorbed dose measured with Barracuda, in the range of doses received by mammography and radiology patients.