RESUMO
Live-cell super-resolution microscopy enables the imaging of biological structure dynamics below the diffraction limit. Here we present enhanced super-resolution radial fluctuations (eSRRF), substantially improving image fidelity and resolution compared to the original SRRF method. eSRRF incorporates automated parameter optimization based on the data itself, giving insight into the trade-off between resolution and fidelity. We demonstrate eSRRF across a range of imaging modalities and biological systems. Notably, we extend eSRRF to three dimensions by combining it with multifocus microscopy. This realizes live-cell volumetric super-resolution imaging with an acquisition speed of ~1 volume per second. eSRRF provides an accessible super-resolution approach, maximizing information extraction across varied experimental conditions while minimizing artifacts. Its optimal parameter prediction strategy is generalizable, moving toward unbiased and optimized analyses in super-resolution microscopy.
Assuntos
Artefatos , Microscopia de Fluorescência/métodosRESUMO
For the fabrication of perovskite solar cells (PSCs) using a solution process, it is essential to understand the characteristics of the perovskite precursor solution to achieve high performance and reproducibility. The colloids (iodoplumbates) in the perovskite precursors under various conditions were investigated by UV-visible absorption, dynamic light scattering, photoluminescence, and total internal reflection fluorescence microscopy techniques. Their local structure was examined by in situ X-ray absorption fine structure studies. Perovskite thin films on a substrate with precursor solutions were characterized by transmission electron microscopy, X-ray diffraction analysis, space-charge-limited current, and Kelvin probe force microscopy. The colloidal properties of the perovskite precursor solutions were found to be directly correlated with the defect concentration and crystallinity of the perovskite film. This work provides guidelines for controlling perovskite films by varying the precursor solution, making it possible to use colloid-engineered lead halide perovskite layers to fabricate efficient PSCs.
RESUMO
Förster resonance energy transfer (FRET) and fluorescence lifetime imaging (FLIM) have been coupled with multiphoton microscopy to image in vivo dynamics. However, the increase in optical aberrations as a function of depth significantly reduces the fluorescent signal, spatial resolution, and fluorescence lifetime accuracy. We present the development of a time-resolved FRET-FLIM imaging system with adaptive optics. We demonstrate the improvement of our adaptive optics (AO)-FRET-FLIM instrument over standard multiphoton FRET-FLIM imaging. We validate our approach using fixed cellular samples with FRET standards and in vivo with live imaging in a mouse kidney.
Assuntos
Transferência Ressonante de Energia de Fluorescência/instrumentação , Microscopia de Fluorescência/instrumentação , Dispositivos Ópticos , Macrófagos/citologiaRESUMO
Imaging the spatiotemporal interaction of proteins in vivo is essential to understanding the complexities of biological systems. The highest accuracy monitoring of protein-protein interactions is achieved using Förster resonance energy transfer (FRET) measured by fluorescence lifetime imaging, with measurements taking minutes to acquire a single frame, limiting their use in dynamic live cell systems. We present a diffraction limited, massively parallel, time-resolved multifocal multiphoton microscope capable of producing fluorescence lifetime images with 55 ps time-resolution, giving improvements in acquisition speed of a factor of 64. We present demonstrations with FRET imaging in a model cell system and demonstrate in vivo FLIM using a GTPase biosensor in the zebrafish embryo.
Assuntos
Transferência Ressonante de Energia de Fluorescência , Microscopia de Fluorescência por Excitação Multifotônica/métodos , Animais , Células MCF-7 , Fatores de Tempo , Peixe-ZebraRESUMO
Understanding the structure of supramolecular complexes provides insight into their functional capabilities and how they can be modulated in the context of disease. Super-resolution microscopy (SRM) excels in performing this task by resolving ultrastructural details at the nanoscale with molecular specificity. However, technical limitations, such as underlabelling, preclude its ability to provide complete structures. Single-particle analysis (SPA) overcomes this limitation by combining information from multiple images of identical structures and producing an averaged model, effectively enhancing the resolution and coverage of image reconstructions. This review highlights important studies using SRM-SPA, demonstrating how it broadens our knowledge by elucidating features of key biological structures with unprecedented detail.
Assuntos
Microscopia de Fluorescência , Microscopia de Fluorescência/métodosRESUMO
Two-photon direct laser writing is an additive fabrication process that utilizes two-photon absorption of tightly focused femtosecond laser pulses to implement spatially controlled polymerization of a liquid-phase photoresist. Two-photon direct laser writing is capable of nanofabricating arbitrary three-dimensional structures with nanometer accuracy. Here, we explore direct laser writing for high-resolution optical microscopy by fabricating unique 3D optical fiducials for single-molecule tracking and 3D single-molecule localization microscopy. By having control over the position and three-dimensional architecture of the fiducials, we improve axial discrimination and demonstrate isotropic subnanometer 3D focusing (<0.8 nm) over tens of micrometers using a standard inverted microscope. We perform 3D single-molecule acquisitions over cellular volumes, unsupervised data acquisition and live-cell single-particle tracking with nanometer accuracy.
Assuntos
Imageamento Tridimensional/métodos , Lasers , Nanotecnologia/métodos , Imagem Óptica/métodos , Imagem Individual de Molécula/métodos , Animais , Antígeno CD47/análise , Antígeno CD47/química , Antígeno CD47/metabolismo , Células COS , Carbocianinas/análise , Carbocianinas/química , Carbocianinas/metabolismo , Chlorocebus aethiops , Células HEK293 , Humanos , Microscopia de Fluorescência/métodos , Microtúbulos/química , Microtúbulos/metabolismo , Nanoestruturas/química , Polimerização , Reprodutibilidade dos TestesRESUMO
The data quality of high-resolution imaging can be markedly improved with active stabilization, which is based on feedback loops within the microscope that maintain the sample in the same location throughout the experiment. The purpose is to provide a highly accurate focus lock, therefore eliminating drift and improving localization precision. Here, we describe a step-by-step protocol for building a total internal reflection microscope combined with the feedback loops necessary for sample and detection stabilization, which we routinely use in single-molecule localization microscopy (SMLM). The performance of the final microscope with feedback loops, called feedback SMLM, has previously been described. We demonstrate how to build a replica of our system and include a list of the necessary optical components, tips, and an alignment strategy.
RESUMO
Live cell imaging with high spatiotemporal resolution and high detection sensitivity facilitates the study of the dynamics of cellular structure and function. However, extracting high-resolution 4D (3D space plus time) information from live cells remains challenging, because current methods are slow, require high peak excitation intensities or suffer from high out-of-focus background. Here we present 3D interferometric lattice light-sheet (3D-iLLS) imaging, a technique that requires low excitation light levels and provides high background suppression and substantially improved volumetric resolution by combining 4Pi interferometry with selective plane illumination. We demonstrate that 3D-iLLS has an axial resolution and single-particle localization precision of 100 nm (FWHM) and <10 nm (1σ), respectively. We illustrate the performance of 3D-iLLS in a range of systems: single messenger RNA molecules, nanoscale assemblies of transcription regulators in the nucleus, the microtubule cytoskeleton and mitochondria organelles. The enhanced 4D resolution and increased signal-to-noise ratio of 3D-iLLS will facilitate the analysis of biological processes at the sub-cellular level.
Assuntos
Imageamento Tridimensional , Interferometria , Imageamento Tridimensional/métodos , Microscopia de Fluorescência/métodos , MitocôndriasRESUMO
A key part of any super-resolution technique involves accurately correcting for mechanical motion of the sample and setup during acquisition. If left uncorrected, drift degrades the resolution of the final reconstructed image and can introduce unwanted artifacts. Here, we describe how to implement active stabilization, thereby reducing drift to ~1 nm across all three dimensions. In this protocol, we show how to implement our method on custom and standard microscopy hardware. We detail the construction of a separate illumination and detection path, dedicated exclusively to acquiring the diffraction pattern of fiducials deposited on the imaging slide. We also show how to focus lock and adjust the focus in arbitrary nanometer step size increments. Our real-time focus locking is based on kHz calculations performed using the graphics processing unit. The fast calculations allow for rapid repositioning of the sample, which reduces drift below the photon-limited localization precision. Our approach allows for a single-molecule and/or super-resolution image acquisition free from movement artifacts and eliminates the need for complex algorithms or hardware installations. The method is also useful for long acquisitions which span over hours or days, such as multicolor super resolution. Installation does not require specialist knowledge and can be implemented in standard biological laboratories. The full protocol can be implemented within ~2 weeks.
Assuntos
Imageamento Tridimensional/instrumentação , Microscopia/instrumentação , Imagem Individual de Molécula/instrumentação , Algoritmos , Animais , Células COS , Chlorocebus aethiops , Desenho de Equipamento , Imageamento Tridimensional/métodos , Microscopia/métodos , Imagem Individual de Molécula/métodosRESUMO
Single molecule localisation microscopy (SMLM) is a powerful tool that has revealed the spatial arrangement of cell surface signalling proteins, producing data of enormous complexity. The complexity is partly driven by the convolution of technical and biological signal components, and partly by the challenge of pooling information across many distinct cells. To address these two particular challenges, we have devised a novel algorithm called K-neighbourhood analysis (KNA), which emphasises the fact that each image can also be viewed as a composition of local neighbourhoods. KNA is based on a novel transformation, spatial neighbourhood principal component analysis (SNPCA), which is defined by the PCA of the normalised K-nearest neighbour vectors of a spatially random point pattern. Here, we use KNA to define a novel visualisation of individual images, to compare within and between groups of images and to investigate the preferential patterns of phosphorylation. This methodology is also highly flexible and can be used to augment existing clustering methods by providing clustering diagnostics as well as revealing substructure within microclusters. In summary, we have presented a highly flexible analysis tool that presents new conceptual possibilities in the analysis of SMLM images.
RESUMO
Single-molecule localization microscopy (SMLM) has the potential to quantify the diversity in spatial arrangements of molecules in intact cells. However, this requires that the single-molecule emitters are localized with ultrahigh precision irrespective of the sample format and the length of the data acquisition. We advance SMLM to enable direct distance measurements between molecules in intact cells on the scale between 1 and 20 nm. Our actively stabilized microscope combines three-dimensional real-time drift corrections and achieves a stabilization of <1 nm and localization precision of ~1 nm. To demonstrate the biological applicability of the new microscope, we show a 4- to 7-nm difference in spatial separations between signaling T cell receptors and phosphatases (CD45) in active and resting T cells. In summary, by overcoming the major bottlenecks in SMLM imaging, it is possible to generate molecular images with nanometer accuracy and conduct distance measurements on the biological relevant length scales.
RESUMO
BACKGROUND: Obesity and emaciation in horses have major detrimental effects on health and morbidity, reproductive failure, work performance or carcass quality. Scoring is a current management tool used to assess and monitor equine body condition due to its simplicity and low cost. However, accurate assessment of obesity remains a challenge, even though a number of approaches have been tested, particularly for research purposes on adiposity. Their merit is usually validated by comparison with standard scoring methods. The overall aim of this study was to establish the correlation between post-mortem nape fat measurements obtained after photographic image analysis and cresty neck score (CNS) in horses. Data were collected from seventeen horses with a hot carcass weight of 165 ± 51 kg. Pre-slaughter CNS measurements were obtained using a six-point scale (from 0 to 5). Image capture was performed post-mortem, in the slaughter line; for each carcass, images of the dorsal and medial views were collected and afterwards transferred to a computer for analysis. After outlining the cresty neck fat, its area, major axis and thickness were determined. Correlation coefficients between nape fat measurements, CNS and carcass fatness were determined. RESULTS: The horses in the study show similar variation for CNS and hot carcass weight [Coefficient of variation (CV) = 32 and 31 %, respectively], but a high variation for carcass fattening (CV = 41 %). The nape fat area measurement was the parameter exhibiting the greatest variation (CV = 50 %). Correlations established between CNS and the variables tested revealed the existence of moderate to strong correlations among CNS, nape fat measurements, and carcass fatness. The highest correlation coefficients were found between CNS and nape fat thickness (r = 0.882; P < 0.01). The linear regression between CNS and nape fat thickness accounted for 77 % of the recorded variation for nape fat thickness. CONCLUSIONS: The present study showed that there is a strong correlation between horse CNS and post-mortem nape fat measurements or carcass fatness.
Assuntos
Tecido Adiposo/anatomia & histologia , Composição Corporal , Pesos e Medidas Corporais/veterinária , Cavalos/anatomia & histologia , Fotografação/veterinária , Animais , Pesos e Medidas Corporais/normas , Processamento de Imagem Assistida por Computador , Modelos LinearesRESUMO
We demonstrate diffraction limited multiphoton imaging in a massively parallel, fully addressable time-resolved multi-beam multiphoton microscope capable of producing fluorescence lifetime images with sub-50ps temporal resolution. This imaging platform offers a significant improvement in acquisition speed over single-beam laser scanning FLIM by a factor of 64 without compromising in either the temporal or spatial resolutions of the system. We demonstrate FLIM acquisition at 500 ms with live cells expressing green fluorescent protein. The applicability of the technique to imaging protein-protein interactions in live cells is exemplified by observation of time-dependent FRET between the epidermal growth factor receptor (EGFR) and the adapter protein Grb2 following stimulation with the receptor ligand. Furthermore, ligand-dependent association of HER2-HER3 receptor tyrosine kinases was observed on a similar timescale and involved the internalisation and accumulation or receptor heterodimers within endosomes. These data demonstrate the broad applicability of this novel FLIM technique to the spatio-temporal dynamics of protein-protein interaction.