Quantitative Dual-Energy CT Image Guidance for Thermochemical Ablation: In Vivo Results in the Rabbit VX2 Model.

PURPOSE: To evaluate the feasibility of using dual-energy computed tomography (CT) and theranostic cesium hydroxide (CsOH) for image guidance of thermochemical ablation (TCA) in a rabbit VX2 tumor model. MATERIALS AND METHODS: In vivo experiments were performed on New Zealand white rabbits, where VX2 tumor fragments (0.3 mL) were inoculated into the right and left flanks (n = 16 rabbits, 32 tumors). Catheters were placed in the approximate center of 1- to 2-cm diameter tumors under ultrasound guidance. TCA was delivered in 1 of 3 treatment groups: untreated control, 5-M TCA, or 10-M TCA. The TCA base reagent was doped with 250-mM CsOH. Dual-energy CT was performed before and after TCA. Cesium (CS)-specific images were postprocessed on the basis of previous phantom calibrations to determine Cs concentration. Line profiles were drawn through the ablation center. Twenty-four hours after TCA, subjects were euthanized, and the resulting damage was evaluated with histopathology. RESULTS: Cs was detected in 100% of treated tumors (n = 21). Line profiles indicated highest concentrations at the injection site and decreased concentrations at the tumor margins, with no Cs detected beyond the ablation zone. The maximum detected Cs concentration ranged from 14.39 to 137.33 mM. A dose-dependent trend in tissue necrosis was demonstrated between the 10-M TCA and 5-M TCA treatment groups (P = .0005) and untreated controls (P = .0089). CONCLUSIONS: Dual-energy CT provided image guidance for delivery, localization, and quantification of TCA in the rabbit VX2 model.

Application of Trifluoroacetic Acid as a Theranostic Agent for Chemical Ablation of Solid Tissue.

PURPOSE: To evaluate trifluoroacetic acid (TFA) as a theranostic chemical ablation agent and determine the efficacy of TFA for both noninvasive imaging and tissue destruction. MATERIALS AND METHODS: Fluorine-19 magnetic resonance imaging (19F-MRI) was optimized at 7 T using a custom-built volume coil. Fluorine images were acquired with both rapid acquisition with relaxation enhancement and balanced steady-state free precession (bSSFP) sequences with varying parameters to determine the optimal sequence for TFA. The theranostic efficacy of chemical ablation was examined by injecting TFA (100 µL; 0.25, 0.5, 1.0, and 2.0M) into ex vivo porcine liver. 19F and proton MRI were acquired and superimposed to visualize distribution of TFA in tissue and quantify sensitivity. Tissue damage was evaluated with gross examination, histology, and fluorescence microscopy. RESULTS: The optimal 19F-MRI sequence was found to be bSSFP with a repetition time of 2.5 ms and flip angle of 70°. The minimum imageable TFA concentration was determined to be 6.7 ± 0.5 mM per minute of scan time (0.63×0.63×5.00 mm voxel), and real-time imaging (temporal resolution of at least 1 s-1) was achieved with 2M TFA both in vitro and in ex vivo tissue. TFA successfully coagulated tissue, and damage was locally confined. In addition to hepatic cord disruption, cytoskeletal collapse and chromatin clumping were observed in severely damaged areas in tissues treated with 0.5M or higher TFA concentrations. CONCLUSIONS: TFA was determined to be a theranostic agent for chemical ablation of solid tissue. Ablation was both efficacious and imageable in ex vivo healthy tissue, even at low concentrations or with high temporal resolution.

Heating technology for malignant tumors: a review.

The therapeutic application of heat is very effective in cancer treatment. Both hyperthermia, i.e., heating to 39-45 °C to induce sensitization to radiotherapy and chemotherapy, and thermal ablation, where temperatures beyond 50 °C destroy tumor cells directly are frequently applied in the clinic. Achievement of an effective treatment requires high quality heating equipment, precise thermal dosimetry, and adequate quality assurance. Several types of devices, antennas and heating or power delivery systems have been proposed and developed in recent decades. These vary considerably in technique, heating depth, ability to focus, and in the size of the heating focus. Clinically used heating techniques involve electromagnetic and ultrasonic heating, hyperthermic perfusion and conductive heating. Depending on clinical objectives and available technology, thermal therapies can be subdivided into three broad categories: local, locoregional, or whole body heating. Clinically used local heating techniques include interstitial hyperthermia and ablation, high intensity focused ultrasound (HIFU), scanned focused ultrasound (SFUS), electroporation, nanoparticle heating, intraluminal heating and superficial heating. Locoregional heating techniques include phased array systems, capacitive systems and isolated perfusion. Whole body techniques focus on prevention of heat loss supplemented with energy deposition in the body, e.g., by infrared radiation. This review presents an overview of clinical hyperthermia and ablation devices used for local, locoregional, and whole body therapy. Proven and experimental clinical applications of thermal ablation and hyperthermia are listed. Methods for temperature measurement and the role of treatment planning to control treatments are discussed briefly, as well as future perspectives for heating technology for the treatment of tumors.

Dual-Energy CT: Lower Limits of Iodine Detection and Quantification.

Background Assessments of the quantitative limitations among the six commercially available dual-energy (DE) CT acquisition schemes used by major CT manufacturers could aid researchers looking to use iodine quantification as an imaging biomarker. Purpose To determine the limits of detection and quantification of DE CT in phantoms by comparing rapid peak kilovoltage switching, dual-source, split-filter, and dual-layer detector systems in six different scanners. Materials and Methods Seven 50-mL iohexol solutions were used, with concentrations of 0.03-2.0 mg iodine per milliliter. The solutions and water sample were scanned five times each in two phantoms (small, 20-cm diameter; large, 30 × 40-cm diameter) with six DE CT systems and a total of 10 peak kilovoltage settings or combinations. Iodine maps were created, and the mean iodine signal in each sample was recorded. The limit of blank (LOB) was defined as the upper limit of the 95% confidence interval of the water sample. The limit of detection (LOD) was defined as the concentration with a 95% chance of having a signal above the LOB. The limit of quantification (LOQ) was defined as the lowest concentration where the coefficient of variation was less than 20%. Results The LOD range was 0.021-0.26 mg/mL in the small phantom and 0.026-0.55 mg/mL in the large phantom. The LOQ range was 0.07-0.50 mg/mL in the small phantom and 0.20-1.0 mg/mL in the large phantom. The dual-source and rapid peak kilovoltage switching systems had the lowest LODs, and the dual-layer detector systems had the highest LODs. Conclusion The iodine limit of detection using dual-energy CT systems varied with scanner and phantom size, but all systems depicted iodine in the small and large phantoms at or below 0.3 and 0.5 mg/mL, respectively, and enabled quantification at concentrations of 0.5 and 1.0 mg/mL, respectively. © RSNA, 2019 Online supplemental material is available for this article. See also the editorial by Hindman in this issue.

On the Need for a Taxonomy for Interventional Radiology: Initiating Dialogue for the Future.

OBJECTIVE: Interventional radiology (IR) needs comprehensive structure. The reactive structure of the past is strategically unwise for long-term growth of IR. CONCLUSION: IR needs a structured approach to move forward most effectively. A preliminary taxonomic scaffold is put forth and critically analyzed to illustrate new areas of research for the field, to identify new opportunities for growth, and to serve as a starting point for future discussion.

A molecular dynamics approach towards evaluating osmotic and thermal stress in the extracellular environment.

OBJECTIVE: A molecular dynamics approach to understanding fundamental mechanisms of combined thermal and osmotic stress induced by thermochemical ablation (TCA) is presented. METHODS: Structural models of fibronectin and fibronectin bound to its integrin receptor provide idealized models for the effects of thermal and osmotic stress in the extracellular matrix. Fibronectin binding to integrin is known to facilitate cell survival. The extracellular environment produced by TCA at the lesion boundary was modelled at 37 °C and 43 °C with added sodium chloride (NaCl) concentrations (0, 40, 80, 160, and 320 mM). Atomistic simulations of solvated proteins were performed using the GROMOS96 force field and TIP3P water model. Computational results were compared with the results of viability studies of human hepatocellular carcinoma (HCC) cell lines HepG2 and Hep3B under matching thermal and osmotic experimental conditions. RESULTS: Cell viability was inversely correlated with hyperthermal and hyperosmotic stresses. Added NaCl concentrations were correlated with a root mean square fluctuation increase of the fibronectin arginylglycylaspartic acid (RGD) binding domain. Computed interaction coefficients demonstrate preferential hydration of the protein model and are correlated with salt-induced strengthening of hydrophobic interactions. Under the combined hyperthermal and hyperosmotic stress conditions (43 °C and 320 mM added NaCl), the free energy change required for fibronectin binding to integrin was less favorable than that for binding under control conditions (37 °C and 0 mM added NaCl). CONCLUSION: Results quantify multiple measures of structural changes as a function of temperature increase and addition of NaCl to the solution. Correlations between cell viability and stability measures suggest that protein aggregates, non-functional proteins, and less favorable cell attachment conditions have a role in TCA-induced cell stress.

Cost effectiveness of radioembolization compared with conventional transarterial chemoembolization for treatment of hepatocellular carcinoma.

PURPOSE: To assess cost effectiveness of radioembolization versus conventional transarterial chemoembolization. MATERIALS AND METHODS: The cost of radioembolization versus conventional transarterial chemoembolization was determined based on Medicare reimbursements. Three patient subgroups were defined based on the Barcelona Clinic Liver Cancer (BCLC) classification system (A, B, or C). Efficacy and safety outcomes after each procedure were obtained from the literature. A Monte Carlo case-based simulation was designed for 60 months in 250 patients in each subgroup. Survival was calculated based on average survival from the literature and the Monte Carlo model. The primary outcome was the cost effectiveness of radioembolization over transarterial chemoembolization by considering calculated survival. RESULTS: The costs approached $17,000 for transarterial chemoembolization versus $31,000 or $48,000 for unilobar or bilobar radioembolization, respectively. Based on the simulation, median estimated survival was greater with transarterial chemoembolization than radioembolization in BCLC-A and BCLC-B subgroups (40 months vs 30 months and 23 months vs 16 months, respectively, P = .001). However, in the BCLC-C subgroup, survival was greater with radioembolization than transarterial chemoembolization (13 months vs 17 months, P = .001). The incremental cost-effectiveness ratio of radioembolization over transarterial chemoembolization in the BCLC-C subgroup was $360 per month. The results were dependent on bilobar versus unilobar radioembolization and the total number of radioembolization procedures. CONCLUSIONS: The model suggests radioembolization costs may be justified for patients with BCLC-C disease, whereas radioembolization may not be cost effective in patients with BCLC-A disease; however, many patients with BCLC-C disease have extensive disease precluding locoregional therapies. Secondary considerations may determine treatment choice in more borderline patients (BCLC-B disease) because there is no persistent survival benefit with radioembolization.

Dual mode single agent thermochemical ablation by simultaneous release of heat energy and acid: hydrolysis of electrophiles.

PURPOSE: This study aimed to investigate two readily available electrophilic reagents, acetyl chloride (AcCl), and acetic anhydride (Ac(2)O), for their potential in tissue ablation. MATERIALS AND METHODS: Reagents were diluted in diglyme as solutions up to 8 mol/L and tested in a gel phantom with NaOH solutions and ex vivo in porcine liver. Temperature, pH, and volume measurements were obtained. Infrared and gross pathological images were obtained in bisected specimens immediately after injection. RESULTS: AcCl was much more reactive than Ac(2)O and AcCl was therefore used in the tissue studies. Temperature increases of up to 37°C were noted in vitro and 30°C in ex vivo tissues using 4 mol/L AcCl solutions. Experiments at 8 mol/L were abandoned due to the extreme reactivity at this higher concentration. A change in pH of up to 4 log units was noted with 4 mol/L solutions of AcCl with slight recovery over time. Ablated volumes were consistently higher than injected volumes. CONCLUSIONS: Reaction of electrophiles in tissues shows promise as a new thermochemical ablation technique by means of only a single reagent. Further studies in this area are warranted.