RESUMO
Autonomous underwater vehicles (AUVs) may deviate from their predetermined trajectory in underwater currents due to the complex effects of hydrodynamics on their maneuverability. Model-based control methods are commonly employed to address this problem, but they suffer from issues related to the time-variability of parameters and the inaccuracy of mathematical models. To improve these, a meta-learning and self-adaptation hybrid approach is proposed in this paper to enable an underwater robot to adapt to ocean currents. Instead of using a traditional complex mathematical model, a deep neural network (DNN) serving as the basis function is trained to learn a high-order hydrodynamic model offline; then, a set of linear coefficients is adjusted dynamically by an adaptive law online. By conjoining these two strategies for real-time thrust compensation, the proposed method leverages the potent representational capacity of DNN along with the rapid response of adaptive control. This combination achieves a significant enhancement in tracking performance compared to alternative controllers, as observed in simulations. These findings substantiate that the AUV can adeptly adapt to new speeds of ocean currents.
RESUMO
Underwater acoustic and optical data fusion has been developed in recent decades. Matching of underwater acoustic and optical images is a fundamental and critical problem in underwater exploration because it usually acts as the key step in many applications, such as target detection, ocean observation, and joint positioning. In this study, a method of matching the same underwater object in acoustic and optical images was designed, consisting of two steps. First, an enhancement step is used to enhance the images and ensure the accuracy of the matching results based on iterative processing and estimate similarity. The acoustic and optical images are first pre-processed with the aim of eliminating the influence of contrast degradation, contour blur, and image noise. A method for image enhancement was designed based on iterative processing. In addition, a new similarity estimation method for acoustic and optical images is also proposed to provide the enhancement effect. Second, a matching step is used to accurately find the corresponding object in the acoustic images that appears in the underwater optical images. In the matching process, a correlation filter is applied to determine the correlation for matching between images. Due to the differences of angle and imaging principle between underwater optical and acoustic images, there may be major differences of size between two images of the same object. In order to eliminate the effect of these differences, we introduce the Gaussian scale-space, which is fused with multi-scale detection to determine the matching results. Therefore, the algorithm is insensitive to scale differences. Extensive experiments demonstrate the effectiveness and accuracy of our proposed method in matching acoustic and optical images.
RESUMO
Deployment of surface-level gateways holds potential as an effective method to alleviate high-propagation delays and high-error probability in an underwater wireless sensor network (UWSN). This promise comes from reducing distances to underwater nodes and using radio waves to forward information to a control station. In an UWSN, a dynamic energy efficient surface-level gateway deployment is required to cope with the mobility of underwater nodes while considering the remote and three-dimensional nature of marine space. In general, deployment problems are usually modeled as an optimization problem to satisfy multiple constraints given a set of parameters. One previously published static deployment optimization framework makes assumptions about network workload, routing, medium access control performance, and node mobility. However, in real underwater environments, all these parameters are dynamic. Therefore, the accuracy of performance estimates calculated through static UWSN deployment optimization framework tends to be limited by nature. This paper presents the Prediction-Assisted Dynamic Surface Gateway Placement (PADP) algorithm to maximize the coverage and minimize the average end-to-end delay of a mobile underwater sensor network over a specified period. PADP implements the Interacting Multiple Model (IMM) tracking scheme to predict the positions of sensor nodes. The deployment is determined based on both current and predicted positions of sensor nodes, which enables better coverage and shorter end-to-end delay. PADP uses a branch-and-cut approach to solve the optimization problem efficiently, and employs a disjoint-set data structure to ensure connectivity. Simulation results illustrate that PADP significantly outperforms a static gateway deployment scheme.
RESUMO
In this paper, we target solving the data gathering problem in underwater wireless sensor networks. In many underwater applications, it is not quick to retrieve sensed data, which gives us the opportunity to leverage mobile autonomous underwater vehicles (AUV) as data mules to periodically collect it. For each round of data gathering, the AUV visits part of the sensors, and the communication between AUV and sensor nodes is a novel high-speed magnetic-induction communication system. The rest of the sensors acoustically transmit their sensed data to the AUV-visit sensors. This paper deploys the HAS 4 (Heuristic Adaptive Sink Sensor Set Selection) algorithm to select the AUV-visited sensors for the purpose of energy saving, AUV cost reduction and network lifetime prolonging. By comparing HAS 4 with two benchmark selection methods, experiment results demonstrate that our algorithm can achieve a better performance.
RESUMO
A reliable energy-efficient routing protocol plays a key role in underwater data transmission. In the face of acoustic communication challenges in underwater wireless sensor networks (UWSNs), including long propagation delay, topology change, limited energy, and communication voids, we propose RECRP, a Reliable Energy-efficient Cross-layer Routing Protocol to achieve high data delivery rate. RECRP is a location-free single-copy protocol. The information of the physical layer such as Doppler scale shift measurement, Received Signal Strength Indication (RSSI), etc. are adopted to estimate the distance, thus no extra hardware is needed for localization. Moreover, the overhead introduced by redundant packets is avoided with the single-copy mechanism. To improve the two-hop packet delivery rate and balance energy consumption among adjacent nodes, an optimal maxâ»min method is proposed that dynamically controls transmission power and channel frequency. Furthermore, a surface to bottom routing establishment method is also adopted to handle communication voids. Compared with depth-based routing (DBR) and hop-by-hop vector-based forwarding (HH-VBF) , RECRP is more energy-efficient with a higher delivery rate.
RESUMO
Due to the characteristics of underwater acoustic channel, media access control (MAC) protocols designed for underwater acoustic sensor networks (UWASNs) are quite different from those for terrestrial wireless sensor networks. Moreover, in a sink-oriented network with event information generation in a sensor field and message forwarding to the sink hop-by-hop, the sensors near the sink have to transmit more packets than those far from the sink, and then a funneling effect occurs, which leads to packet congestion, collisions and losses, especially in UWASNs with long propagation delays. An improved CDMA-based MAC protocol, named path-oriented code assignment (POCA) CDMA MAC (POCA-CDMA-MAC), is proposed for UWASNs in this paper. In the proposed MAC protocol, both the round-robin method and CDMA technology are adopted to make the sink receive packets from multiple paths simultaneously. Since the number of paths for information gathering is much less than that of nodes, the length of the spreading code used in the POCA-CDMA-MAC protocol is shorter greatly than that used in the CDMA-based protocols with transmitter-oriented code assignment (TOCA) or receiver-oriented code assignment (ROCA). Simulation results show that the proposed POCA-CDMA-MAC protocol achieves a higher network throughput and a lower end-to-end delay compared to other CDMA-based MAC protocols.
RESUMO
A practical gas sensing system utilizing absorption spectrum scanning techniques was developed. Using the narrow-band transmission of a fiber tunable filter (TOF) and wavelength modulation technique, the so-called cross-sensing effects of the traditional spectrum absorption based gas sensor were reduced effectively and thus the target gas was detected sensitively and selectively. In order to reduce the effects of nonlinearity of TOF on the measurement results and improve the system stability in operation, the reflection spectrum of a reference FBG was monitored and employed to control the modulation region and center of TOF wavelength precisely. Moreover, a kind of weak signal detecting circuits was developed to detect the weak response signal of the system with high sensitivity. The properties of the proposed system were demonstrated experimentally by detection of acetylene. Approximate linear relationships between the system responses and the input acetylene concentrations were demonstrated by experiments. The minimum detectable acetylene of 5 x 10(-6), with signal-noise ratio of 3, was also achieved by experiments.