RESUMO
Microplastic (MP) pollution likely affects global soil carbon (C) dynamics, yet it remains uncertain how and to what extent MP influences soil respiration. Here, we report on a global meta-analysis to determine the effects of MP pollution on the soil microbiome and CO2 emission. We found that MP pollution significantly increased the contents of soil organic C (SOC) (21%) and dissolved organic C (DOC) (12%), the activity of fluorescein diacetate hydrolase (FDAse) (10%), and microbial biomass (17%), but led to a decrease in microbial diversity (3%). In particular, increases in soil C components and microbial biomass further promote CO2 emission (25%) from soil, but with a much higher effect of MPs on these emissions than on soil C components and microbial biomass. The effect could be attributed to the opposite effects of MPs on microbial biomass vs. diversity, as soil MP accumulation recruited some functionally important bacteria and provided additional C substrates for specific heterotrophic microorganisms, while inhibiting the growth of autotrophic taxa (e.g., Chloroflexi, Cyanobacteria). This study reveals that MP pollution can increase soil CO2 emission by causing shifts in the soil microbiome. These results underscore the potential importance of plastic pollution for terrestrial C fluxes, and thus climate feedbacks.
Assuntos
Microplásticos , Microbiologia do Solo , Microplásticos/análise , Solo/química , Dióxido de Carbono/análise , Dióxido de Carbono/metabolismo , Poluentes do Solo/análise , Microbiota/efeitos dos fármacos , Biomassa , Carbono/análise , Carbono/metabolismoRESUMO
The food crisis has increased demand for agricultural resources due to various factors such as extreme weather, energy crises, and conflicts. A solar greenhouse enables counter-seasonal winter cultivation due to its thermal insulation, thus alleviating the food crisis. The root temperature is of critical importance, although the mechanism of soil thermal environment change remains uncertain. This paper presents a comprehensive study of the soil thermal environment of a solar greenhouse in Jinzhong City, Shanxi Province, employing a variety of analytical techniques, including theoretical, experimental, and numerical simulation, and deep learning modelling. The results of this study demonstrate the following: During the overwintering period, the thermal environment of the solar greenhouse floor was divided into a low-temperature zone, a constant-temperature zone, and a high-temperature zone; the distance between the low-temperature boundary and the southern foot was 2.6 m. The lowest temperature in the low-temperature zone was 11.06 °C and the highest was 19.05 °C. The floor in the low-temperature zone had to be heated; the lowest value of the constant-temperature zone was 18.29 °C, without heating. The minimum distance between the area of high temperature and the southern foot of the solar greenhouse was 8 m and the lowest temperature reading was 19.29 °C. The indoor soil temperature tended to stabilise at a depth of 45 cm, and the lowest temperature reading at a horizontal distance of 1400 mm from the south foot was 19.5 °C. The Fluent and LSTM models fitted well and the models can be used to help control soil temperature during overwintering in extreme climates. The research can provide theoretical and data support for the crop areas and the heating of pipelines in the solar greenhouse.
RESUMO
Although soil ecological stoichiometry is constrained in natural ecosystems, its responses to anthropogenic perturbations are largely unknown. Inputs of inorganic fertilizer and crop residue are key cropland anthropogenic managements, with potential to alter their soil ecological stoichiometry. We conducted a global synthesis of 682 data pairs to quantify the responses of soil carbon (C), nitrogen (N), and phosphorus (P) and grain yields to combined inputs of crop residue plus inorganic fertilizer compared with only inorganic fertilizer application. Crop residue inputs enhance soil C (10.5%-12%), N (7.63%-9.2%), and P (2.62%-5.13%) contents, with an increase in C:N (2.51%-3.42%) and C:P (7.27%-8.00%) ratios, and grain yields (6.12%-8.64%), indicating that crop residue alleviated soil C limitation caused by inorganic fertilizer inputs alone and was able to sustain balanced stoichiometry. Moreover, the increase in soil C and C:N(P) ratio reached saturation in ~13-16 years after crop residue return, while grain yield increase trend discontinued. Furthermore, we identified that the increased C, N, and P contents and C:N(P) ratios were regulated by the initial pH and C content, and the increase in grain yield was not only related to soil properties, but also negatively related to the amount of inorganic N fertilizer input to a greater extent. Given that crop residual improvement varies with soil properties and N input levels, we propose a predictive model to preliminary evaluate the potential for crop residual improvement. Particularly, we suggest that part of the global budget should be used to subsidize crop residue input management strategies, achieving to a win-win situation for agricultural production, ecological protection, and climate change mitigation.
Assuntos
Fertilizantes , Solo , Solo/química , Ecossistema , Agricultura , Nitrogênio/análise , CarbonoRESUMO
As the millet ears are dense, small in size, and serious occlusion in the complex grain field scene, the target detection model suitable for this environment requires high computing power, and it is difficult to deploy the real-time detection of millet ears on mobile devices. A lightweight real-time detection method for millet ears is based on YOLOv5. First, the YOLOv5s model is improved by replacing the YOLOv5s backbone feature extraction network with the MobilenetV3 lightweight model to reduce model size. Then, using the multi-feature fusion detection structure, the micro-scale detection layer is augmented to reduce high-level feature maps and low-level feature maps. The Merge-NMS technique is used in post-processing for target information loss to reduce the influence of boundary blur on the detection effect and increase the detection accuracy of small and obstructed targets. Finally, the models reconstructed by different improved methods are trained and tested on the self-built millet ear data set. The AP value of the improved model in this study reaches 97.78%, F1-score is 94.20%, and the model size is only 7.56 MB, which is 53.28% of the standard YoloV5s model size, and has a better detection speed. Compared with other classical target detection models, it shows strong robustness and generalization ability. The lightweight model performs better in the detection of pictures and videos in the Jetson Nano. The results show that the improved lightweight YOLOv5 millet detection model in this study can overcome the influence of complex environments, and significantly improve the detection effect of millet under dense distribution and occlusion conditions. The millet detection model is deployed on the Jetson Nano, and the millet detection system is implemented based on the PyQt5 framework. The detection accuracy and detection speed of the millet detection system can meet the actual needs of intelligent agricultural machinery equipment and has a good application prospect.
Assuntos
Agricultura , Milhetes , Computadores de Mão , Grão Comestível , InteligênciaRESUMO
To date, research on abalone adhesion has primarily analyzed the organism's adhesion to smooth surfaces, with few studies on adhesion to non-smooth surfaces. The present study examined the surface morphology of the abalone's abdominal foot, followed by measuring the adhesive force of the abalone on a smooth force measuring plate and five force measuring plates with different surface morphologies. Next, the adhesion mechanism of the abdominal foot was analyzed. The findings indicated that the abdominal foot of the abalone features numerous stripe-shaped folds on its surface. The adhesion of the abalone to a fine frosted glass plate, a coarse frosted glass plate, and a quadrangular conical glass plate was not significantly different from that on a smooth glass plate. However, the organism's adhesion to a small lattice pit glass plate and block pattern glass plate was significantly different. The abalone could effectively adhere to the surface of the block pattern glass plate using the elasticity of its abdominal foot during adhesion but experienced difficulty in completely adhering to the surface of the quadrangular conical glass plate. The abdominal foot used its elasticity to form an independent sucker system with each small lattice pit, significantly improving adhesion to the small lattice pit glass plate. The elasticity of the abalone's abdominal foot created difficulty in handling slight morphological size changes in roughness, resulting in no significant differences in its adhesion to the smooth glass plate.
RESUMO
Plant growth-promoting bacteria (PGPB) offer a promising solution for mitigating heavy metals (HMs) stress in crops, yet the mechanisms underlying the way they operate in the soil-plant system are not fully understood. We therefore conducted a meta-analysis with 2037 observations to quantitatively evaluate the effects and determinants of PGPB inoculation on crop growth and HMs accumulation in contaminated soils. We found that inoculation increased shoot and root biomass of all five crops (rice, maize, wheat, soybean, and sorghum) and decreased metal accumulation in rice and wheat shoots together with wheat roots. Key factors driving inoculation efficiency included soil organic matter (SOM) and the addition of exogenous fertilizers (N, P, and K). The phylum Proteobacteria was identified as the keystone taxa in effectively alleviating HMs stress in crops. More antioxidant enzyme activity, photosynthetic pigment, and nutrient absorption were induced by it. Overall, using PGPB inoculation improved the growth performance of all five crops, significantly increasing crop biomass in shoots, roots, and grains by 33 %, 35 %, and 20 %, respectively, while concurrently significantly decreasing heavy metal accumulation by 16 %, 9 %, and 37 %, respectively. These results are vital to grasping the benefits of PGPB and its future application in enhancing crop resistance to HMs.
Assuntos
Produtos Agrícolas , Metais Pesados , Microbiologia do Solo , Poluentes do Solo , Bactérias/metabolismo , Bactérias/crescimento & desenvolvimento , Biomassa , Produtos Agrícolas/crescimento & desenvolvimento , Produtos Agrícolas/metabolismo , Produtos Agrícolas/microbiologia , Metais Pesados/metabolismo , Raízes de Plantas/crescimento & desenvolvimento , Raízes de Plantas/metabolismo , Raízes de Plantas/microbiologia , Solo/química , Poluentes do Solo/metabolismoRESUMO
Plant growth-promoting rhizobacteria (PGPR) play important roles in plant growth and defense under heavy metal (HM) stress. The direct integration of microbial and plant signals is key to the regulation of plant growth and HM stress defense, but the underlying mechanisms are still limited. Herein, we reveal a novel mechanism by which PGPR regulates plant growth-regulating substances in plant tissues and coordinates plant growth and defense in pak choi under cadmium (Cd) stress. This might be an efficient strategy and an extension of the mechanism by which plant-microbe interactions improve plant stress resistance. Azospirillum brasilense and heme synergistically reduced the shoot Cd content and promoted the growth of pak choi. The interaction between abscisic acid of microbial origin and heme improved Cd stress tolerance through enhancing Cd accumulation in the root cell wall. The interaction between A. brasilense and heme induced the growth-defense shift in plants under Cd stress. Plants sacrifice growth to enhance Cd stress defense, which then transforms into a dual promotion of both growth and defense. This study deepens our understanding of plant-microbe interactions and provides a novel strategy to improve plant growth and defense under HM stress, ensuring future food production and security.
Assuntos
Azospirillum brasilense , Cádmio , Heme , Poluentes do Solo , Azospirillum brasilense/fisiologia , Cádmio/toxicidade , Heme/metabolismo , Poluentes do Solo/toxicidade , Desenvolvimento Vegetal/efeitos dos fármacos , Raízes de Plantas/microbiologia , Raízes de Plantas/crescimento & desenvolvimento , Estresse FisiológicoRESUMO
Microbial inoculation is an important strategy to reduce the supply of heavy metals (HMs) in soil-crop systems. However, the mechanisms of microbial inoculation for the availability of HMs in soil and their accumulation/transfer in crops remain unclear. Here, the inhibitory effect of inoculation with Bacillus thuringiensis on the migration and accumulation of Pb/Cd in the soil-wheat system during the whole growth period was investigated by pot experiments. The results showed that inoculation with Bacillus thuringiensis increased soil pH and available nutrients (including carbon, nitrogen, and phosphorus), and enhanced the activities of nutrient-acquiring enzymes. Dominance analysis showed that dissolved organic matter (DOM) is the key factor affecting the availability of HMs. The content of colored spectral clusters and humification characteristics of DOM were significantly improved by inoculation, which is conducive to reducing the availability of Pb/Cd, especially during the flowering stage, the decrease was 12.8 %. Inoculation decreased Pb/Cd accumulation in the shoot and the transfer from root to shoot, with the greatest decreases at the jointing and seedling stages (27.0-34.1 % and 6.9-11.8 %), respectively. At the maturity stage, inoculation reduced the Pb/Cd accumulation in grain (12.9-14.7 %) and human health risk (4.1-13.2 %). The results of Pearson correlation analysis showed that the availability of Pb/Cd was positively correlated with the humification of DOM. Least square path model analysis showed that Bacillus thuringiensis could significantly reduce Pb/Cd accumulation in the grain and human health risks by regulating DOM spectral characteristics, the availability of HMs in soil and metals accumulation/transport in wheat at different growth stages. This study revealed the inhibition mechanism of Bacillus thuringiensis on migration of Pb/Cd in a soil-wheat system from a viewpoint of a full life cycle, which offers a valuable reference for the in-situ remediation of HM-contaminated soil and the safe production of food crops in field.
Assuntos
Bacillus thuringiensis , Cádmio , Chumbo , Poluentes do Solo , Solo , Triticum , Bacillus thuringiensis/fisiologia , Triticum/metabolismo , Triticum/crescimento & desenvolvimento , Poluentes do Solo/metabolismo , Cádmio/metabolismo , Chumbo/metabolismo , Solo/química , Microbiologia do SoloRESUMO
Soil contamination by microplastics (MPs) has emerged as a significant global concern. Although traditionally associated with crop production, contemporary understanding of soil health has expanded to include a broader range of factors, including animal safety, microbial diversity, ecological functions, and human health protection. This paradigm shifts underscores the imperative need for a comprehensive assessment of the effects of MPs on soil health. Through an investigation of various soil health indicators, this review endeavors to fill existing knowledge gaps, drawing insights from recent studies conducted between 2021 and 2024, to elucidate how MPs may disrupt soil ecosystems and compromise their crucial functions. This review provides a thorough analysis of the processes leading to MP contamination in soil environments and highlights film residues as major contributors to agricultural soils. MPs entering the soil detrimentally affect crop productivity by hindering growth and other physiological processes. Moreover, MPs hinder the survival, growth, and reproductive rates of the soil fauna, posing potential health risks. Additionally, a systematic evaluation of the impact of MPs on soil microbes and nutrient cycling highlights the diverse repercussions of MP contamination. Moreover, within soil-plant systems, MPs interact with other pollutants, resulting in combined pollution. For example, MPs contain oxygen-containing functional groups on their surfaces that form high-affinity hydrogen bonds with other pollutants, leading to prolonged persistence in the soil environment thereby increasing the risk to soil health. In conclusion, we succinctly summarize the current research challenges related to the mediating effects of MPs on soil health and suggest promising directions for future studies. Addressing these challenges and adopting interdisciplinary approaches will advance our understanding of the intricate interplay between MPs and soil ecosystems, thereby providing evidence-based strategies for mitigating their adverse effects.
RESUMO
Microplastics (MPs) and heavy metals (HMs) in soil contamination are considered an emerging global problem that poses environmental and health risks. However, their interaction and potential biological effects remain unclear. Here, we reviewed the interaction of MPs with HMs in soil, including its mechanisms, influencing factors and biological effects. Specifically, the interactions between HMs and MPs mainly involve sorption and desorption. The type, aging, concentration, size of MPs, and the physicochemical properties of HMs and soil have significant impacts on the interaction. In particular, MP aging affects specific surface areas and functional groups. Due to the small size and resistance to decomposition characteristics of MPs, they are easily transported through the food chain and exhibit combined biological effects with HMs on soil organisms, thus accumulating in the human body. To comprehensively understand the effect of MPs and HMs in soil, we propose combining traditional experiments with emerging technologies and encouraging more coordinated efforts.
Assuntos
Metais Pesados , Microplásticos , Humanos , Plásticos , Envelhecimento , Transporte Biológico , SoloRESUMO
The co-occurrence of microplastics (MPs) and heavy metal(loid)s (HMs) has attracted growing scientific interest because of their wide distribution and environmental toxicity. Nevertheless, the interactions between MPs and HMs in soil-plant systems remain unclear. We conducted a meta-analysis with 3226 observations from 87 independent studies to quantify the impact of MPs addition on the plant biomass and HMS accumulation. Co-occurrence of MPs and HMs (except for As) induced synergistic toxicity to plant growth. MPs promoted their uptake in the shoot by 11.0% for Cd, 30.0% for Pb, and 47.1% for Cu, respectively. In contrast, MPs caused a significant decrease (22.6%, 17.9-26.9%) in the shoot As accumulation. The type and dose of MPs were correlated with the accumulation of HMs. MPs increased available concentrations of Cd, Pb, and Cu, but decreased available As concentration in soils. Meanwhile, MPs addition significantly lowered soil pH. These findings may provide explanations for MPs-mediated effects on influencing the accumulation of HMs in plants. Using a machine learning approach, we revealed that soil pH and total HMs concentration are the major contributors affecting their accumulation in shoot. Overall, our study indicated that MPs may increase the environmental risks of HMs in agroecosystems, especially metal cations.
Assuntos
Metais Pesados , Poluentes do Solo , Cádmio/análise , Microplásticos , Plásticos , Chumbo/análise , Metais Pesados/análise , Plantas , Solo , Poluentes do Solo/toxicidade , Poluentes do Solo/análiseRESUMO
The role of diverse soil microbiota in restoring erosion-induced degraded lands is well recognized. Yet, the facilitative interactions among symbiotic arbuscular mycorrhizal (AM) fungi, rhizobia, and heterotrophic bacteria, which underpin multiple functions in eroded ecosystems, remain unclear. Here, we utilized quantitative microbiota profiling and ecological network analyses to explore the interplay between the diversity and biotic associations of root-associated microbiota and multifunctionality across an eroded slope of a Robinia pseudoacacia plantation on the Loess Plateau. We found explicit variations in slope multifunctionality across different slope positions, associated with shifts in limiting resources, including soil phosphorus (P) and moisture. To cope with P limitation, AM fungi were recruited by R. pseudoacacia, assuming pivotal roles as keystones and connectors within cross-kingdom networks. Furthermore, AM fungi facilitated the assembly and composition of bacterial and rhizobial communities, collectively driving slope multifunctionality. The symbiotic association among R. pseudoacacia, AM fungi, and rhizobia promoted slope multifunctionality through enhanced decomposition of recalcitrant compounds, improved P mineralization potential, and optimized microbial metabolism. Overall, our findings highlight the crucial role of AM fungal-centered microbiota associated with R. pseudoacacia in functional delivery within eroded landscapes, providing valuable insights for the sustainable restoration of degraded ecosystems in erosion-prone regions.
RESUMO
To synergistically enhance the adsorption and photocatalytic performance of Bi2WO6 and Bi2MoO6, using activated biochar (ACB) as substrate, ACB-Bi2WO6 and ACB-Bi2MoO6 composites were facilely prepared by hydrothermal synthesis. Their adsorption-photocatalytic degradation effects on rhodamine B (RhB), tetracycline (TC), and norfloxacin (NOR) were comparatively investigated. Additionally, the effects of environmental factors, wastewater treatment tests, and disinfection were systematically studied, and the enhancement mechanisms and reasons for the degradation differences were highlighted. The results showed that ACB-Bi2WO6 and ACB-Bi2MoO6 were confirmed to form intimately contacted heterojunctions by various advanced characterization techniques. The introduction of ACB narrowed the band-gap energy of Bi2WO6 and Bi2MoO6, and improved the visible light absorption range and specific surface area. The optimal loading ratios of ACB-Bi2WO6 and ACB-Bi2MoO6 were 1:1.06 and 1:0.58, respectively. The removal rate of ACB-Bi2WO6 for high concentrations of RhB (200 mg·L-1), TC and NOR (50 mg·L-1) were 89.15%, 87.27%, and 72.17%, respectively, which were higher than those of ACB-Bi2MoO6 and significantly stronger than those of Bi2WO6 and Bi2MoO6. This was attributed to the more effective inhibition of photogenerated carrier recombination, higher absorbance, and uniform morphology via ACB-Bi2WO6. ·OH and holes were dominant active species in photocatalysis, and the possible photogenerated carrier transfer path is type II heterojunction. Furthermore, ACB-Bi2WO6 possessed good reusability, and the removal of RhB and TC from the actual wastewater exceeded 80.63% and 58.54%, respectively. The sterilization rates of ACB-Bi2WO6 reached 99% and 95% for E. coli and S. aureus within 24 h, respectively. Therefore, ACB-Bi2WO6 was more recommended for environmental applications.
Assuntos
Desinfecção , Poluentes Ambientais , Adsorção , Antibacterianos , Escherichia coli , Norfloxacino , Staphylococcus aureus , TetraciclinaRESUMO
Inoculation with growth-promoting rhizobacteria inoculation and the addition of exogenous signaling molecules are two distinct strategies for improving heavy metal resistance and promoting growth in crops through several mechanisms. However, whether rhizobacteria and phyllosphere signaling molecules can act synergistically alleviate heavy metal stress and promote growth and the mechanisms underlying these effects remain unclear. Here, a novel strategy involving the co-application of growth-promoting rhizobacteria and an exogenous signaling molecule was developed to reduce cadmium (Cd) phytotoxicity and promote pak choi growth in Cd-contaminated soil. We found that the co-application of Azospirillum brasilense and hydrogen sulfide (H2S) resulted in significant improvements in shoot biomass and antioxidant enzyme content and a decline in the levels of Cd translocation factors. In addition, this co-application significantly improved pak choi Cd resistance. Furthermore, we observed a significant negative correlation between abscisic acid concentration and Cd content of pak choi and a positive correlation between H2S concentration and biomass. These findings revealed that the co-application of rhizobacteria and exogenous signaling molecules synergistically promoted the growth of vegetable crops subjected to heavy metal stress. Our results may serve as a guide for improving the food safety of crops grown in soil contaminated with heavy metals.
Assuntos
Azospirillum brasilense , Brassica , Cádmio/toxicidade , Ácido Abscísico , Produtos Agrícolas , SoloRESUMO
To explore the effect of micronization on the structural, functional, and antioxidant properties of wheat bran, wheat bran with mean particle size (D50) of 46.08, 34.29, 26.51, 26.35, and 26.05 µm were prepared by using an ultrafine pulverizer under different rolling frequencies (0, 6, 9, 12, and 15 times). The main chemical components and structural, functional, and antioxidant properties of the wheat bran were compared and a correlation analysis was conducted. As the D50 of the wheat bran decreased from 46.08 µm to 26.05 µm, the micromorphology exhibited the destruction of the bundle structure, which is formed by starch and fiber, during which the starch particles peeled off, the fiber fragments destructed, and some of the slim fiber fragments attached to the surfaces of the starch granules. According to the X-ray diffraction pattern, part of the crystalline structure was transformed into an amorphous structure and the crystallization index decreased from 13.08% to 3.95%. According to the near-infrared spectrum, more active groups, such as the hydroxyl group, were exposed; however, no new groups were generated. These structural changes accordingly caused changes in the chemical components, functional properties, and antioxidant properties of the wheat bran. Specifically, the protein, total phenols, total flavonoids, and fatty acid content increased by 6.72%, 23.47%, 19.07%, and 172.88%, respectively. The lipase activity, antioxidant activity in vitro (DPPH⢠scavenging activity, ABTS+⢠scavenging activity, and ferric reducing antioxidant power), and the water-holding, cholesterol-adsorption, sodium nitrite-adsorption, and cation-exchange capacities, were enhanced to some extent. The oil-holding capacity decreased from 3.01 g/g to 1.32 g/g. The swelling capacity decreased first and then increased and the swelling capacity of the wheat bran with a D50 of 34.29 µm was the lowest (3.62 mL/g). Therefore, the micronization could be used as a pretreatment method to improve the functional and antioxidant properties of wheat bran; however, the optimal particle size of wheat bran is based on the function of the product.
RESUMO
Microplastics (MPs) are creating an emerging threat on the soil ecosystems and are of great global concern. However, the distribution in soil-plant system, as well as the phytotoxicity and impact mechanisms of MPs remain largely unexplored so far. This study introduced the diverse sources of MPs and showed the significant spatial variation in the global geographic distribution of MPs contamination based on data collected from 116 studies (1003 sampling sites). We systematically discussed MPs phytotoxicity, such as plant uptake and migration to stems and leaves, delaying seed germination, impeding plant growth, inhibiting photosynthesis, interfering with nutrient metabolism, causing oxidative damage, and producing genotoxicity. We further highlighted the alterations of soil structure and function by MPs, as well as their self and load toxicity, as potential mechanisms that threaten plants. Finally, this paper provided several preventive strategies to mitigate soil MPs pollution and presented research gaps in the biogeochemical behavior of MPs in soil-plant systems. Meanwhile, we recommended that methods for the quantitative detection of MPs accumulated in plant tissues should be explored and established as soon as possible. This review will improve the understanding of the environmental behavior of MPs in soil-plant systems and provide a theoretical reference to better assess the ecological risk of MPs.
Assuntos
Microplásticos , Poluentes do Solo , Ecossistema , Plásticos/toxicidade , Solo , Poluentes do Solo/análise , Poluentes do Solo/toxicidadeRESUMO
Soil contamination with potentially toxic elements (PTEs) is an increasing environmental problem, posing serious threats to the living organisms. Phytoremediation is a sustainable and highly accepted technology for remediation of PTE-contaminated soils. Alfalfa has been widely adopted for the phytoremediation of PTE-contaminated soils due to its large biomass productivity, high PTE tolerance, and strong capacity to take up PTEs. However, there are still no literature reviews systematically summarized the potential of alfalfa in the phytoremediation. Therefore, we review the available literatures that present its PTE uptake, phytotoxicity, tolerance mechanisms, and aided techniques improving the phytoremediation efficiency. In this review, alfalfa shows high amounts of PTEs accumulation, especially in their root tissue. Meanwhile, the inner mechanisms of PTE tolerance and accumulation in alfalfa are discussed including: (i) the activation of antioxidant enzyme system, (ii) subcellular localization, (iii) production of glutathione, phytochelatins, and proline, and (iv) regulation of gene expression. Indeed, excessive PTE can overcome the defense system, which causes oxidative damage in alfalfa plants, thereby inhibiting growth and physiological processes and weakening the ability of PTE uptake. Till now, several approaches have been developed to improve the tolerance and/or accumulation of PTE in alfalfa plants as follows: (i) selection of PTE tolerant cultivars, (ii) applying plant growth regulators, (iii) addition of chelating agents, fertilizer, and biochar materials, and (iv) inoculation of soil microbes. Finally, we indicate that the selection of PTE-tolerant cultivars along with inoculation of soil microbes may be an efficient and eco-friendly strategy of the soil PTE phytoremediation.
Assuntos
Poluentes do Solo , Solo , Biodegradação Ambiental , Medicago sativa/metabolismo , Plantas/metabolismo , Poluentes do Solo/análiseRESUMO
Biochar is beneficial for soil amendment, but further research is still required on changes in its physicochemical properties during aging, especially in oxygen-containing functional groups and associated adsorption behaviors. Here, we used two different biochars, apple tree branch biochar and maize stalk biochar, and simulated the aging process by using freeze-thaw cycles, dry-wet cycles, and chemical oxidation methods. We investigated the changes in the physicochemical properties and Pb adsorption behavior of the biochars before and after aging treatments. The characterization results showed that the biochar surface structure changed after aging treatments. In general, the specific surface areas (SSAs) of the two biochars increased after chemical oxidation treatment but decreased after the other two treatments. The elemental content analyses indicated a decrease in the C content and increase in O content after artificial aging. In addition, the content of oxygen-containing functional groups in most biochars is increasing after treatment. The increase or decrease in SSA resulted in an increase or decrease in adsorption sites, respectively, thereby enhancing or reducing the adsorption capacity of the biochar. Furthermore, oxygen-containing functional groups enhanced the Pb adsorption capacity of biochar by complexation of free carboxyl and hydroxyl functional groups with Pb. Our research indicated that aging can lead to changes in the Pb adsorption capacity of biochar and that these changes vary depending on the type of aging and biochar. Our results will help to provide a better understanding of the changes in physicochemical properties and Pb adsorption capacity of biochar during the aging process in soil toward making full use of biochar for soil amendment.
Assuntos
Carvão Vegetal/química , Chumbo/química , Poluentes do Solo/química , Adsorção , Oxirredução , Solo/químicaRESUMO
Biochar can act as an adsorbent for phosphate removal from water sources, which can be highly beneficial in limiting eutrophication and recycling elemental phosphorus (P). However, it is difficult to use a single biochar material to overcome problems such as low adsorption efficiency, difficulty in reuse, and secondary pollution. This study addresses these challenges using a novel core-shell structure γ-Al2O3/Fe3O4 biochar adsorbent (AFBC) with significant P uptake capabilities in terms of its high adsorption capacity (205.7 mg g-1), magnetic properties (saturation magnetization 24.70 emu g-1), and high reuse stability (91.0% removal efficiency after five adsorption-desorption cycles). The highest partition coefficient 1.04 mg g-1 µM-1, was obtained at a concentration of 322.89 µM. Furthermore, AFBC exhibited strong regeneration ability in multiple cycle trials, making it extremely viable for sustainable resource management. P removal mechanisms, i.e., electrostatic attraction and inner-sphere complexation, were explained using Fourier transform infrared (FT-IR) spectra and X-ray photoelectron spectroscopy (XPS) measurements. A surface complexation model was established by considering the formation of monodentate mononuclear and bidentate binuclear surface complexes of P to illustrate the adsorption process. Owing to its high adsorption efficiency, easy separation from water, and environmental friendliness, AFBC is a potential adsorbent for P recovery from polluted waters.
Assuntos
Carvão Vegetal/química , Adsorção , Compostos de Alumínio , Compostos Férricos , Cinética , Fosfatos , Fósforo , Espectroscopia de Infravermelho com Transformada de Fourier , Poluentes Químicos da ÁguaRESUMO
Phosphate pollution of aquatic ecosystems is of great concern and requires the development of high-performance materials for effective pollution treatment. To realize efficient phosphate removal from aqueous solution, an easily separable magnetic (Fe3O4) Caragana korshinskii biochar/Mg-Al layered double hydroxide composite (denoted as FCB/MAC) was synthesized via two-step electro-assisted modification for the first time. Subsequently, the physical and chemical properties of FCB/MAC were characterized. Furthermore, the sorption mechanism for phosphate removal was investigated in detail. The results indicated that Fe3O4 and the Mg-Al layered double hydroxide were successfully embedded in the biochar matrix. Moreover, FCB/MAC exhibited a high phosphate adsorption capacity and excellent magnetic properties for easy recovery. The maximum phosphate sorption capacity of FCB/MAC was 252.88 mg g-1, which is much higher than the capacities of most magnetic phosphate adsorbents. In addition, the adsorption kinetics and isotherms indicated that phosphate adsorption by FCB/MAC was controlled by the pseudo-second-order kinetic model and the Langmuir-Freundlich isotherm model. The phosphate adsorption mechanism involves anion exchange, electrostatic attraction, and ligand exchange. After five adsorption-desorption cycles, the phosphate adsorption capacity of FCB/MAC was 25.71 mg g-1 with 51.43% removal efficiency and high recyclability. Thus, the composite prepared in this study is a promising adsorbent for phosphate removal from aqueous solution, and this work provides an excellent reference for constructing novel biochar-based phosphate adsorbents.