RESUMO
Asteroid interiors play a key role in our understanding of asteroid formation and evolution. As no direct interior probing has been done yet, characterisation of asteroids' interiors relies on interpretations of external properties. Here we show, by numerical simulations, that the top-shaped rubble-pile asteroid (101955) Bennu's geophysical response to spinup is highly sensitive to its material strength. This allows us to infer Bennu's interior properties and provide general implications for top-shaped rubble piles' structural evolution. We find that low-cohesion (â²0.78 Pa at surface and â²1.3 Pa inside) and low-friction (friction angle â² 35∘) structures with several high-cohesion internal zones can consistently account for all the known geophysical characteristics of Bennu and explain the absence of moons. Furthermore, we reveal the underlying mechanisms that lead to different failure behaviours and identify the reconfiguration pathways of top-shaped asteroids as functions of their structural properties that either facilitate or prevent the formation of moons.
RESUMO
The Mars 2020 Perseverance rover landed on February 18, 2021, and has started ground operations. The ExoMars Rosalind Franklin rover will touch down on June 10, 2023. Perseverance will be the first-ever Mars sample caching mission-a first step in sample return to Earth. SuperCam and Scanning Habitable Environments with Raman & Luminescence for Organics & Chemicals (SHERLOC) on Perseverance, and Raman Laser Spectrometer (RLS) on Rosalind Franklin, will comprise the first ever in situ planetary mission Raman spectroscopy instruments to identify rocks, minerals, and potential organic biosignatures on Mars' surface. There are many challenges associated when using Raman instruments and the optimization and quantitative analysis of resulting data. To understand how best to overcome them, we performed a comprehensive Raman analysis campaign on CanMars, a Mars sample caching rover analog mission undertaken in Hanksville, Utah, USA, in 2016. The Hanksville region presents many similarities to Oxia Planum's past habitable conditions, including liquid water, flocculent, and elemental compounds (such as clays), catalysts, substrates, and energy/food sources for life. We sampled and conducted a complete band analysis of Raman spectra as mission validation analysis with the RLS ExoMars Simulator or RLS Sim, a breadboard setup representative of the ExoMars RLS instrument. RLS Sim emulates the operational behavior of RLS on the Rosalind Franklin rover. Given the high fidelity of the Mars analog site and the RLS Sim, the results presented here may provide important information useful for guiding in situ analysis and sample triage for caching relevant for the Perseverance and Rosalind Franklin missions. By using the RLS Sim on CanMars samples, our measurements detected oxides, sulfates, nitrates, carbonates, feldspars, and carotenoids, many with a higher degree of sensitivity than past results. Future work with the RLS Sim will aim to continue developing and improving the capability of the RLS system in the future ExoMars mission.
Assuntos
Exobiologia , Marte , Planeta Terra , Exobiologia/métodos , Lasers , Minerais/análiseRESUMO
NASA's first asteroid sample return mission, OSIRIS-REx, collected a sample from the surface of near-Earth asteroid Bennu in October 2020 and will deliver it to Earth in September 2023. Selecting a sample collection site on Bennu's surface was challenging due to the surprising lack of large ponded deposits of regolith particles exclusively fine enough ( ≤ 2 cm diameter) to be ingested by the spacecraft's Touch-and-Go Sample Acquisition Mechanism (TAGSAM). Here we describe the Sampleability Map of Bennu, which was constructed to aid in the selection of candidate sampling sites and to estimate the probability of collecting sufficient sample. "Sampleability" is a numeric score that expresses the compatibility of a given area's surface properties with the sampling mechanism. The algorithm that determines sampleability is a best fit functional form to an extensive suite of laboratory testing outcomes tracking the TAGSAM performance as a function of four observable properties of the target asteroid. The algorithm and testing were designed to measure and subsequently predict TAGSAM collection amounts as a function of the minimum particle size, maximum particle size, particle size frequency distribution, and the tilt of the TAGSAM head off the surface. The sampleability algorithm operated at two general scales, consistent with the resolution and coverage of data collected during the mission. The first scale was global and evaluated nearly the full surface. Due to Bennu's unexpected boulder coverage and lack of ponded regolith deposits, the global sampleability efforts relied heavily on additional strategies to find and characterize regions of interest based on quantifying and avoiding areas heavily covered by material too large to be collected. The second scale was site-specific and used higher-resolution data to predict collected mass at a given contact location. The rigorous sampleability assessments gave the mission confidence to select the best possible sample collection site and directly enabled successful collection of hundreds of grams of material.
RESUMO
Laser-induced fluorescence spectroscopy is a useful laboratory and in situ technique for planetary exploration, with applications in biosignature detection and the search for life on Mars. However, little work has been completed on the utility of fluorescence spectroscopy techniques on asteroid relevant material. In preparation for asteroid sample return missions such as NASA's OSIRIS-REx and JAXA's Hayabusa2, we conducted UV time resolved laser-induced fluorescence spectroscopy (TR-LIF) analysis of 10 amino acids, all of which have been found in the carbonaceous meteorites Murchison and Allende. We present the calculation of decay rates of each amino acid (1.55-3.56 ns) and compare with those of relevant homogeneous minerals (15-70 ns). Moreover, we demonstrate a linear relationship between calculated lifetimes and elemental abundance of nitrogen and carbon (p < 0.025). The quantitative and qualitative fluorescence analyses presented in this work will lead to more reliable identification of organic material within meteorites and asteroids in a time-efficient, minimally destructive way.
Assuntos
Meteoroides , Aminoácidos , Exobiologia , Lasers , Espectrometria de FluorescênciaRESUMO
Understanding the distribution of trace organic material in a rocky environment is a key to constraining the material requirements for sustaining microbial life. We used an ultraviolet laser-induced fluorescence (LIF) spectroscopy instrument to characterize the distribution of organic biosignatures in basalts collected from two Mars-analog environments. We correlated the fluorescence results with alteration-related sample properties. These samples exhibit a range of alteration conditions found in the volcanic environments of Hawai'i Volcanoes National Park, Hawai'i (HI), and Craters of the Moon National Monument, Idaho (ID), including fumarolic systems. LIF mapping of the sample surfaces and interiors showed a heterogeneous distribution of areas of highly fluorescent material (point[s]-of-interest [POIs])-with fluorescence characteristics indicative of organic material. Results suggest that POIs are associated with secondary alteration mineral deposits in the rock's vesicles, including zeolites and calcite. Scanning electron microscopy with electron-dispersive X-ray spectroscopy was used to characterize the mineralogy present at POIs and support the evidence of carbon-bearing material. Overall, samples collected proximate to active or relict meteoric fumaroles from Hawai'i were shown to contain evidence for organic deposits. This suggests that these minerals are measurable spectroscopic targets that may be used to inform sample-site selection for astrobiology research.
Assuntos
Exobiologia , Marte , Meio Ambiente Extraterreno , Havaí , Lasers , Minerais/análise , Espectrometria de FluorescênciaRESUMO
One of the primary objectives of planetary exploration is the search for signs of life (past, present, or future). Formulating an understanding of the geochemical processes on planetary bodies may allow us to define the precursors for biological processes, thus providing insight into the evolution of past life on Earth and other planets, and perhaps a projection into future biological processes. Several techniques have emerged for detecting biomarker signals on an atomic or molecular level, including laser-induced breakdown spectroscopy (LIBS), Raman spectroscopy, laser-induced fluorescence (LIF) spectroscopy, and attenuated total reflectance Fourier transform infrared (ATR FT-IR) spectroscopy, each of which addresses complementary aspects of the elemental composition, mineralogy, and organic characterization of a sample. However, given the technical challenges inherent to planetary exploration, having a sound understanding of the data provided from these technologies, and how the inferred insights may be used synergistically is critical for mission success. In this work, we present an in-depth characterization of a set of samples collected during a 28-day Mars analog mission conducted by the Austrian Space Forum in the Dhofar region of Oman. The samples were obtained under high-fidelity spaceflight conditions and by considering the geological context of the test site. The specimens were analyzed using the LIBS-Raman sensor, a prototype instrument for future exploration of Mars. We present the elemental quantification of the samples obtained from LIBS using a previously developed linear mixture model and validated using scanning electron microscopy energy dispersive spectroscopy. Moreover, we provide a full mineral characterization obtained using ultraviolet Raman spectroscopy and LIF, which was verified through ATR FT-IR. Lastly, we present possible discrimination of organics in the samples using LIF and time-resolved LIF. Each of these methods yields accurate results, with low errors in their predictive capabilities of LIBS (median relative error ranging from 4.5% to 16.2%), and degree of richness in subsequent inferences to geochemical and potential biochemical processes of the samples. The existence of such methods of inference and our ability to understand the limitations thereof is crucial for future planetary missions, not only to Mars and Moon but also for future exoplanetary exploration.
RESUMO
The Mars 2020 mission will analyze samples in situ and identify any that could have preserved biosignatures in ancient habitable environments for later return to Earth. Highest priority targeted samples include aqueously formed sedimentary lithologies. On Earth, such lithologies can contain fossil biosignatures as aromatic carbon (kerogen). In this study, we analyzed nonextracted kerogen in a diverse suite of natural, complex samples using colocated UV excitation (266 nm) time-gated (UV-TG) Raman and laser-induced fluorescence spectroscopies. We interrogated kerogen and its host matrix in samples to (1) explore the capabilities of UV-TG Raman and fluorescence spectroscopies for detecting kerogen in high-priority targets in the search for possible biosignatures on Mars; (2) assess the effectiveness of time gating and UV laser wavelength in reducing fluorescence in Raman spectra; and (3) identify sample-specific issues that could challenge rover-based identifications of kerogen using UV-TG Raman spectroscopy. We found that ungated UV Raman spectroscopy is suited to identify diagnostic kerogen Raman bands without interfering fluorescence and that UV fluorescence spectroscopy is suited to identify kerogen. These results highlight the value of combining colocated Raman and fluorescence spectroscopies, similar to those obtainable by SHERLOC on Mars 2020, to strengthen the confidence of kerogen detection as a potential biosignature in complex natural samples. Key Words: Raman spectroscopy-Laser-induced fluorescence spectroscopy-Mars Sample Return-Mars 2020 mission-Kerogen-Biosignatures. Astrobiology 18, 431-453.