The Application of Template Selectophores for the Preparation of Molecularly Imprinted Polymers.

Molecularly imprinted polymers are versatile materials with wide application scope for the detection, capture and separation of specific compounds present in complex feed stocks. A major challenge associated with their preparation has been the need to sacrifice one mole equivalent of the template molecule to generate the complementary polymer cavities that selectively bind the target molecule. Moreover, template molecules can often be difficult to synthesise, expensive or lack stability. In this study, we describe a new approach, directed at the use of synthetic selectophores, chosen as readily prepared and low cost structural analogues with recognition groups in similar three-dimensional arrangements as found in the target molecule. To validate the approach, a comparative study of selectophores related to the polyphenolic compound (E)-resveratrol has been undertaken using traditional and green chemical synthetic approaches. These molecular mimic compounds were employed as polymer templates and also as binding analytes to interrogate the recognition sites associated with the molecularly imprinted polymers. Importantly, the study confirms that the use of selectophores has the potential to confer practical advantages, including access to more efficient methods for selection and preparation of suitable template molecules with a broader range of molecular diversity, as well as delivering imprinted polymers capable of recognizing the target compound and structurally related products.

Parallel enrichment of polyphenols and phytosterols from Pinot noir grape seeds with molecularly imprinted polymers and analysis by capillary high-performance liquid chromatography electrospray ionisation tandem mass spectrometry.

This investigation describes an integrated workflow for the parallel extraction and recovery of polyphenols and phytosterols from Pinot noir grape seeds. Using (E)-resveratrol and stigmasterol as exemplars, the approach employs two different molecular imprinted polymers in tandem for the extraction of these compounds and their subsequent analysis by capillary high-performance liquid chromatography (capHPLC) interfaced with electrospray ionisation tandem mass spectrometry (ESI MS/MS). Information on the selectivity of the solid-phase extraction processes was obtained through analysis of the binding behaviour of (E)-resveratrol- and stigmasterol-imprinted polymers using structurally similar polyphenols or phytosterols with the extent of binding determined from the capHPLC-ion trap ESI MS/MS data. This study documents with Pinot noir grape seed extracts and optimised solid-phase extraction protocols that the (E)-resveratrol-templated MIP enabled a very high recovery (99%) of the health-beneficial polyphenol (E)-resveratrol with co-purification of procyanidin and catechin/epicatechin. Further, the stigmasteryl-3-O-methacrylate-templated polymer resulted in high recovery (96%) of the phytosterol stigmasterol with co-purification of campesteryl glycoside. The results also demonstrate that rapid and high-resolution capHPLC-ESI MS/MS methods can be used as part of the work flow for selectivity optimisation and monitoring of the performance of MIPs intended for use in the solid-phase extraction of bioactive molecules with nutraceutical properties from agricultural waste streams.

Application of linear solvation energy relationships and principal component analysis methods for the prediction of the retention behaviour of E-resveratrol analogues with substituted silica hydride stationary phases.

In this investigation, application of linear solvent energy relationships (LSERs) and principal component analysis (PCA) methods have been employed to investigate the structure-retention dependencies of E-resveratrol analogues separated under different stationary and mobile phase conditions. To this end, the retention of 22 analogues have been determined with phenyl, diol, bidentate anchored C18 (BDC18) and Diamond Hydride™ C18 (DHC18) substituted silica hydride stationary phases under isocratic chromatographic conditions using mobile phases containing 0.1 (% v/v) formic acid and different acetonitrile or methanol contents from 10 to 90% (v/v) in 10% increments. In general, these compounds showed decreasing retention with increased acetonitrile or methanol content in the mobile phase with all the stationary phases. The retention order generally followed their log P values, although some unique selectivity variations were apparent depending on the nature of the selected stationary and mobile phases. These 22 compounds contained different backbone functionalities linking the phenyl ring A to phenyl ring B and different numbers of hydroxyl groups in the phenyl ring A/phenyl ring B. Structure-retention descriptors, derived according to LSER concepts, were analysed by PCA methods to provide group classification of these resveratrol analogues from the associated PC1 versus PC2 score plots. These results revealed that the selectivity of these compounds was dominated by hydrophobic and steric interactions. Based on the number and position of hydroxyl groups in a specific resveratrol analogue, a reliable curve fitting approach (indicated by R2 > 0.99 for the correlation between experimental and predicted log k values) was derived for prediction of the retention of these analytes under different mobile phase isocratic separation conditions. The application of similar methods are anticipated to find general utility for the analysis of diverse classes of other low molecular mass compounds in the different modes of liquid chromatography, permitting enhanced levels of prediction and evaluation of the retention attributes of polar and non-polar compounds.

Design, synthesis and application of a new class of stimuli-responsive separation materials.

A new class of efficient stationary phase has been investigated for use in the liquid chromatographic separation of low molecular weight analytes and high molecular weight biomolecules, based on the application of immobilised stimuli-responsive polymers (SRPs). To this end, two polymeric units, namely poly(2-dimethylaminoethyl methacrylate) (PDMAEMA) and poly(acrylic acid) (PAA) were tethered to a triazine core. The derived poly(2-dimethyl-aminoethyl methacrylate)-block-poly(acrylic acid) (PDMAEMA-b-PAA), as a diblock co-polymer, was then immobilised onto the surface of porous silica particles. The performance of this microparticulate adsorbent was evaluated under various temperature, ionic strength and/or pH conditions in packed columns in a high-performance liquid chromatography (HPLC) format. Baseline separations of a variety of low molecular weight analytes were achieved at different temperatures with this SRP-based adsorbent using 10 mM sodium phosphate buffer, pH 6.0, as the mobile phase. Moreover, when the ionic strength of the mobile phase was increased to 40 mM sodium phosphate buffer, pH 6.0, similar temperature changes resulted in further increases in resolution for the hydrophobic analytes. In addition, changes in the pH of the mobile phase from pH 6.0 to pH 8.0 led to significant changes in selectivity of the analytes, including reversal in their elution orders. Upon increasing the temperature, the retention times of all analytes decreased but without loss of resolution. These findings can be attributed to the consequence of the immobilised copolymer undergoing a phase transition at its lower critical solution temperature (LCST), which leads to changes in its solvated structure, including how the electrostatic, hydrophilic and hydrophobic regions/domains of the copolymer are exposed to the bulk mobile phase. Thermodynamic data were indicative of a temperature-related re-organisation of the structure of the immobilised PDMAEMA-b-PAA stationary phase with exothermic binding of the analytes occurring at temperatures below the lower critical solution temperature (LCST). In this manner; changes in the system temperature could directly be used to manipulate the adsorption and desorption behaviour of these analytes with this stimuli-responsive, polymer-modified porous silica stationary phase. Additional studies with several proteins further documented the versatility of these stimuli-responsive separation materials. The results indicated that these separations could be tuned by variation of the temperature with fully aqueous mobile phases at specific ionic strength and pH values, without the need to use an organic solvent as a component in the mobile phase.

Sequential molecularly imprinted solid-phase extraction methods for the analysis of resveratrol and other polyphenols.

Molecularly imprinted polymers (MIPs) templated with either the phytoalexin, (E)-resveratrol, or its structural analog, 3,5-dihydroxy-N-(4-hydroxyphenyl)benzamide, have been used in tandem for the sequential extraction of (E)-resveratrol from aqueous peanut meal extracts in high purity and in near quantitative yields. Re-processing of the (E)-resveratrol-depleted peanut meal extract with the 3,5-dihydroxy-N-(4-hydroxyphenyl)benzamide imprinted MIP yielded additional polyphenolic components, identified as A-type procyanidins. Tandem liquid chromatography-electrospray ionization mass spectrometry confirmed the identity and purity of the isolated products. This study documents the advantages of tandem approaches with MIPs for the solid phase extraction and analysis of multiple bioactive compounds present in complex biomass waste streams.

Application of pH-responsive poly(2-dimethyl-aminoethylmethacrylate)-block-poly(acrylic acid) coatings for the open-tubular capillary electrochromatographic analysis of acidic and basic compounds.

A new type of stimuli-responsive polymeric (SRP) coating has been prepared for use in open tubular capillary electrochromatography (OT-CEC), by grafting poly(2-dimethylaminoethylmethacrylate)-block-poly(acrylic acid) (PDMAEMA-b-PAA) as a Y-shaped block copolymer with two dissimilar chain compositions onto the inner walls of aminopropyl-modified silica capillaries. The grafting process introduced weakly charged functional groups from the PAA and PDMAEMA, enabling the generation of electroendosmotic flow with magnitude and direction adjustable by changing the pH of the running buffer electrolyte. This stimuli-responsive PDMAEMA-b-PAA block copolymer was found to provide excellent resolution of various acidic and basic compounds, leading to efficient analyte separation. When operated in the OT-CEC mode, separation selectivities could be readily manipulated via differential contributions from chromatographic and electrophoretic mechanisms, simply by changing the pH or the ionic strength of the running buffer electrolyte.

Selectivity mapping of the binding sites of (E)-resveratrol imprinted polymers using structurally diverse polyphenolic compounds present in Pinot noir grape skins.

This investigation describes a general procedure for the selectivity mapping of molecularly imprinted polymers, using (E)-resveratrol-imprinted polymers as the exemplar, and polyphenolic compounds present in Pinot noir grape skin extracts as the test compounds. The procedure is based on the analysis of samples generated before and after solid-phase extraction of (E)-resveratrol and other polyphenols contained within the Pinot noir grape skins using (E)-resveratrol-imprinted polymers. Capillary reversed-phase high-performance liquid chromatography (RP-HPLC) and electrospray ionisation tandem mass spectrometry (ESI MS/MS) was then employed for compound analysis and identification. Under optimised solid-phase extraction conditions, the (E)-resveratrol-imprinted polymer showed high binding affinity and selectivity towards (E)-resveratrol, whilst no resveratrol was bound by the corresponding non-imprinted polymer. In addition, quercetin-3-O-glucuronide and a dimer of catechin-methyl-5-furfuraldehyde, which share some structural features with (E)-resveratrol, were also bound by the (E)-resveratrol-imprinted polymer. Polyphenols that were non-specifically retained by both the imprinted and non-imprinted polymer were (+)-catechin, a B-type procyanidin and (-)-epicatechin. The compounds that did not bind to the (E)-resveratrol molecularly imprinted polymer had at least one of the following molecular characteristics in comparison to the (E)-resveratrol template: (i) different spatial arrangements of their phenolic hydroxyl groups, (ii) less than three or more than four phenolic hydroxyl groups, or (iii) contained a bulky substituent moiety. The results show that capillary RP-HPLC in conjunction with ESI MS/MS represent very useful techniques for mapping the selectivity of the binding sites of imprinted polymer. Moreover, this procedure permits performance monitoring of the characteristics of molecularly imprinted polymers intended for solid-phase extraction of bioactive and nutraceutical molecules from diverse agricultural waste sources.

Recovery of ergosterol from the medicinal mushroom, Ganoderma tsugae var. Janniae, with a molecularly imprinted polymer derived from a cleavable monomer-template composite.

A semi-covalent imprinting strategy has been developed for the synthesis of molecularly-imprinted polymers specific for the fungal sterol, ergosterol, a biological precursor of vitamin D2. This imprinting approach involved a novel post-synthesis cleavable monomer-template composite, namely ergosteryl methacrylate, and resulted in the formation of an imprinted polymer that selectively and efficiently recognized ergosterol through non-covalent interactions. The derived molecularly-imprinted polymer and the corresponding non-imprinted polymer were systematically evaluated for their selectivity towards ergosterol via static and dynamic binding studies using various ergosteryl esters (e.g. ergosteryl-cinnamate, -ferulate, -coumarate, -ferulate acetate and -acetate, respectively) as competitors. Moreover, the binding capacity of the molecularly imprinted polymer for ergosterol was enhanced when the sample loading conditions involved the use of partially aqueous solvent mixtures, such as acetonitrile/water (9:1 (v/v) or 8:2 (v/v)). These attributes were exploited in a solid-phase extraction format, whereby ergosterol was obtained with excellent recoveries from an extract of the fruiting body powder of the medicinal fungus Ganoderma tsugae var. Janniae.

A comparison of covalent and non-covalent imprinting strategies for the synthesis of stigmasterol imprinted polymers.

Non-covalent and covalent imprinting strategies have been investigated for the synthesis of stigmasterol imprinted polymers. The synthesized molecularly imprinted polymers (MIPs) were then evaluated for their recognition and selectivity towards stigmasterol via static and dynamic batch-binding assays and their performance measured against control non-imprinted polymers (NIPs). MIPs prepared using the conventional non-covalent imprinting method displayed little to no binding affinity for stigmasterol under various conditions. In contrast, the application of a covalent imprinting approach using the novel post-synthetically cleavable monomer-template composite stigmasteryl-3-O-methacrylate resulted in the fabrication of a MIP that successfully recognized stigmasterol in both organic and partially aqueous environments. The affinity and selectivity of the covalently prepared MIP was enhanced when undertaken in a partially aqueous environment consisting of an acetonitrile/water (9:1, v/v) solvent mixture. These features have been exploited in a molecularly imprinted solid-phase extraction (MISPE) format, wherein the preferential retention of stigmasterol (with an imprint factor of 12) was demonstrated with 99% recovery in comparison to cholesterol (imprint factor of 6) and ergosterol (imprint factor of 4) while in the presence of several closely related steryl analogues.

Rapid solid-phase extraction and analysis of resveratrol and other polyphenols in red wine.

Red wine has long been credited as a good source of health-beneficial antioxidants, including the bioactive polyphenols catechin, quercetin, and (E)-resveratrol. In this paper, we report the application of reusable molecularly imprinted polymers (MIPs) for the selective and robust solid-phase extraction (SPE) and rapid analysis of (E)-resveratrol (LOD=8.87×10(-3) mg/L, LOQ=2.94×10(-2) mg/L), along with a range of other polyphenols from an Australian Pinot noir red wine. Optimization of the molecularly imprinted solid-phase extraction (MISPE) protocol resulted in the significant enrichment of (E)-resveratrol and several structurally related polyphenols. These secondary metabolites were subsequently identified by RP-HPLC and µLC-ESI ion trap MS/MS methods. The developed MISPE protocol employed low volumes of environmentally benign solvents selected according to the Green Chemistry principles, and resulted in the recovery of 99% of the total (E)-resveratrol present. These results further demonstrate the potential of generic protocols for the analysis of target compound with health beneficial properties within the food and nutraceutical industries using tailor-made MIPs.

Enrichment of (E)-resveratrol from peanut byproduct with molecularly imprinted polymers.

Molecularly imprinted solid phase extraction (MISPE) has been employed to isolate and concentrate bioactive polyphenols from peanut press waste. To this end, a molecularly imprinted polymer (MIP) templated with the phytoalexin (E)-resveratrol has been prepared via self-assembly with the functional monomer 4-vinylpyridine (4VP) in a 1:3 molar ratio. Subsequent molecular interrogation of the MIP binding sites demonstrated preferential structural selectivity for (E)-resveratrol with respect to other structurally related naturally occurring compounds. This selectivity was subsequently exploited to achieve substantial sample cleanup of peanut press waste under aqueous conditions with significant enrichment of (E)-resveratrol (>60 fold) requiring minimal sample preparation.

Preparation of molecularly imprinted polymers for the selective recognition of the bioactive polyphenol, (E)-resveratrol.

(E)-Resveratrol imprinted polymers have been rationally designed with the aid of molecular modelling and NMR spectroscopic titration techniques to determine the optimal ratio of the template to functional monomer for polymer formation. Based on this approach, (E)-resveratrol imprinted polymers were prepared via non-covalent self-assembly with the functional monomer 4-vinylpyridine (4VP) in a 1:3 molar ratio. Polymerisation in the presence of a cross-linker resulted in rigid block copolymers that had selective capacities towards (E)-resveratrol (e.g. 14 µmol/g) when compared to the non-imprinted reference polymer. The selectivity of these MIPs was also examined using several structurally related polyphenolic compounds to determine the influence of polyphenolic hydroxyl number and position on binding and molecular recognition.