Regulating Electrolyte Solvation Structures via Diluent-Solvent Interactions for Safe High-Voltage Lithium Metal Batteries.

Local high concentration electrolytes (LHCEs) have been proved to be one of the most promising systems to stabilize both high voltage cathodes and Li metal anode for next-generation batteries. However, the solvation structures and interactions among different species in LHCEs are still convoluted, which bottlenecks the further breakthrough on electrolyte development. Here, it is demonstrated that the hydrogen bonding interaction between diluent and solvent is crucial for the construction of LHCEs and corresponding interphase chemistries. The 2,2,2-trifluoroethyl trifluoromethane sulfonate (TFSF) is selected as diluent with the solvent dimethoxy-ethane (DME) to prepare a non-flammable LHCE for high voltage LMBs. This is first find that the hydrogen bonding interaction between TFSF and DME solvent tailors the electrolyte solvation structures by weakening the coordination of DME molecules to Li+ cations and allows more participation of anions in the first solvation shell, leading to the formation of aggregates (AGGs) clusters which are conducive to generating inorganic solid/cathodic electrolyte interphases (SEI/CEIs). The proposed TFSF based LHCE enables the Li||NCM811 (LiNi0.8 Mn0.1 O2 ) batteries to realize >80% capacity retention with a high average Coulombic efficiency of 99.8% for 230 cycles under aggressive conditions (NCM811 cathode: 3.4 mAh cm-2 , cut-off voltage: 4.4 V, and 20 µm Li foil).

Self-Assembly Monolayer Inspired Stable Artificial Solid Electrolyte Interphase Design for Next-Generation Lithium Metal Batteries.

Lithium metal is widely regarded as the "ultimate" anode for energy-dense Li batteries, but its high reactivity and delicate interface make it prone to dendrite formation, limiting its practical use. Inspired by self-assembled monolayers on metal surfaces, we propose a facile yet effective strategy to stabilize Li metal anodes by creating an artificial solid electrolyte interphase (SEI). Our method involves dip-coating Li metal in MPDMS to create an SEI layer that is rich in inorganic components, allowing uniform Li plating/stripping under a low overpotential over 500 cycles in carbonate electrolytes. In comparison, pristine Li metal shows a rapid increase in overpotential after merely 300 cycles, leading to failure soon after. Molecular dynamics simulations demonstrate that this uniform artificial SEI suppresses Li dendrite formation. We further demonstrated its enhanced stability pairing with LiFePO4 and LiNi1-x-yCoxMnyO2 cathodes, highlighting the proposed strategy as a promising solution for practical Li metal batteries.

A novel method for improving optical component smoothing quality in robotic smoothing systems by compensating path errors.

Path deviations caused by geometrical errors in machining equipment significantly affect the machining quality of optical components. To enhance the quality and efficiency of optical component processing, this paper presents a Chebyshev interpolated Levenberg-Marquardt algorithm (CILM) aimed at compensating for path deviations in a robotic smoothing system utilized for optical component processing. First, the positioning accuracy of the robotic smoothing system is measured using a laser tracker. Subsequently, an objective function is constructed based on robot kinematics and error models to optimize the geometric errors in the system. Then, the proposed method is adopted to identify the geometric parameters of the robotic smoothing system to compensate for the smoothing path deviations. The compensation results confirm the effectiveness of the proposed method in enhancing the absolute positioning accuracy of the robotic smoothing system. Additionally, experimental verification is conducted to validate the effectiveness of the proposed method in improving the surface quality of optical components through smoothing path compensation. The results of the three experiments indicate that the proposed CILM achieves optical components with peak-to-valley values 15.70%, 28.7%, and 4.01% lower than those obtained before compensation, along with root mean square of 33.67%, 21.57%, and 10.23% lower than before compensation values, respectively. Moreover, the power spectral density curves of CILM exhibit smoother characteristics in comparison to the curves before compensation.

Biobased Self-Growing Approach toward Tailored, Integrated High-Performance Flexible Lithium-Ion Battery.

Here we present an innovative, universal, scalable, and straightforward strategy for cultivating a resilient, flexible lithium-ion battery (LIB) based on the bacterial-based self-growing approach. The electrodes and separator layers are integrated intrinsically into one unity of sandwich bacterial cellulose integrated film (SBCIF), with various active material combinations and tailored mechanical properties. The flexible LIB thereof showcases prominent deformation tolerance and multistage foldability due to the unique self-generated wavy-like structure. The LTO|LFP (Li4Ti5O12 and LiFePO4) SBCIF-based flexible LIB demonstrates reliable long-term electrochemical stability with high flexibility, by exhibiting a high capacity retention (>95%) after 500 cycles at 1C/1C after experiencing a 10 000 bending/flattening treatment. The LTO|LFP SBCIF battery subjected to a simultaneous bending/flattening and cycling experiment shows an extraordinary capacity retention rate (>68%) after 200 cycles at 1C/1C. The biobased self-growing approach offers an exciting and promising pathway toward the tailored, integrated high-performance flexible LIBs.

Ultrathin and High-Modulus LiBO2 Layer Highly Elevates the Interfacial Dynamics and Stability of Lithium Anode under Wide Temperature Range.

Lithium (Li) metal batteries (LMBs) face huge challenges to achieve long cycling life at wide temperature range owing to the severe dendrite growth at subambient temperature and the intense side reactions with electrolyte at high temperature. Herein, an ultrathin LiBO2 layer with an extremely high Young's modulus of 8.0 GPa is constructed on Li anode via an in situ reaction between Li metal and 4,4,5,5-tetramethyl-1,3,2-dioxa-borolane (TDB) to form LiBO2 @Li anode, which presents two times higher exchange current density than pristine Li anode. The LiBO2 layer presents a strong absorption to Li ions and greatly improves the interfacial dynamics of Li-ion migration, which induces homogenous lithium nucleation and deposition to form a dense lithium layer. Consequently, the Li dendrite growth during cycling at subambient temperature and the side reactions with electrolyte at high temperature are simultaneously suppressed. The LiBO2 @Li/LiNi0.8 Co0.1 Mn0.1 O2 (NCM811) full batteries with limited Li capacity and high cathode mass loading of 9.9 mg cm-2 can steadily cycle for 300 cycles with a capacity retention of 86.6%. The LiBO2 @Li/NCM811 full batteries and LiBO2 @Li/LiBO2 @Li symmetric batteries also present excellent cycling performance at both -20 and 60 °C. This work develops a strategy to achieve outstanding performance of LMBs at wide working temperature-range.

Lithiophilic Zn Sites in Porous CuZn Alloy Induced Uniform Li Nucleation and Dendrite-free Li Metal Deposition.

Three-dimensional (3D) lithiophilic host is one of the most effective ways to regulate the Li dendrites and volume change in working Li metal anode. The state-of-the-art 3D lithiophilic hosts are facing one main challenge in that the lithiophilic layer would melt or fall off in high-temperature environment when using the thermal infusion method. Herein, a 3D porous CuZn alloy host containing anchored lithiophilic Zn sites is employed to prestore Li using the thermal infusion strategy, and a 3D composite Li is thus fabricated. Benefiting from the lithiophilic Zn sites with a strong adsorption capacity with Li, which is based on the analyses of the nucleation overpotential, binding energy calculation, and the operando optical observation of Li plating/stripping behaviors, facile uniform Li nucleation and dendrite-free Li deposition could be achieved in the interior of the 3D porous CuZn alloy host and the 3D composite Li shows remarkable enhancement in electrochemical performance.

Self-Regulated Phenomenon of Inorganic Artificial Solid Electrolyte Interphase for Lithium Metal Batteries.

Solid electrolyte interphase (SEI) is crucial for suppressing Li dendrite growth in high-energy lithium metal (LiM) batteries. Unfortunately, the naturally formed SEI on the LiM anode surface in carbonate electrolytes cannot suppress Li dendrites, resulting in a continuous consumption of electrolytes and LiM during cycling. Artificial SEI normally lacks self-healing and self-regulating capability, gradually losing the effectiveness during cycling. In this work, we report the self-regulating phenomenon of LiRAP-ASEI that can effectively suppress Li dendrites and is investigated using in situ optical microscopy and COMSOL multiphysics simulation. The effectiveness of self-regulated LiRAP-ASEI is further evaluated in the most aggressive Li/sulfur cells with a lean electrolyte (10 µL mAh-1) and LiRAP-ASEI/LiM (2.5-fold excess of LiM). The LiRAP@Cu∥sulfur@C cells show a stable 3000 cycle life at a current density of 11.5 mA cm-2. The self-regulated phenomenon holds great promise for the development of high-energy-density LMBs.

Freestanding Lamellar Porous Carbon Stacks for Low-Temperature-Foldable Supercapacitors.

High-performance supercapacitors (SCs) are important energy storage components for emerging wearable electronics. Rendering low-temperature foldability to SCs is critically important when wearable devices are used in a cold environment. However, currently reported foldable SCs do not have a stable electrochemical performance at subzero temperatures, while those that are performing are not foldable. Herein, a freestanding pure-carbon-based porous electrode, namely, lamellar porous carbon stack (LPCS), is reported, which enables stable low-temperature-foldable SCs. The LPCS, which is fabricated with a simple vacuum filtration of a mixture of carbon fibers (CFs), holey reduced graphene oxides (HRGOs), and carbon nanotubes (CNTs), possesses a lamellar stacking of porous carbon thin sheets, in which the CFs act as the skeleton and the HRGOs and CNTs act as binders. The unique structure leads to excellent compression resilience, high foldability, and high electronic and ionic conductivity. SCs made with the LPCS electrodes and ionic liquid electrolyte show a high energy density (2.1 mWh cm-2 at 2 mA cm-2 ), low-temperature long lifetime (95% capacity after 10 000 cycles at -30 °C), and excellent low-temperature foldability (86% capacity after 1000 folding cycles at -30 °C).

A Quadruple-Hydrogen-Bonded Supramolecular Binder for High-Performance Silicon Anodes in Lithium-Ion Batteries.

With extremely high specific capacity, silicon has attracted enormous interest as a promising anode material for next-generation lithium-ion batteries. However, silicon suffers from a large volume variation during charge/discharge cycles, which leads to the pulverization of the silicon and subsequent separation from the conductive additives, eventually resulting in rapid capacity fading and poor cycle life. Here, it is shown that the utilization of a self-healable supramolecular polymer, which is facilely synthesized by copolymerization of tert-butyl acrylate and an ureido-pyrimidinone monomer followed by hydrolysis, can greatly reduce the side effects caused by the volume variation of silicon particles. The obtained polymer is demonstrated to have an excellent self-healing ability due to its quadruple-hydrogen-bonding dynamic interaction. An electrode using this self-healing supramolecular polymer as binder exhibits an initial discharge capacity as high as 4194 mAh g-1 and a Coulombic efficiency of 86.4%, and maintains a high capacity of 2638 mAh g-1 after 110 cycles, revealing significant improvement of the electrochemical performance in comparison with that of Si anodes using conventional binders. The supramolecular binder can be further applicable for silicon/carbon anodes and therefore this supramolecular strategy may increase the choice of amendable binders to improve the cycle life and energy density of high-capacity Li-ion batteries.

Self-Healing Gelatin Hydrogels Cross-Linked by Combining Multiple Hydrogen Bonding and Ionic Coordination.

Self-healing hydrogels have been studied by many researchers via multiple cross-linking approaches including physical and chemical interactions. It is an interesting project in multifunctional hydrogel exploration that a water soluble polymer matrix is cross-linked by combining the ionic coordination and the multiple hydrogen bonds to fabricate self-healing hydrogels with injectable property. This study introduces a general procedure of preparing the hydrogels (termed gelatin-UPy-Fe) cross-linked by both ionic coordination of Fe3+ and carboxyl group from the gelatin and the quadruple hydrogen bonding interaction from the ureido-pyrimidinone (UPy) dimers. The gelatin-UPy-Fe hydrogels possess an excellent self-healing property. The effects of the ionic coordination of Fe3+ and quadruple hydrogen bonding of UPy on the formation and mechanical behavior of the prepared hydrogels are investigated. In vitro drug release of the gelatin-UPy-Fe hydrogels is also observed, giving an intriguing glimpse into possible biological applications.

A Review of Emerging Technologies in Ultra-Smooth Surface Processing for Optical Components.

Advancements in astronomical telescopes and cutting-edge technologies, including deep ultraviolet (DUV) and extreme ultraviolet (EUV) lithography, have escalated demands and imposed stringent surface quality requirements on optical system components. Achieving near-ideal optical components requires ultra-smooth surfaces with sub-nanometer roughness, no sub-surface damage, minimal surface defects, low residual stresses, and intact lattice integrity. This necessity has driven the rapid development and diversification of ultra-smooth surface fabrication technologies. This paper summarizes recent advances in ultra-smooth surface processing technologies, categorized by their material removal mechanisms. A subsequent comparative analysis evaluates the roughness and polishing characteristics of ultra-smooth surfaces processed on various materials, including fused silica, monocrystalline silicon, silicon carbide, and sapphire. To maximize each process's advantages and achieve higher-quality surfaces, the paper discusses tailored processing methods and iterations for different materials. Finally, the paper anticipates future development trends in response to current challenges in ultra-smooth surface processing technology, providing a systematic reference for the study of the production of large-sized freeform surfaces.

A logistic-tent chaotic mapping Levenberg Marquardt algorithm for improving positioning accuracy of grinding robot.

The precision of workpiece machining is critically influenced by the geometric errors in the kinematics of grind robots, which directly affect their absolute positioning accuracy. To tackle this challenge, this paper introduces a logistic-tent chaotic mapping Levenberg Marquardt algorithm designed to accurately identify and compensate for this geometric error. the approach begins with the construction of a forward kinematic model and an error model specific to the robot. Then the algorithm is adopted to identify and compensate for the geometric error. The method establishes a mapping interval around the initial candidate solutions derived from iterative applications of the Levenberg Marquardt algorithm. Within this interval, the logistic-tent chaotic mapping method generates a diverse set of candidate solutions. These candidates are evaluated based on their fitness values, with the optimal solution selected for subsequent iterations. Empirical compensation experiments have validated the proposed method's precision and effectiveness, demonstrating a 6% increase in compensation accuracy and a 47.68% improvement in efficiency compared to existing state-of-the-art approaches. This process not only minimizes the truncation error inherent in the Levenberg Marquardt algorithm but also significantly enhances solution efficiency. Moreover, simulation experiments on grind processes further validate the method's ability to significantly improve the quality of workpiece machining.

Ultrathin, Mechanically Robust Quasi-Solid Composite Electrolyte for Solid-State Lithium Metal Batteries.

Herein, we present the preparation and properties of an ultrathin, mechanically robust, quasi-solid composite electrolyte (SEO-QSCE) for solid-state lithium metal battery (SLB) from a well-defined polystyrene-b-poly(ethylene oxide) diblock copolymer (SEO), Li6.75La3Zr1.75Ta0.25O12 nanofiller, and fluoroethylene carbonate plasticizer. Compared with the ordered lamellar microphase separation of SEO, the SEO-QSCE displays bicontinuous phases, consisting of a Li+ ion conductive poly(ethylene oxide) domain and a mechanically robust framework of the polystyrene domain. Therefore, the 12 µm-thick SEO-QSCE membrane exhibits an exceptional ionic conductivity of 1.3 × 10-3 S cm-1 at 30 °C, along with a remarkable tensile strength of 5.1 MPa and an elastic modulus of 2.7 GPa. The high mechanical robustness and the self-generated LiF-rich SEI enable the SEO-QSCE to have an extraordinary lithium dendrite prohibition effect. The SLB of Li|SEO-QSCE|LiFePO4 reveals superior cycling performances at 30 °C for over 600 cycles, maintaining an initial discharge capacity of 145 mAh g-1 and a remarkable capacity retention of 81% (117 mAh g-1) after 400 cycles at 0.5 C. The high-voltage SLB of Li|SEO-QSCE|LiNi0.5Co0.3Mn0.2O2 displays good cycling stability for over 150 cycles at 30 °C. Moreover, the exceptional robustness of SEO-QSCE enables the high-voltage solid-state pouch cell of Li|SEO-QSCE|LiNi0.5Co0.3Mn0.2O2 with high flexibility and excellent safety features. The current investigation delivers a promising and innovative approach for preparing quasi-solid electrolytes with features of ultrathin design, mechanical robustness, and exceptional electrochemical performance for high-voltage SLBs.

Bipolar Textile Composite Electrodes Enabling Flexible Tandem Solid-State Lithium Metal Batteries.

A majority of flexible and wearable electronics require high operational voltage that is conventionally achieved by serial connection of battery unit cells using external wires. However, this inevitably decreases the energy density of the battery module and may cause additional safety hazards. Herein, a bipolar textile composite electrode (BTCE) that enables internal tandem-stacking configuration to yield high-voltage (6 to 12 V class) solid-state lithium metal batteries (SSLMBs) is reported. BTCE is comprised of a nickel-coated poly(ethylene terephthalate) fabric (NiPET) core layer, a cathode coated on one side of the NiPET, and a Li metal anode coated on the other side of the NiPET. Stacking BTCEs with solid-state electrolytes alternatively leads to the extension of output voltage and decreased usage of inert package materials, which in turn significantly boosts the energy density of the battery. More importantly, the BTCE-based SSLMB possesses remarkable capacity retention per cycle of over 99.98% over cycling. The composite structure of BTCE also enables outstanding flexibility; the battery keeps stable charge/discharge characteristics over thousands of bending and folding. BTCE shows great promise for future safe, high-energy-density, and flexible SSLMBs for a wide range of flexible and wearable electronics.

Restructuring Electrolyte Solvation by a Versatile Diluent Toward Beyond 99.9% Coulombic Efficiency of Sodium Plating/Stripping at Ultralow Temperatures.

The reversible and durable operation of sodium metal batteries at low temperatures (LT) is essential for cold-climate applications but is plagued by dendritic Na plating and unstable solid-electrolyte interphase (SEI). Current Coulombic efficiencies of sodium plating/stripping at LT fall far below 99.9%, representing a significant performance gap yet to be filled. Here, the solvation structure of the conventional 1 m NaPF6 in diglyme electrolyte by facile cyclic ether (1,3-dioxolane, DOL) dilution is efficiently reconfigured. DOL diluents help shield the Na+-PF6 - Coulombic interaction and intermolecular forces of diglyme, leading to anomalously high Na+-ion conductivity. Besides, DOL participates in the solvation sheath and weakens the chelation of Na+ by diglyme for facilitated desolvation. More importantly, it promotes concentrated electron cloud distribution around PF6 - in the solvates and promotes their preferential decomposition. A desired inorganic-rich SEI is generated with compositional uniformity, high ionic conductivity, and high Young's modulus. Consequently, a record-high Coulombic efficiency over 99.9% is achieved at an ultralow temperature of -55 °C, and a 1 Ah capacity pouch cell of initial anode-free sodium metal battery retains 95% of the first discharge capacity over 100 cycles at -25 °C. This study thus provides new insights for formulating electrolytes toward increased Na reversibility at LT.

Beyond LiF: Tailoring Li2O-Dominated Solid Electrolyte Interphase for Stable Lithium Metal Batteries.

The components and structures of the solid-electrolyte interphase (SEI) are critical for stable cycling of lithium metal batteries (LMBs). LiF has been widely studied as the dominant component of SEI, but Li2O, which has a much lower diffusion barrier for Li+, has rarely been investigated as the dominant component of SEI. The effect of Li2O-dominated SEI on electrochemical performance still remains elusive. Herein, an ultrastrong coordinated cosolvation diluent, 2,3-difluoroethoxybenzene (DFEB), is designed to modulate solvation structure and tailor Li2O-dominated SEI for stable LMBs. In the DFEB-based LHCE (DFEB-LHCE), DFEB intensively participates in the first solvation shell and synergizes with FSI- to tailor an Li2O-dominated inorganic-rich SEI which is different from the LiF-dominated SEI formed in conventional LHCE. Benefiting from this special SEI architecture, a high Coulombic efficiency (CE) of 99.58% in Li||Cu half cells, stable voltage profiles, and dense and uniform lithium deposition, as well as effective inhibition of Li dendrite formation in the symmetrical cell, are achieved. More importantly, the DFEB-LHCE can be matched with various cathodes such as LFP, NCM811, and S cathodes, and the Li||LFP full cell using DFEB-LHCE possesses 85% capacity retention after 650 stable cycles with 99.9% CE. Especially the 1.5 Ah practical lithium metal pouch cell achieves an excellent capacity retention of 89% after 250 cycles with a superb average CE of 99.93%. This work unravels the superiority of the Li2O-dominated SEI and the feasibility of tailoring SEI components through modulation of solvation structures.

Extreme Fast Charging of Lithium Metal Batteries Enabled by a Molten-Salt-Derived Nanocrystal Interphase.

The extreme fast charging performance of lithium metal batteries (LMBs) with a long life is an important focus in the development of next-generation battery technologies. The friable solid electrolyte interphase and dendritic lithium growth are major problems. The formation of an inorganic nanocrystal-dominant interphase produced by preimmersing the Li in molten lithium bis(fluorosulfonyl)imide that suppresses the overgrowth of the usual interphase is reported. Its high surface modulus combined with fast Li+ diffusivity enables a reversible dendrite-proof deposition under ultrahigh-rate conditions. It gives a record-breaking cumulative plating/stripping capacity of >240 000 mAh cm-2 at 30 mA cm-2@30 mAh cm-2 for a symmetric cell and an extreme fast charging performance at 6 C for 500 cycles for a Li||LiCoO2 full cell with a high-areal-capacity, thus expanding the use of LMBs to high-loading and power-intensive scenarios. Its usability both in roll-to-roll production and in different electrolytes indicating the scalable and industrial potential of this process for high-performance LMBs.

Insight into Multiple Intermolecular Coordination of Composite Solid Electrolytes via Cryo-Electron Microscopy for High-Voltage All-Solid-State Lithium Metal Batteries.

Polymer/ceramic-based composite solid electrolytes (CSE) are promising candidates for all-solid-state lithium metal batteries (SLBs), benefiting from the combined mechanical robustness of polymeric electrolytes and the high ionic conductivity of ceramic electrolytes. However, the interfacial instability and poorly understood interphases of CSE hinder their application in high-voltage SLBs. Herein, a simple but effective CSE that stabilizes high-voltage SLBs by forming multiple intermolecular coordination interactions between polyester and ceramic electrolytes is discovered. The multiple coordination between the carbonyl groups in poly(ε-caprolactone) and the fluorosulfonyl groups in anions with Li6.5La3Zr1.5Ta0.5O12 nanoparticles is directly visualized by cryogenic transmission electron microscopy and further confirmed by theoretical calculation. Importantly, the multiple coordination in CSE not only prevents the continuous decomposition of polymer skeleton by shielding the vulnerable carbonyl sites but also establishes stable inorganic-rich interphases through preferential decomposition of anions. The stable CSE and its inorganic-rich interphases enable Li||Li symmetric cells with an exceptional lifespan of over 4800 h without dendritic shorting at 0.1 mA cm-2. Moreover, the high-voltage SLB with LiNi0.5Co0.2Mn0.3O2 cathode displays excellent cycling stability over 1100 cycles at a 1C charge/discharge rate. This work reveals the underlying mechanism behind the excellent stability of coordinating composite electrolytes and interfaces in high-voltage SLBs.

Polymer-in-Salt Electrolyte from Poly(caprolactone)-graft-polyrotaxane for Ni-Rich Lithium Metal Batteries at Room Temperature.

Solid-state lithium batteries with solid polymer electrolytes have recently attracted extensive attention due to their promising potential in high energy density and safety. However, the principal issues plaguing the solid polymer electrolytes are their restricted ionic conductivities at ambient temperature and the limited tolerance to the widely used high-voltage cathodes (such as LiNi0.8Mn0.1Co0.1O2, NCM811), thus limiting their practical applications seriously. In this regard, a superior polymer-in-salt solid electrolyte from poly(caprolactone)-graft-polyrotaxane (PGPE) is developed for high-voltage lithium batteries operated at room temperature. The PGPE displays remarkable electrochemical properties at room temperature, with an exceptional ionic conductivity of 4.89 × 10-4 S cm-1 and a lithium-ion transference number of approximately 0.64, stemming from the rapid segmental motions of PCL sidechains by the enhanced dynamics of the cyclic molecules along the axial polymer chain of polyrotaxane. More importantly, the PGPE demonstrates a high electrochemical oxidation voltage of ∼4.7 V, suggesting the excellent electrochemical stability of PGPE against the NCM811-based cathode. Owing to the dense LiF-rich CEI self-generated on the NCM811 particles in the cathode, the transition metal ion diffusion is successfully constrained and the PGPE is well protected from continuous decomposition. The PGPE also shows superior interfacial stability between the metallic Li and the electrolyte. As a result, the all-solid-state NCM811|PGPE|Li cell exhibits superior discharge capacity (196 mAh g-1) and extraordinary long-term cycling stability (74% capacity retention at 150 cycles) at 30 °C.

Fundamentals of the Cathode-Electrolyte Interface in All-solid-state Lithium Batteries.

All-solid-state lithium batteries (ASSBs) enabled by solid-state electrolytes (SEs) including oxide-based and sulfide-based electrolytes have gained worldwide attention because of their intrinsic safety and higher energy density over conventional lithium-ion batteries (LIBs). However, despite the high ionic conductivity of advanced SEs, ASSBs still exhibit high overall internal resistance, the most significant contributor of which can be ascribed to the cathode-SE interfaces. This review seeks to clarify the critical issues regarding the cathode-SE interfaces, including fundamental principles and corresponding solutions. First, major issues concerning electro-chemo-mechanical instability between cathodes and SEs and their formation mechanisms are discussed. Then, specific problems in oxides and sulfides and various solutions and strategies toward interfacial modifications are highlighted. Efforts toward the characterization and analysis of cathode-SE interfaces with advanced techniques are also summarized. Finally, perspectives are offered on several problems demanding urgent solutions and the future development of SE applications and ASSBs.