RESUMO
A suspension of nanoparticles with very low volume fraction is found to assemble into a macroscopic cellular phase that is composed of particle-rich walls and particle-free voids under the collective influence of AC and DC voltages. Systematic study of this phase transition shows that it was the result of electrophoretic assembly into a two-dimensional configuration followed by spinodal decomposition into particle-rich walls and particle-poor cells mediated principally by electrohydrodynamic flow. This mechanistic understanding reveals two characteristics needed for a cellular phase to form, namely (1) a system that is considered two dimensional and (2) short-range attractive, long-range repulsive interparticle interactions. In addition to determining the mechanism underpinning the formation of the cellular phase, this work presents a method to reversibly assemble microscale continuous structures out of nanoscale particles in a manner that may enable the creation of materials that impact diverse fields including energy storage and filtration.
Assuntos
Eletricidade , Nanopartículas , Eletroforese , Transição de Fase , SuspensõesRESUMO
This report of the reddest emitting indium phosphide quantum dots (InP QDs) to date demonstrates tunable, near-infrared (NIR) photoluminescence (PL) as well as PL multiplexing in the first optical tissue window while avoiding toxic constituents. This synthesis overcomes the InP "growth bottleneck" and extends the emission peak of InP QDs deeper into the first optical tissue window using an inverted QD heterostructure, specifically ZnSe/InP/ZnS core/shell/shell nanoparticles. The QDs exhibit InP shell thickness-dependent tunable emission with peaks ranging from 515-845 nm. The high absorptivity of InP yields effective photoexcitation of the QDs with UV, visible, and NIR wavelengths. These nanoparticles extend the range of tunable direct-bandgap emission from InP-based nanostructures, effectively overcoming a synthetic barrier that has prevented InP-based QDs from reaching their full potential as NIR imaging agents. Multiplexed lymph node imaging in a mouse model demonstrates the potential of the NIR-emitting InP particles for in vivo imaging.
Assuntos
Fosfinas , Pontos Quânticos , Animais , Índio , Camundongos , Compostos de ZincoRESUMO
Semiconductor quantum dots (QDs) are attractive fluorescent contrast agents for in vivo imaging due to their superior photophysical properties, but traditional QDs comprise toxic materials such as cadmium or lead. Copper indium sulfide (CuInS2, CIS) QDs have been posited as a nontoxic and potentially clinically translatable alternative; however, previous in vivo studies utilized particles with a passivating zinc sulfide (ZnS) shell, limiting direct evidence of the biocompatibility of the underlying CIS. For the first time, we assess the biodistribution and toxicity of unshelled CIS and partially zinc-alloyed CISZ QDs in a murine model. We show that bare CIS QDs breakdown quickly, inducing significant toxicity as seen in organ weight, blood chemistry, and histology. CISZ demonstrates significant, but lower, toxicity compared to bare CIS, while our measurements of core/shell CIS/ZnS are consistent with literature reports of general biocompatibility. In vitro cytotoxicity is dose-dependent on the amount of metal released due to particle degradation, linking degradation to toxicity. These results challenge the assumption that removing heavy metals necessarily reduces toxicity: indeed, we find comparable in vitro cytotoxicity between CIS and CdSe QDs, while CIS caused severe toxicity in vivo compared to CdSe. In addition to highlighting the complexity of nanotoxicity and the differences between the in vitro and in vivo outcomes, these unexpected results serve as a reminder of the importance of assessing the biocompatibility of core QDs absent the protective ZnS shell when making specific claims of compositional biocompatibility.
Assuntos
Cobre , Citotoxinas , Índio , Pontos Quânticos , Sulfetos , Animais , Cobre/química , Cobre/farmacocinética , Cobre/farmacologia , Citotoxinas/química , Citotoxinas/farmacocinética , Citotoxinas/farmacologia , Relação Dose-Resposta a Droga , Feminino , Células Hep G2 , Humanos , Índio/química , Índio/farmacocinética , Índio/farmacologia , Camundongos , Camundongos Endogâmicos BALB C , Pontos Quânticos/química , Pontos Quânticos/uso terapêutico , Sulfetos/química , Sulfetos/farmacocinética , Sulfetos/farmacologiaRESUMO
A recent description of an antibody-free assay is significantly extended for small molecule analytes using allosteric transcription factors (aTFs) and Förster resonance energy transfer (FRET). The FRET signal indicates the differential binding of an aTF-DNA pair with a dose-dependent response to its effector molecule, i.e., the analyte. The new sensors described here, based on the well-characterized aTF TetR, demonstrate several new features of the assay approach: 1) the generalizability of the sensors to additional aTF-DNA-analyte systems, 2) sensitivity modulation through the choice of donor fluorophore (quantum dots or fluorescent proteins, FPs), and 3) sensor tuning using aTF variants with differing aTF-DNA binding affinities. While all of these modular sensors self-assemble, the design reported here based on a recombinant aTF-FP chimera with commercially available dye-labeled DNA uses readily accessible sensor components to facilitate easy adoption of the sensing approach by the broader community.
Assuntos
Técnicas Biossensoriais , DNA , Transferência Ressonante de Energia de Fluorescência , Fatores de Transcrição , Técnicas Biossensoriais/instrumentação , DNA/metabolismo , Corantes Fluorescentes , Pontos Quânticos , Fatores de Transcrição/metabolismoRESUMO
In this work, quantum dots (QDs) of various heterostructured compositions and shell thicknesses are used as Förster or fluorescence resonance energy transfer (FRET) donors and acceptors to optimize QD-QD FRET sensing through materials design. While several reports have highlighted the advantages of using QD-dye, rather than dye-dye, FRET in sensing applications, QD-QD FRET has lagged behind in development as a result of high background signal from direct acceptor excitation. However, in designing sensors for longitudinal studies, QD-dye sensors are limited by the photostability of the fluorescent dye. While fluorescence generally affords higher sensitivity than absorbance-based readouts, the instrumentation needed for detecting fluorescence can be expensive, motivating the development of sensors bright enough to be seen by eye or imaged with cheap consumer electronics. Harnessing the exceptional brightness of QDs, our study focuses on the development of QD-QD FRET pairs where color change is achieved for visual readout and instrument-free sensing. We demonstrate that bulk semiconductor material characteristics can be used to a priori predict and tailor the behavior of QD-QD FRET systems, and our findings show that it is possible to create QD donors that are brighter than their acceptors through concerted compositional and morphological choices in heterostructured QDs. This is significant for developing visual sensors, as we show that the most profound color change occurs when the direct acceptor emission is lower than that of the donor. Finally, the use of an optimal cadmium-free QD-QD FRET pair is presented in a pH sensor that shows a large range of pH-dependent color change with bright, instrument-free readout.
RESUMO
Using a novel method developed to quantify the polarizability of photoluminescent nanoparticles in water, we present experimental observations of the extraordinary polarizability exhibited by nanoparticles of commensurate size with the Debye screening length, confirming previously reported theory. Semiconductor quantum dots (QDs) are ideal model nanoparticles to demonstrate this assay, due to their tunable size and bright photoluminescence. This assay is based upon microfluidic chambers with microelectrodes that generate trapping potentials that are weaker than thermal energy. By comparing the local electric field strength and variations in QD concentration, their polarizability was computed and found to agree with estimates based upon the hydrodynamic diameter found using light scattering. Strikingly, the polarizability of the nanoparticles increased 30-fold in low salt conditions compared to high salt conditions due to the increased thickness of the Debye layer relative to the particle radius. In addition to providing evidence that corroborates theoretical work studying direct solutions to the Poisson-Nernst-Planck equations, these observations provide an explanation for the previously observed conductivity dependence of biomolecule polarizability. As the polarizability of nanoparticles is of high importance to the electrically directed assembly of particles, as well as their interactions with other materials in complex environments, we anticipate that these results will be highly relevant to ongoing efforts in materials by design and nanomedicine.
Assuntos
Pontos Quânticos/química , Condutividade Elétrica , Eletricidade , Microscopia de Fluorescência/métodos , Tamanho da Partícula , Pontos Quânticos/ultraestrutura , Eletricidade EstáticaRESUMO
Recently, allosteric transcription factors (TFs) were identified as a novel class of biorecognition elements for in vitro sensing, whereby an indicator of the differential binding affinity between a TF and its cognate DNA exhibits dose-dependent responsivity to an analyte. Described is a modular bead-based biosensor design that can be applied to such TF-DNA-analyte systems. DNA-functionalized beads enable efficient mixing and spatial separation, while TF-labeled semiconductor quantum dots serve as bright fluorescent indicators of the TF-DNA bound (on bead) and unbound states. The prototype sensor for derivatives of the antibiotic tetracycline exhibits nanomolar sensitivity with visual detection of bead fluorescence. Facile changes to the sensor enable sensor response tuning without necessitating changes to the biomolecular affinities. Assay components self-assemble, and readout by eye or digital camera is possible within 5â minutes of analyte addition, making sensor use facile, rapid, and instrument-free.
Assuntos
Antibacterianos/análise , Técnicas Biossensoriais , Telefone Celular , Corantes Fluorescentes/química , Tetraciclina/análise , Fatores de Transcrição/química , DNA/química , Pontos Quânticos/química , SemicondutoresRESUMO
Dip-pen nanolithography (DPN) is used to precisely position core/thick-shell ("giant") quantum dots (gQDs; ≥10 nm in diameter) exclusively on top of silicon nanodisk antennas (≈500 nm diameter pillars with a height of ≈200 nm), resulting in periodic arrays of hybrid nanostructures and demonstrating a facile integration strategy toward next-generation quantum light sources. A three-step reading-inking-writing approach is employed, where atomic force microscopy (AFM) images of the pre-patterned substrate topography are used as maps to direct accurate placement of nanocrystals. The DPN "ink" comprises gQDs suspended in a non-aqueous carrier solvent, o-dichlorobenzene. Systematic analyses of factors influencing deposition rate for this non-conventional DPN ink are described for flat substrates and used to establish the conditions required to achieve small (sub-500 nm) feature sizes, namely: dwell time, ink-substrate contact angle and ink volume. Finally, it is shown that the rate of solvent transport controls the feature size in which gQDs are found on the substrate, but also that the number and consistency of nanocrystals deposited depends on the stability of the gQD suspension. Overall, the results lay the groundwork for expanded use of nanocrystal liquid inks and DPN for fabrication of multi-component nanostructures that are challenging to create using traditional lithographic techniques.
RESUMO
BACKGROUND: When evaluating the toxicity of engineered nanomaterials (ENMS) it is important to use multiple bioassays based on different mechanisms of action. In this regard we evaluated the use of gene expression and common cytotoxicity measurements using as test materials, two selected nanoparticles with known differences in toxicity, 5 nm mercaptoundecanoic acid (MUA)-capped InP and CdSe quantum dots (QDs). We tested the effects of these QDs at concentrations ranging from 0.5 to 160 µg/mL on cultured normal human bronchial epithelial (NHBE) cells using four common cytotoxicity assays: the dichlorofluorescein assay for reactive oxygen species (ROS), the lactate dehydrogenase assay for membrane viability (LDH), the mitochondrial dehydrogenase assay for mitochondrial function, and the Comet assay for DNA strand breaks. RESULTS: The cytotoxicity assays showed similar trends when exposed to nanoparticles for 24 h at 80 µg/mL with a threefold increase in ROS with exposure to CdSe QDs compared to an insignificant change in ROS levels after exposure to InP QDs, a twofold increase in the LDH necrosis assay in NHBE cells with exposure to CdSe QDs compared to a 50% decrease for InP QDs, a 60% decrease in the mitochondrial function assay upon exposure to CdSe QDs compared to a minimal increase in the case of InP and significant DNA strand breaks after exposure to CdSe QDs compared to no significant DNA strand breaks with InP. High-throughput quantitative real-time polymerase chain reaction (qRT-PCR) data for cells exposed for 6 h at a concentration of 80 µg/mL were consistent with the cytotoxicity assays showing major differences in DNA damage, DNA repair and mitochondrial function gene regulatory responses to the CdSe and InP QDs. The BRCA2, CYP1A1, CYP1B1, CDK1, SFN and VEGFA genes were observed to be upregulated specifically from increased CdSe exposure and suggests their possible utility as biomarkers for toxicity. CONCLUSIONS: This study can serve as a model for comparing traditional cytotoxicity assays and gene expression measurements and to determine candidate biomarkers for assessing the biocompatibility of ENMs.
Assuntos
Bioensaio , Compostos de Cádmio/toxicidade , Células Epiteliais/efeitos dos fármacos , Ácidos Graxos/toxicidade , Nanopartículas/toxicidade , Pontos Quânticos/toxicidade , Compostos de Selênio/toxicidade , Compostos de Sulfidrila/toxicidade , Proteína BRCA2/genética , Proteína BRCA2/metabolismo , Biomarcadores/metabolismo , Brônquios/citologia , Brônquios/efeitos dos fármacos , Brônquios/metabolismo , Linhagem Celular , Membrana Celular/química , Membrana Celular/efeitos dos fármacos , Membrana Celular/metabolismo , Ensaio Cometa , Sistema Enzimático do Citocromo P-450/genética , Sistema Enzimático do Citocromo P-450/metabolismo , Células Epiteliais/citologia , Células Epiteliais/metabolismo , Fluoresceínas/química , Corantes Fluorescentes/química , Expressão Gênica/efeitos dos fármacos , Humanos , L-Lactato Desidrogenase/genética , L-Lactato Desidrogenase/metabolismo , Mitocôndrias/efeitos dos fármacos , Mitocôndrias/metabolismo , Proteínas Mitocondriais/genética , Proteínas Mitocondriais/metabolismo , Desnaturação de Ácido Nucleico/efeitos dos fármacos , Oxirredutases/genética , Oxirredutases/metabolismo , Espécies Reativas de Oxigênio/agonistas , Espécies Reativas de Oxigênio/metabolismo , Fator A de Crescimento do Endotélio Vascular/genética , Fator A de Crescimento do Endotélio Vascular/metabolismoRESUMO
Förster (or fluorescence) resonance energy transfer amongst semiconductor quantum dots (QDs) is reviewed, with particular interest in biosensing applications. The unique optical properties of QDs provide certain advantages and also specific challenges with regards to sensor design, compared to other FRET systems. The brightness and photostability of QDs make them attractive for highly sensitive sensing and long-term, repetitive imaging applications, respectively, but the overlapping donor and acceptor excitation signals that arise when QDs serve as both the donor and acceptor lead to high background signals from direct excitation of the acceptor. The fundamentals of FRET within a nominally homogeneous QD population as well as energy transfer between two distinct colors of QDs are discussed. Examples of successful sensors are highlighted, as is cascading FRET, which can be used for solar harvesting.
Assuntos
Transferência Ressonante de Energia de Fluorescência , Pontos Quânticos , Semicondutores , Técnicas Biossensoriais , Nanopartículas , Propriedades de SuperfícieRESUMO
Performing time-tagged, time-correlated, single-photon-counting studies on individual colloidal nanocrystal quantum dots (NQDs), the evolution of photoluminescence (PL) intensity-fluctuation behaviors in near-infrared (NIR) emitting type II, InP/CdS core-shell NQDs is investigated as a function of shell thickness. It is observed that Auger recombination and hot-carrier trapping compete in defining the PL intensity-fluctuation behavior for NQDs with thin shells, whereas the role of hot-carrier trapping dominates for NQDs with thick shells. These studies further reveal the distinct ramifications of altering either the excitation fluence or repetition rate. Specifically, an increase in laser pump fluence results in the creation of additional hot-carrier traps. Alternately, higher repetition rates cause a saturation in hot-carrier traps, thus activating Auger-related PL fluctuations. Furthermore, it is shown that Auger recombination of negatively charged excitons is suppressed more strongly than that of positively charged excitons because of the asymmetry in the electron-hole confinement in type II NQDs. Thus, this study provides new understanding of how both NQD structure (shell thickness and carrier-separation characteristics) and excitation conditions can be used to tune the PL stability, with important implications for room-temperature single-photon generation. Specifically, the first non-blinking NQD capable of single-photon emission in the near-infrared spectral regime is described.
Assuntos
Nanopartículas Metálicas/química , Pontos Quânticos/química , Compostos de Cádmio , Índio , Lasers Semicondutores , Luminescência , Nanopartículas Metálicas/classificação , Nanopartículas Metálicas/ultraestrutura , Nanotecnologia , Tamanho da Partícula , Fosfinas , Fótons , Pontos Quânticos/ultraestrutura , Compostos de Selênio , Sulfetos , TemperaturaRESUMO
While multiplexed fluorescence imaging is frequently used for in vitro microscopy, extending the technique to whole animal imaging in vivo has remained challenging due to the attenuation and scattering of visible and traditional near infrared (NIR-I) wavelengths. Fluorescence imaging using short-wave infrared (SWIR, 1000 - 1700 nm, a.k.a. NIR-II) light enables deeper tissue penetration for preclinical imaging compared to previous methods due to reduced tissue scattering and minimal background autofluorescence in this optical window. Combining NIR-I excitation wavelengths with multiple distinct SWIR emission peaks presents a tremendous opportunity to distinguish multiple fluorophores with high precision for non-invasive, multiplexed anatomical imaging in small animal models. SWIR-emitting semiconductor quantum dots (QDs) with tunable emission peaks and optical stability have emerged as powerful contrast agents, but SWIR imaging demonstrations have yet to move beyond two-color imaging schemes. In this study, we engineered a set of three high quantum yield lead sulfide/cadmium sulfide (PbS/CdS) core/shell QDs with distinct SWIR emissions ranging from 1100 - 1550 nm and utilize these for simultaneous three-color imaging in mice. We first use QDs to non-invasively track lymphatic drainage, highlighting the detailed network of lymphatic vessels with high-resolution with a widefield imaging over a 2 hr period. We then perform multiplexed imaging with all three QDs to distinctly visualize the lymphatic system and spatially overlapping vasculature network. This work establishes optimized SWIR QDs for next-generation multiplexed preclinical imaging, moving beyond the capability of previous dual-labeling techniques. The capacity to discriminate several fluorescent labels through non-invasive NIR-I excitation and SWIR detection unlocks numerous opportunities for studies of disease progression, drug biodistribution, and cell trafficking dynamics in living organisms.
RESUMO
Hybrid nanomaterials containing both noble metal and semiconductor building blocks provide an engineerable platform for realizing direct or indirect charge and energy transfer for enhanced plasmonic photoconversion and photocatalysis. In this work, silver nanoparticles (AgNPs) and chalcopyrite (CuFeS2) nanocrystals (NCs) are combined into a AgNP@CuFeS2 hybrid structure comprising NCs embedded in a self-assembled lipid coating around the AgNP core. In AgNP@CuFeS2 hybrid structures, both metallic and semiconductor NCs support quasistatic resonances. To characterize the interactions between these resonances and their effect on potential charge and energy transfer, direct interfacial excitation transfer between the AgNP core and surrounding CuFeS2 NCs is probed through single particle line shape analysis and supporting electromagnetic simulations. These studies reveal that CuFeS2 NCs localized in the evanescent field of the central AgNP induce a broadening of the metal NP line shape that peaks when an energetic match between the AgNP and CuFeS2 NC resonances maximizes direct energy transfer. Dimers of AgNPs whose resonances exhibit poor energetic overlap with the CuFeS2 NC quasistatic resonance yield much weaker line shape broadening in a control experiment, corroborating the existence of resonant energy transfer in the AgNP@CuFeS2 hybrid. Resonant coupling between the metallic and semiconductor building blocks in the investigated hybrid architecture provides a mechanism for utilizing the large optical cross-section of the central AgNP to enhance the generation of reactive charge carriers in the surrounding semiconductor NCs for potential applications in photocatalysis.
RESUMO
A new class of nanocrystal quantum dot (NQD), the "giant" NQD (g-NQD), was investigated for its potential to address outstanding issues associated with the use of NQDs as down-conversion phosphors in light-emitting devices, namely, insufficient chemical/photostability and extensive self-reabsorption when packed in high densities or in thick films. Here, we demonstrate that g-NQDs afford significantly enhanced operational stability compared to their conventional NQD counterparts and minimal self-reabsorption losses. The latter results from a characteristic large Stokes shift (>100 nm; >0.39 eV), which itself is a manifestation of the internal structure of these uniquely thick-shelled NQDs. In carefully prepared g-NQDs, light absorption occurs predominantly in the shell but emission occurs exclusively from the core. We directly compare for the first time the processes of shellâcore energy relaxation and coreâcore energy transfer by evaluating CdSâCdSe down-conversion of blueâred light in g-NQDs and in a comparable mixed-NQD (CdSe and CdS) thin film, revealing that the internal energy relaxation process affords a more efficient and color-pure conversion of blue to red light compared to energy transfer. Lastly, we demonstrate the facile fabrication of white-light devices with correlated color temperature tuned from â¼3200 to 5800 K.
Assuntos
Nanoestruturas/química , Nanoestruturas/ultraestrutura , Pontos Quânticos , Transferência de Energia , Teste de Materiais , Tamanho da PartículaRESUMO
Nonblinking excitonic emission from near-infrared and type-II nanocrystal quantum dots (NQDs) is reported for the first time. To realize this unusual degree of stability at the single-dot level, novel InP/CdS core/shell NQDs were synthesized for a range of shell thicknesses (~1-11 monolayers of CdS). Ensemble spectroscopy measurements (photoluminescence peak position and radiative lifetimes) and electronic structure calculations established the transition from type-I to type-II band alignment in these heterostructured NQDs. More significantly, single-NQD studies revealed clear evidence for blinking suppression that was not strongly shell-thickness dependent, while photobleaching and biexciton lifetimes trended explicitly with extent of shelling. Specifically, very long biexciton lifetimes-up to >7 ns-were obtained for the thickest-shell structures, indicating dramatic suppression of nonradiative Auger recombination. This new system demonstrates that electronic structure and shell thickness can be employed together to effect control over key single-dot and ensemble NQD photophysical properties.
Assuntos
Pontos Quânticos , Espectroscopia de Luz Próxima ao Infravermelho/métodos , Compostos de Cádmio/química , Eletrônica , Elétrons , Índio/química , Microscopia Eletrônica de Transmissão/métodos , Nanopartículas , Nanotecnologia/métodos , Paládio/química , Tamanho da Partícula , Fosfatos/química , Fotoquímica/métodos , Espectrometria de Fluorescência/métodos , Sulfetos/química , Temperatura , Fatores de TempoRESUMO
Significance: Preclinical fluorescence imaging with NIR-I (700 to 900 nm) illumination and short-wave infrared or NIR-II (1000 to 1700 nm) emission increases tissue penetration depth and improves resolution through decreased scattering. Background autofluorescence decreases signal-to-background ratios (SBR) in fluorescence imaging; maximizing SBR will further improve the impact of deep tissue imaging. Aim: The impact of rodent diet, illumination wavelength, and emission range on the background fluorescence and contrast agent SBR were determined to assist with the experimental design of future imaging studies. Approach: Following illumination with 670, 760, or 808 nm, autofluorescence in the NIR-I ( < 975 nm ), NIR-II ( > 1000 nm ), and NIR-II LP ( > 1250 nm ) regions was assessed in mice fed chow or a purified diet using an IR VIVO preclinical imager (Photon, Etc.). Comparison of the SBR of liver-localized indocyanine green in the various imaging conditions indicated when gut autofluorescence was a problematic confounder. Results: Mice fed chow exhibit high levels of background autofluorescence in the gastrointestinal tract and, to a lesser extent, skin when illuminated with 670 nm light for NIR-I imaging (700 to 975 nm), interfering with the identification of fluorescently labeled tissue. Background autofluorescence was reduced by more than two orders of magnitude by any of the following changes: (1) purified diet; (2) excitation with 760 or 808 nm illumination; or (3) emission in the NIR-II (1000 to 1600 or 1250 to 1600 nm). Although the SBR was generally sufficient for feature identification except when imaging of chow-fed mice with 670 nm excitation and NIR-I emission, switching to a purified diet, using longer excitation wavelengths, or using longer emission wavelengths improved SBR significantly. Conclusions: Systematic comparison of imaging conditions and diet highlights the reduction in autofluorescence and increase in SBR enabled by intentional choices in the experimental parameters including diet, excitation wavelength, and emission wavelength range.
Assuntos
Dieta , Imagem Óptica , Animais , Camundongos , Imagem Óptica/métodosRESUMO
Excited, or "hot" charge carrier generation and transfer driven by the decay of localized surface plasmon resonances (LSPRs) are key steps in plasmonic photocatalysis. Hybrid structures that contain both metal and semiconductor building blocks facilitate the extraction of reactive charge carriers and their utilization for photoelectrocatalysis. Additional functionality arises from hybrid structures that combine noble metal nanostructures with semiconductor components, such as chalcopyrite (CuFeS2) nanocrystals (NCs), which by themselves support quasistatic resonances. In this work, we use a hybrid membrane to integrate Au nanorods (NRs) with a longitudinal LSPR at 745 nm and CuFeS2 NCs with a resonance peak at 490 nm into water-stable nanocomposites for robust and bifunctional photocatalysis of oxygen and hydrogen evolution reactions in a wavelength-dependent manner. Excitation of NRs or NCs in the nanocomposite correlates with increased hydrogen or oxygen evolution, respectively, consistent with a light-driven electron transfer between the metal and semiconductor building blocks, the direction of which depends on the wavelength. The bifunctional photoreactivity of the nanocomposite is enhanced by Cu(I)/Cu(II)-assisted catalysis on the surface of the NCs.
RESUMO
The impact of a magneto-structural phase transition on the carrier effective mass in Cu5FeS4 plasmonic semiconductor nanocrystals was examined using Magnetic Circular Dichroism (MCD). Through MCD, the sample was confirmed as p-type from variable temperature studies from 1.8 - 75 K. Magnetic field dependent behavior is observed, showing an asymptotic behavior at high field with an m∗ value 5.98 m∗∕me at 10 T and 2.73 m∗∕me at 2 T. Experimentally obtained results are holistically compared to SQUID magnetization data and DFT results, highlighting a dependency on vacancy driven polaronic coupling, magnetocrystalline anisotropy, and plasmon coupling of the magnetic field all contributing to an overall decrease in the hole mean free path dependent on the magnetic field applied to Cu5FeS4.
RESUMO
Förster resonance energy transfer (FRET) is a widely used and ideal transduction modality for fluorescent based biosensors as it offers high signal to noise with a visibly detectable signal. While intense efforts are ongoing to improve the limit of detection and dynamic range of biosensors based on biomolecule optimization, the selection of and relative location of the dye remains understudied. Herein, we describe a combined experimental and computational study to systematically compare the nature of the dye, i.e., organic fluorophore (Cy5 or Texas Red) vs. inorganic nanoparticle (QD), and the position of the FRET donor or acceptor on the biomolecular components. Using a recently discovered transcription factor (TF)-deoxyribonucleic acid (DNA) biosensor for progesterone, we examine four different biosensor configurations and report the quantum yield, lifetime, FRET efficiency, IC50, and limit of detection. Fitting the computational models to the empirical data identifies key molecular parameters driving sensor performance in each biosensor configuration. Finally, we provide a set of design parameters to enable one to select the fluorophore system for future intermolecular biosensors using FRET-based conformational regulation in in vitro assays and new diagnostic devices.
RESUMO
The size-dependent optoelectronic properties of semiconductor nanocrystals quantum dots (QDs) are hugely beneficial for color tunability but induce an inherent relative PL brightness mismatch in QDs emitting different colors, as larger emitters absorb more incident photons than smaller particles. Here, we examine the effect of core composition, shell composition, and shell thickness on optical properties including high energy absorption, quantum yield (QY), and the relative brightness of InP/ZnS and InP/ZnSe core/shell and InP/ZnSe/ZnS core/shell/shell QDs at different excitation wavelengths. Our analysis reveals that the presence of an intermediate ZnSe shell changes the wavelength of enhanced absorption onset and leads to highly excitation wavelength dependent QYs. Switching from commercial CdSe/ZnS to InP/ZnS reduces the brightness-mismatch between green and red emitters from 33- to 5-fold. Incorporating a 4-monolayer thick optically absorbing ZnSe shell into the QD heterostructure and heating the QDs in a solution of zinc oleate and trioctylphosphine produces InP/ZnSe/ZnS QDs that are ~10-fold brighter than their InP/ZnS counterparts. In contrast to CdSe/CdS/ZnS core/shell/shell QDs, which only photoluminesce at red wavelengths with thicker CdS shells due to their Quasi-Type II bandstructure, Type I InP/ZnSe/ZnS QDs are uniquely suited to creating a rainbow of visible-emitting, brightness matched emitters. By tailoring the thickness of the intermediate ZnSe shell, heavy metal-free, brightness-matched green and red emitters are produced. This study highlights the ability to overcome the inherent brightness mismatch seen in QDs through concerted materials design of heterostructured core/shell InP-based QDs.