Claudin-2 and claudin-12 form independent, complementary pores required to maintain calcium homeostasis.

Calcium (Ca2+) homeostasis is maintained through coordination between intestinal absorption, renal reabsorption, and bone remodeling. Intestinal and renal (re)absorption occurs via transcellular and paracellular pathways. The latter contributes the bulk of (re)absorption under conditions of adequate intake. Epithelial paracellular permeability is conferred by tight-junction proteins called claudins. However, the molecular identity of the paracellular Ca2+ pore remains to be delineated. Claudins (Cldn)-2 and -12 confer Ca2+ permeability, but deletion of either claudin does not result in a negative Ca2+ balance or increased calciotropic hormone levels, suggesting the existence of additional transport pathways or parallel roles for the two claudins. To test this, we generated a Cldn2/12 double knockout mouse (DKO). These animals have reduced intestinal Ca2+ absorption. Colonic Ca2+ permeability is also reduced in DKO mice and significantly lower than single-null animals, while small intestine Ca2+ permeability is unaltered. The DKO mice display significantly greater urinary Ca2+ wasting than Cldn2 null animals. These perturbations lead to hypocalcemia and reduced bone mineral density, which was not observed in single-KO animals. Both claudins were localized to colonic epithelial crypts and renal proximal tubule cells, but they do not physically interact in vitro. Overexpression of either claudin increased Ca2+ permeability in cell models with endogenous expression of the other claudin. We find claudin-2 and claudin-12 form partially redundant, independent Ca2+ permeable pores in renal and colonic epithelia that enable paracellular Ca2+ (re)absorption in these segments, with either one sufficient to maintain Ca2+ balance.

The Mechanical Characterization and Comparions of Male and Female Calvaria Under Four-Point Bending Impacts.

The circumstances in which we mechanically test and critically assess human calvarium tissue would find relevance under conditions encompassing real-world head impacts. These conditions include, among other variables, impact velocities, and strain rates. Compared to quasi-static loading on calvaria, there is less reporting on the impact loading of the calvaria and consequently, there are relatively fewer mechanical properties on calvaria at relevant impact loading rates available in the literature. The purpose of this work was to report on the mechanical response of 23 human calvarium specimens subjected to dynamic four-point bending impacts. Impacts were performed using a custom-built four-point impact apparatus at impact velocities of 0.86-0.89 m/s resulting in surface strain rates of 2-3/s-representative of strain rates observed in vehicle collisions and blunt impacts. The study revealed comparable effective bending moduli (11-15 GPa) to the limited work reported on the impact mechanics of calvaria in the literature, however, fracture bending stress (10-47 MPa) was relatively less. As expected, surface strains at fracture (0.21-0.25%) were less compared to studies that performed quasi-static bending. Moreover, the study revealed no significant differences in mechanical response between male and female calvaria. The findings presented in this work are relevant to many areas including validating surrogate skull fracture models in silico or laboratory during impact and optimizing protective devices used by civilians to reduce the risk of a serious head injury.

Tooth attachment and pleurodont implantation in lizards: Histology, development, and evolution.

Squamates present a unique challenge to the homology and evolution of tooth attachment tissues. Their stereotypically pleurodont teeth are fused in place by a single "bone of attachment", with seemingly dubious homology to the three-part tooth attachment system of mammals and crocodilians. Despite extensive debate over the interpretations of squamate pleurodonty, its phylogenetic significance, and the growing evidence from fossil amniotes for the homology of tooth attachment tissues, few studies have defined pleurodonty on histological grounds. Using a sample of extant squamate teeth that we organize into three broad categories of implantation, we investigate the histological and developmental properties of their dental tissues in multiple planes of section. We use these data to demonstrate the specific soft- and hard-tissue features of squamate teeth that produce their disparate tooth implantation modes. In addition, we describe cementum, periodontal ligaments, and alveolar bone in pleurodont squamates, dental tissues that were historically thought to be restricted to extant mammals and crocodilians. Moreover, we show how the differences between pleurodonty and thecodonty do not relate to the identity of the tooth attachment tissues, but rather the arrangements of homologous tissues around the teeth.

The iliosacral joint in lizards: an osteological and histological analysis.

The development of the iliosacral joint (ISJ) in tetrapods represented a crucial step in the evolution of terrestrial locomotion. This structure is responsible for transferring forces between the vertebral column and appendicular skeleton, thus supporting the bodyweight on land. However, most research dealing with the water-to-land transition and biomechanical studies in general has focused exclusively on the articulation between the pelvic girdle and femur. Our knowledge about the contact between the pelvic girdle and vertebral column (i.e. the ISJ) at a tissue level is restricted so far to human anatomy, with little to no information available on other tetrapods. This lack of data limits our understanding of the development and evolution of such a key structure, and thus on the pattern and processes of the evolution of terrestrial locomotion. Therefore, we investigated the macro- and microanatomy of the ISJ in limb-bearing squamates that, similar to most non-mammalian, non-avian tetrapods, possess only two sacral ribs articulating with the posterior process of the ilium. Using a combination of osteology, micro-computed tomography and histology, we collected data on the ISJ apparatus of numerous specimens, sampling different taxa and different ontogenetic stages. Osteologically, we recorded consistent variability in all three processes of the ilium (preacetabular, supracetabular and posterior) and sacral ribs that correlate with posture and locomotion. The presence of a cavity between the ilium and sacral ribs, abundant articular cartilage and fibrocartilage, and a surrounding membrane of dense fibrous connective tissue allowed us to define this contact as a synovial joint. By comparison, the two sacral ribs are connected to each other mostly by dense fibrous tissue, with some cartilage found more distally along the margins of the two ribs, defining this joint as a combination of a syndesmosis and synchondrosis. Considering the intermediary position of the ISJ between the axial and appendicular skeletons, the shape of the articular surfaces of the sacral ribs and ilium, and the characteristics of the muscles associated with this structure, we argue that the mobility of the ISJ is primarily driven by the movements of the hindlimb during locomotion. We hypothesize that limited torsion of the ilium at the ISJ happens when the hip is abducted, and the joint is likely able to absorb the compressional and extensional forces related to the protraction and retraction of the femur. The mix of fibres and cartilage between the two sacral ribs instead serves primarily as a shock absorber, with the potential for limited vertical translation during locomotion.

Choline kinase beta is required for normal endochondral bone formation.

BACKGROUND: Choline kinase has three isoforms encoded by the genes Chka and Chkb. Inactivation of Chka in mice results in embryonic lethality, whereas Chkb(-/-) mice display neonatal forelimb bone deformations. METHODS: To understand the mechanisms underlying the bone deformations, we compared the biology and biochemistry of bone formation from embryonic to young adult wild-type (WT) and Chkb(-/-) mice. RESULTS: The deformations are specific to the radius and ulna during the late embryonic stage. The radius and ulna of Chkb(-/-) mice display expanded hypertrophic zones, unorganized proliferative columns in their growth plates, and delayed formation of primary ossification centers. The differentiation of chondrocytes of Chkb(-/-) mice was impaired, as was chondrocyte proliferation and expression of matrix metalloproteinases 9 and 13. In chondrocytes from Chkb(-/-) mice, phosphatidylcholine was slightly lower than in WT mice whereas the amount of phosphocholine was decreased by approximately 75%. In addition, the radius and ulna from Chkb(-/-) mice contained fewer osteoclasts along the cartilage/bone interface. CONCLUSIONS: Chkb has a critical role in the normal embryogenic formation of the radius and ulna in mice. GENERAL SIGNIFICANCE: Our data indicate that choline kinase beta plays an important role in endochondral bone formation by modulating growth plate physiology.

Synthesis and structural identification of fluorine-18 labeled parathyroid hormone.

Parathyroid hormone (PTH) is an 84 amino acid peptide hormone that plays a key role in bone and mineral metabolism. The biological actions of PTH are mediated via the N-terminal PTH(1-34) fragment, serving as the PTH receptor-binding sequence, and which is therefore used clinically to treat conditions of low bone mass such as osteoporosis. In this study, PTH(1-34) was conjugated with non-radioactive (stable F isotope) N-succinimidyl 4-fluorobenzoate (SFB) leading to three isomeric mono-fluorobenzoated (FBz) PTH followed by Liquid chromatography-Tandem mass spectrometry (LC-MS/MS) assisted structural identification. Corresponding [(18)F]SFB-labeled PTH derivatives were prepared respectively and the Lys(13) site-specific labeled [(18)F]FBz PTH was isolated by HPLC with radiochemical purity >99% and specific activity of 2.78 GBq/µmol, suitable for future application with in vivo pharmacokinetic/pharmacodynamic studies of PTH, using preclinical Positron Emission Tomography Computed Tomography (PET/CT) imaging.

Expression, characterization, and evaluation of a RANK-binding single chain fraction variable: an osteoclast targeting drug delivery strategy.

A single chain Fraction variable (scFv) employs antibody-like target recognition specificity. Osteoclasts, responsible for bone resorption, express Receptor Activator of Nuclear factor Kappa B (RANK) receptors. This study aimed to express, characterize, and evaluate scFv against RANK receptors that may serve as a platform to target osteoclasts. Using phage display technology, scFv against RANK receptor was expressed and characterized by DNA sequencing, sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), matrix-assisted laser desorption-ionization time-of-flight (MALDI TOF), enzyme-linked immunosorbent assay (ELISA), Western blot, and immunocytochemistry. The potential for cytotoxicity was evaluated using an MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide) assay, and its cross reactivity was evaluated using ELISA. Osteoclast-like cells were generated from RAW 264.7 cells, and the osteoclast targeting ability of scFv was evaluated using immunocytochemistry. ScFv's antiresorptive efficacy was studied using a tartrate-resistant acid phosphatase (TRAP) assay and resorption assay. Anti-RANK scFv was successfully expressed and characterized. No cross reactivity with other tumor necrosis factor receptor (TNFR) members and no cytotoxic effect on a non-RANK bearing cell line were observed. It showed specificity toward a RANK receptor and an inhibitory effect on osteoclast activity. With the increase in development trends for biologics as therapeutics and growing knowledge on the importance of osteoclast targeted therapy, this study may provide a drug delivery strategy to target osteoclasts, thereby leading to a promising therapy for resorptive bone diseases.

Synthesis, characterization and biodistribution studies of (125)I-radioiodinated di-PEGylated bone targeting salmon calcitonin analogue in healthy rats.

PURPOSE: The objective of this study was to prepare a bisphosphonate (BP) mediated bone targeting di-PEGylated salmon calcitonin analogue sCT-2(PEG-BP) as a novel bone targeting pharmaceutical. METHODS: HPLC was used for isolation of sCT-2(PEG-BP) from the reaction mixture, followed by determination of possible PEGylation sites by trypsin digestion. Stability of the compound over time, bone mineral affinity using hydroxyapatite, and biodistribution in normal rats after radiolabeling of sCT-2(PEG-BP) or control sCT with (125)I was evaluated. RESULTS: PEGylated sCT analogues were synthesized, and sCT-2(PEG-BP) was isolated by HPLC and confirmed by MALDI-TOF and ICP-MS. MALDI-TOF analysis of trypsinized fragments suggested Cys(1) (or Lys(11)) and Lys(18) to be the two PEGylation sites. Bone mineral affinity test showed sCT-2(PEG-BP) or (125)I-sCT-2(PEG-BP) exhibited significantly increased bone mineral affinity over sCT or (125)I-sCT, respectively. sCT-2(PEG-BP) remained stable for at least 1 month. In vivo biodistribution study showed significantly increased bone retention and prolonged plasma circulation time for sCT-2(PEG-BP) compared to the control sCT. CONCLUSION: Those results support sCT-2(PEG-BP) as a promising new drug candidate for the treatment of resorptive and/or maladaptive bone conditions, such as Osteoporosis, Osteoarthritis, Rheumatoid Arthritis, Paget's disease and bone cancers.

Disruption of the c-terminal serine protease domain of Fam111a does not alter calcium homeostasis in mice.

FAM111A gene mutations cause Kenney-Caffey syndrome (KCS) and Osteocraniostenosis (OCS), conditions characterized by short stature, low serum ionized calcium (Ca2+), low parathyroid hormone (PTH), and bony abnormalities. The molecular mechanism mediating this phenotype is unknown. The c-terminal domain of FAM111A harbors all the known disease-causing variations and encodes a domain with high homology to serine proteases. However, whether this serine protease domain contributes to the maintenance of Ca2+ homeostasis is not known. We hypothesized the disruption of the serine protease domain of FAM111A would disrupt Ca2+ homeostasis. To test this hypothesis, we generated with CRISPR/Cas9, mice with a frameshift insertion (c.1450insA) or large deletion (c.1253-1464del) mutation in the Fam111a serine protease domain. Serum-ionized Ca2+ and PTH levels were not significantly different between wild type, heterozygous, or homozygous Fam111a mutant mice. Additionally, there were no significant differences in fecal or urine Ca2+ excretion, intestinal Ca2+ absorption or overall Ca2+ balance. Only female homozygous (c.1450insA), but not heterozygous mice displayed differences in bone microarchitecture and mineral density compared to wild-type animals. We conclude that frameshift mutations that disrupt the c-terminal serine protease domain do not induce a KCS or OCS phenotype in mice nor alter Ca2+ homeostasis.

Compositional and material properties of rat bone after bisphosphonate and/or Strontium ranelate drug treatment.

PURPOSE: We investigated elemental strontium and/or bisphosphonate drug incorporation upon the compositional and biomechanical properties of vertebral bone, in a rat model of Osteoporosis secondary to ovariectomy. METHODS: Six month old female rats were ovariectomized (OVX) and divided into untreated OVX-Vehicle, OVX-RIS (Risedronate bisphosphonate [BP] treated), OVX-SrR (Strontium Ranelate [Protos®] treated), combination OVX-RIS+SrR, and sham-operated controls. After 16 weeks of treatment, rats were euthanized and lumbar vertebra were dissected. Micro-Computed Tomography (micro-CT), Electron Probe Micro-Analysis (EPMA), mechanical testing in compression and nano-indentation testing were then undertaken to evaluate bone morphometry, elemental composition, material properties and strength. RESULTS: Bone Volume was significantly reduced in the OVX-Vehicle (133±10 mm(3)) compared with OVX-RIS (169±22 mm(3)), OVX-SrR (145±2 mm(3)), and OVX-RIS+SrR (172±8 mm(3)). EPMA mapped elemental Sr deposition to the periosteal surface of cortical bone (50-100 µm thick), endosteal trabecular surfaces (20 µm thick), as well as to both vertebral growth plates. The atomic ratios of (Ca+Sr)/P were significantly reduced with SrR treatment (2.4%-6.6%), indicating Sr incorporation into bone mineral. No significant differences were measured in vertebral bone reduced modulus by nano-indentation. Conversely, all BP-dosed groups had significantly increased structural bone strength. CONCLUSIONS: Thus, we conclude that BP drugs dominate the conservation of trabecular geometry and structural strength in OP rats, whereas Sr drugs likely influence bone volume and material composition locally.

Impact of bisphosphonate drug burden in alveolar bone during orthodontic tooth movement in a rat model: a pilot study.

INTRODUCTION: The aim of this pilot study was to investigate the effect of long-term bisphosphonate drug use (bone burden) on orthodontic tooth movement in a rat model. METHODS: Sprague Dawley rats were used for orthodontic protraction of the maxillary first molars with nickel-titanium coil springs and temporary anchorage devices as anchorage. Four groups of 5 rats each were included in the study; the first 2 groups were dosed with alendronate or a vehicle during concurrent orthodontic tooth movement. The third and fourth groups were pretreated for 3 months with alendronate or vehicle injections, and bisphosphonate drug treatment was discontinued before orthodontic tooth movement. Tooth movement measurements were obtained at 0, 4, and 8 weeks using high-resolution in-vivo microcomputed tomography, and the tissues were analyzed with histology and dynamic labeling of bone turnover. RESULTS: Appreciable tooth movement was achieved during the 8-week duration of this study with nickel-titanium coil springs and temporary anchorage devices. Both bisphosphonate treatment groups exhibited reduced tooth movement compared with the vehicle-dosed controls with a tendency toward more severe reduction in the bisphosphonate predosed group. Concurrent dosing of the bisphosphonate drug resulted in 56% and 65% reductions in tooth protraction at the 4-week and 8-week times, respectively. The impact of bisphosphonate bone burden in retarding tooth movement was even greater, with 77% and 86% reductions in tooth movement at 4 and 8 weeks, respectively. CONCLUSIONS: In this study, we used a robust rat model of orthodontic tooth movement with temporary anchorage devices. It has provided evidence that the bone burden of previous bisphosphonate use will significantly inhibit orthodontic tooth movement.

Therapeutic Potential and Predictive Pharmaceutical Modeling of Stilbenes in Cannabis sativa.

Cannabis sativa is a plant used for recreational and therapeutic purposes; however, many of the secondary metabolites in the plant have not been thoroughly investigated. Stilbenes are a class of compounds with demonstrated anti-inflammatory and antioxidant properties and are present in cannabis. Many stilbenes present in cannabis have been investigated for their therapeutic effects. Fourteen stilbenes have been identified to be present in cannabis, all of which are structurally dihydrostilbenoids, with half possessing a prenylated moiety. The stilbenes summarized in this analysis show varying degrees of therapeutic benefits ranging from anti-inflammatory, antiviral, and anti-cancer to antioxidant effects. Many of the identified stilbenes have been researched to a limited extent for potential health benefits. In addition, predictive in silico modeling was performed on the fourteen identified cannabis-derived stilbenes. This modeling provides prospective activity, pharmacokinetic, metabolism, and permeability data, setting the groundwork for further investigation into these poorly characterized compounds.

Three-dimensional morphometric analysis of cranial sutures - A novel approach to quantitative analysis.

Objective: Differences in complexity of cranial suture forms on the endocranial (i.e., deep) and ectocranial (i.e., superficial) skull surfaces have been noted in the literature, indicating through thickness three-dimensional (3D) suture variability depending on the chosen section and necessity for considering the complete 3D structure in many cases. This study aims to evaluate the variability of suture morphology through the skull thickness using a rat model, and to provide more robust metrics and methodologies to analyze suture morphology. Design: X-ray micro-computed tomographic (µCT) imaging methods were utilized in order to provide internal structure information. Methods were developed to isolate and analyze sutures widths and linear interdigitation index (LII) values on each adjacent offset transverse plane of the µCT datasets. LII was defined as the curved path length of the suture divided by the linear length between the ends of the region of interest. Scans were obtained on 15 female rats at ages of 16, 20, and 24 weeks (n = 5/age). Samples were imaged at 18 µm resolutions with 90 kV source voltage, 278 µA source amperage, and 0.7° increments. Suture widths and LII values were compared using a Kruskal-Wallis test. Results: 3D variability in local suture widths within individuals, as well as through thickness variabilities in planar widths and LII was observed. Kruskal-Wallis tests for bulk through thickness averaged suture widths and LII were found to be statistically insignificant, despite clear geometric differences through suture thicknesses. Conclusion: Although the bulk morphometric variability between age groups was found to be statistically insignificant, the 3D variability within individuals point to the importance of analyzing suture form using 3D metrics when studying suture development, response to functional activity, or morphometry in general.

The effect of morphometric and geometric indices of the human calvarium on mechanical response.

BACKGROUND: When developing a surrogate model of the human skull, there is a multitude of morphometric and geometric properties to consider when constructing the model. To simplify this approach, it is important to identify only the properties that have a significant influence on the mechanical response of the skull. The objective of this study was to identify which morphometric and geometric properties of the calvarium were significant predictors of mechanical response. METHODS: Calvarium specimens (N = 24) were micro-computed tomography scanned to determine morphometric and geometric properties. The specimens were assumed to be Euler-Bernoulli beams and were subject to 4-point quasi-static bending to determine mechanical response. Univariate linear regressions were performed whereby the morphometric and geometric properties were independent or predictor variables and the mechanical responses were dependent or outcome variables. FINDINGS: Nine significant linear regression models were established (p < 0.05). In the diploë, trabecular bone pattern factor was a significant predictor of force and bending moment at fracture. The inner cortical table had more significant predictors (thickness, tissue mineral density, and porosity) of mechanical response compared to the outer cortical table and diploë. INTERPRETATION: Morphometric and geometric properties had a key influence on the calvarium's biomechanics. Trabecular bone pattern factor and the morphometry and geometry of the cortical tables must be considered when evaluating the mechanical response of the calvarium. These properties can aid the design of surrogate models of the skull that seek to mimic its mechanical response for head impact simulation.

The epithelial sodium/proton exchanger, NHE3, is necessary for renal and intestinal calcium (re)absorption.

Passive paracellular proximal tubular (PT) and intestinal calcium (Ca(2+)) fluxes have been linked to active sodium (re)absorption. Although the epithelial sodium/proton exchanger, NHE3, mediates apical sodium entry at both these sites, its role in Ca(2+) homeostasis remains unclear. We, therefore, set out to determine whether NHE3 is necessary for Ca(2+) (re)absorption from these epithelia by comparing Ca(2+) handling between wild-type and NHE3(-/-) mice. Serum Ca(2+) and plasma parathyroid hormone levels were not different between groups. However, NHE3(-/-) mice had increased serum 1,25-dihydroxyvitamin D(3). The fractional excretion of Ca(2+) was also elevated in NHE3(-/-) mice. Paracellular Ca(2+) flux across confluent monolayers of a PT cell culture model was increased by an osmotic gradient equivalent to that generated by NHE3 across the PT in vivo and by overexpression of NHE3.( 45)Ca(2+) uptake after oral gavage and flux studies in Ussing chambers across duodenum of wild-type and NHE3(-/-) mice confirmed decreased Ca(2+) absorption in NHE3(-/-) mice compared with wild-type mice. Consistent with this, intestinal calbindin-D(9K), claudin-2, and claudin-15 mRNA expression was decreased. Microcomputed tomography analysis revealed a perturbation in bone mineralization. NHE3(-/-) mice had both decreased cortical bone mineral density and trabecular bone mass. Our results demonstrate significant alterations of Ca(2+) homeostasis in NHE3(-/-) mice and provide a molecular link between Na(+) and Ca(2+) (re)absorption.

Cranial suture morphometry and mechanical response to loading: 2D vs. 3D assumptions and characterization.

Cranial sutures are complex soft tissue structures whose mechanics are often studied due to their link with bone growth in the skull. Researchers will often use a cross-sectional two-dimensional slice to define suture geometry when studying morphometry and/or mechanical response to loading. However, using a single cross section neglects the full suture complexity and may introduce significant errors when defining their form. This study aims to determine trends in suture path variability through skull thickness in a swine model and the implications of using a 'representative' cross section on mechanical modeling. To explore these questions, a mixture of quantitative analysis of computed tomography images and finite element models was used. The linear interdigitation and width of coronal and sagittal sutures were analyzed on offset transverse planes through the skull thickness. It was found that sagittal suture width and interdigitation were largely consistent through the skull thickness, whereas the coronal suture showed significant variation in both. The finite element study found that average values of displacement and strain were similar between the two-dimensionally variable and three-dimensionally variable models. Larger ranges and more complex distributions of strain were found in the three-dimensionally variable model. Outcomes of this study indicate that the appropriateness of using a representative cross section to describe suture morphometry and predict mechanical response should depend on specific research questions and goals. Two-dimensional approximations can be sufficient for less-interdigitated sutures and when bulk site mechanics are of interest, while taking the true three-dimensional geometry into account is necessary when considering spatial variability and local mechanical response.

Incomplete penetrance and phenotypic variability characterize Gdf6-attributable oculo-skeletal phenotypes.

Proteins of the bone morphogenetic protein (BMP) family are known to have a role in ocular and skeletal development; however, because of their widespread expression and functional redundancy, less progress has been made identifying the roles of individual BMPs in human disease. We identified seven heterozygous mutations in growth differentiation factor 6 (GDF6), a member of the BMP family, in patients with both ocular and vertebral anomalies, characterized their effects with a SOX9-reporter assay and western analysis, and demonstrated comparable phenotypes in model organisms with reduced Gdf6 function. We observed a spectrum of ocular and skeletal anomalies in morphant zebrafish, the latter encompassing defective tail formation and altered expression of somite markers noggin1 and noggin2. Gdf6(+/-) mice exhibited variable ocular phenotypes compatible with phenotypes observed in patients and zebrafish. Key differences evident between patients and animal models included pleiotropic effects, variable expressivity and incomplete penetrance. These data establish the important role of this determinant in ocular and vertebral development, demonstrate the complex genetic inheritance of these phenotypes, and further understanding of BMP function and its contributions to human disease.

Antibody-mediated "universal" osteoclast targeting platform using calcitonin as a model drug.

PURPOSE: To generate and characterize a specific monoclonal antibody (mAb) against recombinant human RANK receptor and to develop an antiresorptive strategy using this mAb as an osteoclast-targeting platform that selectively targets osteoclast cells whilst delivering an attached (i.e. chemically conjugated) active drug cargo. METHODS: Using hybridoma technology, we generated a specific monoclonal antibody (mAb) against recombinant human RANK receptor and characterized by SDS PAGE, ELISA, Western Blot and immunocytochemistry, then synthesized osteoclast-targeting bioconjugates of salmon calcitonin (sCT) using this antibody by generating thiol groups on mAb using 2-Iminothiolane and subsequently reacting them with sCT-PEG-MAL synthesised from sCT and NHS-PEG-MAL. To test the efficacy of the conjugate in vitro, osteoclasts were generated from precursor RAW 264.7 cells by dosing with the cytokines macrophage-colony-stimulating factor (M-CSF), and RANK Ligand (RANKL) and TRAP activity assay, Resorption Pit Assay, TRAP staining were performed. Cytotoxicity of the mAb-sCT conjugate was also evaluated in RAW 264.7 cells; sCT bioactivity and CTR binding potential were evaluated by in vitro intracellular cAMP stimulation assay in human T47D breast cancer cells. RESULTS: Generation of antibody against human RANK receptor was confirmed by SDS PAGE, ELISA and Western Blot. Immunocytochemistry confirmed the osteoclast targeting potential of the antibody. Successful conjugation of the antibody with sCT was confirmed by SDS PAGE and ELISA.Multinucleated osteoclast formation was confirmed by staining for tartrate-resistant acid phosphatase (TRAP). Conjugate functionality was confirmed by TRAP activity and Resorption Pit assay, showing the inhibitory effect on osteoclast differentiation. cAMP assay confirmed the retention of calcitonin bioactivity after conjugation. CONCLUSIONS: Our strategy offers the potential for a "universal" osteoclast-targeting platform--one that targets the RANK receptor on osteoclast cells by simply altering the conjugated cargo in order to affect the specific regulation of osteoclast cells.

In vivo microfocal computed tomography and micro-magnetic resonance imaging evaluation of antiresorptive and antiinflammatory drugs as preventive treatments of osteoarthritis in the rat.

OBJECTIVE: To determine whether treatment with an antiresorptive drug in combination with an antiinflammatory drug reduces periarticular bone and soft tissue adaptations associated with the progression of posttraumatic secondary osteoarthritis (OA). METHODS: We used in vivo microfocal computed tomography (micro-CT) to map bony adaptations and in vivo micro-magnetic resonance imaging (micro-MRI) to examine joint inflammation in a rat model of surgically induced OA secondary to knee triad injury. We examined the arthroprotective effects of the bisphosphonates alendronate and risedronate and the nonsteroidal antiinflammatory drug (NSAID) meloxicam. RESULTS: Micro-CT revealed reduced levels of periarticular trabecular bone loss in animals with knee triad injury treated with the bisphosphonate drugs alendronate or risedronate, or the NSAID meloxicam, compared with untreated animals. Alendronate treatment reduced bony osteophyte development. While risedronate as a monotherapy did not positively impact osteophytogenesis, combination therapy with risedronate and meloxicam reduced osteophyte severity somewhat. Micro-MRI revealed an increased, diffuse water signal in the epiphyses of untreated rats with knee triad injury 8 weeks after surgery, suggestive of a bone marrow lesion-like stimulus. In contrast, meloxicam-treated rats showed a significant reduction in fluid signal compared with both bisphosphonate-treated groups 8 weeks after surgery. Histologic analysis qualitatively confirmed the chondroprotective effect of both bisphosphonate treatments, showing fewer degradative changes compared with untreated rats with knee triad injury. CONCLUSION: Our findings indicate that select combinations of bisphosphonate and NSAID drug therapy in the early stages of secondary OA preserve trabecular bone mass and reduce the impact of osteophytic bony adaptations and bone marrow lesion-like stimulus. Bisphosphonate and NSAID therapy may be an effective disease-modifying drug regimen if administered early after the initial injury.

Experimental repeatability, sensitivity, and reproducibility of force and strain measurements from within the periodontal ligament space during ex vivo swine tooth loading.

The Periodontal Ligament (PDL) is a complex connective tissue that anchors a tooth to the surrounding alveolar bone. The small size and complex geometry of the PDL space within an intact tooth-PDL-bone complex (TPBC) limits strain measurements. An in-fiber Bragg grating (FBG) sensor offers potential for such measurements due to its small size. This work defines an experimental procedure where strain and force were measured during quasi-static, apically directed, displacement-controlled tests on swine premolar crowns. Specifically, the: inter-TPBC, intra-TPBC, and long-term repeatability after a preconditioned state was objectively identified; sensitivity to preload magnitude, TPBC alignment, and sensor depth; and reproducibility within a TPBC was determined. Data clustering was used to determine the appropriate number of preconditioning trials, ranging from one to seven. Strain and force measurements showed intra-TPBC repeatability with average adjusted root mean square from the median of 28.9% of the peak strain and 4.5% of the peak force measurement. A Mann-Whitney U test generally found statistically significant differences in peak strain and force measurements between the left and right sides, suggesting a lack of inter-TPBC repeatability. Using a Friedman test, it was shown that peak strain measures were sensitive to the TPBC alignment and sensor depth, while peak force measures were sensitive to the preload and TPBC alignment. A Friedman test suggested reproducible strain and force measurements when the FBG was replaced within the same TPBC and the preload, alignment, and sensor depth were controlled.