Artificial Peptide-Protein Necrosomes Promote Cell Death.

The presence of disordered region or large interacting surface within proteins significantly challenges the development of targeted drugs, commonly known as the "undruggable" issue. Here, we report a heterogeneous peptide-protein assembling strategy to selectively phosphorylate proteins, thereby activating the necroptotic signaling pathway and promoting cell necroptosis. Inspired by the structures of natural necrosomes formed by receptor interacting protein kinases (RIPK) 1 and 3, the kinase-biomimetic peptides are rationally designed by incorporating natural or D -amino acids, or connecting D -amino acids in a retro-inverso (DRI) manner, leading to one RIPK3-biomimetic peptide PR3 and three RIPK1-biomimetic peptides. Individual peptides undergo self-assembly into nanofibrils, whereas mixing RIPK1-biomimetic peptides with PR3 accelerates and enhances assembly of PR3. In particular, RIPK1-biomimetic peptide DRI-PR1 exhibits reliable binding affinity with protein RIPK3, resulting in specific cytotoxicity to colon cancer cells that overexpress RIPK3. Mechanistic studies reveal the increased phosphorylation of RIPK3 induced by RIPK1-biomimetic peptides, elucidating the activation of the necroptotic signaling pathway responsible for cell death without an obvious increase in secretion of inflammatory cytokines. Our findings highlight the potential of peptide-protein hybrid aggregation as a promising approach to address the "undruggable" issue and provide alternative strategies for overcoming cancer resistance in the future.

Polyglycidol-Stabilized Nanoparticles as a Promising Alternative to Nanoparticle PEGylation: Polymer Synthesis and Protein Fouling Considerations.

We herein demonstrate the outstanding protein-repelling characteristic of star-like micelles and polymersomes manufactured from amphiphilic block copolymers made by poly(butylene oxide) (PBO) hydrophobic segments and polyglycidol (PGL) hydrophilic outer shells. Although positively charged proteins (herein modeled by lysozyme) may adsorb onto the surface of micelles and polymersomes where the assemblies are stabilized by short PGL chains (degree of polymerization smaller than 15), the protein adsorption vanishes when the degree of polymerization of the hydrophilic segment (PGL) is higher than ∼20, regardless the morphology. This has been probed by using three different model proteins which are remarkably different concerning molecular weight, size, and zeta potential (bovine serum albumin (BSA), lysozyme, and immunoglobulin G (IgG)). Indeed, the adsorption of the most abundant plasma protein (herein modeled as BSA) is circumvented even by using very short PGL shells due to the highly negative zeta potential of the produced assemblies which presumably promote protein-nanoparticle electrostatic repulsion. The negative zeta potential, on the other hand, enables lysozyme adsorption, and the phenomenon is governed by electrostatic forces as evidenced by isothermal titration calorimetry. Nevertheless, the protein coating can be circumvented by slightly increasing the degree of polymerization of the hydrophilic segment. Notably, the PGL length required to circumvent protein fouling is significantly smaller than the one required for PEO. This feature and the safety concerns regarding the synthetic procedures on the preparation of poly(ethylene oxide)-based amphiphilic copolymers might make polyglycidol a promising alternative toward the production of nonfouling spherical particles.

Neutral Block Copolymer Assisted Gene Delivery using Hydrodynamic Limb Vein Injection.

Three different amphiphilic block copolymer families are synthesized to investigate new opportunities to enhance gene delivery via Hydrodynamic Limb Vein (HLV) injections. First a polyoxazoline-based family containing mostly one poly(2-methyl-2-oxazoline) (PMeOx) block and a second block POx with an ethyl (EtOx), isopropyl (iPrOx) or phenyl substituent (PhOx) is synthesized. Then an ABC poly(2-ethyl-2-oxazoline)-b-poly(2-n-propyl-2-oxazoline)-b-poly(2-methyl-2-oxazoline) triblock copolymer is synthesized, with a thermosensitive middle block. Finally, polyglycidol-b-polybutylenoxide-b-polyglycidol copolymers with various molar masses and amphiphilic balance are produced. The simple architecture of neutral amphiphilic triblock copolymer is not sufficient to obtain enhanced in vivo gene transfection. Double or triple amphiphilic neutral block copolymers are improving the in vivo transfection performances through HLV administration as far as a block having an lower critical solution temperature is incorporated in the vector. The molar mass of the copolymer does not seem to affect the vector performances in a significant manner.

Engineering of ion permeable planar membranes and polymersomes based on ß-cyclodextrin-cored star copolymers.

For polymersome-based nanoreactor purposes, we herein present the synthesis and characterization of well-defined star amphiphilic copolymers composed of a beta-cyclodextrin (ßCD) core and seven poly(butylene oxide)-block-polyglycidol (PBO-PGL) arms per side (ßCD-(PBO-PGL)14). The self-assembly behavior of 14-armed ßCD-(PBO-PGL)14 and PGL-PBO-PGL (linear analogues without the ßCD segment) was investigated using scattering techniques for comparison. The morphologies, including vesicles and micelles, are governed by the hydrophobic-to-hydrophilic (weight) ratio, regardless of the polymer architecture (linear or star). Interestingly, despite notable differences in polymer conformation, the produced supramolecular structures were evidenced to be fairly similar on the structural point of view. We subsequently investigated the ion permeability of the membranes of the self-assemblies focusing on the impact of the presence of ßCD. The results demonstrated that the ßCD-containing vesicular membranes are less permeable to H+, compared with ßCD-free vesicular membranes. The presence of ßCD in planar membranes also influences the K+Cl- permeability to some extent. Thus, ßCD-containing membranes can be considered as potential candidates in designing nano-containers towards applications where precise changes in environmental pH are required.

A star-shaped poly(2-methyl-2-oxazoline)-based antifouling coating: Application in investigation of the interaction between acetaminophen and bovine serum albumin by frontal analysis capillary electrophoresis.

In this work, an antifouling capillary modified with star-shaped poly(2-methyl-2-oxazoline)-based copolymer was used to study the interaction between acetaminophen (APAP) and bovine serum albumin (BSA) by frontal analysis capillary electrophoresis (FACE). The star-shaped copolymer, poly(ethylene imine)-graft-poly(2-methyl-2-oxazoline) (PEI-g-PMOXA), was immobilized onto the fused-silica capillary inner wall via dopamine-assisted co-deposition strategy, yielding a PEI-g-PMOXA/polydopamine (PDA)-coated antifouling capillary, i.e., an antifouling capillary coated with the PEI-g-PMOXA/PDA co-deposited film. Electroosmotic flow (EOF) mobility of the PEI-g-PMOXA/PDA-coated capillary was almost zero in a wide pH range (3.0-10.0), while the EOF mobility of bare capillary was much larger and increased significantly with pH increasing. When the PEI-g-PMOXA/PDA-coated capillary was exploited to separate a protein mixture including cytochrome c, lysozyme, ribonuclease A and α-chymotrypsinogen A, the theoretical plate numbers were of five orders of magnitude which were about ten-fold higher over those obtained with bare capillary; in addition, the RSD values of migration time were mostly less than 0.7% (30 consecutive runs) which were much smaller than those of bare capillary (c.a. 5.7%). The protein-resistant PEI-g-PMOXA/PDA-coated capillary was then used to investigate the interaction between APAP and BSA by FACE, the binding constant and number of binding sites at 25°C and pH 7.4 (Tris/HCl buffer of 25mM) were 1.39×104M-1 and 1.08, respectively, which were comparable to the results determined by fluorescence spectroscopic measurement (3.18×104M-1 and 1.19, respectively).

Poly (2-methyl-2-oxazoline) coating by thermally induced immobilization for determination of bovine lactoferrin in infant formula with capillary electrophoresis.

In this work, a one-step coating procedure by a simple annealing protocol of poly (2-methyl-2-oxazoline)-random-glycidyl methacrylate (PMOXA-r-GMA) copolymer was used to yield covalent and cross-linked PMOXA-based antifouling coating on a fused-silica capillary inner surface, which was used to determine the bovine lactoferrin (Lf) in infant formula by capillary electrophoresis with ultraviolet (CE-UV) detection. The X-ray photoelectron spectroscopy (XPS) confirmed that PMOXA-r-GMA could be bonded onto fused-silica capillary inner wall and stable electroosmotic flow (EOF) was obtained in the PMOXA-r-GMA coated capillary at pH 2.2-9.0. The separation of a mixture of four basic proteins indicated that the PMOXA-r-GMA coated capillary exhibited excellent separation efficiency for the basic proteins. Therefore, the PMOXA-r-GMA coated capillary was used to determine the quantity of Lf in infant formula. Under the optimal conditions, the peak area (A) and the concentration of Lf showed a good linear relationship within the range of 10-500µg/mL with a linear correlation coefficient of 0.9995. The limit of detection (LOD) and limit of quantitation (LOQ) for Lf were 5.0µg/mL and 16.7µg/mL, respectively. The recoveries at spiked concentrations of 0.20 and 0.40mg/mL Lf in infant formula were 97.1±5.5% - 97.8±5.1%. The determined values of Lf in infant formula samples with Lf were consistent with the nominal values, indicating that our CE method could be successfully applied to the quantitative analysis of Lf in commercial infant formula.