Enhanced Photovoltaic Performance of Asymmetrical Benzo Dithiophene Homopolymer Donor Materials in Nonfullerene Acceptor-Based Organic Photovoltaics.

Although much promising synthetic progress in conjugated polymer-based organic solar cells (OSCs) has resulted in significant improvement in power conversion efficiencies (PCEs) of from over 15 to >19.0% in the last five years, the sophisticated and complex reactions from at least two families' monomers with remarkably different electron push-pull effects could still pose an unavoidable material burden for the commercialization of OSCs in the coming future. Therefore, the method of preparing a homopolymer from a sole monomer would significantly reduce the synthetic steps and costs in order to pave the way for the large-scale production of OSC materials. Therefore, alkylthio-thiophenyl-substituted benzo[1,2-b;4,5-b']dithiophene (BDTTS) as the sole and key structural moiety with dihalogen and distannyl functional groups was designed and synthesized, respectively, in this study, for facile monomer syntheses and polymerizations to achieve three wide-bandgap homopolymer donors of BDTTS-alt-BDTT-Cl (P13), BDTTS-alt-BDTT (P15), and BDTTS (P14), respectively. The structural symmetry dependency on their physical, electrochemical, and optical properties, thin-film morphologies, and photovoltaic (PV) performance was investigated in detail. As a result, OSCs based on the asymmetric polymer P15, paired with BTP-eC9 as the electron acceptor, presented the best PV performance, with a PCE of 11.5%, a fill factor (FF) of 65.87%, and a short-circuit current (JSC) of 22.04 mA·cm-2, respectively. This PCE value is among the highest ones reported for BDT-type homopolymer donor-based OPVs, providing us with knowledge for obtaining promising PV performance from devices made of P15-like materials.

Challenging PM6-like donor polymers for pairing with a Y-type state-of-the-art acceptor in binary blends for bulk heterojunction solar cells.

Being fluorine-free and a high performance material as a small organic acceptor molecule, BTP-eC9 has been well mixed with BDT-based PM6 donor polymers for providing satisfactory photovoltaic properties, especially towards future large scale/large area solar cell production. However, as one of the key electrical outputs from such binary active layer materials, the open circuit voltage (VOC) was limited to ca. 0.84 V, which needs to be further improved for BTP-eC9 to have a bright future. This paper focuses on the molecular design of alkylthio- and alkoxy-phenyl flanked benzo[1,2-b:4,5-b']dithiophene-based conjugated polymers (PBDT-PS-ttTPD or P10 for short and PBDT-PO-ttTPD or P11), which were successfully synthesized and applied as donor materials for pairing with BTP-eC9 in organic photovoltaic (OPV) devices. By fine-tuning the side chains of the benzodithiophene (BDT) moiety, such non-fullerene OPV devices with normal configuration demonstrate an attractively high open circuit voltage (VOC) of 0.89 and 0.87 V in P10/BTP-eC9 and P11/BTP-eC9 based binary single bulk heterojunction OPV devices, while still maintaining an excellent JSC of 22.7 and 20.0 mA cm-2 with a final power conversion efficiency (PCE) of 12.93% and 9.37%, respectively. The alkylthio-phenyl chain substituted BDT polymer exhibits better photovoltaic performance in all aspects than the alternative with alkoxy chains due to the synergistic effect of the alkylthio-phenyl flanked BDT, TPD, and π-bridge (thieno[3,2-b]thiophene).

Utilizing alkoxyphenyl substituents for side-chain engineering of efficient benzo[1,2-b:4,5-b']dithiophene-based small molecule organic solar cells.

A new two-dimensional (2D) conjugated small molecule, namely DCA3TBDTP, with an alkoxyphenyl substituted benzo[1,2-b:4,5-b']dithiophene (BDT) unit as the central core, octyl cyanoacetate as the end-capped groups and terthiophene as the π-linked bridge, was designed and synthesized for solution-processed organic solar cells (OSCs) as an electron donor material, in which an alkoxyphenyl group was introduced as a weak electron-donating side chain of the BDT moiety. The DCA3TBDTP molecule exhibited good solubility, a deep highest occupied molecular orbital (HOMO) level (-5.25 eV), an appropriate optical band-gap (1.82 eV) and a high decomposition temperature (362 °C). By applying the simple solution spin-coating fabrication process, the bulk heterojunction (BHJ) OSCs based on DCA3TBDTP and [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) exhibited a good power conversion efficiency (PCE) of 4.51% with a high open-circuit voltage (Voc) of 0.90 V when thermal annealing at only 70 °C.

Novel donor-acceptor polymer containing 4,7-bis(thiophen-2-yl)benzo[c][1,2,5]thiadiazole for polymer solar cells with power conversion efficiency of 6.21%.

In order to improve the solution processability of 4,7-bis(thiophen-2-yl)benzo[c][1,2,5]thiadiazole (DTBT)-based polymers, novel donor-acceptor polymer PTOBDTDTBT containing DTBT and benzo[1,2-b:4,5-b']dithiophene (BDT) with conjugated side chain is designed and synthesized with narrow band gap 1.67 eV and low lying HOMO energy level -5.4 eV. The blend film of PTOBDTDTBT and PC71 BM exhibits uniform and smooth film with root-mean-square (RMS) surface roughness 1.15 nm because of the excellent solubility of PTOBDTDTBT when six octyloxy side chains are introduced. The hole mobility of the blend film is measured to be 4.4 × 10(-5) cm(2) V(-1) s(-1) by the space-charge-limited current (SCLC) model. The optimized polymer solar cells (PSCs) based on PTOBDTDTBT/PC71 BM exhibits an improved PCE of 6.21% with Voc = 0.80 V, Jsc = 11.94 mA cm(-2) and FF = 65.10%, one of the highest PCE in DTBT containing polymers.

Synthesis and characterization of functional thienyl-phosphine microporous polymers for carbon dioxide capture.

A novel kind of functional organic microporous polymer is designed by introducing polar organic groups (P=O and P=S) and electron-rich heterocyclic into the framework to obtain high carbon dioxide capture capacity. The estimated Brunauer-Emmett-Teller (BET) surface areas of these polymers are about 600 m(2) g(-1) and the highest CO2 uptake is 2.26 mmol g(-1) (1.0 bar/273 K). Interestingly, the polymer containing P=O groups shows greater CO2 capture capacity than that containing P=S groups at the same temperature. In addition, these polymers show high isosteric heats of CO2 adsorption (28.6 kJ mol(-1) ), which can be competitive with some nitrogen-rich networks. Therefore, these microporous polymers are promising candidates for carbon dioxide capture.

High-Performance Small Molecule/Polymer Ternary Organic Solar Cells Based on a Layer-By-Layer Process.

The layer-by-layer process method, which had been used to fabricate a bilayer or bulk heterojunction organic solar cell, was developed to fabricate highly efficient ternary blend solar cells in which small molecules and polymers act as two donors. The active layer could be formed by incorporating the small molecules into the polymer based active layer via a layer-by-layer method: the small molecules were first coated on the surface of poly(3,4-ethylenedioxy-thiophene):poly(styrenesulfonate) ( PEDOT: PSS), and then the mixed solution of polymer and fullerene derivative was spin-coated on top of a small molecule layer. In this method, the small molecules in crystalline state were effectively mixed in the active layer. Without further optimization of the morphology of the ternary blend, a high power conversion efficiency (PCE) of 8.76% was obtained with large short-circuit current density (Jsc) (17.24 mA cm(-2)) and fill factor (FF) (0.696). The high PCE resulted from not only enhanced light harvesting but also more balanced charge transport by incorporating small molecules.

New benzo[1,2-b:4,5-b']dithiophene-based small molecules containing alkoxyphenyl side chains for high efficiency solution-processed organic solar cells.

A new acceptor-donor-acceptor (A-D-A) small molecule, namely, BDT-PO-DPP, based on the alkoxyphenyl (PO)-substituted benzo[1,2-b:4,5-b']dithiophene (BDT) derivative and the diketopyrrolopyrrole (DPP) unit was synthesized as an electron donor for solution-processed small-molecule organic solar cells (SMOSCs). BDT-PO-DPP exhibited good thermal stability, with a 5 % weight-lost temperature at 401 °C under a nitrogen atmosphere. BDT-PO-DPP exhibited a lower HOMO energy level of -5.25 eV and a weaker aggregation ability than alkoxy-substituted BDT-O-DPP. A bulk heterojunction SMOSC device based on BDT-PO-DPP and [6,6]-phenyl-C61 -butyric acid methyl ester was prepared, and it showed a power conversion efficiency up to 5.63% with a high open-circuit voltage of 0.83 V, a short circuit current density of 11.23 mA cm(-2) , and a fill factor of 60.37% by using 1,2-dichlorobenzene as the co-solvent after thermal annealing at 110 °C. The results indicate that the alkoxyphenyl-substituted BDT derivative is a promising electron-donor building block for constructing highly efficient solution-processed SMOSCs.

Development of new two-dimensional small molecules based on benzodifuran for efficient organic solar cells.

A new organic small molecule, DCA3TBDF, with a 2D benzo[1,2-b:4,5-b']difuran (BDF) moiety as the central core and octyl cyanoacetate units as the end-capped blocks, was designed and synthesized for solution-processed bulk heterojunction solar cells. DCA3TBDF possesses good solubility in common organic solvents such as toluene, CH2Cl2, chlorobenzene, and CHCl3 and good thermal stability with an onset decomposition temperature with 5% weight-loss occurring at 361 °C. The DCA3TBDF thin film showed a broad absorption at λ=320-700 nm and high crystallinity. Small-molecule organic solar cells based on DCA3TBDF and [6,6]-phenyl-C61-butyric acid methyl ester demonstrated promising power conversion efficiency with a high fill factor under the illumination of AM 1.5G (100 mW cm(-2)).