Temperature-Dependent Supramolecular Isomeric Co-CPs for Luminescence Recognition and Catalytic Oxidation.

Two Co-based supramolecular isomers were synthesized from a fluorinated carboxylic acid ligand under hydrothermal conditions at varying temperatures. Both exhibited similar one-dimensional chain structures while different bending connections of the aromatic rings led to different supramolecular structures, namely CoCP-1 and CoCP-2, respectively. The structural differences of two isomers resulted in discrepant performance with regards to luminescence sensing and catalysis. CoCP-1 demonstrated more significant luminescence quenching activity toward biomarkers 2,6-dipyridinoic acid (DPA) and high vanilloid acid (HVA), which could be distinguished in the presence of Eu3+. The limit of detection (LOD) was found to be as low as 3.4 and 1.3 µM, respectively. The recovery rate of for HVA and DPA was within the range of 89.6-101.2% and 99.7-117.9% in simulated urine and serum, respectively, indicating potential reliability in monitoring these two analytes in real samples. Notably, CoCP-2 exhibited catalytic activity for the oxidation of thioethers to sulfoxides. Our finding here suggests that the coordination conformation of the ligands within supramolecular isomers plays a pivotal role in determining the structure and luminescence sensing/catalysis performance.

Hierarchical Porous Carbon Supported Co2P2O7 Nanoparticles for Oxygen Evolution and Oxygen Reduction in a Rechargeable Zn-Air Battery.

The oxygen reduction/evolution reaction (ORR/OER) represents a pivotal process in metal-air batteries; however, it is constrained by the limitations of slow kinetics. Nevertheless, the creation of long-lasting and bifunctional catalysts represents a significant challenge. This study presents a series of hierarchical porous carbon-supported cobalt pyrophosphate (Co2P2O7-N/C-T) catalysts, prepared through the pyrolysis of porphyrin-based NTU-70 nanosheets with red phosphorus at varying temperatures. The Co2P2O7-N/C-800 not only demonstrates remarkable OER performance with an overpotential of only 290 mV at a current density of 10 mA cm-2 in 1 M KOH, but also exhibits an excellent ΔE of 0.74 V in 0.1 M KOH, which is lower than that of Pt/C + RuO2 (0.76 V). The utilization of Co2P2O7-N/C-800 as an air cathode in a rechargeable Zn-air battery (ZAB) results in a stable discharge voltage plateau of 1.405 V and a high gravimetric energy density of 801.2 mA h gZn-1. This work presents a promising strategy for the design of efficient bifunctional catalysts and demonstrates the critical importance of the interplay between the active center and the supported hierarchical porous carbon.

Tuning Multiple Counter-Anions in Porous Coordination Polymers with lcy Topology for Acetylene/Ethylene Separation.

The efficient separation of acetylene (C2H2) and ethylene (C2H4) is an important and complex process in the industry. Herein, we report a new family of lcy-topologic coordination frameworks (termed NTU-90 to NTU-92) with Cu3MF6 (M = Si, Ti, and Zr) nodes. These charged frameworks are compensated by different counterbalanced ions (MF62-, BF4-, and Cl-), yielding changes in the size of the window apertures. Among these frameworks, NTU-92-a (activated NTU-92) shows good adsorption selectivity of C2H2/C2H4 and also significant ability in recovering both highly pure C2H4 (99.95%) and C2H2 (99.98%). Our work not only presents a potential alternative for energy-saving purification of C2 hydrocarbons but also provides a new approach for tuning the function of charged porous materials.

Immobilization of Amino-site into a Pore-Partitioned Metal-Organic Framework for Highly Efficient Separation of Propyne/Propylene.

Adsorptive separation of propyne/propylene (C3H4/C3H6) is a crucial yet complex process, however, it remains a great difficulty in developing porous materials that can meet the requirements for practical applications, particularly with an exceptional ability to bind and store trace amounts of C3H4. Functionalization of pore-partitioned metal-organic frameworks (ppMOFs) is methodically suited for this challenge owing to the possibility of dramatically increasing binding sites on highly porous and confined domains. We here immobilized Lewis-basic (-NH2) and Lewis-acidic (-NO2) sites on this platform. Along with an integrated nature of high uptake of C3H4 at 1 kPa, high uptake difference of C3H4-C3H6, moderated binding strength, promoted kinetic selectivity, trapping effect and high stability, the NH2-decorated ppMOF (NTU-100-NH2) can efficiently produce polymer-grade C3H6 (99.95 %, 8.3 mmol ⋅ g-1) at room temperature, which is six times more than the NO2-decorated crystal (NTU-100-NO2). The in situ infrared spectroscopy, crystallographic analysis, and sequential blowing tests showed that the densely packed amino group in this highly porous system has a unique ability to recognize and stabilize C3H4 molecules. Moving forward, the strategy of organic functionalization can be extended to other porous systems, making it a powerful tool to customize advanced materials for challenging tasks.

Confining Water Nanotubes in a Cu10O13-Based Metal-Organic Framework for Propylene/Propane Separation with Record-High Selectivity.

Energy-efficient separation of propylene (C3H6)/propane (C3H8) is in high demand for the chemical industry. However, this process is challenging due to the imperceptible difference in molecular sizes of these gases. Here, we report a continuous water nanotube dedicatedly confined in a Cu10O13-based metal-organic framework (MOF) that can exclusively adsorb C3H6 over C3H8 with a record-high selectivity of 1570 (at 1 bar and 298 K) among all the porous materials. Such a high selectivity originates from a new mechanism of initial expansion and subsequent contraction of confined water nanotubes (∼4.5 Å) caused by C3H6 adsorption rather than C3H8. Such unique response was further confirmed by breakthrough measurements, in which one adsorption/desorption cycle yields each component of the binary mixture high purity (C3H6: 98.8%; C3H8: >99.5%) and good C3H6 productivity (1.6 mL mL-1). Additionally, benefiting from the high robustness of the framework, the water nanotubes can be facilely recovered by soaking the MOF in water, ensuring long-term use. The molecular insight here demonstrates that the confining strategy opens a new route for expanding the function of MOFs, particularly for the sole recognition from challenging mixtures.

Delicate Softness in a Temperature-Responsive Porous Crystal for Accelerated Sieving of Propylene/Propane.

Soft nanoporous crystals with structural dynamics are among the most exciting recently discovered materials. However, designing or controlling a porous system with delicate softness that can recognize similar gas pairs, particularly for the promoted ability at increased temperature, remains a challenge. Here, we report a soft crystal (NTU-68) with a one-dimensional (1D) channel that expands and contracts delicately around 4 Å at elevated temperature. The completely different adsorption processes of propane (C3H8: kinetic dominance) and propylene (C3H6: thermodynamic preference) allow the crystal to show a sieving separation of this mixtures (9.9 min·g-1) at 273 K, and the performance increases more than 2-fold (20.4 min·g-1) at 298 K. This phenomenon is contrary to the general observation for adsorption separation: the higher the temperature, the lower the efficiency. Gas-loaded in situ powder X-ray analysis and modeling calculations reveal that slight pore expansion caused by the increased temperature provides plausible nanochannel for adsorption of the relatively smaller C3H6 while maintaining constriction on the larger C3H8. In addition, the separation process remains unaffected by the general impurities, demonstrating its true potential as an alternative sorbent for practical applications. Moving forward, the delicate crystal dynamics and promoted capability for molecular recognition provide a new route for the design of next-generation sieve materials.

Polycrystalline Metal-Organic Framework Membranes for Separation of Light Hydrocarbons.

Due to facile designability and versatile nanospace, metal-organic frameworks (MOFs) have been considered as promising membrane materials. Compared to the mixed matrix membranes that incorporated with MOF particles, the polycrystalline MOF membranes demonstrates significant advantages in maximum utilizing the crystalline nanospace, and thus yielding a fruitful of achievements in the last twenty years. Although some reviews have summarized the development of MOF-based membranes, the theoretical framework for oriented design and preparation of polycrystalline MOF membranes for highly efficient separation of light hydrocarbons remains in infancy. Herein, in this review, the fabrication strategies of polycrystalline MOF membranes and the corresponding performance in the separation of light hydrocarbons were classified and summarized. Particularly, the MOF membranes with global and local dynamics have been proposed as an interesting topic promoted performance.

Synergistic Catalysis of Cobalt Tetroxide and Bamboo-Shaped Carbon Nanotubes Doped with Nitrogen for Oxygen Reduction in Zn-Air Batteries.

Zinc-air batteries (ZABs) have been considered as one of the most emerging systems for energy conversion and storage. However, the preparation of highly efficient oxygen reduction reaction (ORR) catalysts on an air cathode is still faced with significant challenges. Herein, we report a secondary nitrogen source strategy for fine-tuning the active center, which provides a carbon-based hierarchical porous catalyst (termed Co3O4@N/CNT-1000) for highly efficient ORR activity (E1/2 = 0.87 V, JL = 5.32 mA cm-2, and Eonset = 1.021 V) and excellent stability. Controlled experiments demonstrate that such high activity derives from the synergistic effect of cobalt tetroxide and bamboo-shaped carbon nanotubes doped with nitrogen, prepared by the pyrolysis of a two-dimensional metal-organic framework nanosheet (termed NTU-70) and melamine. Furthermore, the ZAB assembled with Co3O4@N/CNT-1000 displays high specific capacity (854 mA h g-1Zn) and power density (179 mW cm-2), excellent long-term cycling (330 h), and durable charging/discharging ability.

Molecular Sieving of Propyne/Propylene by a Scalable Nanoporous Crystal with Confined Rotational Shutters.

Soft porous coordination polymers (PCPs) have the remarkable ability to recognize similar molecules as a result of their structural dynamics. However, their guest-induced gate-opening behaviors often lead to issues with selectivity and separation efficiency, as co-adsorption is nearly unavoidable. Herein, we report a strategy of a confined-rotational shutter, in which the rotation of pyridyl rings within the confined nanospace of a halogen-bonded coordination framework (NTU-88) creates a maximum aperture of 4.4 Å, which is very close to the molecular size of propyne (C3 H4 : 4.4 Å), but smaller than that of propylene (C3 H6 : 5.4 Å). This has been evidenced by crystallographic analyses and modelling calculations. The NTU-88o (open phase of activated NTU-88) demonstrates dedicated C3 H4 adsorption, and thereby leads to a sieving separation of C3 H4 /C3 H6 under ambient conditions. The integrated nature of high uptake ratio, considerable capacity, scalable synthesis, and good stability make NTU-88 a promising candidate for the feasible removal of C3 H4 from C3 H4 /C3 H6 mixtures. In principle, this strategy holds high potential for extension to soft families, making it a powerful tool for optimizing materials that can tackle challenging separations with no co-adsorption, while retaining the crucial aspect of high capacity.

Metal-Organic Framework Nanoparticles with Universal Dispersibility through Crown Ether Surface Coordination for Phase-Transfer Catalysis and Separation Membranes.

Dispersing metal-organic framework (MOF) solids in stable colloids is crucial for their availability and processibility. Herein, we report a crown ether surface coordination approach for functionalizing the surface-exposed metal sites of MOF particles with amphiphilic carboxylated crown ether (CEC ). The surface-bound crown ethers significantly improve MOF solvation without compromising the accessible voids. We demonstrate that CEC -coated MOFs exhibit exceptional colloidal dispersibility and stability in 11 distinct solvents and six polymer matrices with a wide range of polarities. The MOF-CEC can be instantaneously suspended in immiscible two-phase solvents as an effective phase-transfer catalyst and can form various uniform membranes with enhanced adsorption and separation performance, which highlights the effectiveness of crown ether coating.

Double-Walled Zn36@Zn104 Multicomponent Senary Metal-Organic Polyhedral Framework and Its Isoreticular Evolution.

Metal-organic polyhedral frameworks are attractive in gas storage and separation due to large voids with windows that can serve as traps for guest molecules. Introducing multivariant/multicomponent functionalities in them are ways of improving performances for certain targets. The high compatibility of organic linkers can generate multivariant MOFs, but by far, the diversity of secondary building units (SBUs) in a single metal-organic framework is still limited (no more than two in most cases). Here we report a new double-walled Zn36@Zn104 metal-organic polyhedral framework (HHU-8) with five types of topologically distinct SBUs and its isoreticular evolution to the Zn36@Zn136 counterpart (HHU-8s). Both MOFs are the first to be constructed with such high numbers of topologically distinct SBUs as well as topologically distinct nodes, and their formation and evolution provide new insight into SBU's controllability.

Finely Tuned Framework Isomers for Highly Efficient C2H2 and CO2 Separation.

Obtaining the optimal physiadsorbents based on the same starting materials is one of the crucial technologies that can address the increasing problem of energy-consuming separation. Herein, a group of porous coordination isomers (NTU-51 to NTU-54) with topologies of sql, dia, nbo, and kgm has been newly designed and prepared from a 4-c square node (paddlewheel cluster) and a 2-c linker (isophthalic acid derivative). Pure gas measurements revealed that they have a varied ability for selective C2H2 capture from C2H2/CO2 mixtures, originating from the fine arrangement of functional sites within these isomers as well as size-exclusive effects. Further dynamic breakthrough experiments exhibited good C2H2/CO2 (1/1, v/v) separation performance of the two isomers (NTU-53 and NTU-54) in both dry and humid gas phases (R.H. = 45%). More interestingly, stability tests and long-term measurements demonstrated a high potential of them to be used under realistic conditions.

Tuning Gate-Opening of a Flexible Metal-Organic Framework for Ternary Gas Sieving Separation.

In comparison with the fast development of binary mixture separations, ternary mixture separations are significantly more difficult and have rarely been realized by a single material. Herein, a new strategy of tuning the gate-opening pressure of flexible MOFs is developed to tackle such a challenge. As demonstrated by a flexible framework NTU-65, the gate-opening pressure of ethylene (C2 H4 ), acetylene (C2 H2 ), and carbon dioxide (CO2 ) can be regulated by temperature. Therefore, efficient sieving separation of this ternary mixture was realized. Under optimized temperature, NTU-65 adsorbed a large amount of C2 H2 and CO2 through gate-opening and only negligible amount of C2 H4 . Breakthrough experiments demonstrated that this material can simultaneously capture C2 H2 and CO2 , yielding polymer-grade (>99.99 %) C2 H4 from single breakthrough separation.

Pure-Supramolecular-Linker Approach to Highly Connected Metal-Organic Frameworks for CO2 Capture.

A pure-supramolecular-linker (PSL) approach for the formation of metal-organic frameworks (MOFs) was initially given, which was demonstrated by syntheses of two highly connected and isostructural MOFs, {Fe3O(TPBTM6-)(Cl)(H2O)2}∞ (TPBTM = N,N',N″-tris(isophthalyl)-1,3,5-benzenetricarboxamide) (NJU-Bai52, NJU-Bai for Nanjing University Bai group) and {Sc3O(TPBTM6-)(OH)(H2O)2}∞ (NJU-Bai53). Very interestingly, they exhibit exceptional thermal stability, water stability, and highly selective CO2 capture properties. In particular, NJU-Bai53 with higher uptakes (2.74 wt % at 0.4 mbar and 298 K, 7.67 wt % at 298 K and 0.15 bar) and higher selectivity may be an excellent candidate for CO2 capture.

Finely Tuned Porous Coordination Polymers To Boost Methane Separation Efficiency.

Absorbents with high breakthrough efficiency and weak host-guest interaction are considered to be promising candidates for an energy-saving process in feasible pressure/volume swing adsorption (PSA/VSA). Herein, two groups of finely designed Fe- and Co-based porous coordination polymers (PCPs) are proposed and validated; these possess hourglass-shaped nanochannels, through the cooperation of T-shaped ligands with shifted methyl groups. Featuring optimal nanochannels, high static adsorption, and relatively lower binding energy, one of these polymers, named NTU-30, enables significant C2 H6 /CH4 and C2 H4 /CH4 breakthrough efficiency, with approximately 1.0 or 0.6 g CH4 (100 %) harvested from the corresponding mixtures using 1 g of sample at ambient temperature. Furthermore, the positive effect of aromatic sites within NTU-30 is detected and investigated through an in situ IR study.

Interplay of Tri- and Bidentate Linkers to Evolve Micropore Environment in a Family of Quasi-3D and 3D Porous Coordination Polymers for Highly Selective CO2 Capture.

In the design and construction of porous materials, these with exceptional structure and composition are often highly expected, as they may offer unique nanopore space for desired applications. Here, a new family of quasi-3D and a 3D porous coordination polymers (PCPs) (termed NTU-43 to NTU-50) were constructed via an evolution strategy from a layered structure (termed NTU-42). Single gas adsorption isotherms of CO2, N2, and CH4 display the dependency of gas capacity on optimized effects of pore size, functionality, and charged framework of these quasi-3D PCPs, where NTU-45 and NTU-46, the two with NH2-BDC and OH-BDC bidentate linkers (NH2-BDC = 2-aminoterephthalic acid and OH-BDC = 2-hydroxyterephthalic acid) have demonstrated outstanding ability for selective CO2 uptake. To the best of our knowledge, this is the first time to well explore the synergistic effects toward gas adsorption on a platform of quasi-3D frameworks. More importantly, the efficient CO2 capture from CO2/CH4 and CO2/N2 mixtures has been also validated by breakthrough experiments under continuous and dynamic conditions at 298 K.

Higher Symmetry Multinuclear Clusters of Metal-Organic Frameworks for Highly Selective CO2 Capture.

A new approach of finely tuning multinuclear clusters of metal-organic frameworks (MOFs) through symmetry-upgradingly isoreticular transformation was first presented and a bcu-type MOF, {[Cu4(µ4-O)Cl2(IN)4][CuCl2]}∞ (NJU-Bai35; NJU-Bai for Nanjing University Bai group), with cluster [Cu4(µ4-O)Cl2(COO)4N4] of higher symmetry compared to the pristine MOF, was successfully synthesized. The symmetry upgrading implemented on the inorganic part triggers the adjustment of channels in NJU-Bai35 to fit CO2 molecules, leading to a high CO2 adsorption capacity (7.20 wt % at ∼0.15 bar and 298 K) and high selectivity of CO2 over N2 and CH4 (275.8 for CO2/N2 and 11.6 for CO2/CH4) in NJU-Bai35. Breakthrough experiments further confirmed that NJU-Bai35 might be an excellent candidate for CO2 capture and natural gas purification.

Finely Controlled Stepwise Engineering of Pore Environments and Mechanistic Elucidation of Water-Stable, Flexible 2D Porous Coordination Polymers.

Two porous coordination polymers (PCPs) with different topologies (NTU-19: sql and NTU-20: dia) underwent finely controlled, stepwise crystal conversions to yield a common water-stable, flexible 2D framework (NTU-22: kgm). The crystal conversions occurred directly at higher temperature via the 3D intermediate (NTU-21: nbo), which could be observed at lower temperature. The successful isolation of the intermediate product of NTU-21, characterization with in situ PXRD and UV/Vis spectra were combined with DFT calculations to allow an understanding of the dynamic processes at the atomic level. Remarkably, breakthrough experiments demonstrate NTU-22 with integral structural properties allowed significant CO2 /CH4 mixture separation.

A Free Tetrazolyl Decorated Metal-Organic Framework Exhibiting High and Selective CO2 Adsorption.

In this work, we employed a new tetrazolyl-functionalized ligand, 5-(1H-tetrazole-5-yl)-1,3-bis(3,5-dicarboxylphenyl)-benzene (H5TBDPB), and successfully obtained an example of incorporating free tetrazolyl groups in transition-metal-based MOFs based upon an ideal MOF platform. With a BET surface area of 2070 m2 g-1, this new tetrazolyl-decorated MOF [Cu6(TBDPB)3(H2O)6]·9DMF·15H2O (HHU-5, HHU for Hohai University) exhibits a high CO2 adsorption capacity of 37.1 wt % at 1 bar and 273 K and high CO2 separation capacity toward N2 and CH4 as well.

Density Gradation of Open Metal Sites in the Mesospace of Porous Coordination Polymers.

The prevalence of the condensed phase, interpenetration, and fragility of mesoporous coordination polymers (meso-PCPs) featuring dense open metal sites (OMSs) place strict limitations on their preparation, as revealed by experimental and theoretical reticular chemistry investigations. Herein, we propose a rational design of stabilized high-porosity meso-PCPs, employing a low-symmetry ligand in combination with the shortest linker, formic acid. The resulting dimeric clusters (PCP-31 and PCP-32) exhibit high surface areas, ultrahigh porosities, and high OMS densities (3.76 and 3.29 mmol g-1, respectively), enabling highly selective and effective separation of C2H2 from C2H2/CO2 mixtures at 298 K, as verified by binding energy (BE) and electrostatic potentials (ESP) calculations.