RESUMO
Non-Newtonian nanofluids present outstanding features in terms of energy transfer and conductivity with high application in numerous areas. In this work, non-Newtonian nanofluids based on carbon dots (Cdots) functionalized with ionic liquids (ILs) are developed. The nanofluids are produced using a simple, single-step method where the raw materials for the Cdots synthesis are glucose and waste biomass (chitin from crab shells). The use of ILs as both reaction media and functionalization molecules allows for the development of a new class of nanofluids, where the ILs on the Cdots surface represent the base-fluid. Here, the well-known benign IL 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) and a novel home-made IL (1-tosylate-3-methyl-imidazolium triflate) [Tmi][Trif] are used. The nanofluids obtained from both substrates show, apart from high conductivity and viscosity, light absorption, and good wettability, an appealing thermal sensitivity behavior. This thermal sensitivity is preserved even when applied as thin films on glass slides and can be boosted using the surface plasmon resonance effect. The results reported demonstrate that the new Cdots/IL-based nanofluids constitute a versatile and cost-effective route for achieving high-performance thermosensitive non-Newtonian sustainable nanofluids with tremendous potential for the energy coatings sector and heat transfer film systems.
Assuntos
Líquidos Iônicos , Carbono , Condutividade Elétrica , Imidazóis , ViscosidadeRESUMO
In this work, we report a new chemiluminescence system using bis-(2,4,6-trichlorophenyl) oxalate (TCPO) with hydrogen peroxide and luminol as fluorophore. The intense chemiluminescence reaction here described was fully investigated and it was determined that this fluorescent system has two strong light emissions at 440 and 490 nm, respectively. This new, user friendly, intense and striking light emission chemiluminescence system can be used as a very usefull tool for the design and construction of fluorescencent chemical sensors.
RESUMO
The present study describes an efficient method for the determination of polyphenol content in beverages based on a composite material of graphene oxide decorated with Prussian blue nanocubes (rGO/PBNCs). In this method, rGO/PBNCs act as a nanoenzyme with peroxidase-like catalytic activity and produce a colorimetric product in the presence of hydrogen peroxide and tetramethylbenzidine (TMB). To verify the effectiveness of the method, we used two model standards for antioxidants: gallic acid (GA) and tannic acid (TA). The method validation included a comparison of the performance of a natural enzyme and an artificial one (rGO/PBNCs) and two polyphenols in the analysis of commercial beverage samples. After optimization, a pH of 4, ambient temperature (22 °C), a reaction time of 2 minutes and an rGO/PBNCs concentration of 0.01 µg mL-1 were found to be the most favorable conditions. The detection limits obtained were 5.6 µmol L-1 for GA and 1.5 µmol L-1 for TA. Overall, rGO/PBNCs offer advantages over natural enzymes in terms of stability, versatility, scalability and durability, making them attractive candidates for a wide range of catalytic and sensory applications.
Assuntos
Bebidas , Ferrocianetos , Grafite , Polifenóis , Polifenóis/análise , Polifenóis/química , Ferrocianetos/química , Grafite/química , Bebidas/análise , Colorimetria/métodos , Limite de Detecção , Peroxidase/química , Ácido Gálico/química , Ácido Gálico/análise , Taninos/química , Taninos/análise , Peróxido de Hidrogênio/química , Benzidinas/química , Antioxidantes/química , Antioxidantes/análiseRESUMO
In the search to understand how evolution builds new traits, ancient events are often the hardest to dissect. Species-unique traits pose a particular challenge for geneticists-cases in which a character arose long ago and, in the modern day, is conserved within a species, distinguishing it from reproductively isolated relatives. In this work, we have developed the budding yeast genus Kluyveromyces as a model for mechanistic dissection of trait variation across species boundaries. Phenotypic profiling revealed robust heat and chemical-stress tolerance phenotypes that distinguished the compost yeast K. marxianus from the rest of the clade. We used culture-based, transcriptomic, and genetic approaches to characterize the metabolic requirements of the K. marxianus trait syndrome. We then generated a population-genomic resource for K. marxianus and harnessed it in molecular-evolution analyses, which found hundreds of housekeeping genes with evidence for adaptive protein variation unique to this species. Our data support a model in which, in the distant past, K. marxianus underwent a vastly complex remodeling of its proteome to achieve stress resistance. Such a polygenic architecture, involving nucleotide-level allelic variation on a massive scale, is consistent with theoretical models of the mechanisms of long-term adaptation, and suggests principles of broad relevance for interspecies trait genetics.
RESUMO
In the last years, a rising trend of pollen allergies in urban areas has been attributed to atmospheric pollution. In this work, we investigated the effects of SO(2) and NO(2) on the protein content, allergenicity, and germination rate of Acer negundo pollen. A novel environmental chamber was assembled to exposure pollen samples with SO(2) or NO(2) at two different levels: just below and two times the atmospheric hour-limit value acceptable for human health protection in Europe. Results showed that protein content was lower in SO(2)-exposed pollen samples and slightly higher in NO(2)-exposed pollen compared to the control sample. No different polypeptide profiles were revealed by SDS-PAGE between exposed and nonexposed pollen, but the immunodetection assays indicated higher IgE recognition by all sera of sensitized patients to Acer negundo pollen extracts in all exposed samples in comparison to the nonexposed samples. A decrease in the germination rate of exposed in contrast to nonexposed pollen was verified, which was more pronounced for NO(2)-exposed samples. Our results indicated that in urban areas, concentrations of SO(2) and NO(2) below the limits established for human protection can indirectly aggravate pollen allergy on predisposed individuals and affect plant reproduction.
Assuntos
Acer , Poluentes Atmosféricos/toxicidade , Dióxido de Nitrogênio/toxicidade , Pólen/efeitos dos fármacos , Dióxido de Enxofre/toxicidade , Acer/fisiologia , Alérgenos/fisiologia , Germinação/efeitos dos fármacos , Humanos , Hipersensibilidade Imediata/sangue , Hipersensibilidade Imediata/imunologia , Imunoglobulina E/sangue , Imunoglobulina E/imunologia , Proteínas de Plantas/metabolismo , Pólen/crescimento & desenvolvimento , Pólen/imunologiaRESUMO
Three sets of Carbon Dots (Cdots) were produced through the carbohydrates acid thermal decomposition method. These nanoparticles were functionalized with a polymer, known for its biological compatibility: polyethylene glycol, PEG200, and folic acid, FA, a biomolecule associated with the reactive oxygen and nitrogen (ROS/RNS) savaging process, thus resulting CdotsPEG200, CdotsPEG200FA and CdotsFA. These nanoparticles were tested as nitric oxide radical (NO·) sensors and it was determined that CdotsPEG200FA and CdotsFA fluorescence intensity was quenched by the presence of this radical specie. Moreover, according to the Benesi-Hilderbrand plot, the nanoparticles have a high affinity towards the analyte and this interaction is consistent with a 1:1 stoichiometry, through an independent mechanism. The Stern-Volmer constant, obtained for both sensing systems, is compatible with the formation of stable complexes (static quenching) between the Folic Acid residues on the Cdots surface and NO·. The detection and quantification limits along with the sensitivity were calculated for both nanoparticles: DL (31.7 ± 0.02) x 10-9, QL (96.29 ± 0.01) x 10-9, Sensitivity (5.2 ± 0.5) x 109 M for CdotsFA and DL (83 ± 3) x 10-10, QL (251 ± 2) x 10-10, Sensitivity (8.4 ± 0.3) x 1010 M. These values are adequate for biological sensing and are quite competitive with other reported nanosensors for NO· detection and quantification.
Assuntos
Carbono , Nanopartículas , Carbono/química , Ácido Fólico , Nanopartículas/química , Oxigênio/química , Espécies Reativas de NitrogênioRESUMO
The pressing need to develop a specific analytical sensor that can identify and quantify Fe(II) without a cytotoxic response was the major motivation drive in this work. The turn-on fluorescent sensor here described can successfully detect Fe(II) and discriminate this ion from other analytes that commonly act as interferents in biological media. Moreover, this reduced fluoresceinamine-based sensor has a high photostability and high dissociation constant, which is an indication that the complex obtained between reduced fluoresceinamine (RFL) and Fe(II) is highly stable. This fluorescence-based sensor has a binding mechanism of 1:1 and a positive cooperativity was found between analyte and sensor. The detection, quantification and sensitivity parameters of the sensor were determined: 21.6 ± 0.1 µM; 65.6 ± 0.1 µM and 48 ± 3 (×107) µM, respectively. To evaluate a possible cytotoxicity effect an erythrocyte assay was performed and the obtained data were evaluated considering CdTe Quantum Dots (QDs) passivated with mercaptoacetic acid has experimental control. According to the resulting data RFL is not cytotoxic even when used in high concentrations, 660 mM. On the other hand QDs are quite different. Indeed it was proven that these heavy metal-based nanoparticles are responsible for 40% erytrocytes hemolysis in concentrations of 600 mM.
Assuntos
Compostos de Cádmio , Pontos Quânticos , Compostos Ferrosos , Corantes Fluorescentes , Ferro , Pontos Quânticos/toxicidade , Espectrometria de Fluorescência , TelúrioRESUMO
A new fluorescent sensor for nitric oxide (NO) is presented that is based on its reaction with a non fluorescent substance, reduced fluoresceinamine, producing the highly fluorescent fluoresceinamine. Using a portable homemade stabilized light source consisting of 450 nm LED and fiber optics to guide the light, the sensor responds linearly within seconds in the NO concentration range between about 10-750 µM with a limit of detection (LOD) of about 1 µM. The system generated precise intensity readings, with a relative standard deviation of less than 1%. The suitability of the sensor was assessed by monitoring the NO generated by either the nitrous acid decomposition reaction or from a NO-releasing compound. Using relatively high incubation times, the sensor also responds quantitatively to hydrogen peroxide and potassium superoxide, however, using transient signal measurements results in no interfering species.
Assuntos
Técnicas Biossensoriais/métodos , Fluoresceínas/química , Óxido Nítrico/análise , Técnicas Biossensoriais/instrumentação , Tecnologia de Fibra Óptica/instrumentação , Corantes Fluorescentes/química , Hidrazinas/química , Peróxido de Hidrogênio/química , Limite de Detecção , Modelos Lineares , Reprodutibilidade dos Testes , Superóxidos/químicaRESUMO
We report within this paper the development of a fiber-optic based sensor for Hg(II) ions. Fluorescent carbon nanoparticles were synthesized by laser ablation and functionalized with PEG(200) and N-acetyl-L-cysteine so they can be anionic in nature. This characteristic facilitated their deposition by the layer-by-layer assembly method into thin alternating films along with a cationic polyelectrolyte, poly(ethyleneimine). Such films could be immobilized onto the tip of a glass optical fiber, allowing the construction of an optical fluorescence sensor. When immobilized on the fiber-optic tip, the resultant sensor was capable of selectively detecting sub-micromolar concentrations of Hg(II) with an increased sensitivity compared to carbon dot solutions. The fluorescence of the carbon dots was quenched by up to 44% by Hg(II) ions and interference from other metal ions was minimal.
Assuntos
Carbono/química , Cátions Bivalentes/análise , Corantes Fluorescentes/química , Mercúrio/análise , Nanopartículas/química , Fibras Ópticas , Acetilcisteína/química , Nanopartículas/ultraestrutura , Sensibilidade e Especificidade , Espectrometria de Fluorescência/métodosRESUMO
An optical fiber sensor for Hg(II) in aqueous solution based on sol-gel immobilized carbon dots nanoparticles functionalized with PEG(200) and N-acetyl-L-cysteine is described. This sol-gel method generated a thin (about 750 nm), homogenous and smooth (roughness of 2.7±0.7 Å) film that immobilizes the carbon dots and allows reversible sensing of Hg(II) in aqueous solution. A fast (less than 10 s), reversible and stable (the fluorescence intensity measurements oscillate less than 1% after several calibration cycles) sensor system was obtained. The sensor allow the detection of submicron molar concentrations of Hg(II) in aqueous solution. The fluorescence intensity of the immobilized carbon dots is quenched by the presence of Hg(II) with a Stern-Volmer constant (pH=6.8) of 5.3×10(5) M(-1).