RESUMO
Organometallic complexes are frequently deposited on solid surfaces, but little is known about how the resulting complex-solid interactions alter their properties. Here, a series of complexes of the type Cu(dppf)(Lx)+ (dppf = 1,1'-bis(diphenylphosphino)ferrocene, Lx = mono- and bidentate ligands) were synthesized, physisorbed, ion-exchanged, or covalently immobilized on solid surfaces and investigated by 31P MAS NMR spectroscopy. Complexes adsorbed on silica interacted weakly and were stable, while adsorption on acidic γ-Al2O3 resulted in slow complex decomposition. Ion exchange into mesoporous Na-[Al]SBA-15 resulted in magnetic inequivalence of 31P nuclei verified by 31P-31P RFDR and 1H-31P FSLG HETCOR. DFT calculations verified that a MeCN ligand dissociates upon ion exchange. Covalent immobilization via organic linkers as well as ion exchange with bidentate ligands both lead to rigidly bound complexes that cause broad 31P CSA tensors. We thus demonstrate how the interactions between complexes and functional surfaces determine and alter the stability of complexes. The applied Cu(dppf)(Lx)+ complex family members are identified as suitable solid-state NMR probes for investigating the influence of support surfaces on deposited inorganic complexes.
RESUMO
Crystal size is a key parameter of zeolites applied as catalysts. Herein, ZSM-5 crystals with similar physicochemical and acid properties, few defects, and aluminum exclusively in tetrahedral coordination are synthesized and the influence of the crystal size on the MTO and ETA conversion is investigated. Short olefins are the main products of the MTO conversion, whereas larger olefins and aromatics dominate the products after ETA conversion. In the case of both feeds, an increased crystal size decreases the catalyst's lifetime. The MTO conversion over larger ZSM-5 altered the product distribution, which was not the case for the ETA conversion. The reason is that the instantly available aromatics during ETA conversion lead to fast coking and zeolite crystals only active in the outer layers. Thus, the different reactivity of different-sized ZSM-5 is direct proof of a different conversion mechanism for both alcohols.
RESUMO
We compare three methods for quantitatively distinguishing the location of noble metal (NM) particles in mesopores from those found on the external support surface. MCM-41 and SBA-15 with NM located in mesopores or on the external surface were prepared and characterized by TEM. 31 P MAS NMR spectroscopy was used to quantify arylphosphines in complexes with NM. Phosphine/NM ratios drop from 2.0 to 0.2 when increasing the probe diameter from 1.08 to 1.54â nm. The reaction between NM and triphenylphosphine (TPP) within 3.0â nm MCM-41 pores takes due to confinement effects multiple weeks. In contrast, external NM react with TPP instantly. A promising method is filling the pores by using the pore volume impregnation technique with tetraethylorthosilicate (TEOS). TPP loading revealed that 66 % of NMs are located on the external surface of MCM-41. The pore filling method can be used in association with any probe molecule, also for the quantification of acid sites.
RESUMO
Ru/Al2 O3 is a highly stable, but less active catalyst for methanation reactions. Herein we report an effective approach to significantly improve its performance in the methanation of CO2 /H2 mixtures. Highly active and stable Ru/γ-Al2 O3 catalysts were prepared by high-temperature treatment in the reductive reaction gas. Operando/inâ situ spectroscopy and STEM imaging reveals that the strongly improved activity, by factors of 5 and 14 for CO and CO2 methanation, is accompanied by a flattening of the Ru nanoparticles and the formation of highly basic hydroxylated alumina sites. We propose a modification of the metal-support interactions (MSIs) as the origin of the increased activity, caused by modification of the Al2 O3 surface in the reductive atmosphere and an increased thermal mobility of the Ru nanoparticles, allowing their transfer to modified surface sites.
RESUMO
The synthesis of macrocycles is severely impeded by concomitant oligomer formation. Here, we present a biomimetic approach that utilizes spatial confinement to increase macrocyclization selectivity in the ring-closing metathesis of various dienes at elevated substrate concentration up to 25 mM using an olefin metathesis catalyst selectively immobilized inside ordered mesoporous silicas with defined pore diameters. By this approach, the ratio between macro(mono)cyclization (MMC) product and all undesired oligomerization products (O) resulting from acyclic diene metathesis polymerization was increased from 0.55, corresponding to 35% MMC product obtained with the homogeneous catalyst, up to 1.49, corresponding to 60% MMC product. A correlation between the MMC/O ratio and the substrate-to-pore-size ratio was successfully established. Modification of the inner pore surface with dimethoxydimethylsilane allowed fine-tuning the effective pore size and reversing surface polarity, which resulted in a further increase of the MMC/O ratio up to 2.2, corresponding to >68% MMC product. Molecular-level simulations in model pore geometries help to rationalize the complex interplay between spatial confinement, specific (substrate and product) interaction with the pore surface, and diffusive transport. These effects can be synergistically adjusted for optimum selectivity by suitable surface modification.
Assuntos
Alcenos/química , Compostos Macrocíclicos/síntese química , Alcenos/síntese química , Biomimética/métodos , Catálise , Técnicas de Química Sintética/métodos , Ciclização , Compostos Macrocíclicos/química , Modelos Moleculares , Polimerização , Porosidade , Rutênio/química , Dióxido de Silício/químicaRESUMO
The direct conversion of methane to methanol (MTM) is a reaction that has the potential to disrupt a great part of the synthesis gas-derived chemical industry. However, despite many decades of research, active enough catalysts and suitable processes for industrial application are still not available. Recently, several copper-exchanged zeolites have shown considerable activity and selectivity in the direct MTM reaction. Understanding the nature of the active site in these materials is essential for any further development in the field. Herein, we apply multivariate curve resolution analysis of X-ray absorption spectroscopy data to accurately quantify the fraction of active Cu in Cu-MOR (MOR = mordenite), allowing an unambiguous determination of the active site nuclearity as a dicopper site. By rationalizing the compositional parameters and reaction conditions, we achieve the highest methanol yield per Cu yet reported for MTM over Cu-zeolites, of 0.47 mol/mol.
RESUMO
Cu-exchanged zeolites possess active sites that are able to cleave the C-H bond of methane at temperatures ≤200 °C, enabling its selective partial oxidation to methanol. Herein we explore this process over Cu-SSZ-13 materials. We combine activity tests and X-ray absorption spectroscopy (XAS) to thoroughly investigate the influence of reaction parameters and material elemental composition on the productivity and Cu speciation during the key process steps. We find that the CuII moieties responsible for the conversion are formed in the presence of O2 and that high temperature together with prolonged activation time increases the population of such active sites. We evidence a linear correlation between the reducibility of the materials and their methanol productivity. By optimizing the process conditions and material composition, we are able to reach a methanol productivity as high as 0.2 mol CH3OH/mol Cu (125 µmol/g), the highest value reported to date for Cu-SSZ-13. Our results clearly demonstrate that high populations of 2Al Z2CuII sites in 6r, favored at low values of both Si:Al and Cu:Al ratios, inhibit the material performance by being inactive for the conversion. Z[CuIIOH] complexes, although shown to be inactive, are identified as the precursors to the methane-converting active sites. By critical examination of the reported catalytic and spectroscopic evidence, we propose different possible routes for active-site formation.
RESUMO
Experimental evidence for the presence of tert-butyl cations, which are important intermediates in acid-catalyzed heterogeneous reactions, on solid acids has still not been provided to date. By combining density functional theory (DFT) calculations with (1)H/(13)C magic-angle-spinning NMR spectroscopy, the tert-butyl cation was successfully identified on zeolite H-ZSM-5 upon conversion of isobutene by capturing this intermediate with ammonia.
RESUMO
Herein, we apply three different copper-exchanged materials (Na-[Al]SBA-15, silica, Na-MCM-22) as hosts for a direct synthesis of CuI(1,1'-bis(diphenylphosphino)ferrocene = dppf) complexes in cationic ion exchange position. Using 31P MAS NMR spectroscopy, we show that identical complexes as after ion exchange are generated if the solids are applied as reactants directly. The homogeneity of copper exchanges is evaluated by EDX spectroscopy. Both CuI and CuII result in the formation of complexes, thereby oxidizing dppf. Cu-particles were not reactive. Optimized conditions for a maximized complex formation are identified applying quantitative 31P MAS NMR spectroscopy and ICP-OES. Only accessible copper in cationic position of the solids forms the complexes. This enables a quantification of the amount of copper in mesopores vs. the total copper amount. Thus, besides a new synthesis of the complex a suitable method for quantitative elucidation of the location of copper cations is demonstrated herein.
RESUMO
Many Cu catalyzed ATRC reactions suffer from low catalyst activity and stability. We have synthesized five 1,10-phenanthroline ligands substituted in the 5-position with α-aminophosphonate groups, through which the corresponding Cu complexes can be immobilized on Al2O3. These catalysts show similar activity and higher selectivity than the homogenous catalysts while being recyclable.
RESUMO
As a commercial MTO catalyst, SAPO-34 zeolite exhibits excellent recyclability probably due to its intrinsic good hydrothermal stability. However, the structural dynamic changes of SAPO-34 catalyst induced by hydrocarbon pool (HP) species and the water formed during the MTO conversion as well as its long-term stability after continuous regenerations are rarely investigated and poorly understood. Herein, the dynamic changes of SAPO-34 framework during the MTO conversion were identified by 1D 27Al, 31P MAS NMR, and 2D 31P-27Al HETCOR NMR spectroscopy. The breakage of T-O-T bonds in SAPO-34 catalyst during long-term continuous regenerations in the MTO conversion could be efficiently suppressed by pre-coking. The combination of catalyst pre-coking and water co-feeding is established to be an efficient strategy to promote the catalytic efficiency and long-term stability of SAPO-34 catalysts in the commercial MTO processes, also sheds light on the development of other high stable zeolite catalyst in the commercial catalysis.
RESUMO
The active site in ethene oligomerization catalyzed by Ni-zeolites is proposed to be a mobile Ni(II) complex, based on density functional theory-based molecular dynamics (DFT-MD) simulations corroborated by continuous-flow experiments on Ni-SSZ-24 zeolite. The results of the simulations at operating conditions show that ethene molecules reversibly mobilize the active site as they exchange with the zeolite as ligands on Ni during reaction. Microkinetic modeling was conducted on the basis of free-energy profiles derived with DFT-MD for oligomerization on these mobile [(ethene)2-Ni-alkyl]+ species. The model reproduces the experimentally observed high selectivity to dimerization and indicates that the mechanism is consistent with the observed second-order rate dependence on ethene pressure.