Transdermal delivery of meloxicam using niosomal hydrogels: in vitro and pharmacodynamic evaluation.

Non-ionic surfactant vesicles were prepared using Span-60 and cholesterol in the mass ratios of 1:1, 2:1, 1:2 and 3:1 for transdermal delivery of an anti-inflammatory drug meloxicam (MXM). The drug encapsulation efficiencies and particle size were observed in the range of 32.9-80.7% and 56.5-133.4 nm, respectively. Three different gel bases were also prepared using Poloxamer-407, Chitosan and Carbopol-934 as polymers to study the performance of the in vitro release of the drug. Prepared gels were also converted into niosomal gels. In vitro release characteristics of MXM from different gels were carried out using dialysis membrane in phosphate buffer (pH 7.4). The poloxamer-407 gel or niosomal poloxamer-407 gel showed the superior drug release over the other formulations. The release data were treated with various mathematical models to assess the relevant parameters. The results showed that the release of MXM from the prepared gels and niosomal gels followed Higuchi's diffusion model. The flux of MXM was found to be independent on the viscosity of the formulations. The anti-inflammatory effects of MXM from different niosomal gel formulations were evaluated using carrageenan-induced rat paw edema method, which showed superiority of niosomal gels over conventional gels.

Liposomal gels for site-specific, sustained delivery of celecoxib: in vitro and in vivo evaluation.

The objective of this work was to evaluate liposome-containing gel formulations for the sustained, site-specific delivery of celecoxib (CXB). Liposomes composed of phosphadtidylcholine (and various amounts of cholesterol (Ch) were prepared using thin film hydration and characterized for encapsulation efficiency, vesicle size, and drug-excipient interaction using differential scanning calorimetry and Fourier-transform infrared spectroscopy. The selected liposome formulation was incorporated in different gel formulations: the Ch ratio affected the encapsulation efficiency of the drug, by increasing Ch ratio up until 1:1 the encapsulation efficiency increased. Further increasing the Ch ratio resulted in decreasing encapsulation efficiency. In vitro drug release and skin permeation studies showed sustained release and enhanced permeation compared with gel formulations containing free drug. In the rat paw edema test, the anti-inflammatory activity of the selected liposomal gel formulation was higher and more sustained compared with that of the nonliposomal gel formulation containing free drug. These results suggest that the liposome-containing gels are promising formulations for sustained, site-specific delivery of CXB.

Formulation of immediate release pellets containing famotidine solid dispersions.

Famotidine (FM) is a potent H2-receptor antagonist used for the treatment of peptic ulcer. It has a low and variable bioavailability which is attributed to its low water solubility. In this study, the dissolution of the drug was enhanced by a preparation of solid dispersion using two hydrophilic carriers, namely Gelucire 50/13 and Pluronic F-127. The prepared solid dispersions were characterized by differential scanning calorimetry (DSC), which indicated that there were no signs of interaction of the drug with the carriers used in the case of solid dispersions containing higher polymeric contents (1:3 and 1:5). FM solid dispersions in the matrices of Gelucire 50/13 and Pluronic F-127 (1:3) were used to prepare pellets. The scanning electron microscope (SEM) images of pellets showed that the pellets have spherical shape and their size depends on the carrier used. The dissolution of the drug from either solid dispersion or pellets was performed. The dissolution study depicted that, the presence of the drug in solid dispersion enhanced its dissolution in comparison with the drug itself. Also, the drug release from the manufactured pellets was found to be improved in the case of solid dispersions (drug:carrier 1:3). A complete drug release occurred after 30 min from pellets containing solid dispersions, while only about 30% of the loaded FM was released from pellets containing untreated drug after 2 h.

Effective loading of incompatible drugs into nanosized vesicles: a strategy to allow concurrent administration of furosemide and midazolam in simulated clinical settings.

The current study aims to assess the use of nanocarriers to limit drug incompatibilities in clinical settings, and thus eliminating serious clinical consequences (e.g., catheter obstruction and embolism), and enhancing in vivo bioavailability and efficacy. As a proof-of-concept, the impact of loading well-documented physically incompatible drugs (i.e., furosemide and midazolam) into nanosized vesicles on in vitro stability and in vivo bioavailability of the two drugs was investigated. Furosemide and midazolam were loaded into nanosized spherical vesicles at high entrapment efficiency (ca. 62-69%). The drug-loaded vesicles demonstrated a sustained drug release patterns, high physical stability and negligible hemolytic activity. Physical incompatibility was assessed by exploiting microscopic technique coupled with image processing and analysis, dynamic light scattering and laser Doppler anemometry. Incorporation of drugs separately inside the nanosized vesicles dramatically decreased size and number of the precipitated particles. In vivo, the niosomal drug mixture demonstrated a significant improvement in pharmacokinetic profiles of furosemide and midazolam compared to the mixed free drug solutions, as evidenced by their longer circulation half-lives and higher area under the plasma-concentration time curves of both drugs. Nanocarriers could provide an auspicious strategy for circumventing drug incompatibilities, thus reducing adverse reactions, hospitalization period and improving therapeutic outcomes.

Curcumin Transferosome-Loaded Thermosensitive Intranasal in situ Gel as Prospective Antiviral Therapy for SARS-Cov-2.

Purpose: Immunomodulatory and broad-spectrum antiviral activities have motivated the evaluation of curcumin for Coronavirus infection 2019 (COVID-19) management. Inadequate bioavailability is the main impediment to the therapeutic effects of oral Cur. This study aimed to develop an optimal curcumin transferosome-loaded thermosensitive in situ gel to improve its delivery to the lungs. Methods: Transferosomes were developed by using 33 screening layouts. The phospholipid concentration as well as the concentration and type of surfactant were considered independent variables. The entrapment efficiency (EE%), size, surface charge, and polydispersity index (PDI) were regarded as dependent factors. A cold technique was employed to develop thermosensitive in-situ gels. Optimized transferosomes were loaded onto the selected gels. The produced gel was assessed based on shape attributes, ex vivo permeability enhancement, and the safety of the nasal mucosa. The in vitro cytotoxicity, antiviral cytopathic effect, and plaque assay (CV/CPE/Plaque activity), and in vivo performance were evaluated after intranasal administration in experimental rabbits. Results: The optimized preparation displayed a particle size of 664.3 ± 69.3 nm, EE% of 82.8 ± 0.02%, ZP of -11.23 ± 2.5 mV, and PDI of 0.6 ± 0.03. The in vitro curcumin release from the optimized transferosomal gel was markedly improved compared with that of the free drug-loaded gel. An ex vivo permeation study revealed a significant improvement (2.58-fold) in drug permeability across nasal tissues of sheep. Histopathological screening confirmed the safety of these preparations. This formulation showed high antiviral activity against SARS-CoV-2 at reduced concentrations. High relative bioavailability (226.45%) was attained after the formula intranasally administered to rabbits compared to the free drug in-situ gel. The curcumin transferosome gel displayed a relatively high lung accumulation after intranasal administration. Conclusion: This study provides a promising formulation for the antiviral treatment of COVID-19 patients, which can be evaluated further in preclinical and clinical studies.

Stabilization and Movable Ligand-Modification by Folate-Appended Polyrotaxanes for Systemic Delivery of siRNA Polyplex.

To achieve a systemic targeted delivery of siRNA using polymeric carriers, there is a dilemma between ligand modification and stabilization of the polyplex. Namely, ligand modification often leads to destabilization of the polyplex in the blood circulation. In fact, we previously developed cyclodextrin (CD)/polyamidoamine dendrimer conjugates (CDE) as siRNA carriers, and the interaction of CDE/siRNA was decreased by the conjugation with folate-polyethylene glycol, leading to the destabilization. To overcome this dilemma, in this study, folate-appended polyrotaxanes (Fol-PRX) were developed. Fol-PRX stabilized CDE/siRNA polyplex by intermolecularly connecting CDE molecules through a host-guest interaction between adamantane at the terminals of Fol-PRX and ß-CD in the polyplex. Moreover, the intermolecular connection of the polyplex with Fol-PRX provided movable folate moieties on the surface. As a result, Fol-PRXs enhanced the in vivo antitumor activity of the polyplex after intravenous administration, suggesting their utility as the dual-functional materials for systemic delivery of siRNA polyplexes.

The use of spray-drying to enhance celecoxib solubility.

The present research investigates the enhancement of the dissolution rate of celecoxib by using spray-drying to prepare a solid dispersion with various polymers, namely Kollicoat IR® (Kollicoat), polyvinyl alcohol (PVA) 22000, or polyethylene glycol 6000 (PEG). The investigated drug-to-polymer mass ratios were 1:1, 1:2, and 1:4 by weight. Hydroalcoholic or methylene chloride solvent systems were used. The obtained yields ranged from 65% to 78%, whereas the entrapment efficiencies were between 68% and 82%. The results revealed an increase in the dissolution rate of the prepared particles up to 200% within 20 min. The prepared particles were investigated using differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. The increased dissolution rate was attributed to hydrogen bond formation between celecoxib and each polymer together with the reduced size of the formed particles offering a greater overall surface area. It was concluded that spray-drying may be considered a successful one-step technique to improve the dissolution rate of celecoxib when using Kollicoat, PVA, or PEG as the carrier polymer.

Betaxolol-loaded niosomes integrated within pH-sensitive in situ forming gel for management of glaucoma.

Blindness and impaired vision are considered as the most troublesome health conditions leading to significant socioeconomic strains. The current study focuses on development of nanoparticulate systems (i.e., niosomes) as drug vehicles to enhance the ocular availability of betaxolol hydrochloride for management of glaucoma. Betaxolol-loaded niosomes were further laden into pH-responsive in situ forming gels to further extend precorneal retention of the drug. The niosomes were evaluated in terms of vesicle size, morphology, size distribution, surface charge and encapsulation efficiency. The optimized niosomes, comprised of Span® 40 and cholesterol at a molar ratio of 4:1, displayed particle size of 332 ± 7 nm, zeta potential of -46 ± 1 mV, and encapsulation efficiency of 69 ± 5%. The optimal nanodispersion was then incorporated into a pH-triggered in situ forming gel comprised of Carbopol® 934P and hydroxyethyl cellulose. The formed gels were translucent, pseudoplastic, mucoadhesive, and displayed a sustained in vitro drug release pattern. Upon instillation of the betaxolol-loaded niosomal gel into rabbits' eyes, a prolonged intraocular pressure reduction and significant enhancement in the relative bioavailability of betaxolol (280 and 254.7%) in normal and glaucomatous rabbits, were attained compared to the marketed eye drops, respectively. Hence, the developed pH-triggered nanoparticulate gelling system might provide a promising carrier for ophthalmic drug delivery and for improved augmentation of glaucoma.

Effects of Kollicoat IR and hydroxypropyl-beta-cyclodextrin on the dissolution rate of omeprazole from its microparticles and enteric-coated capsules.

Omeprazole microparticles were prepared by different drying techniques using Kollicoat IR nd hydroxypropyl-beta-cyclodextrin hydrophilic polymers. Physico-chemical properties were investigated using differential scanning calorimetry and powder X-ray diffractometry. Dissolution rate was determined and compared to the physical mixtures and the morphology was studied using a scanning electron microscope. Omeprazole transformed from the crystalline state to the amorphous state as confirmed by the disappearance of its melting peak and the characteristic of the crystalline peaks. Omeprazole dissolution rate was enhanced significantly from its spray- and freeze-dried microparticles as compared to the corresponding physical mixtures and drug alone (P < 0.05). F3 and F5 formula possessed superior release rate over other formulations. In acidic medium, the release of drug from enteric-coated capsules was not detectable, while it is completely released within 40 min after changing dissolution medium to phosphate buffer (pH 7.4). The transformation of OME from crystalline to amorphous state by using either Kollicoat IR or hydroxylpropyl-beta-cyclodextrin is considered a promising way to improvement of drug dissolution.

Preparation and investigation of acetyl salicylic acid-caffeine complex for rectal administration.

An acetyl salicylic acid-caffeine complex was prepared and evaluated for the potential use in rectal administration. The results revealed the formation of a complex between acetyl salicylic acid and caffeine in a 1:1 molar ratio by a charge transfer mechanism. The effects of acetyl salicylic acid and complex on the rectal tissues showed destruction in the mucosal epithelium in case of acetyl salicylic acid; however, no change in the rectal tissues was noticed upon the administration of the complex. The effect of suppository bases on the release of the complex was studied using Witepsol H15 as fatty base and polyethylene glycols (PEG) 1000 and 4000 as a water soluble suppository base. The release profiles of acetyl salicylic acid and the complex were faster from PEG than from that of Witepsol H15. The percent release for the complex and acetyl salicylic acid from PEG base were 45.8, and 34.9%, respectively. However, it was 8.7 and 7.8%, respectively, from Witepsol H15 fatty base. The release kinetic was found to follow the non-Fickian diffusion model for complex from the suppository bases. It was concluded that acetyl salicylic acid caffeine complex can be used safely for rectal administration.

Electrospun vancomycin-loaded nanofibers for management of methicillin-resistant Staphylococcus aureus-induced skin infections.

Skin damage exposes the underlying layers to bacterial invasion, leading to skin and soft tissue infections. Several pathogens have developed resistance against conventional topical antimicrobial treatments and rendered them less effective. Recently, several nanomedical strategies have emerged as a potential approach to improve therapeutic outcomes of treating bacterial skin infections. In the current study, nanofibers were utilized for topical delivery of the antimicrobial drug vancomycin and evaluated as a promising tool for treatment of topical skin infections. Vancomycin-loaded nanofibers were prepared via electrospinning technique, and vancomycin-loaded nanofibers of the optimal composition exhibited nanosized uniform smooth fibers (ca. 200 nm diameter), high drug entrapment efficiency and sustained drug release patterns over 48 h. In vitro cytotoxicity assays, using several cell lines, revealed the biocompatibility of the drug-loaded nanofibers. In vitro antibacterial studies showed sustained antibacterial activity of the vancomycin-loaded nanofibers against methicillin-resistant Staphylococcus aureus (MRSA), in comparison to the free drug. The nanofibers were then tested in animal model of superficial MRSA skin infection and demonstrated a superior antibacterial efficiency, as compared to animals treated with the free vancomycin solution. Hence, nanofibers might provide an efficient nanodevice to overcome MRSA-induced skin infections and a promising topical delivery vehicle for antimicrobial drugs.

Validated high-performance liquid chromatographic technique for determination of 5-fluorouracil: applications to stability studies and simulated colonic media.

A simple isocratic stability-indicating high-performance liquid chromatographic method with UV detection using thymine as an internal standard is developed. The method is validated and the degradation products are determined. The method is applied for the assessment of the stability of 5-fluorouracil in rat caecal content as a simulated colon medium under anaerobic conditions. The drug decomposes under acidic, alkaline, thermal, and oxidative stress. The drug is highly susceptible to acidic, alkaline, and oxidative hydrolysis as compared to alkaline conditions. Separation of the drug from major and minor degradation products is successfully achieved on a C(18) analytical, micro-bondapak column. The detection wavelength is 260 nm. The method is validated, and the response is found to be linear in the drug concentration range of 0.1-2.0 microg/mL. The high linearity of the standard calibration curve of 5-fluorouracil in the rat content is found to be R(2) = 0.998 in the concentration range from 0.5 to 5 microg/mL. No degradation occurred after incubation of 5-fluorouracil in the rat caecal contents. The standard deviation and coefficient of variation values for intra- and inter-day precision study exhibit acceptable accuracy and precision data throughout the concentration range investigated.

Preparation and characterization of spironolactone-loaded gelucire microparticles using spray-drying technique.

The basic objectives of this study were to prepare and characterize solid dispersions of poorly soluble drug spironolactone (SP) using gelucire carriers by spray-drying technique. The properties of the microparticles produced were studied by differential scanning calorimetry (DSC), scanning electron microscopy, saturation solubility, encapsulation efficiency, and dissolution studies. The absence of SP peaks in DSC profiles of microparticles suggests the transformation of crystalline SP into an amorphous form. The in vitro dissolution test showed a significant increase in the dissolution rate of microparticles as compared with pure SP and physical mixtures (PMs) of drug with gelucire carriers. Therefore, the dissolution rate of poorly water-soluble drug SP can be significantly enhanced by the preparation of solid dispersion using spray-drying technique.

Preparation and investigation of acetyl salicylic acid-caffeine complex for rectal administration.

An acetyl salicylic acid-caffeine complex was prepared and evaluated for the potential use in rectal administration. The results revealed the formation of a complex between acetyl salicylic acid and caffeine in a 1:1 molar ratio by a charge transfer mechanism. The effects of acetyl salicylic acid and complex on the rectal tissues showed destruction in the mucosal epithelium in case of acetyl salicylic acid; however, no change in the rectal tissues was noticed upon the administration of the complex. The effect of suppository bases on the release of the complex was studied using Witepsol H15 as fatty base and polyethylene glycols (PEG) 1000 and 4000 as a water soluble suppository base. The release profiles of acetyl salicylic acid and the complex were faster from PEG than from that of Witepsol H15. The percent release for the complex and acetyl salicylic acid from PEG base were 45.8, and 34.9%, respectively. However, it was 8.7 and 7.8%, respectively, from Witepsol H15 fatty base. The release kinetic was found to follow the non-Fickian diffusion model for complex from the suppository bases. It was concluded that acetyl salicylic acid caffeine complex can be used safely for rectal administration.

Improvement of solubility and dissolution rate of indomethacin by solid dispersions in Gelucire 50/13 and PEG4000.

The aim of this study was to prepare and characterize solid dispersions of water insoluble non-steroidal anti-inflammatory drug, indomethacin (IND), with polyethylene glycol 4000 (PEG4000) and Gelucire 50/13 (Gelu.) for enhancing the dissolution rate of the drug. The solid dispersions (SDs) were prepared by hot melting method at 1:1, 1:2 and 1:4 drug to polymer ratios. Scanning electron microscopy (SEM), X-ray powder diffractometry (XRD) and differential scanning calorimetry (DSC) were used to examine the physical state of the drug. Furthermore, the solubility and the dissolution rate of the drug in its different systems were explored. The data from the XRD showed that the drug was still detectable in its solid state in all SDs of IND-Gelu. and disappeared in case of higher ratio of IND-PEG4000. DSC thermograms showed the significant change in melting peak of the IND when prepared as SDs suggesting the change in crystallinity of IND. The highest ratio of the polymer (1:4) enhanced the drug solubility about 4-folds or 3.5-folds in case of SDs of IND-PEG or IND-Gelu., respectively. An increased dissolution rate of IND at pH 1.2 and 7.4 was observed when the drug was dispersed in these carriers in form of physical mixtures (PMs) or SDs. IND released faster from the SDs than from the pure crystalline drug or the PMs. The dissolution rate of IND from its PMs or SDs increased with an increasing amount of polymer.

Preparation and comparative evaluation of sustained release metoclopramide hydrochloride matrix tablets.

Metoclopramide hydrochloride (MCP) is commonly used for the management of gastrointestinal disorders. Frequent administration and the undesired side effects (extra pyramidal symptoms) of the drug on the central nervous system due to the fluctuations of its plasma concentrations may lead to patient incompliance, and hence, improper therapy. Therefore, the present work will be devoted to formulate the drug in sustained release formulations. MCP was incorporated in 12 formulae containing different polymers and/or different polymer ratios. These polymers were hydroxypropylmethyl cellulose (HPMC), carboxymethylcellulose (CMC) and ethyl cellulose (EC). Sodium starch glycolate (SSG) was added to some formulae in different amounts in order to soften and/or disintegrate the tablets. Both direct compression and granulation techniques were used to prepare the tablets. The physical properties were found to be satisfactory for all the formulae. The dissolution profiles of the tablets were constructed using the change-over method. The drug release involved a combination of both diffusion and polymer-chain relaxation mechanisms. The time required to release 50% of MCP ranged from 1.2 to more than 8 h. Direct compression and dry granulation techniques produced sufficient sustaining of the drug release. However, the pellets made by wet granulation released MCP in about 2 h, i.e., pelletization spheronization technique was not effective in sustaining the drug.

A Self-Nanoemulsifying Drug Delivery System for Enhancing the Oral Bioavailability of Candesartan Cilexetil: Ex Vivo and In Vivo Evaluation.

The drug delivery of candesartan cilexetil encounters an obstacle of low absolute oral bioavailability which is attributed mainly to its low aqueous solubility and efflux by intestinal P-glycoprotein (P-gp) transporters. However, the extent of P-gp contribution in the reduced oral bioavailability of candesartan cilexetil is not clear. In this study, a previously developed candesartan cilexetil-loaded self-nanoemulsifying drug delivery system (SNEDDS) was evaluated for its ability to increase the drug oral bioavailability via the inhibition of intestinal P-gp transporters. Despite the developed SNEDDS showing P-gp inhibition activity, P-gp-mediated efflux was found to have a minor role in the reduced oral bioavailability of candesartan cilexetil. On the other hand, the high surfactant concentration used in SNEDDS formulation represents a major challenge toward their widespread application especially for chronically administered drugs. The designed acute and subacute toxicity studies revealed that the degree of intestinal mucosal damage decreases as the treatment period increases. The latter observation was attributed to the reversibility of surfactant-induced mucosal damage. Thus, the developed SNEDDS could be considered as a promising delivery system for enhancing the oral bioavailability of chronically administered drugs.

Self-emulsifying drug-delivery systems modulate P-glycoprotein activity: role of excipients and formulation aspects.

Self-emulsifying drug-delivery systems (SEDDS) have been widely employed to ameliorate the oral bioavailability of P-glycoprotein (P-gp) substrate drugs and to overcome multidrug resistance in cancer cells. However, the role of formulation aspects in the reduced P-gp activity is not fully understood. In this review, we first explore the role of various SEDDS excipients in the reduced P-gp activity with the main emphasis on the effective excipient concentration range for excipient-mediated modulation of P-gp activity and then we discuss the synergistic effect of various formulation aspects on the excipient-mediated modulation of P-gp activity. This review provides an approach to develop a rationally designed SEDDS to overcome P-gp-mediated drug efflux.

Nanostructured lipid carriers for improved oral delivery and prolonged antihyperlipidemic effect of simvastatin.

The purpose of the current study is to develop nanostructured lipid carriers (NLCs) for the delivery of the antihyperlipidemic drug simvastatin (SIM) to increase its extremely low oral bioavailability (<5%) and prolong its antihyperlipidemic effect. NLCs were prepared via emulsification-solvent evaporation technique followed by ultrasonication, and the effect of composition of the nanocarriers on the particle size, size distribution, surface charge, entrapment efficiency, drug release kinetics and physical stability was extensively studied. NLCs exhibited nanosized (<200nm) spherical morphologies with narrow size distribution and high drug entrapment efficiency (>75%), sustained drug release pattern, and negative surface charge (zeta potential of -35-40mV) that imparts sufficient electrostatic physical stability. When tested in vivo, SIM-NLCs of the optimal composition demonstrated improved and prolonged reduction in the total cholesterol and non-high density lipoprotein cholesterol levels, as compared to the drug suspension. After oral administration of a single dose of SIM-NLC, 4-fold increase in bioavailability was observed, as compared to the SIM suspension. Hence, NLCs might provide efficient nanodevices for the management of hyperlipidemia and promising drug delivery systems to enhance SIM oral bioavailability.

Role of self-emulsifying drug delivery systems in optimizing the oral delivery of hydrophilic macromolecules and reducing interindividual variability.

Self-emulsifying drug delivery systems (SEDDS) have been widely employed to improve the oral bioavailability of poorly soluble drugs. In the past few years, SEDDS were extensively investigated to overcome various barriers encountered in the oral delivery of hydrophilic macromolecules (e.g., protein/peptide therapeutics and plasmid DNA (pDNA)), as well as in lowering the effect of food on drugs' bioavailability. However, the main mechanism(s) by which SEDDS could achieve such promising effects remains not fully understood. This review summarizes the recent progress in the use of SEDDS for protecting protein therapeutics and/or pDNA against enzymatic degradation and increasing the oral bioavailability of various drug substances regardless of the dietary condition. Understanding the underlying mechanism(s) of such promising applications will aid in the future development of rationally designed SEDDS. Entrapment of hydrophilic macromolecules in the oil phase of the formed emulsion is critical for protection of the loaded cargoes against enzymatic degradation and the enhancement of oral bioavailability. On the other hand, drug administration as a preconcentrated solution in the SEDDS preconcentrate allows the process of drug absorption to occur independently of the dietary condition, and thus reducing interindividual variability that results from concomitant food intake.