Artificial Processive Catalytic Systems.

Processive catalysts remain attached to a substrate and perform multiple rounds of catalysis. They are abundant in nature. This review highlights artificial processive catalytic systems, which can be divided into (A) catalytic rings that move along a polymer chain, (B) catalytic pores that hold polymer chains and decompose them, (C) catalysts that remain attached to and move around a cyclic substrate via supramolecular interactions, and (D) anchored catalysts that remain in contact with a substrate via multiple catalytic interactions (see frontispiece).

Enantiodivergent Sulfoxidation Catalyzed by a Photoswitchable Iron Salen Phosphate Complex.

Here we describe a photoswitchable iron(III) salen phosphate catalyst, which is able to catalyze the enantiodivergent oxidation of prochiral aryl alkyl sulfides to chiral aryl alkyl sulfoxides. The stable (S)-axial isomer of the catalyst produced enantioenriched sulfoxides with the (R)-configuration in up to 75 % e.e., whereas the photoisomerized metastable (R)-axial isomer of the catalyst favored the formation of (S)-sulfoxides in up to 43 % e.e. The maximum Δe.e. value obtained in the enantiodivergent sulfoxidation was 118 %, which is identical to the maximum Δe.e. value that was measured in the enantiodivergent epoxidation of alkenes by a related recently described Mn1 catalyst. This iron-based catalyst broadens the scope of photoswitchable enantiodivergent catalysts and may be used in the future to develop a photoswitchable catalytic system that can write digital information on a polymer chain in the form chiral sulfoxide functions.

113Cd as a Probe in NMR Studies of Allosteric Host-Guest-Ligand Complexes of Porphyrin Cage Compounds.

Cadmium porphyrin cage compounds Cd1 and 113 Cd1 have been synthesized from the free base porphyrin cage derivative H21 and Cd(OAc)2 ⋅ 2 H2O or 113Cd(OAc)2 ⋅ 2 H2O, respectively. The compounds form allosteric complexes with the positively charged guests N,N'-dimethylimidazolium hexafluorophosphate (DMI) and N,N'-dimethylviologen dihexafluorophosphate (Me2V), which bind in the cavity of the cage, and tbupy, which coordinates as an axial ligand to the outside of the cage. In the presence of tbupy, the binding of DMI in Cd1 is enhanced by a factor of ∼31, while the presence of DMI or Me2V in the cavity of Cd1 enhances the binding of tbupy by factors of 55 and 85, respectively. The X-ray structures of the coordination complexes of Cd1 with acetone, acetonitrile, and pyridine, the host-guest complex of Cd1 with a bound viologen guest, and the ternary allosteric complex of Cd1 with a bound DMI guest and a coordinated tbupy ligand, were solved. These structures revealed relocations of the cadmium center in and out of the porphyrin plane, depending on whether a guest or a ligand is present. 113Cd NMR could be employed as a tool to quantify the binding of guests and ligands to 113 Cd1. 1D EXSY experiments on the ternary allosteric system Cd1-tbupy-Me2V revealed that the coordination of tbupy significantly slowed down the dissociation of the Me2V guest. Eyring plots of the dissociation process revealed that this kinetic allosteric effect is entropic in nature.

Mechanistic Studies on the Epoxidation of Alkenes by Macrocyclic Manganese Porphyrin Catalysts.

Macrocyclic metal porphyrin complexes can act as shape-selective catalysts mimicking the action of enzymes. To achieve enzyme-like reactivity, a mechanistic understanding of the reaction at the molecular level is needed. We report a mechanistic study of alkene epoxidation by the oxidant iodosylbenzene, mediated by an achiral and a chiral manganese(V)oxo porphyrin cage complex. Both complexes convert a great variety of alkenes into epoxides in yields varying between 20-88 %. We monitored the process of the formation of the manganese(V)oxo complexes by oxygen transfer from iodosylbenzene to manganese(III) complexes and their reactivity by ion mobility mass spectrometry. The results show that in the case of the achiral cage complex the initial iodosylbenzene adduct is formed on the inside of the cage and in the case of the chiral one on the outside of the cage. Its decomposition leads to a manganese complex with the oxo ligand on either the inside or outside of the cage. These experimental results are confirmed by DFT calculations. The oxo ligand on the outside of the cage reacts faster with a substrate molecule than the oxo ligand on the inside. The results indicate how the catalytic activity of the macrocyclic porphyrin complex can be tuned and explain why the chiral porphyrin complex does not catalyze the enantioselective epoxidation of alkenes.

Allosteric Guest Binding in Chiral Zirconium(IV) Double Decker Porphyrin Cages.

Chiral zirconium(IV) double cage sandwich complex Zr(1)2 has been synthesized in one step from porphyrin cage H21. Zr(1)2 was obtained as a racemate, which was resolved by HPLC and the enantiomers were isolated in >99.5 % ee. Their absolute configurations were assigned on the basis of X-ray crystallography and circular dichroism spectroscopy. Vibrational circular dichroism (VCD) experiments on the enantiomers of Zr(1)2 revealed that the chirality around the zirconium center is propagated throughout the whole cage structure. The axial conformational chirality of the double cage complex displayed a VCD fingerprint similar to the one observed previously for a related chiral cage compound with planar and point chirality. Zr(1)2 shows fluorescence, which is quenched when viologen guests bind in its cavities. The binding of viologen and dihydroxybenzene derivatives in the two cavities of Zr(1)2 occurs with negative allostery, the cooperativity factors α (=4 K2/K1) being as low as 0.0076 for the binding of N,N'-dimethylviologen. These allosteric effects are attributed to a pinching of the second cavity as a result of guest binding in the first cavity.

Host-Guest Exchange of Viologen Guests in Porphyrin Cage Compounds as Studied by Selective Exchange Spectroscopy (1D EXSY) NMR.

Dynamics in complexes of porphyrin cage compounds and viologen-derived guest molecules are investigated by selective exchange NMR spectroscopy (1D EXSY). Exchange rates were found to be independent of excess guest concentration, revealing a dissociative exchange mechanism, which is accompanied by negative activation entropies, indicating significant reorganization of the host-guest complex during dissociation. Nonsymmetric viologen guests with bulky head groups had more unidirectional binding and slower exchange rates than guests with less-bulky head groups. Thermodynamic and kinetic studies revealed that the exchange process is primarily driven by the thermodynamics of binding and that guest binding can be influenced by introducing steric and electronic groups on the host . Exchange studies with guests bearing a polymer chain revealed that both slippage and full dissociation takes place and the rate constants for both processes were determined. The slippage rate constant revealed that for smaller guests exchange takes place nearly exclusively under thermodynamic control.

Double Porphyrin Cage Compounds.

The synthesis and characterization of double porphyrin cage compounds are described. They consist of two porphyrins that are each attached to a diphenylglycoluril-based clip molecule via four ethyleneoxy spacers, and are linked together by a single alkyl chain using "click"-chemistry. Following a newly developed multistep synthesis procedure we report three of these double porphyrin cages, linked by spacers of different lengths, i.e. 3, 5, and 11 carbon atoms. The structures of the double porphyrin cages were fully characterized by NMR, which revealed that they consist of mixtures of two diastereoisomers. Their zinc derivatives are capable of forming sandwich-like complexes with the ditopic ligand 1,4-diazabicyclo[2,2,2]octane (dabco).

Organothiol Monolayer Formation Directly on Muscovite Mica.

Organothiol monolayers on metal substrates (Au, Ag, Cu) and their use in a wide variety of applications have been extensively studied. Here, the growth of layers of organothiols directly onto muscovite mica is demonstrated using a simple procedure. Atomic force microscopy, surface X-ray diffraction, and vibrational sum-frequency generation IR spectroscopy studies revealed that organothiols with various functional endgroups could be self-assembled into (water) stable and adaptable ultra-flat organothiol monolayers over homogenous areas as large as 1 cm2 . The strength of the mica-organothiol interactions could be tuned by exchanging the potassium surface ions for copper ions. Several of these organothiol monolayers were subsequently used as a template for calcite growth.

Epitaxial Crystallization of Insulin on an Ordered 2D Polymer Template.

Two-dimensional polymers (2DP) are a new class of materials that consist of a monolayer of ordered molecular building blocks, which have been covalently linked. One of these monomers was self-assembled on a flat muscovite mica scaffold and subsequently the organic layer was polymerized. The resulting flat and stable 2DP layer was used as a template for protein crystallization. Crystals of insulin were epitaxially grown on the template, whereas insulin crystals grown on clean muscovite mica had a random orientation. The template was selective, considering that no epitaxially ordered crystals formed of hen egg white lysozyme, bovine serum albumin, or talin.

Effect of Chirality on the Binding of Viologen Guests in Porphyrin Macrocycles.

As part of a project aimed at the development of chiral processive catalysts that can write information on a polymer chain we describe the synthesis of two optically active porphyrin macrocycles, which are prepared in 3 steps from an achiral precursor compound. Fluorescence and 1H-NMR studies show that one of the macrocycles displays selectivity in the binding of chiral viologen guest molecules.

Self-Assembly of Covalently Linked Porphyrin Dimers at the Solid-Liquid Interface.

The synthesis and surface self-assembly behavior of two types of metal-porphyrin dimers is described. The first dimer type consists of two porphyrins linked via a rigid conjugated spacer, and the second type has an alkyne linker, which allows rotation of the porphyrin moieties with respect to each other. The conjugated dimers were equipped with two copper or two manganese centers, while the flexible dimers allowed a modular built-up that also made the incorporation of two different metal centers possible. The self-assembly of the new porphyrin dimers at a solid-liquid interface was investigated at the single-molecule scale using scanning tunneling microscopy (STM). All dimers formed monolayers, of which the stability and the internal degree of ordering of the molecules depended on the metal centers in the porphyrins. While in all monolayers the dimers were oriented coplanar with respect to the underlying surface ('face-on'), the flexible dimer containing a manganese and a copper center could be induced, via the application of a voltage pulse in the STM setup, to self-assemble into monolayers in which the porphyrin dimers adopted a non-common perpendicular ('edge-on') geometry with respect to the surface.

Cofactor Controlled Encapsulation of a Rhodium Hydroformylation Catalyst.

Supramolecular approaches in transition-metal catalysis, including catalyst encapsulation, have attracted considerable attention. Compared to enzymes, supramolecular catalysts in general are less complex. Enzyme activity is often controlled by the use of smaller cofactor molecules, which is important in order to control reactivity in complex mixtures of molecules. Interested in increasing complexity and allowing control over supramolecular catalyst formation in response to external stimuli, we designed a catalytic system that only forms an efficient supramolecular complex when a small cofactor molecule is added to the solution. This in turn affects both the activity and selectivity when applied in a hydroformylation reaction. This contribution shows that catalyst encapsulation can be controlled by the addition of a cofactor, which affects crucial catalyst properties.

A priori calculations of the free energy of formation from solution of polymorphic self-assembled monolayers.

Modern quantum chemical electronic structure methods typically applied to localized chemical bonding are developed to predict atomic structures and free energies for meso-tetraalkylporphyrin self-assembled monolayer (SAM) polymorph formation from organic solution on highly ordered pyrolytic graphite surfaces. Large polymorph-dependent dispersion-induced substrate-molecule interactions (e.g., -100 kcal mol(-1) to -150 kcal mol(-1) for tetratrisdecylporphyrin) are found to drive SAM formation, opposed nearly completely by large polymorph-dependent dispersion-induced solvent interactions (70-110 kcal mol(-1)) and entropy effects (25-40 kcal mol(-1) at 298 K) favoring dissolution. Dielectric continuum models of the solvent are used, facilitating consideration of many possible SAM polymorphs, along with quantum mechanical/molecular mechanical and dispersion-corrected density functional theory calculations. These predict and interpret newly measured and existing high-resolution scanning tunnelling microscopy images of SAM structure, rationalizing polymorph formation conditions. A wide range of molecular condensed matter properties at room temperature now appear suitable for prediction and analysis using electronic structure calculations.

A Bifunctional Electrocatalyst for Oxygen Evolution and Oxygen Reduction Reactions in Water.

Oxygen reduction and water oxidation are two key processes in fuel cell applications. The oxidation of water to dioxygen is a 4 H(+)/4 e(-) process, while oxygen can be fully reduced to water by a 4 e(-)/4 H(+) process or partially reduced by fewer electrons to reactive oxygen species such as H2O2 and O2(-). We demonstrate that a novel manganese corrole complex behaves as a bifunctional catalyst for both the electrocatalytic generation of dioxygen as well as the reduction of dioxygen in aqueous media. Furthermore, our combined kinetic, spectroscopic, and electrochemical study of manganese corroles adsorbed on different electrode materials (down to a submolecular level) reveals mechanistic details of the oxygen evolution and reduction processes.

Allosterically controlled threading of polymers through macrocyclic dimers.

As part of an ongoing study to construct a molecular Turing machine in which a polymer chain is encoded via allosteric information transfer between macrocyclic complexes, we describe the thermodynamic and kinetic characterization of a multicomponent self-assembled system based on a zinc porphyrin macrocyclic compound, a bidentate ligand (1,4-diazabicyclo[2.2.2]octane, DABCO), and a viologen-substituted polymer guest. Initial addition of DABCO to the porphyrin macrocycle in chloroform solution leads to the formation of a stable 2:1 (porphyrin:DABCO) dimeric complex, even under dilute conditions, by means of strong cooperative interactions involving hydrogen and metal-ligand bonds. Further titration of the porphyrin-DABCO mixtures with the polymer gives rise to a complex array of species in the solution. The system is analyzed in detail by a combination of spectroscopic measurements and computational modeling. Each association constant in the binding scheme and the fraction of each individual complex that is formed in solution are determined precisely using a mass-balance model. Kinetic studies revealed that the rates of the polymer threading and dethreading in and out of the dimeric system are remarkably slow, indicating that the polymer is locked inside the cavity of the stable 2:1 dimeric complex as a result of strong allosteric interactions.

Slippage of a porphyrin macrocycle over threads of varying bulkiness: implications for the mechanism of threading polymers through a macrocyclic ring.

Threading of a polymer through a macrocyclic ring may occur directly, that is, by finding the end of the polymer chain, or by a process in which the polymer chain first folds and then threads through the macrocyclic ring in a hairpin-like conformation. We present kinetic and thermodynamic studies on the threading of a macrocyclic porphyrin receptor (H2 1) onto molecular threads that are blocked on one side and are open on the other side. The open side is modified by groups that vary in ease of folding and in bulkiness. Additionally, the threads contain a viologen binding site for the macrocyclic receptor, which is located close to the blocking group. The rates of threading of H2 1 were measured under various conditions, by recording as a function of time the quenching of the fluorescence of the porphyrin, which occurs when receptor H2 1 reaches the viologen binding site. The kinetic data suggest that threading is impossible if the receptor encounters an open side that is sterically encumbered in a similar way as a folded polymer chain. This indicates that threading of polymers through macrocyclic compounds through a folded chain mechanism is unlikely.

Functional interlocked systems.

With the advent of supramolecular chemistry and later nanotechnology a great deal of research has been focused on new types of molecular structures, which are not held together by covalent bonds but by non-covalent mechanical interactions. Examples include the catenane, rotaxane, and knot interlocked structures. The design and synthesis of these architectures is an art by itself and as such is worth being reviewed. In this tutorial review we will focus, however, on the functional aspects of interlocked molecules and discuss how these can find applications, e.g. as artificial muscles, as molecular valves, as components of electronic devices, and as catalysts.

Designing processive catalytic systems. Threading polymers through a flexible macrocycle ring.

The translocation of polymers through pores is widely observed in nature and studying their mechanism may help understand the fundamental features of these processes. We describe here the mechanism of threading of a series of polymers through a flexible macrocyclic ring. Detailed kinetic studies show that the translocation speed is slower than the translocation speed through previously described more rigid macrocycles, most likely as a result of the wrapping of the macrocycle around the polymer chain. Temperature-dependent studies reveal that the threading rate increases on decreasing the temperature, resulting in a negative activation enthalpy of threading. The latter is related to the opening of the cavity of the macrocycle at lower temperatures, which facilitates binding. The translocation process along the polymer chain, on the other hand, is enthalpically unfavorable, which can be ascribed to the release of the tight binding of the macrocycle to the chain upon translocation. The combined kinetic and thermodynamic data are analyzed with our previously proposed consecutive-hopping model of threading. Our findings provide valuable insight into the translocation mechanism of macrocycles on polymers, which is of interest for the development of processive catalysts, i.e., catalysts that thread onto polymers and move along it while performing a catalytic action.

Tip-induced chemical manipulation of metal porphyrins at a liquid/solid interface.

Changing abruptly the potential between a scanning tunneling microscope tip and a graphite substrate induces "high-conductance" spots at the molecular level in a monolayer formed by a manganese chloride-porphyrin molecule. These events are attributed to the pulse-induced formation of µ-oxo-porphyrin dimers. The pulse voltage must pass a certain threshold for dimer formation, and pulse polarity determines the yield.

Strong induced-fit binding of viologen and pyridine derivatives in adjustable porphyrin cavities.

The synthesis and binding properties of new porphyrin cage compounds consisting of a rigid diphenylglycoluril part, which is connected via flexible bis(ethyleneoxy) spacers to a (metallo)porphyrin "roof", are reported. Binding of viologen guests and pyridine ligands in these porphyrin cages are accompanied by significant conformational reorganizations of the hosts. Despite these structural changes, association constants are still very high, revealing that not only receptors that bind guests according to a lock-and-key mechanism but also those that bind guests by an induced-fit mechanism can exhibit strong binding.