RESUMO
OBJECTIVES: Chronic obstructive pulmonary disease and silicosis are associated with exposure to crystalline silica. We determined the exposure to respirable crystalline silica and estimated exposure-response relationships between cumulative exposure and pulmonary function in outdoor rock drillers. METHODS: 136 rock drillers and 48 referents were recruited from three heavy construction companies. 98 air samples were collected by personal sampling for determination of respirable particulate matter and crystalline silica. Information about individual job tasks, type of drilling equipment and years of exposure in different job categories was obtained by interview. Cumulative exposure to crystalline silica was calculated for all workers. Pulmonary function was assessed by spirometry. A subgroup of 39 subjects with high cumulative exposure to crystalline silica underwent high-resolution computed tomography (HRCT). RESULTS: Cumulative exposure (mean (min-max)) to crystalline silica was 0.69 mgÙ years m-3 (0.01-5.89) in the exposed group. Mean time of exposure among rock drillers was 10.7 years (1-42). Compared with referents, the rock drillers had a lower forced expiratory volume in one second/forced vital capacity ratio (79.4 vs 81.4, p<0.05) and maximal mid-expiratory flow% (85.6 vs 93.9, p<0.05). Further, by stratifying the exposed workers into three equally large groups, a dose-response relationship was demonstrated in the highest exposed group, also in never smokers, at a mean cumulative exposure of 21.7 years at 0.08 mgÙ m-3/years. Silicosis was not detected in HRCT, but other patterns of fibrosis and emphysema were seen. CONCLUSIONS: Outdoor rock drillers exposed to crystalline silica had significantly lower pulmonary function than referents, and signs of airflow obstruction. Silicosis was not detected.
Assuntos
Pneumopatias Obstrutivas/diagnóstico por imagem , Pneumopatias Obstrutivas/fisiopatologia , Exposição Ocupacional/efeitos adversos , Dióxido de Silício/efeitos adversos , Adulto , Idoso , Indústria da Construção , Humanos , Masculino , Pessoa de Meia-Idade , Noruega/epidemiologia , Material Particulado/efeitos adversos , Fibrose Pulmonar , Testes de Função Respiratória , Silicose , Fumantes , Tomografia Computadorizada por Raios XRESUMO
OBJECTIVES: The aim of this study was to evaluate postural and rest tremor among workers using vibrating hand tools, taking into account the possible effects of toxicants such as alcohol and tobacco. A further aim was to study workers diagnosed with hand-arm vibration syndrome (HAVS) at the time of examination. METHODS: This study comprises 103 road maintenance workers, 55 exposed to vibrating hand tools (age 41.0 years; range 21-62) and 48 referents (age 38.5 years; range 19-64). They were examined with the CATSYS Tremor Pen®. Exposure to vibrating tools and serum biomarkers of alcohol and tobacco consumption were measured. RESULTS: Cumulative exposure to vibrating tools was associated with increased postural (p < 0.01) and rest tremor (p < 0.05) and with a higher Center Frequency of postural tremor (p < 0.01) among smokers and users of smokeless tobacco. Rest tremor Center Frequency was higher than postural tremor frequency (p < 0.001). CONCLUSIONS: The main findings indicate an association between cumulative exposure to hand-held vibrating tools, tremor parameters and consumption of tobacco products. The hand position is important when testing for tremor. Rest tremor had a higher Center Frequency. Postural tremor was more strongly associated with exposure than rest tremor. The finding of increased tremor among the HAVS subjects indicated that tremor might be a part of the clinical picture of a HAVS diagnosis. As with all cross-sectional studies, inferences should be made with caution when drawing conclusions about associations between exposure and possible effects. Future research using longitudinal design is required to validate the findings of the present study.
Assuntos
Indústria da Construção , Síndrome da Vibração do Segmento Mão-Braço/etiologia , Doenças Profissionais/etiologia , Exposição Ocupacional/efeitos adversos , Tremor/etiologia , Vibração/efeitos adversos , Adulto , Estudos Transversais , Humanos , Manutenção , Masculino , Pessoa de Meia-Idade , Adulto JovemRESUMO
OBJECTIVES: This study aimed to assess the exposure to a selection of aerosols and gases in the work environment for workers performing tunnel construction using tunnel boring machines (TBMs), to identify determinants of exposure based on the information available and to calculate robust estimates of exposure using a statistical model. The focus was particulate matter (PM) and respirable crystalline silica (RCS). In addition, concentrations of nitrogen dioxide (NO2), elemental carbon (EC), and oil mist were assessed. METHODS: Personal sampling was conducted from February 2017 to February 2019. PM in the thoracic and the respirable aerosol fractions was collected, and RCS was determined in the respirable aerosol fraction. Context information was collected on questionnaires. Because the workers could participate in the sampling more than once and multiple measurements were performed on the same date a mixed model was used in the analysis. Concentrations of PM and RCS are presented as estimated and measured geometric means (GMest and GMmea) and estimated arithmetic mean (AMest) in addition to the median. Measured concentrations of NO2, EC, and oil mist are presented as geometric means. RESULTS: A total of 290 and 289 personal samples of PM in the thoracic and respirable aerosol fractions were available for analysis, respectively. Work title/work location, type of work (production, maintenance, or a combination of the two), and date of sampling were identified as determinants of exposure. Workers in the front of the TBMs had the highest exposure to PM and RCS. The GMest of RCS exposure varied from 35 to 413 µg m-3 depending on the work title. The geometric standard deviations for measured RCS concentrations by work title ranged from 1.6 to 3.5. A total of 16 samples of NO2 and EC and 12 samples of oil mist were collected. Maximum values of NO2 and EC were 54 µg m-3 and 23 µg m-3, respectively. The maximum measured value of oil mist was 0.08 mg m-3. CONCLUSIONS: All TBM workers were exposed to PM and RCS. Exposure to RCS may be substantial, and workers in front of the TBM were exposed to the highest concentrations of both PM and RCS. A day-to-day variation was found, probably caused by differences in drilling activities. Preventive measures are warranted to keep the exposure to PM and consequently the exposure to RCS as low as possible to protect the health of workers in tunnel construction.
Assuntos
Poluentes Ocupacionais do Ar , Indústria da Construção , Exposição Ocupacional , Humanos , Exposição Ocupacional/análise , Material Particulado/análise , Poluentes Ocupacionais do Ar/análise , Dióxido de Nitrogênio/análise , Poeira/análise , Monitoramento Ambiental , Exposição por Inalação/análise , Dióxido de Silício/análise , Carbono/análise , Aerossóis/análiseRESUMO
Methods for measurements and the potential for occupational exposure to organophosphates (OPs) originating from turbine and hydraulic oils among flying personnel in the aviation industry are described. Different sampling methods were applied, including active within-day methods for OPs and VOCs, newly developed passive long-term sample methods (deposition of OPs to wipe surface areas and to activated charcoal cloths), and measurements of OPs in high-efficiency particulate air (HEPA) recirculation filters (n = 6). In total, 95 and 72 within-day OP and VOC samples, respectively, have been collected during 47 flights in six different models of turbine jet engine, propeller and helicopter aircrafts (n = 40). In general, the OP air levels from the within-day samples were low. The most relevant OP in this regard originating from turbine and engine oils, tricresyl phosphate (TCP), was detected in only 4% of the samples (min-max Assuntos
Poluentes Atmosféricos/análise
, Poluição do Ar em Ambientes Fechados/análise
, Aeronaves/estatística & dados numéricos
, Monitoramento Ambiental/métodos
, Compostos Organofosforados/análise
, Poluição do Ar em Ambientes Fechados/estatística & dados numéricos
RESUMO
This study describes the potential for occupational exposure to organophosphates (OPs) originating from turbine and hydraulic oils, among ground personnel within the aviation industry. The OPs tri-n-butyl phosphate (TnBP), dibutyl phenyl phosphate (DBPP), triphenyl phosphate (TPP) and tricresyl phosphate (TCP) have been emphasized due to their use in such oils. Oil aerosol/vapor and total volatile organic compounds (tVOCs) in air were also determined. In total, 228 and 182 OPs and oil aerosol/vapor samples from technician and loader work tasks during work on 42 and 21 aircrafts, respectively, were collected in pairs. In general, the measured exposure levels were below the limit of quantification (LOQ) for 84%/98% (oil aerosol) and 82%/90% (TCP) of the samples collected during technician/loader work tasks. The air concentration ranges for all samples related to technician work were Assuntos
Poluentes Atmosféricos/análise
, Aviação
, Exposição Ocupacional
, Descrição de Cargo
, Óleos
, Compostos Organofosforados