Neuromorphic responses of nanofluidic memristors in symmetric and asymmetric ionic solutions.

We show that ionic conduction properties of a multipore nanofluidic memristor can be controlled not only by the amplitude and frequency of an external driving signal but also by chemical gating based on the electrolyte concentration, presence of divalent and trivalent cations, and multi-ionic systems in single and mixed electrolytes. In addition, we describe the modulation of current rectification and hysteresis phenomena, together with neuromorphic conductance responses to voltage pulses, in symmetric and asymmetric external solutions. In our case, memristor conical pores act as nanofluidic diodes modulated by ionic solution characteristics due to the surface charge-regulated ionic transport. The above facts suggest potential sensing and actuating applications based on the conversion between ionic and electronic signals in bioelectrochemical hybrid circuits.

Electrical conductance of conical nanopores: Symmetric and asymmetric salts and their mixtures.

We have studied experimentally the electrical conductance-voltage curves of negatively and positively charged conical nanopores bathed in ionic solutions with monovalent, divalent, and trivalent cations at electrochemically and biologically relevant ionic concentrations. To better understand the interaction between the pore surface charge and the mobile ions, both single salts and salt mixtures have been considered. We have paid attention to the effects on the conductance of the cation valency, the pore charge asymmetry, and the pore charge inversion phenomena due to trivalent ions, both in single salts and salt mixtures. In addition, we have described how small concentrations of multivalent ions can tune the nanopore conductance due to monovalent majority ions, together with the effect of these charges on the additivity of ionic conductance and fluoride-induced negative differential conductance phenomena. This compilation and discussion of previously presented experimental data offers significant insights on the interaction between fixed and mobile charges confined in nanoscale volumes and should be useful in establishing and checking new models for describing ionic transport in the vicinity of charged surfaces.

Ultrasensitive and Selective Protein Recognition with Nanobody-Functionalized Synthetic Nanopores.

The development of flexible and reconfigurable sensors that can be readily tailored toward different molecular analytes constitutes a key goal and formidable challenge in biosensing. In this regard, synthetic nanopores have emerged as potent physical transducers to convert molecular interactions into electrical signals. Yet, systematic strategies to functionalize their surfaces with receptor proteins for the selective detection of molecular analytes remain scarce. Addressing these limitations, a general strategy is presented to immobilize nanobodies in a directional fashion onto the surface of track-etched nanopores exploiting copper-free click reactions and site-specific protein conjugation systems. The functional immobilization of three different nanobodies is demonstrated in ligand binding experiments with green fluorescent protein, mCherry, and α-amylase (α-Amy) serving as molecular analytes. Ligand binding is resolved using a combination of optical and electrical recordings displaying quantitative dose-response curves. Furthermore, a change in surface charge density is identified as the predominant molecular factor that underlies quantitative dose-responses for the three different protein analytes in nanoconfined geometries. The devised strategy should pave the way for the systematic functionalization of nanopore surfaces with biological receptors and their ability to detect a variety of analytes for diagnostic purposes.

Enhancement of heavy ion track-etching in polyimide membranes with organic solvents.

The effect of organic solvents on the ion track-etching of polyimide (PI) membranes is studied to enhance the nanopore fabrication process and the control over pore diameter growth. To this end, two approaches are employed to investigate the influence of organic solvents on the nanopore fabrication in PI membranes. In the first approach, the heavy ion irradiated PI samples are pretreated with organic solvents and then chemically etched with sodium hypochlorite (NaOCl) solution, resulting up to ∼4.4 times larger pore size compared to untreated ones. The second approach is based on a single-step track-etching process where the etchant (NaOCl) solution contains varying amounts of organic solvent (by vol%). The experimental data shows that a significant increase in both the bulk-etch and track-etch rates is observed by using the etchant mixture, which leads to ∼47% decrease in the nanopore fabrication time. This enhancement of nanopore fabrication process in PI membranes would open up new opportunities for their implementation in various potential applications.

Selective detection of preferential activity of Lanthanum ion at zinc oxide functionalized nanochannel.

A significant increase of rare earth transition metals concentration in water reservoirs caused by the dumping of household materials and petrol-producing industries is a potential threat to human and aquatic life. Here, we demonstrate a model nanofluidic channel for the Lanthanum (La3+) ions recognition. To this end, a single conical nanochannel is first modified with poly allylamine hydrochloride followed by immobilization of synthesized ZnO nanoparticles on the channel surface through electrostatic adsorption. A significant change in the nanopore electrical readout is noticed when the functionalized nanochannel is exposed to an electrolyte solution having La3+cations. The distinctive response by the nanofluidic system towards La3+ions is assumed to be due to ionic radii, hexagonal crystal structure, and associated basal plane interaction between anchored ZnO nanoparticles and La3+ions. We anticipate that this nanofluidic system can be used as a model to design highly sensitive metal ion detection devices.

Ultrasensitive and Selective Copper(II) Detection: Introducing a Bioinspired and Robust Sensor.

A nanopore-based CuII -sensing system is reported that allows for an ultrasensitive and selective detection of CuII with the possibility for a broad range of applications, for example in medical diagnostics. A fluorescent ATCUN-like peptide 5/6-FAM-Dap-ß-Ala-His is employed to selectively bind CuII ions in the presence of NiII and ZnII and was crafted into ion track-etched nanopores. Upon CuII binding the fluorescence of the peptide sensor is quenched, permitting the detection of CuII in solution. The ion transport characteristics of peptide-modified nanopore are shown to be extremely sensitive and selective towards CuII allowing to sense femtomolar CuII concentrations in human urine mimics. Washing with EDTA fully restores the CuII -binding properties of the sensor, enabling multiple repetitive measurements. The robustness of the system clearly has the potential to be further developed into an easy-to-use, lab-on-chip CuII -sensing device, which will be of great importance for bedside diagnosis and monitor of CuII levels in patients with copper-dysfunctional homeostasis.

Shape-Selective Electroless Plating within Expanding Template Pores: Etching-Assisted Deposition of Spiky Nickel Nanotube Networks.

Nano-objects are favored structures for applications such as catalysis and sensing. Although they already provide a large surface-to-volume ratio, this ratio can be further increased by shape-selective plating of the nanostructure surfaces. This process combines the conformity of autocatalytic deposition with the defined nucleation and growth characteristics of colloidal nanoparticle syntheses. However, many aspects of such reactions are still not fully understood. In this study, we investigate in detail the growth of spiky nickel nanotubes in polycarbonate template membranes. One distinctive feature of our synthesis is the simultaneous growth of nanospikes on both the inside and outside of nanotubes while the tubes are still embedded in the polymer. This is achieved by combining the plating process with locally enhanced in situ etching of the poylmer template, for which we propose a theory. Electron microscopy investigations reveal twinning defects as the driving force for the growth of crystalline nanospikes. Deposit crystallinity is ensured by the reducing agent hydrazine. Iminodiacetic acid is not only used as a complexing agent during synthesis but apparently also acts as a capping agent and limits random nucleation on the spike facets. Finally, we apply our synthesis to templates with interconnected pores to obtain free-standing spiky nickel nanotube networks, demonstrating its ability to homogeneously coat substrates with extended inner surfaces and to operate in nanoscale confinement.

Ionic circuitry with nanofluidic diodes.

Ionic circuits composed of nanopores functionalized with polyelectrolyte chains can operate in aqueous solutions, thus allowing the control of electrical signals and information processing in physiological environments. We demonstrate experimentally and theoretically that different orientations of single-pore membranes with the same and opposite surface charges can operate reliably in series, parallel, and mixed series-parallel arrangements of two, three, and four nanofluidic diodes using schemes similar to those of solid-state electronics. We consider also different experimental procedures to externally tune the fixed charges of the molecular chains functionalized on the pore surface, showing that single-pore membranes can be used efficiently in ionic circuitry with distinct ionic environments.

Electrical and thermal conductivities of polycrystalline platinum nanowires.

Understanding the electrical and thermal transport properties of polycrystalline metallic nanostructures is of great interest for applications in microelectronics. In view of the diverse experimental results in polycrystalline metallic nanowires and nanofilms, it is a long-standing question whether their electrical and thermal properties can be well predicted by a practical model. By eliminating the effects of electrical and thermal contact resistances, we measure the electrical and thermal conductivities of three different polycrystalline Pt nanowires. The electron scattering at the surface is found to be diffusive, and the charge reflection coefficient at grain boundaries is proved to be a function of the melting point. The Lorenz number is observed to be suppressed from the free-electron value by about 30%, which can be explained by introducing a thermal reflection coefficient in calculating the thermal conductivity to account for the small angle scattering effect involving phonons at the grain boundaries. Using this model, both the electrical and thermal conductivities of the polycrystalline Pt nanowires are calculated at different diameters and temperatures.

Lithium Ion Recognition with Nanofluidic Diodes through Host-Guest Complexation in Confined Geometries.

The lithium ion recognition is receiving significant attention because of its application in pharmaceuticals, lubricants and, especially, in energy technology. We present a nanofluidic device for specific lithium ion recognition via host-guest complexation in a confined environment. A lithium-selective receptor molecule, the aminoethyl-benzo-12-crown-4 (BC12C4-NH2), is designed and functionalized on single conical nanopores in polyethylene terephthalate (PET) membranes. The native carboxylic acid groups on the pore walls are covalently linked with the crown ether moieties and the process is monitored from the changes in the current-voltage ( I- V) curves. The B12-crown-4 moieties are known to specifically bind with lithium ions and when the modified pore is exposed to different alkali metal chloride solutions separately, significant changes in the ion current and rectification are only observed for lithium chloride. This fact suggests the generation of positively charged B12C4-Li+ complexes on the pore surface. Furthermore, the nanofluidic diode is able to recognize the lithium ion even in the presence of high concentrations of potassium ions in the external electrolyte solution. Thus, this nanodevice suggests a strategy to miniaturize nanofluidic porous systems for efficient recognition, extraction, and separation of lithium from raw materials.

Optimizing Energy Transduction of Fluctuating Signals with Nanofluidic Diodes and Load Capacitors.

The design and experimental implementation of hybrid circuits is considered allowing charge transfer and energy conversion between nanofluidic diodes in aqueous ionic solutions and conventional electronic elements such as capacitors. The fundamental concepts involved are reviewed for the case of fluctuating zero-average external potentials acting on single pore and multipore membranes. This problem is relevant to electrochemical energy conversion and storage, the stimulus-response characteristics of nanosensors and actuators, and the estimation of the accumulative effects caused by external signals on biological ion channels. Half-wave and full-wave voltage doublers and quadruplers can scale up the transduction between ionic and electronic signals. The network designs discussed here should be useful to convert the weak signals characteristic of the micro and nanoscale into robust electronic responses by interconnecting iontronics and electronic elements.

Cesium-Induced Ionic Conduction through a Single Nanofluidic Pore Modified with Calixcrown Moieties.

We demonstrate experimentally and theoretically a nanofluidic device for the selective recognition of the cesium ion by exploiting host-guest interactions inside confined geometry. For this purpose, a host molecule, i.e., the amine-terminated p-tert-butylcalix[4]arene-crown (t-BuC[4]C-NH2), is successfully synthesized and functionalized on the surface of a single conical nanopore fabricated in a poly(ethylene terephthalate) (PET) membrane through carbodiimide coupling chemistry. On exposure to the cesium cation, the t-BuC[4]C-Cs+ complex is formed through host-guest interaction, leading to the generation of positive fixed charges on the pore surface. The asymmetrical distribution of these groups along the conical nanopore leads to the electrical rectification observed in the current-voltage (I-V) curve. On the contrary, other alkali cations are not able to induce any significant change in the rectification characteristics of the nanopore. The success of the chemical modification is monitored from the changes in the electrical readout of the nanopore. Theoretical results based on the Nernst-Planck and Poisson equations further demonstrate the validity of the experimental approach to the cesium-induced ionic conduction of the nanopore.

Label-Free Pyrophosphate Recognition with Functionalized Asymmetric Nanopores.

The label-free detection of pyrophosphate (PPi) anions with a nanofluidic sensing device based on asymmetric nanopores is demonstrated. The pore surface is functionalized with zinc complexes based on two di(2-picolyl)amine [bis(DPA)] moieties using carbodiimide coupling chemistry. The complexation of zinc (Zn(2+) ) ion is achieved by exposing the modified pore to a solution of zinc chloride to form bis(Zn(2+) -DPA) complexes. The chemical functionalization is demonstrated by recording the changes in the observed current-voltage (I-V) curves before and after pore modification. The bis(Zn(2+) -DPA) complexes on the pore walls serve as recognition sites for pyrophosphate anion. The experimental results show that the proposed nanofluidic sensor has the ability to sense picomolar concentrations of PPi anion in the surrounding environment. On the contrary, it does not respond to other phosphate anions, including monohydrogen phosphate, dihydrogen phosphate, adenosine monophosphate, adenosine diphosphate, and adenosine triphosphate. The experimental results are described theoretically by using a model based on the Poisson-Nernst-Planck equations.

Transport properties of track-etched membranes having variable effective pore-lengths.

The transport rate of molecules through polymeric membranes is normally limited because of their micrometer-scale thickness which restricts their suitability for more practical application. To study the effect of effective pore length on the transport behavior, polymer membranes containing cylindrical and asymmetric-shaped nanopores were prepared through a two-step ion track-etching technique. Permeation experiments were performed separately to investigate the transport properties (molecular flux and selectivity) of these track-etched membranes. The permeation data shows that the molecular flux across membranes containing asymmetric nanopores is higher compared to those having cylindrical pores. On the other hand, the cylindrical pore membranes exhibit higher selectivity than asymmetric pores for the permeation of charged molecules across the membrane. Current-voltage (I-V) measurements of single-pore membranes further verify that asymmetric pores exhibit lower resistance for the flow of ions and therefore show higher currents than cylindrical pores. Moreover, unmodified and polyethyleneimine (PEI) modified asymmetric-shaped pore membranes were successfully used for the separation of cationic and anionic analyte molecules from their mixture, respectively. In this study, two distinct effects (pore geometry and pore density, i.e. number of pores cm(-2)), which mainly influence membrane selectivity and molecular transport rates, were thoroughly investigated in order to optimize the membrane performance. In this context, we believe that membranes with high molecular transport rates could readily find their application in molecular separation and controlled drug delivery processes.

Metal nanotubes and nanowires with rhombohedral cross-section electrolessly deposited in mica templates.

Electroless plating is a facile wet-chemical process for the creation of metal thin films on arbitrary substrates, which can be used to produce intricate nanomaterials. In this study, we demonstrate how nanotubes and nanowires can be electrolessly deposited in the rhombohedral pores of ion-track etched muscovite mica templates. Mutual optimization of the activation and plating reactions proved to be essential for the fabrication of well-defined nanostructures of an aspect ratio (length-to-diameter) of up to approximately 70. By repeating the activation procedure utilizing the redox couple Sn(II) and Ag(I), a high density of Ag nanoparticle seeds could be deposited on the template surface, which was required to initiate metal film nucleation with nanoscale homogeneity. Furthermore, it was necessary to adapt the plating reaction to ensure sufficient diffusion of the reagents into the depth of the template pores. To prove the flexibility of the process and to evaluate the effect of the intrinsic film morphology on the shape of the resulting nanostructures, three different plating reactions were applied (Ag, Au, Pt). If the size of the deposited metal particles approached the dimension of the template pores, only wire-like structures of moderate shape conformity were obtained. Electroless plating protocols which yield homogeneous deposits consisting of small nanoparticles allowed exact replication of the pore shape. Under consideration of the above-mentioned requirements, electroless plating displays an effective and versatile route toward the fabrication of parallel arrays of angular metal nanotubes and nanowires in the chemically and thermally robust mica templates. By simply immersing the templates in aqueous plating solutions for an appropriate time, well-defined metal nanomaterials for application in, for example, plasmonics, catalysis, or molecular separation are obtained.

Nondestructive and nonpreparative chemical nanometrology of internal material interfaces at tunable high information depths.

Improvement in the performance of functional nanoscaled devices involves novel materials, more complex structures, and advanced technological processes. The transitions to heavier elements and to thicker layers restrict access to the chemical and physical characterization of the internal material interfaces. Conventional nondestructive characterization techniques such as X-ray photoelectron spectroscopy suffer from sensitivity and quantification restrictions whereas destructive techniques such as ion mass spectrometry may modify the chemical properties of internal interfaces. Thus, novel methods providing sufficient sensitivity, reliable quantification, and high information depths to reveal interfacial parameters are needed for R&D challenges on the nanoscale. Measurement strategies adapted to nanoscaled samples enable the combination of Near-Edge X-ray Absorption Fine Structure and Grazing Incidence X-ray Fluorescence to allow for chemical nanometrology of internal material interfaces. Their validation has been performed at nanolayered model structures consisting of a silicon substrate, a physically vapor deposited Ni metal layer, and, on top, a chemically vapor deposited B(x)C(y)N(z) light element layer.

Nernst-Planck model of photo-triggered, pH-tunable ionic transport through nanopores functionalized with "caged" lysine chains.

We describe the fabrication of asymmetric nanopores sensitive to ultraviolet (UV) light, and give a detailed account of the divalent ionic transport through these pores using a theoretical model based on the Nernst-Planck equations. The pore surface is decorated with lysine chains having pH-sensitive (amine and carboxylic acid) moieties that are caged with photo-labile 4,5-dimethoxy-2-nitrobenzyl (NVOC) groups. The uncharged hydrophobic NVOC groups are removed using UV irradiation, leading to the generation of hydrophilic "uncaged" amphoteric groups on the pore surface. We demonstrate experimentally that polymer membranes containing single pore and arrays of asymmetric nanopores can be employed for the pH-controlled transport of ionic and molecular analytes. Comparison between theory and experiment allows for understanding the individual properties of the phototriggered nanopores, and provides also useful clues for the design and fabrication of multipore membranes to be used in practical applications.

Cation pumping against a concentration gradient in conical nanopores characterized by load capacitors.

We study the cation transport against an external concentration gradient (cation pumping) that occurs in conical nanopores when zero-average oscillatory and white noise potentials are externally applied. This pumping, based on the electrically asymmetric nanostructure, is characterized here by a load capacitor arrangement. In the case of white noise signals, the conical nanopore acts as an electrical valve that allows extraction of order from chaos. No molecular carriers, specific ion pumps, and competitive ion-binding phenomena are required. The nanopore conductance on/off states mimic those of the voltage-gated ion channels in the cell membrane. These channels allow modulating membrane potentials and ionic concentration gradients along oscillatory pulses in circadian rhythms and the cell cycle. We show that the combination of asymmetric nanostructures with load capacitors can be useful for the understanding of nanofluidic processes based on bioelectrochemical gradients.

Recycling of All-Solid-State Li-ion Batteries: A Case Study of the Separation of Individual Components Within a System Composed of LTO, LLZTO and NMC.

With the current global projection of over 130 million electric vehicles (EVs), there soon will be a need for battery waste management. Especially for all-solid-state lithium-ion batteries (lithium ASSBs), aspects of waste management and circular economy have not been addressed so far. Within such ASSBs, the use of solid-electrolytes like garnet-type Li6.5 La3 Zr1.5 Ta0.5 O12 (LLZTO) may shift focus on strategies to recover not only the transition metal elements but also elements like La/Zr/Ta. In this work, we present a two-step recycling approach using citric acid as the leaching agent to separate and recover the individual components of a model cell comprising of Li4 Ti5 O12 (LTO) anode, Li6.5 La3 Zr1.5 Ta0.5 O12 (LLZTO) garnet electrolyte and LiNi1/3 Mn1/3 Co1/3 O2 (NMC) cathode. We observe that by adjusting the concentration of citric acid, it was possible to separate the materials from each other without strong mixing of individual phases and also to maintain their principle performance characteristics. Thus, the process developed has a potential for upscaling and can guide towards considering separation capability of battery components in the development of lithium ASSBs.

Thermally controlled permeation of ionic molecules through synthetic nanopores functionalized with amine-terminated polymer brushes.

We present temperature-dependent ionic transport through an array of nanopores (cylindrical and conical) and a single conical nanopore functionalized with amine-terminated poly(N-isopropylacrylamide) [PNIPAAM-NH2] brushes. For this purpose, nanopores are fabricated in heavy ion irradiated polyethylene terephthlate (PET) membranes by a controlled chemical track-etching technique, which leads to the generation of carboxyl (COOH) groups on the pore surface. End-functionalized polymer chains are immobilized onto the inner pore walls via a 'grafting-to' approach through the covalent linkage of surface COOH moieties with the terminal amine groups of the PNIPAAM molecules by using carbodiimide coupling chemistry. The success of the chemical modification reaction is corroborated by measuring the permeation flux of charged analytes across the multipore membranes in an aqueous solution, and for the case of single conical pore by measuring the current-voltage (I-V) characteristics, which are dictated by the electrostatic interaction of the charged pore surface with the mobile ions in an electrolyte solution. The effective nanopore diameter is tuned by manipulating the environmental temperature due to the swelling/shrinking behaviour of polymer brushes attached to the inner nanopore walls, leading to a decrease/increase in the ionic transport across the membrane. This process should permit the thermal gating and controlled release of ionic drug molecules through the nanopores modified with thermoresponsive polymer chains across the membrane.