Cleaning Up without Messing Up: Maximizing the Benefits of Plastic Clean-Up Technologies through New Regulatory Approaches.

As the global plastics crisis grows, numerous technologies have been invented and implemented to recover plastic pollution from the environment. Although laudable, unregulated clean-up technologies may be inefficient and have unintended negative consequences on ecosystems, for example, through bycatch or removal of organic matter important for ecosystem functions. Despite these concerns, plastic clean-up technologies can play an important role in reducing litter in the environment. As the United Nations Environment Assembly is moving toward an international, legally binding treaty to address plastic pollution by 2024, the implementation of plastic clean-up technologies should be regulated to secure their net benefits and avoid unintended damages. Regulation can require environmental impact assessments and life cycle analysis to be conducted predeployment on a case-by-case basis to determine their effectiveness and impact and secure environmentally sound management. During operations catch-efficiency and bycatch of nonlitter items, as well as waste management of recovered litter, should be documented. Data collection for monitoring, research, and outreach to mitigate plastic pollution is recommended as added value of implementation of clean-up technologies.

Global producer responsibility for plastic pollution.

Brand names can be used to hold plastic companies accountable for their items found polluting the environment. We used data from a 5-year (2018-2022) worldwide (84 countries) program to identify brands found on plastic items in the environment through 1576 audit events. We found that 50% of items were unbranded, calling for mandated producer reporting. The top five brands globally were The Coca-Cola Company (11%), PepsiCo (5%), Nestlé (3%), Danone (3%), and Altria (2%), accounting for 24% of the total branded count, and 56 companies accounted for more than 50%. There was a clear and strong log-log linear relationship production (%) = pollution (%) between companies' annual production of plastic and their branded plastic pollution, with food and beverage companies being disproportionately large polluters. Phasing out single-use and short-lived plastic products by the largest polluters would greatly reduce global plastic pollution.

Monitor compartments, mitigate sectors: A framework to deconstruct the complexity of plastic pollution.

The rapid growth in science, media, policymaking, and corporate action aimed at "solving" plastic pollution has revealed an overwhelming complexity, which can lead to paralysis, inaction, or a reliance on downstream mitigations. Plastic use is diverse - varied polymers, product and packaging design, pathways to the environment, and impacts - therefore there is no silver bullet solution. Policies addressing plastic pollution as a single phenomenon respond to this complexity with greater reliance on downstream mitigations, like recycling and cleanup. Here, we present a framework of dividing plastic use in society into sectors, which can be used to disentangle the complexity of plastic pollution and direct attention to upstream design for the circular economy. Monitoring plastic pollution in environmental compartments will continue to provide feedback on mitigations, but with a sector framework, scientists, industry, and policymakers can begin to shape actions to curb the harmful impacts of plastic pollution at the source.

A growing plastic smog, now estimated to be over 170 trillion plastic particles afloat in the world's oceans-Urgent solutions required.

As global awareness, science, and policy interventions for plastic escalate, institutions around the world are seeking preventative strategies. Central to this is the need for precise global time series of plastic pollution with which we can assess whether implemented policies are effective, but at present we lack these data. To address this need, we used previously published and new data on floating ocean plastics (n = 11,777 stations) to create a global time-series that estimates the average counts and mass of small plastics in the ocean surface layer from 1979 to 2019. Today's global abundance is estimated at approximately 82-358 trillion plastic particles weighing 1.1-4.9 million tonnes. We observed no clear detectable trend until 1990, a fluctuating but stagnant trend from then until 2005, and a rapid increase until the present. This observed acceleration of plastic densities in the world's oceans, also reported for beaches around the globe, demands urgent international policy interventions.

Global assessment of marine plastic exposure risk for oceanic birds.

Plastic pollution is distributed patchily around the world's oceans. Likewise, marine organisms that are vulnerable to plastic ingestion or entanglement have uneven distributions. Understanding where wildlife encounters plastic is crucial for targeting research and mitigation. Oceanic seabirds, particularly petrels, frequently ingest plastic, are highly threatened, and cover vast distances during foraging and migration. However, the spatial overlap between petrels and plastics is poorly understood. Here we combine marine plastic density estimates with individual movement data for 7137 birds of 77 petrel species to estimate relative exposure risk. We identify high exposure risk areas in the Mediterranean and Black seas, and the northeast Pacific, northwest Pacific, South Atlantic and southwest Indian oceans. Plastic exposure risk varies greatly among species and populations, and between breeding and non-breeding seasons. Exposure risk is disproportionately high for Threatened species. Outside the Mediterranean and Black seas, exposure risk is highest in the high seas and Exclusive Economic Zones (EEZs) of the USA, Japan, and the UK. Birds generally had higher plastic exposure risk outside the EEZ of the country where they breed. We identify conservation and research priorities, and highlight that international collaboration is key to addressing the impacts of marine plastic on wide-ranging species.

Mitigation strategies to reverse the rising trend of plastics in Polar Regions.

Plastic marine pollution in the Arctic today illustrates the global distribution of plastic waste of all sizes traveling by wind and waves, entering food chains, and presenting challenges to management and mitigation. While currents move plastics from lower latitudes into the Arctic, significant waste is also generated by remote communities, as well as maritime activities, such as shipping, fishing and tourism, which are increasing their activities as seasonal sea ice diminishes. Mitigation strategies may include monitoring programs of plastic waste abundance and distribution, improved waste management in Arctic communities, Extended Producer Responsibility (EPR) to reverse the transport of waste plastics and packaging from remote communities, incentivized gear recovery of abandoned, lost and discarded fishing gear (ALDFG), gear tagging and tracking, and restricting tourism and employing "leave no trace" policies. Here we report how these mitigation strategies are employed in the Arctic to minimize plastic waste impacts, and move Arctic communities toward better materials management and circular economic practices. The evidence of harm from waste plastics exacerbated by the ubiquity of plastic marine pollution in all biomes, and the rapid reporting of ecological and social costs, together suggest that we know enough to act quickly to manage and mitigate plastics from all sources to the Arctic.

Predicted growth in plastic waste exceeds efforts to mitigate plastic pollution.

Plastic pollution is a planetary threat, affecting nearly every marine and freshwater ecosystem globally. In response, multilevel mitigation strategies are being adopted but with a lack of quantitative assessment of how such strategies reduce plastic emissions. We assessed the impact of three broad management strategies, plastic waste reduction, waste management, and environmental recovery, at different levels of effort to estimate plastic emissions to 2030 for 173 countries. We estimate that 19 to 23 million metric tons, or 11%, of plastic waste generated globally in 2016 entered aquatic ecosystems. Considering the ambitious commitments currently set by governments, annual emissions may reach up to 53 million metric tons per year by 2030. To reduce emissions to a level well below this prediction, extraordinary efforts to transform the global plastics economy are needed.

Spatial trends and drivers of marine debris accumulation on shorelines in South Eleuthera, The Bahamas using citizen science.

This study measured spatial distribution of marine debris stranded on beaches in South Eleuthera, The Bahamas. Citizen science, fetch modeling, relative exposure index and predictive mapping were used to determine marine debris source and abundance. Citizen scientists quantified debris type and abundance on 16 beaches within three coastal exposures (The Atlantic Ocean, Great Bahama Bank and The Exuma Sound) in South Eleuthera. Marine debris, (~2.5 cm or larger) on each beach was monitored twice between March-May and September-November 2013 at the same locations using GPS. Approximately, 93% of all debris items were plastic with plastic fragments (≤2.5 cm) being the most common. There were spatial differences (p ≤ 0.0001) in plastic debris abundance between coastal exposures. Atlantic Ocean beaches had larger quantities of plastic debris by weight and by meter (m) of shoreline. Stranded plastic may be associated with Atlantic Ocean currents associated with leakage from the North Atlantic sub-tropical gyre.

Double trouble in the South Pacific subtropical gyre: Increased plastic ingestion by fish in the oceanic accumulation zone.

Fish are an important food source for South Pacific (SP) island countries, yet there is little information on contamination of commercial marine fish species by plastic. The aim of our study was to perform a broad-scale assessment of plastic ingestion by fish common in the diet of SP inhabitants. We examined 932 specimens from 34 commercial fish species across four SP locations, and some of the prey they ingested, for the presence of marine plastics. Plastic was found in 33 species, with an average ingestion rate (IR) of 24.3 ±â€¯1.4% and plastic load of 2.4 ±â€¯0.2 particles per fish. Rapa Nui fish exhibited the greatest IR (50.0%), significantly greater than in other three locations. Rapa Nui is located within the SP subtropical gyre, where the concentration of marine plastics is high and food is limited. Plastic was also found in prey, which confirms the trophic transfer of microplastics.

Microplastic sampling with the AVANI trawl compared to two neuston trawls in the Bay of Bengal and South Pacific.

Many typical neuston trawls can only be used during relatively calm sea states and slow tow speeds. During two expeditions to the Bay of Bengal and the eastern South Pacific we investigated whether the new, high-speed AVANI trawl (All-purpose Velocity Accelerated Net Instrument) collects similar amounts and types of microplastics as two established scientific trawl designs, the manta trawl and the DiSalvo neuston net. Using a 335 µm net, the AVANI trawl can collect microplastics from the sea surface at speeds up to 8 knots as it "skis" across the surface, whereas the manta and DiSalvo neuston trawls must be towed slowly in a less turbulent sea state and often represent shorter tow lengths. Generally, the AVANI trawl collected a greater numerical abundance and weight of plastic particles in most size classes and debris types than the manta trawl and DiSalvo neuston net, likely because these trawls only skim the surface layer while the AVANI trawl, moving vertically in a random fashion, collects a "deeper" sample, capturing the few plastics that float slightly lower in the water column. However, the samples did not differ enough that results were significantly affected, suggesting that studies done with these different trawls are comparable. The advantage of the AVANI trawl over traditional research trawls is that it allows for collection on vessels underway at high speeds and during long transits, allowing for a nearly continuous sampling effort over long distances. As local surface currents make sea surface abundance widely heterogeneous, widely spaced short-tow trawls, such as the manta and DiSalvo trawls, can catch or miss hotspots or meso-scale variability of microplastic accumulations, whereas the AVANI trawl, if utilized for back-to-back tows of intermediate distances (5-10 km), can bridge variable wind conditions and debris concentrations potentially reducing variance and provide a greater resolution of spatial distribution.

An ecological assessment of bisphenol-A: evidence from comparative biology.

This review assesses the effects of environmental concentrations of bisphenol-A (BPA) on wildlife. Water concentrations of BPA vary tremendously due to proximity to point and non-point sources, but reported concentrations in stream/river water samples are less than 21 microg/L, and concentrations in landfill leacheate are less than 17.2mg/L. Extensive evidence indicates that BPA induces feminization during gonadal ontogeny of fishes, reptiles, and birds, but in all cases the amount of BPA necessary to cause such ontogenetic disruption exceeds concentrations in the environment. Extensive evidence also exists that adult exposure to environmental concentrations of BPA is detrimental to spermatogenetic endpoints and stimulates vitellogenin synthesis in model species of fish. Most of the reported effects of BPA on vertebrate wildlife species can be attributed to BPA acting as an estrogen receptor agonist, but mechanisms of disruption in invertebrates are less certain. A comparison of measured BPA environmental concentrations with chronic values suggests that no significant margin of safety exists for the protection of aquatic communities against the toxicity of BPA. Further studies should examine the most vulnerable vertebrate and invertebrate species.

Polybrominated diphenyl ethers (PBDEs) in fish tissue may be an indicator of plastic contamination in marine habitats.

The accumulation of plastic debris in pelagic habitats of the subtropical gyres is a global phenomenon of growing concern, particularly with regard to wildlife. When animals ingest plastic debris that is associated with chemical contaminants, they are at risk of bioaccumulating hazardous pollutants. We examined the relationship between the bioaccumulation of hazardous chemicals in myctophid fish associated with plastic debris and plastic contamination in remote and previously unmonitored pelagic habitats in the South Atlantic Ocean. Using a published model, we defined three sampling zones where accumulated densities of plastic debris were predicted to differ. Contrary to model predictions, we found variable levels of plastic debris density across all stations within the sampling zones. Mesopelagic lanternfishes, sampled from each station and analyzed for bisphenol A (BPA), alkylphenols, alkylphenol ethoxylates, polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs), exhibited variability in contaminant levels, but this variability was not related to plastic debris density for most of the targeted compounds with the exception of PBDEs. We found that myctophid sampled at stations with greater plastic densities did have significantly larger concentrations of BDE#s 183 -209 in their tissues suggesting that higher brominated congeners of PBDEs, added to plastics as flame-retardants, are indicative of plastic contamination in the marine environment. Our results provide data on a previously unsampled pelagic gyre and highlight the challenges associated with characterizing plastic debris accumulation and associated risks to wildlife.

High-levels of microplastic pollution in a large, remote, mountain lake.

Despite the large and growing literature on microplastics in the ocean, little information exists on microplastics in freshwater systems. This study is the first to evaluate the abundance, distribution, and composition of pelagic microplastic pollution in a large, remote, mountain lake. We quantified pelagic microplastics and shoreline anthropogenic debris in Lake Hovsgol, Mongolia. With an average microplastic density of 20,264 particles km(-2), Lake Hovsgol is more heavily polluted with microplastics than the more developed Lakes Huron and Superior in the Laurentian Great Lakes. Fragments and films were the most abundant microplastic types; no plastic microbeads and few pellets were observed. Household plastics dominated the shoreline debris and were comprised largely of plastic bottles, fishing gear, and bags. Microplastic density decreased with distance from the southwestern shore, the most populated and accessible section of the park, and was distributed by the prevailing winds. These results demonstrate that without proper waste management, low-density populations can heavily pollute freshwater systems with consumer plastics.

Plastic Pollution in the World's Oceans: More than 5 Trillion Plastic Pieces Weighing over 250,000 Tons Afloat at Sea.

Plastic pollution is ubiquitous throughout the marine environment, yet estimates of the global abundance and weight of floating plastics have lacked data, particularly from the Southern Hemisphere and remote regions. Here we report an estimate of the total number of plastic particles and their weight floating in the world's oceans from 24 expeditions (2007-2013) across all five sub-tropical gyres, costal Australia, Bay of Bengal and the Mediterranean Sea conducting surface net tows (N = 680) and visual survey transects of large plastic debris (N = 891). Using an oceanographic model of floating debris dispersal calibrated by our data, and correcting for wind-driven vertical mixing, we estimate a minimum of 5.25 trillion particles weighing 268,940 tons. When comparing between four size classes, two microplastic <4.75 mm and meso- and macroplastic >4.75 mm, a tremendous loss of microplastics is observed from the sea surface compared to expected rates of fragmentation, suggesting there are mechanisms at play that remove <4.75 mm plastic particles from the ocean surface.

The plastic-associated microorganisms of the North Pacific Gyre.

Microorganisms likely mediate processes affecting the fate and impacts of marine plastic pollution, including degradation, chemical adsorption, and colonization or ingestion by macroorganisms. We investigated the relationship between plastic-associated microorganism communities and factors such as location, temperature, salinity, plankton abundance, plastic concentration, item size, surface roughness, and polymer type. Small plastic items from the surface of the North Pacific Gyre in 2011 were examined using scanning electron microscopy. Bacillus bacteria (mean 1664 ± 247 individuals mm(-2)) and pennate diatoms (1097 ± 154 mm(-2)) were most abundant, with coccoid bacteria, centric diatoms, dinoflagellates, coccolithophores, and radiolarians present. Bacterial abundance was patchy, but increased on foamed polystyrene. Diatom abundance increased on items with rough surfaces and at sites with high plastic concentrations. Morphotype richness increased slightly on larger fragments, and a biogeographic transition occurred between pennate diatom groups. Better characterizing this community will aid in understanding how it interacts with plastic pollution.

Microplastic pollution in the surface waters of the Laurentian Great Lakes.

Neuston samples were collected at 21 stations during an ~700 nautical mile (~1300 km) expedition in July 2012 in the Laurentian Great Lakes of the United States using a 333 µm mesh manta trawl and analyzed for plastic debris. Although the average abundance was approximately 43,000 microplastic particles/km², station 20, downstream from two major cities, contained over 466,000 particles/km², greater than all other stations combined. SEM analysis determined nearly 20% of particles less than 1 mm, which were initially identified as microplastic by visual observation, were aluminum silicate from coal ash. Many microplastic particles were multi-colored spheres, which were compared to, and are suspected to be, microbeads from consumer products containing microplastic particles of similar size, shape, texture and composition. The presence of microplastics and coal ash in these surface samples, which were most abundant where lake currents converge, are likely from nearby urban effluent and coal burning power plants.

Plastic pollution in the South Pacific subtropical gyre.

Plastic marine pollution in the open ocean of the southern hemisphere is largely undocumented. Here, we report the result of a (4489 km) 2424 nautical mile transect through the South Pacific subtropical gyre, carried out in March-April 2011. Neuston samples were collected at 48 sites, averaging 50 nautical miles apart, using a manta trawl lined with a 333 µm mesh. The transect bisected a predicted accumulation zone associated with the convergence of surface currents, driven by local winds. The results show an increase in surface abundance of plastic pollution as we neared the center and decrease as we moved away, verifying the presence of a garbage patch. The average abundance and mass was 26,898 particles km(-2) and 70.96 g km(-2), respectively. 88.8% of the plastic pollution was found in the middle third of the samples with the highest value of 396,342 particles km(-2) occurring near the center of the predicted accumulation zone.