RESUMO
We investigated the discoloration of a highly concentrated monoclonal antibody (mAbZ) in sodium acetate (NaAc) and histidine/lysine (His/Lys) buffer after exposure to visible light. The color change of the mAbZ formulation was significantly more intense in NaAc buffer and developed a characteristic absorbance with a λmax of ca. 450 nm. We characterized this photo-chemically generated chromophore by comparison with visible light photo-degradation of a concentrated solution of a model compound for protein Trp residues, N-acetyl-l-tryptophan amide (NATA). The photo-degradation of NATA generated a chromophoric product with a λmax of ca. 450 nm and UV-vis spectroscopic properties identical to those of the product generated from mAbZ. This product was isolated and analyzed by high-performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS) and 1H, 13C, and 1H-13C heteronuclear single-quantum correlation NMR spectroscopy. MS/MS analysis reveals a product characterized by the loss of 33 Da from NATA, referred to as NATA-33. Together, the NMR data suggest that this product may be N-(2,4-dihydrocyclopenta[b]indol-2-yl)acetamide (structure P3a) or a tautomer (P3b-d).
Assuntos
Anticorpos Monoclonais/metabolismo , Luz/efeitos adversos , Proteólise/efeitos da radiação , Triptofano/análogos & derivados , Anticorpos Monoclonais/química , Anticorpos Monoclonais/efeitos da radiação , Soluções Tampão , Cromatografia Líquida de Alta Pressão , Estabilidade de Medicamentos , Armazenamento de Medicamentos , Ressonância Magnética Nuclear Biomolecular , Espectrometria de Massas em Tandem , Triptofano/metabolismo , Triptofano/efeitos da radiaçãoRESUMO
Neurturin is a potent neurotrophic factor that has been investigated as a potential therapeutic agent for the treatment of neurodegenerative diseases, including Parkinson's disease, and, more recently, for the treatment of type II diabetes. However, purification of neurturin for clinical applications has been hampered by its low solubility in aqueous solutions. Here we describe the development of a scalable manufacturing process for recombinant neurturin from E. coli. inclusion bodies. Neurturin was refolded from solubilized inclusion bodies by fed-batch dilution refolding with a titer of 90 mg per liter refold and a refold yield of 89%. A two-step purification process using cation exchange and hydrophobic interaction chromatography, followed by formulation using tangential flow filtration resulted in an overall process yield of about 56 mg purified neurturin per liter refold. Solubility of neurturin during the purification process was maintained by the addition of 15% (w/v) glycerol to all buffers. For clinical applications and parenteral administration glycerol was replaced by 15% (w/v) sulfobutyl ether-beta-cyclodextrin (i.e. Captisol) in the drug substance formulation buffer. The final purified product had low or undetectable levels of product-related impurities and concentrations of process-related contaminants such as host cell proteins, host cell DNA, endotoxins and Triton X-100 were reduced more than 10,000-fold or below the limit of detection. Bioactivity of purified recombinant neurturin was demonstrated in a cell-based assay by activation of the MAPK signaling pathway.
Assuntos
Escherichia coli/genética , Corpos de Inclusão/química , Neurturina/genética , Xilanos/química , Clonagem Molecular , Estabilidade Enzimática , Escherichia coli/metabolismo , Expressão Gênica , Genes Reporter , Vetores Genéticos/química , Vetores Genéticos/metabolismo , Humanos , Concentração de Íons de Hidrogênio , Luciferases/genética , Luciferases/metabolismo , Neurturina/química , Neurturina/metabolismo , Redobramento de Proteína , Estrutura Secundária de Proteína , Proteínas Recombinantes/química , Proteínas Recombinantes/genética , Proteínas Recombinantes/metabolismo , Elemento de Resposta Sérica/genética , Temperatura , Xilanos/metabolismo , beta-Ciclodextrinas/químicaRESUMO
Increased protein solubility is known to correlate with an increase in the proportion of lysine over arginine residues. Previous work has shown that the aggregation propensity of a single-chain variable fragment (scFv) does not correlate with its conformational stability or native-state protein-protein interactions. Here, we test the hypothesis that aggregation is driven by the colloidal stability of partially unfolded states, studying the behavior of scFv mutants harboring single or multiple site-specific arginine to lysine mutations in denaturing buffers. In 6 M guanidine hydrochloride (GdmCl) or 8 M urea, repulsive protein-protein interactions were measured for the wild-type and lysine-enriched (4RK) scFvs reflecting weakened short-range attractions and increased excluded volume. In contrast to the arginine-enriched mutant (7KR) scFv exhibited strong reversible association. In 3 M GdmCl, the minimum concentration at which the scFvs were unfolded, the hydrodynamic radius of 4RK remained constant but increased for the wild type and especially for 7KR. Studies of single-point arginine to lysine scFv mutants indicated that the observed aggregation propensity of arginine under denaturing conditions was nonspecific. Interestingly, one such swap generated a scFv with especially low aggregation rates under low/high ionic strengths and denaturing buffers; molecular modeling identified hydrogen bonding between the arginine side chain and main chain peptide groups, stabilizing the structure. The arginine/lysine ratio is not routinely considered in biopharmaceutical scaffold design or current amyloid prediction methods. This work therefore suggests a simple method for increasing the stability of a biopharmaceutical protein against aggregation.
Assuntos
Mutação , Agregados Proteicos/genética , Desdobramento de Proteína , Anticorpos de Cadeia Única/química , Anticorpos de Cadeia Única/genética , Modelos Moleculares , Conformação Proteica , Estabilidade ProteicaRESUMO
Monoclonal antibodies (mAbs) are complex molecular structures. They are often prone to development challenges particularly at high concentrations due to undesired solution properties such as reversible self-association, high viscosity, and liquid-liquid phase separation. In addition to formulation optimization, applying protein engineering can provide an alternative mitigation strategy. Protein engineering during the discovery phase can provide great benefits to optimize molecular properties, resulting in improved developability profiles. Here, we present a case study utilizing complementary analytical and predictive in silico methods. We have systematically identified and reengineered problematic residues responsible for the self-association of a model mAb, driven by a complex combination of hydrophobic and electrostatic interactions. Noteworthy findings include a more dominant contribution of hydrophobic interactions to self-association and potential feasibility of mutations in the CDR regions to mitigate self-association. The engineered mutation panel enabled us to assess potential correlations among commonly utilized developability screening assays, including affinity capture self-interaction nanospectroscopy (AC-SINS), dynamic light scattering (DLS), and apparent solubility by PEG-precipitation. In addition, we evaluated the correlations between experimental measurements and computational predictions. CamSol, an in silico computational tool that accounts for complex molecular interactions and neighboring hotspots, was found to be an effective screening tool. Our work led to reengineered mAb variants, better suited for high-concentration liquid formulation development. The engineered mAbs exhibited enhanced in vitro and simulated in vivo solubility and reduced self-association propensity, while maintaining binding affinity and thermal stability.
Assuntos
Anticorpos Monoclonais/genética , Desenvolvimento de Medicamentos , Mutagênese Sítio-Dirigida , Anticorpos Monoclonais/química , Anticorpos Monoclonais/farmacocinética , Disponibilidade Biológica , Química Farmacêutica , Clonagem Molecular , Simulação por Computador , Estabilidade de Medicamentos , Interações Hidrofóbicas e Hidrofílicas , Modelos Biológicos , Modelos Químicos , Mutação , Solubilidade , Eletricidade Estática , ViscosidadeRESUMO
A barrier to the use of hydrogen exchange-mass spectrometry (HX-MS) in many contexts, especially analytical characterization of various protein therapeutic candidates, is that differences in temperature, pH, ionic strength, buffering agent, or other additives can alter chemical exchange rates, making HX data gathered under differing solution conditions difficult to compare. Here, we present data demonstrating that HX chemical exchange rates can be substantially altered not only by the well-established variables of temperature and pH but also by additives including arginine, guanidine, methionine, and thiocyanate. To compensate for these additive effects, we have developed an empirical method to correct the hydrogen-exchange data for these differences. First, differences in chemical exchange rates are measured by use of an unstructured reporter peptide, YPI. An empirical chemical exchange correction factor, determined by use of the HX data from the reporter peptide, is then applied to the HX measurements obtained from a protein of interest under different solution conditions. We demonstrate that the correction is experimentally sound through simulation and in a proof-of-concept experiment using unstructured peptides under slow-exchange conditions (pD 4.5 at ambient temperature). To illustrate its utility, we applied the correction to HX-MS excipient screening data collected for a pharmaceutically relevant IgG4 mAb being characterized to determine the effects of different formulations on backbone dynamics.
RESUMO
Methicillin-resistant Staphylococcus aureus (MRSA) and Pseudomonas aeruginosa are major causes of hospital-acquired infections and sepsis. Due to increasing antibiotic resistance, new treatments are needed. Mesenchymal stem cells (MSCs) have antimicrobial effects, which can be enhanced by preconditioning with antibiotics. This study investigated using antibiotics to strengthen MSCs against MRSA and P. aeruginosa. MSCs were preconditioned with linezolid, vancomycin, meropenem, or cephalosporin. Optimal antibiotic concentrations were determined by assessing MSC survival. Antimicrobial effects were measured by minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and antimicrobial peptide (AMP) gene expression. Optimal antibiotic concentrations for preconditioning MSCs without reducing viability were 1 µg/mL for linezolid, meropenem, and cephalosporin and 2 µg/mL for vancomycin. In MIC assays, MSCs preconditioned with linezolid, vancomycin, meropenem, or cephalosporin inhibited MRSA or P. aeruginosa growth at lower concentrations than non-preconditioned MSCs (p ≤ 0.001). In MBC assays, preconditioned MSCs showed enhanced bacterial clearance compared to non-preconditioned MSCs, especially when linezolid and vancomycin were used against MRSA (p ≤ 0.05). Preconditioned MSCs showed increased expression of genes encoding the antimicrobial peptide genes hepcidin and LL-37 compared to non-preconditioned MSCs. The highest hepcidin expression was seen with linezolid and vancomycin preconditioning (p ≤ 0.001). The highest LL-37 expression was with linezolid preconditioning (p ≤ 0.001). MSCs' preconditioning with linezolid, vancomycin, meropenem, or cephalosporin at optimal concentrations enhances their antimicrobial effects against MRSA and P. aeruginosa without compromising viability. This suggests preconditioned MSCs could be an effective adjuvant treatment for antibiotic-resistant infections. The mechanism may involve upregulation of AMP genes.
Assuntos
Células-Tronco Mesenquimais , Staphylococcus aureus Resistente à Meticilina , Infecções Estafilocócicas , Humanos , Linezolida/farmacologia , Linezolida/uso terapêutico , Vancomicina , Pseudomonas aeruginosa/genética , Hepcidinas/farmacologia , Hepcidinas/uso terapêutico , Meropeném/farmacologia , Meropeném/uso terapêutico , Antibacterianos/farmacologia , Antibacterianos/uso terapêutico , Cefalosporinas/farmacologia , Peptídeos Antimicrobianos , Testes de Sensibilidade Microbiana , Infecções Estafilocócicas/microbiologiaRESUMO
Subcutaneous (SC) injections can be associated with local pain and discomfort that is subjective and may affect treatment adherence and overall patient experience. With innovations increasingly focused on finding ways to deliver higher doses and volumes (≥2 mL), there is a need to better understand the multiple intertwined factors that influence pain upon SC injection. As a priority for the SC Drug Development & Delivery Consortium, this manuscript provides a comprehensive review of known attributes from published literature that contribute to pain/discomfort upon SC injection from three perspectives: (1) device and delivery factors that cause physical pain, (2) formulation factors that trigger pain responses, and (3) human factors impacting pain perception. Leveraging the Consortium's collective expertise, we provide an assessment of the comparative and interdependent factors likely to impact SC injection pain. In addition, we offer expert insights and future perspectives to fill identified gaps in knowledge to help advance the development of patient-centric and well tolerated high-dose/high-volume SC drug delivery solutions.
Assuntos
Dor , Humanos , Injeções Subcutâneas , Dor/tratamento farmacológico , Sistemas de Liberação de MedicamentosRESUMO
Liquid-liquid phase separation is a phenomenon within biology whereby proteins can separate into dense and more dilute phases with distinct properties. Three antibodies that undergo liquid-liquid phase separation were characterized in the protein-rich and protein-poor phases. In comparison to the protein-poor phase, the protein-rich phase demonstrates more blue-shift tryptophan emissions and red-shifted amide I absorbances. Large changes involving conformational isomerization around disulfide bonds were observed using Raman spectroscopy. Amide I and protein fluorescence differences between the phases persisted to temperatures above the critical temperature but ceased at the temperature at which aggregation occurred. In addition, large changes occurred in the structural organization of water molecules within the protein-rich phase for all three antibodies. It is hypothesized that as the proteins have the same chemical potential in both phases, the protein viscosity is higher in the protein-rich phase resulting in slowed diffusion dependent protein aggregation in this phase. For all three antibodies we performed accelerated stability studies and found that the protein-rich phase aggregated at the same rate or slower than the protein-poor phase.
Assuntos
Anticorpos Monoclonais , Análise Espectral Raman , Anticorpos Monoclonais/química , Concentração de Íons de Hidrogênio , TemperaturaRESUMO
To combat the COVID-19 pandemic, potential therapies have been developed and moved into clinical trials at an unprecedented pace. Some of the most promising therapies are neutralizing antibodies against SARS-CoV-2. In order to maximize the therapeutic effectiveness of such neutralizing antibodies, Fc engineering to modulate effector functions and to extend half-life is desirable. However, it is critical that Fc engineering does not negatively impact the developability properties of the antibodies, as these properties play a key role in ensuring rapid development, successful manufacturing, and improved overall chances of clinical success. In this study, we describe the biophysical characterization of a panel of Fc engineered ("TM-YTE") SARS-CoV-2 neutralizing antibodies, the same Fc modifications as those found in AstraZeneca's Evusheld (AZD7442; tixagevimab and cilgavimab), in which the TM modification (L234F/L235E/P331S) reduce binding to FcγR and C1q and the YTE modification (M252Y/S254T/T256E) extends serum half-life. We have previously shown that combining both the TM and YTE Fc modifications can reduce the thermal stability of the CH2 domain and possibly lead to developability challenges. Here we show, using a diverse panel of TM-YTE SARS-CoV-2 neutralizing antibodies, that despite lowering the thermal stability of the Fc CH2 domain, the TM-YTE platform does not have any inherent developability liabilities and shows an in vivo pharmacokinetic profile in human FcRn transgenic mice similar to the well-characterized YTE platform. The TM-YTE is therefore a developable, effector function reduced, half-life extended antibody platform.
Assuntos
COVID-19 , SARS-CoV-2 , Animais , Camundongos , Humanos , SARS-CoV-2/genética , Pandemias , Anticorpos NeutralizantesRESUMO
Electrostatically driven attractions between proteins can result in issues for therapeutic protein formulations such as solubility limits, aggregation, and high solution viscosity. Previous work showed that a model monoclonal antibody displayed large and potentially problematic electrostatically driven attractions at typical pH (5-8) and ionic strength conditions (â¼10-100 mM). Molecular simulations of a hybrid coarse-grained model (1bC/D, one bead per charged site and per domain) were used to predict potential point mutations to identify key charge changes (charge-to-neutral or charge-swap) that could greatly reduce the net attractive protein-protein self-interactions. A series of variants were tested experimentally with static and dynamic light scattering to quantify interactions and compared to model predictions at low and intermediate ionic strength. Differential scanning calorimetry and circular dichroism confirmed minimal impact on structural or thermal stability of the variants. The model provided quantitative/semiquantitative predictions of protein self-interactions compared to experimental results as well as showed which amino acid pairings or groups had the most impact.
Assuntos
Anticorpos Monoclonais/metabolismo , Anticorpos Monoclonais/química , Anticorpos Monoclonais/genética , Células HEK293 , Humanos , Modelos Moleculares , Mutação Puntual , Ligação Proteica , Eletricidade EstáticaRESUMO
The influence of PEGylation on the thermal stability of small therapeutic proteins was evaluated using two model proteins. Changes in the midpoint of thermal unfolding and the ability to properly refold after thermal denaturation were monitored by differential scanning calorimetry (DSC) as a function of PEGylation and pH. The results showed that PEGylation increased the thermal stability of both model proteins as well as their ability to refold properly after thermal denaturation. The DSC results were compared to traditional accelerated stability data that were collected using size exclusion high performance liquid chromatography (SE-HPLC). The DSC data agreed reasonably well with those from SE-HPLC indicating that microcalorimetry can be an efficient screening tool for PEGylated proteins.
Assuntos
Fibronectinas/química , Região Variável de Imunoglobulina/química , Fragmentos de Peptídeos/química , Polietilenoglicóis/química , Estabilidade Proteica , Varredura Diferencial de Calorimetria , Cromatografia em Gel , Cromatografia Líquida de Alta Pressão , Estabilidade de Medicamentos , Humanos , Concentração de Íons de Hidrogênio , Polietilenoglicóis/farmacocinética , Desnaturação Proteica , Dobramento de Proteína , TemperaturaRESUMO
Weak macromolecular interactions assume a dominant role in the behavior of highly concentrated solutions, and are at the center of a variety of fields ranging from colloidal chemistry to cell biology, neurodegenerative diseases, and manufacturing of protein drugs. They are frequently measured in different biophysical techniques in the form of second virial coefficients, and nonideality coefficients of sedimentation and diffusion, which may be related mechanistically to macromolecular distance distributions in solution and interparticle potentials. A problem arises for proteins where reversible self-association often complicates the concentration-dependent behavior, such that grossly inconsistent coefficients are measured in experiments based on different techniques, confounding quantitative conclusions. Here we present a global multi-method analysis that synergistically bridges gaps in resolution and sensitivity of orthogonal techniques. We demonstrate the method with a panel of monoclonal antibodies exhibiting different degrees of self-association. We show how their concentration-dependent behavior, examined by static and dynamic light scattering and sedimentation velocity, can be jointly described in a self-consistent framework that separates nonideality coefficients from self-association properties, and thereby extends the quantitative interpretation of nonideality coefficients to probe dynamics in highly concentrated protein solutions.
Assuntos
Substâncias Macromoleculares/química , Algoritmos , Anticorpos Monoclonais/química , Difusão Dinâmica da Luz , Hidrodinâmica , Temperatura , UltracentrifugaçãoRESUMO
The stability of attenuated virus vaccines has traditionally been assessed by a plaque assay to measure the virus's loss of replication competency in response to a variety of environmental perturbations. Although this method provides information regarding the impact of the vaccine formulation, it involves an empirical approach to evaluate stability. Biophysical studies on the other hand have the potential to provide insight into the mechanisms of inactivation of a viral vaccine in response to a variety of stressed conditions. Herein, we have employed a variety of spectroscopic techniques (i.e., circular dichroism, fluorescence spectroscopy and dynamic light scattering) for a comprehensive examination of the thermal stability of three live-attenuated human-bovine reassortant rotavirus strains (G1, G3 and G4) in the 5-8 pH range. The spectroscopic methods employed are not specific and response changes reflect an average change over the entire virus structure. The present work, however, suggests the utility of these methods in early formulation of rotaviral vaccines due to their ability to identify regions of marginal stability over which high throughput excipient screening assays can be designed. We have further shown that these methods are sufficiently sensitive to differentiate the stability of the three homologous G-subtypes differing only in the composition of their surface antigenic proteins. The data from these spectroscopic methods are also compared to biological activity using a tissue culture viral infectivity assay. Partial correlation between the structural alterations and losses in activity are observed, further suggesting the utility of biophysical studies in early formulation studies of rotavirus vaccines.
Assuntos
Vacinas contra Rotavirus/química , Rotavirus/química , Análise Espectral , Animais , Bovinos , Estabilidade de Medicamentos , Humanos , Concentração de Íons de Hidrogênio , Microscopia Eletrônica de Transmissão , Vírus Reordenados/química , Vírus Reordenados/ultraestrutura , Rotavirus/ultraestrutura , Temperatura , Vacinas Atenuadas/químicaRESUMO
In this work, we continue to examine excipient effects on the reversible self-association (RSA) of 2 different IgG1 monoclonal antibodies (mAb-J and mAb-C). We characterize the RSA behavior of mAb-C which, similar to mAb-J (see Part 1), undergoes concentration-dependent RSA, but by a different molecular mechanism. Five additives that affect protein hydrophobic interactions to varying extents including a chaotropic salt (guanidine hydrochloride), a hydrophobic salt (trimethylphenylammonium iodide), an aromatic amino acid derivative (tryptophan amide hydrochloride), a kosmotropic salt (sodium sulfate, Na2SO4), and a less polar solvent (ethanol) were evaluated to determine their effects on the solution properties, molecular properties, and RSA of mAb-C at various protein concentrations. Four of the 5 additives examined demonstrated favorable effects on the pharmaceutical properties of high concentration mAb-C solutions (i.e., lower viscosity and weakened protein-protein interactions, PPIs) with a ranking order of guanidine hydrochloride > trimethylphenylammonium iodide > tryptophan amide hydrochloride > ethanol as measured by various biophysical techniques. Conversely, addition of Na2SO4 resulted in less desirable solution properties and enhanced PPIs. The effect of these 5 additives on mAb-C backbone dynamics were evaluated by hydrogen exchange-mass spectrometry (at high vs. low protein concentrations) to better understand their effects on the molecular sites of RSA in mAb-C.
Assuntos
Anticorpos Monoclonais/química , Excipientes/química , Imunoglobulina G/química , Agregados Proteicos , Interações Hidrofóbicas e Hidrofílicas , Simulação de Acoplamento Molecular , Transição de Fase , Estabilidade Proteica , Soluções , Solventes/química , ViscosidadeRESUMO
Many challenges limit the formulation of antibodies as high-concentration liquid dosage forms including elevated solution viscosity, decreased physical stability, and in some cases, liquid-liquid phase separation. In this work, an IgG1 monoclonal antibody (mAb-J), which undergoes concentration-dependent reversible self-association (RSA), is characterized in the presence of 4 amino acids (Arg, Lys, Asp, Glu) and NaCl using biophysical techniques and hydrogen exchange-mass spectrometry. The 5 additives disrupt RSA, prevent phase separation, and reduce solution viscosity to varying extents. These excipients also cause decreased turbidity, reduced average hydrodynamic diameter, and increased relative solubility of mAb-J in solution. The RSA disrupting efficacy of the positively charged amino acids is greater than either negatively charged amino acids or NaCl. As measured by hydrogen exchange-mass spectrometry, anionic excipients induced more alterations of mAb-J backbone dynamics at pH 6.0, and weak Fab-Fab interactions likely remained with the addition of either cationic or anionic excipients at high protein concentrations. Along with a companion paper examining a different mAb with a different molecular mechanism of RSA, these results are discussed in the context of various excipient strategies to disrupt protein-protein interactions to formulate mAbs at high protein concentrations with good stability profiles and favorable pharmaceutical properties for subcutaneous administration.
Assuntos
Anticorpos Monoclonais/química , Composição de Medicamentos/métodos , Excipientes/química , Imunoglobulina G/química , Formas de Dosagem , Estabilidade de Medicamentos , Difusão Dinâmica da Luz , Modelos Químicos , Multimerização Proteica , Solubilidade , Soluções , ViscosidadeRESUMO
Light exposure of a monoclonal antibody formulation containing polysorbate 80 (PS80) leads to cis/trans isomerization of monounsaturated and polyunsaturated fatty acids. This cis/trans isomerization was monitored by positive electrospray ionization mass spectrometry of intact PS80 components as well as by negative ion electrospray ionization mass spectrometry analysis of free fatty acids generated via esterase-catalyzed hydrolysis. The light-induced cis/trans isomerization of unsaturated fatty acids in PS80 required the presence of the monoclonal antibody, or, at a minimum (for mechanistic studies), a combination of N-acetyltryptophan amide and glutathione disulfide, suggesting the involvement of thiyl radicals generated by photoinduced electron transfer from Trp to the disulfide. Product analysis confirmed the conversion of PS80-bound oleic acid to elaidic acid; furthermore, together with linoleic acid, we detected conjugated linoleic acids in PS80, which underwent light-induced cis/trans isomerization.
Assuntos
Anticorpos Monoclonais/química , Ácidos Linoleicos Conjugados/efeitos da radiação , Ácidos Oleicos/efeitos da radiação , Polissorbatos/efeitos da radiação , Composição de Medicamentos , Estabilidade de Medicamentos , Isomerismo , Ácidos Linoleicos Conjugados/química , Ácidos Oleicos/química , Oxirredução , Fotólise , Polissorbatos/química , Estabilidade ProteicaRESUMO
Polysorbates are used ubiquitously in protein therapeutic drugs to help minimize adsorption to surfaces and aggregation. It has been recognized that polysorbate can itself degrade and in turn result in loss of efficacy of therapeutic proteins. We studied the 2 main pathways of polysorbate 80 (PS80) degradation, enzymatic ester hydrolysis, and oxidation. Degraded polysorbates were quantified through mass spectrometry to identify the loss of individual components. Next Langmuir trough adsorption isotherms were used to characterize changes in the surface activity of the degraded polysorbates. PS80 degraded via hydrolysis results in slower surface adsorption rates, whereas the oxidized PS80 show increased surface activity. However, the critical micelle concentration remained unchanged. A monoclonal antibody was formulated with stock and degraded polysorbates to probe their ability to prevent aggregation. Hydrolyzed polysorbate resulted in a large increase in particle formation during shaking stress. Oxidized PS80 was still protective against aggregation for the monoclonal antibody. Monomer loss as measured by SEC was comparable in formulations without PS80 to those with esterase hydrolyzed PS80. Monomer loss for oxidized PS80 was similar to that of nondegraded PS80. Hydrolysis of PS80 resulted in free fatty acids which formed insoluble particles during mechanical agitation which stimulated protein aggregation.
Assuntos
Anticorpos Monoclonais/química , Polissorbatos/química , Tensoativos/química , Composição de Medicamentos , Estabilidade de Medicamentos , Hidrólise , Modelos Químicos , Oxirredução , Agregados Proteicos , Estabilidade Proteica , Proteólise , Estresse MecânicoRESUMO
Monoclonal antibodies are a class of biotherapeutics used for an increasing variety of disorders, including cancer, autoimmune, neurodegenerative, and viral diseases. Besides their antigen specificity, therapeutic use also mandates control of their solution interactions and colloidal properties in order to achieve a stable, efficacious, non-immunogenic, and low viscosity antibody solution at concentrations in the range of 50-150 mg/mL. This requires characterization of their reversible self-association, aggregation, and weak attractive and repulsive interactions governing macromolecular distance distributions in solution. Simultaneous measurement of these properties, however, has been hampered by solution nonideality. Based on a recently introduced sedimentation velocity method for measuring macromolecular size distributions in a mean-field approximation for hydrodynamic interactions, we demonstrate simultaneous measurement of polydispersity and weak and strong solution interactions in a panel of antibodies with concentrations up to 45 mg/mL. By allowing approximately an order of magnitude higher concentrations than previously possible in sedimentation velocity size distribution analysis, this approach can substantially improve efficiency and sensitivity for characterizing polydispersity and interactions of therapeutic antibodies at or close to formulation conditions.
Assuntos
Anticorpos Monoclonais/química , Agregados Proteicos , Hidrodinâmica , Concentração de Íons de Hidrogênio , Ultracentrifugação , ViscosidadeRESUMO
An automated method using biotinylated GroEL-streptavidin biosensors with biolayer interferometry (GroEL-BLI) was evaluated to detect the formation of transiently formed, preaggregate species in various pharmaceutically relevant monoclonal antibody (mAb) samples. The relative aggregation propensity of various IgG1 and IgG4 mAbs was rank ordered using the GroEL-BLI biosensor method, and the least stable IgG4 mAb was subjected to different stresses including elevated temperatures, acidic pH, and addition of guanidine HCl. The GroEL-BLI biosensor detects mAb preaggregate formation mostly before, or sometimes concomitantly with, observing soluble aggregates and subvisible particles using size-exclusion chromatography and microflow imaging, respectively. A relatively unstable bispecific antibody (Bis-3) was shown to bind the GroEL biosensor even at low temperatures (25°C). During thermal stress (50°C, 1 h), increased Bis-3 binding to GroEL-biosensors was observed prior to aggregation by size-exclusion chromatography or microflow imaging. Transmission electron microscopy analysis of Bis-3 preaggregate GroEL complexes revealed, in some cases, potential hydrophobic interaction sites between the Fc domain of the Bis-3 and GroEL protein. The automated BLI method not only enables detection of transiently formed preaggregate species that initiate protein aggregation pathways but also permits rapid mAb formulation stability assessments at low volumes and low protein concentrations.