Spontaneous Metal-Free Transfer Hydrogenation of Iminoboranes with Ammonia Borane and Amine Boranes.

The first spontaneous, metal-free, room-temperature hydrogen transfer from ammonia borane to an iminoborane is reported. Mechanistic studies of the reaction indicate a concerted transfer of H+ and H- from donor to acceptor with an activation energy far below those of comparable concerted transfer hydrogenations. This reaction was employed in the syntheses and isolation of new B,N-disubstituted aminoboranes, a comparatively rare subset within the aminoborane family. This successful transfer hydrogenation to a highly dehydrogenated BN system may serve as a starting point for the design of new systems capable of reversible dehydrogenation/rehydrogenation.

Isolation of a Reactive Cyclopropane Intermediate via a Unique Catalyst-Free Spontaneous Cyclopropanation Step at 0 °C.

A remarkably mild, catalyst-free cyclopropanation reaction is confirmed by low-temperature isolation of a fused bicyclic cyclopropane intermediate. This intermediate is one of two that were isolated and fully characterised in a three-step temperature-controllable reaction cascade.

Unprecedented Borane, Diborane(3), Diborene, and Borylene Ligands via Pt-Mediated Borane Dehydrogenation.

Reactions of an aryldihydroborane with a Pt(0) complex lead to a range of novel products, including complexes with bridging diborene and diborane(3) ligands and a complex with both borylene and borane (M → B) ligands. The products imply varying degrees of dehydrogenation of the boron centers with concomitant formation of boron-boron bonds, which in one case is later broken. These reactions show that although the dehydrocoupling of dihydroboranes is not a straightforward process in this case, the reactions are capable of connecting boron atoms in unusual ways, leading to unprecedented bonding motifs.

Synthesis of Functionalized 1,4-Azaborinines by the Cyclization of Di-tert-butyliminoborane and Alkynes.

Di-tert-butyliminoborane is found to be a very useful synthon for the synthesis of a variety of functionalized 1,4-azaborinines by the Rh-mediated cyclization of iminoboranes with alkynes. The reactions proceed via [2 + 2] cycloaddition of iminoboranes and alkynes in the presence of [RhCl(PiPr3)2]2, which gives a rhodium η(4)-1,2-azaborete complex that yields 1,4-azaborinines upon reaction with acetylene. This reaction is compatible with substrates containing more than one alkynyl unit, cleanly affording compounds containing multiple 1,4-azaborinines. The substitution of terminal alkynes for acetylene also led to 1,4-azaborinines, enabling ring substitution at a predetermined location. We report the first general synthesis of this new methodology, which provides highly regioselective access to valuable 1,4-azaborinines in moderate yields. A mechanistic rationale for this reaction is supported by DFT calculations, which show the observed regioselectivity to arise from steric effects in the B-C bond coupling en route to the rhodium η(4)-1,2-azaborete complex and the selective oxidative cleavage of the B-N bond of the 1,2-azaborete ligand in its subsequent reaction with acetylene.

Controlling Regiochemistry in the Syntheses of Boraindanes from Diborane(4) Starting Materials.

The reaction of tert-butylisonitrile (tBuNC) with 1,2-dihalo-1,2-diduryldiborane leads initially to the formation of the mono-base adduct of the symmetrical diborane(4), which then undergoes an intramolecular cyclization resulting in the formation of a 1-boraindane. This result is in contrast to a previously reported cyclization of a mono-isonitrile adduct of an unsymmetrical 1,1-pinacol-2,2-diaryldiborane(4), which results in the formation of a 1-boraindane. This latter result is herein confirmed by the reaction of 1,1-difluoro-2,2-dimesityldiborane(4) with tBuNC, which yielded the 2-boraindane compound. The mechanism of the former reaction has been computationally elucidated, and the differences between this route and the pathway to 1-boraindanes is discussed. These reactions further the understanding of the chemistry of the increasingly popular mono-base adducts of diborane(4), demonstrate the versatility of isonitriles in comparison to standard two-electron donors, and elucidate selective routes to boron-containing polycyclics, such as those being proposed as analogues for conventional organic pharmaceuticals.

Regioselective Catalytic and Stepwise Routes to Bulky, Functional-Group-Appended, and Luminescent 1,2-Azaborinines.

The regioselective syntheses of 1,2-azaborinines is achieved using an unsymmetrical iminoborane through both catalytic and stepwise modular routes. The 1,2-azaborinine ring can be selectively functionalized in the 4- and/or 6-position through control of the stepwise reaction sequence, allowing access to vinyl-functionalized and redox-active, luminescent, donor-functionalized 1,2-azaborinines. The electrochemistry and photochemistry of a tetraarylamine-substituted 1,2-azaborinine are studied. Cyclic voltammetry of this compound, relative to a non-B,N-substituted reference molecule, showed an additional oxidation wave assigned to the oxidation of the azaborinine ring, while emission spectroscopy indicated that the azaborinine was significantly more fluorescent than the reference.

Neutral Diboron Analogues of Archetypal Aromatic Species by Spontaneous Cycloaddition.

Among the numerous routes organic chemists have developed to synthesize benzene derivatives and heteroaromatic compounds, transition-metal-catalyzed cycloaddition reactions are the most elegant. In contrast, cycloaddition reactions of heavier alkene and alkyne analogues, though limited in scope, proceed uncatalyzed. In this work we present the first spontaneous cycloaddition reactions of lighter alkene and alkyne analogues. Selective addition of unactivated alkynes to boron-boron multiple bonds under ambient conditions yielded diborocarbon equivalents of simple aromatic hydrocarbons, including the first neutral 6 π-aromatic diborabenzene compound, a 2 π-aromatic triplet biradical 1,3-diborete, and a phosphine-stabilized 2 π-homoaromatic 1,3-dihydro-1,3-diborete. DFT calculations suggest that all three compounds are aromatic and show frontier molecular orbitals matching those of the related aromatic hydrocarbons, C6 H6 and C4 H4 (2+) , and homoaromatic C4 H5 (+) .

Highly Strained Heterocycles Constructed from Boron-Boron Multiple Bonds and Heavy Chalcogens.

The reactions of a diborene with elemental selenium or tellurium are shown to afford a diboraselenirane or diboratellurirane, respectively. These reactions are reminiscent of the sequestration of subvalent oxygen and nitrogen in the formation of oxiranes and aziridines; however, such reactivity is not known between alkenes and the heavy chalcogens. Although carbon is too electronegative to affect the reduction of elements with lower relative electronegativity, the highly reducing nature of the B-B double bond enables reactions with Se(0) and Te(0) . The capacity of multiple bonds between boron atoms to donate electron density is highlighted in reactions where diborynes behave as nucleophiles, attacking one of the two Te atoms of diaryltellurides, forming salts consisting of diboratellurenium cations and aryltelluride anions.

A Binuclear 1,1'-Bis(boratabenzene) Complex: Unprecedented Intramolecular Metal-Metal Communication through a B-B Bond.

We report the synthesis of the first 1,1'-bis(boratabenzene) species by tetrabromodiborane(4)-induced ring-expansion reactions of cobaltocene. Six equivalents of cobaltocene are required as the species plays the dual role of reagent and reductant to yield [{(η(5) -C5 H5 )Co}2 {µ:η(6) ,η(6) -(BC5 H5 )2 }]. The formally dianionic bis(boratabenzene) moiety with a boron-boron single bond can be viewed as a symmetric dimer of the parent boratabenzene anion as well as the first example of a diboron analogue of biphenyl. The solution electrochemistry of the bimetallic complex shows four stepwise redox events, indicating significant intramolecular interaction between the cobalt ions across the 1,1'-bis(boratabenzene) unit. The magnetic properties, as investigated by variable-temperature SQUID magnetometry, reveal weak intramolecular antiferromagnetic interactions. Density functional theory calculations support the experimental results and add insight into the various electronic states of the complex.

Experimental assessment of the strengths of B-B triple bonds.

Diborynes, molecules containing homoatomic boron-boron triple bonds, have been investigated by Raman spectroscopy in order to determine the stretching frequencies of their central B≡B units as an experimental measure of homoatomic bond strengths. The observed frequencies between 1600 and 1750 cm(-1) were assigned on the basis of DFT modeling and the characteristic pattern produced by the isotopic distribution of boron. This frequency completes the series of known stretches of homoatomic triple bonds, fitting into the trend established by the long-known stretching frequencies of C≡C and N≡N triple bonds in alkynes and dinitrogen, respectively. A quantitative analysis was carried out using the concept of relaxed force constants. The results support the classification of the diboryne as a true triple bond and speak to the similarities of molecules constructed from first-row elements of the p block. Also reported are the relaxed force constants of a recently reported diborabutatriene, which again fit into the trend established by the vibrational spectroscopy of organic cumulenes. As part of these studies, a new diboryne with decreased steric bulk was synthesized, and a computational study of the rotation of the stabilizing ligands indicated alkyne-like electronic isolation of the central B2 unit.

Organometallic Probe for the Electronics of Base-Stabilized Group†11 Metal Cations.

A number of trimetalloborides have been synthesized through the reactions of base-stabilized coinage metal chlorides with a dimanganaborylene lithium salt in the hope of using this organometallic platform to compare and evaluate the electronics of these popular coinage metal fragments. The adducts of Cu(I), Ag(I), and Au(I) ions, stabilized by tricyclohexylphosphine (PCy3), N-1,3-bis(4-methylphenyl)imidazol-2-ylidene (ITol), or 1-(2,6-diisopropylphenyl)-3,3,5,5-tetramethylpyrrolidin-2-ylidene (CAAC), with [{Cp(CO)2Mn}2B](-) were studied spectroscopically, structurally, and computationally. The geometries of the adducts fall into two classes, one symmetric and one asymmetric, each relying on the combined characteristics of both the metal and ligand. The energetic factors proposed as the causes of the structural differences were investigated by ETS-NOCV (extended transition state-natural orbitals for chemical valence) analysis, which showed the final geometry to be controlled by the competition between the tendency of the coinage metal to adopt a higher or lower coordination number and the willingness of the cationic fragment to participate in back-bonding interactions.

The reactivities of iminoboranes with carbenes: BN isosteres of carbene-alkyne adducts.

The first examples of adducts of cyclic alkyl(amino) carbenes (CAAC) and N-heterocyclic carbenes (NHCs) with iminoboranes have been synthesized and isolated at low temperature (-45 °C). The adducts show short BN bonds and planarity at boron, mimicking the structures of the isoelectronic imine functionality. When di-tert-butyliminoborane was reacted with 1,3-bis(isopropyl)imidazol-2-ylidene (IPr), the initially formed Lewis acid-base adduct quickly rearranged to form a new carbene substituted with an aminoborane at the 4-position. Warming the iminoborane-CAAC adduct to room temperature resulted in an intramolecular cyclization to give a bicyclic 1,2-azaborilidine compound.

Reductive Insertion of Elemental Chalcogens into Boron-Boron Multiple Bonds.

The syntheses of sulfur- and selenium-bridged cyclic compounds containing boron stabilized by N-heterocyclic carbenes (NHCs) have been achieved by the reductive insertion of elemental chalcogens into boron-boron multiple bonds. The three pairs of bonding electrons between the boron atoms in the triply bonded diboryne enabled six-electron reduction reactions, resulting in the formation of [2.2.1]-bicyclic systems wherein bridgehead boron atoms are spanned by three chalcogen bridges. A similar reaction using a diborene (boron-boron double bond) resulted in the reductive transfer of both pairs of bonding electrons to three sulfur atoms, yielding a NHC-stabilized trisulfidodiborolane. The demonstration of these six- and four-electron reductions lends support to the presence of three and two pairs of bonding electrons between the boron atoms of the diboryne and diborene, respectively, a fact that may be useful in future discussions on bond order.

From an electron-rich bis(boraketenimine) to an electron-poor diborene.

The reaction of the bisboracumulene (CAAC)2 B2 (CAAC=1-(2,6-diisopropylphenyl)-3,3,5,5-tetramethylpyrrolidin-2-ylidene) with excess tert-butylisocyanide resulted in complexation of the isocyanide at boron. Though this compound might be formally drawn with a lone pair on boron, these electrons are highly delocalized throughout a conjugated π-network consisting of the π-acidic CAAC and isocyanide ligands. Heating this compound to 110 °C liberated the organic periphery of both isocyanide ligands, yielding the first example of a dicyanodiborene. Cyclic voltammetry conducted on this diborene indicated the presence of reduction waves, making this compound unique among diborenes, which are otherwise highly reducing.

Exclusive π Encapsulation of Light Alkali Metal Cations by a Neutral Molecule.

Cation-π interactions are one of the most important classes of noncovalent bonding, and are seen throughout biology, chemistry, and materials science. However, in almost every documented case, these interactions play only a supporting role to much stronger covalent or dative bonds, thus making examples of exclusive cation-π bonding exceedingly rare. In this study, a neutral diboryne molecule is found to encapsulate the light alkali metal cations Li(+) and Na(+) in the absence of a net charge, covalent bonds, or lone-pair donor groups. The resulting encapsulation complexes are, to our knowledge, the first structurally authenticated species in which a neutral molecule binds the light alkali metals exclusively through cation-π interactions.

The Synthesis of B2(SIDip)2 and its Reactivity Between the Diboracumulenic and Diborynic Extremes.

A new compound with the formula L-B2-L wherein the stabilizing ligand (L) is 1,3-bis[diisopropylphenyl]-4,5-dihydroimidazol-2-ylidene (SIDip) has been synthesized, isolated, and characterized. The π-acidity of the SIDip ligand, intermediate between the relatively non-acidic IDip (1,3-bis[diisopropylphenyl]imidazol-2-ylidene) ligand and the much more highly acidic CAAC (1-[2,6-diisopropylphenyl]-3,3,5,5-tetramethylpyrrolidin-2-ylidene) ligand, gives rise to a compound with spectroscopic, electrochemical, and structural properties between those of L-B2-L compounds stabilized by CAAC and IDip. Reactions of all three L-B2-L compounds with CO demonstrate the differences caused by their respective ligands, as the π-acidities of the CAAC and SIDip carbenes enabled the isolation of bis(boraketene) compounds (L(OC)B-B(CO)L), which could not be isolated from reactions with B2(IDip)2. However, only B2(IDip)2 and B2(SIDip)2 could be converted into bicyclic bis(boralactone) compounds.

Synthesis, structural characterization, and reactivity studies of 5-CF3SO3-B10H13.

In contrast to previous reactions carried out in cyclopentane solvent at room temperature that produced 6-TfO-B10H13 (TfO = CF3SO3), the reaction of closo-B10H10(2-) with a large excess of trifluoromethanesulfonic acid in the ionic liquid 1-butyl-3-methylimidazolium trifluoromethanesulfonate (bmimOTf) gave exclusively the previously unknown 5-TfO-B10H13 isomer. Experimental and computational studies demonstrated that the difference in the products of the two reactions is a result of 6-TfO-B10H13 isomerizing to 5-TfO-B10H13 above room temperature in bmimOTf solutions. Reactivity studies showed that 5-TfO-B10H13: (1) is deprotonated by reaction with 1,8-bis(dimethylamino)naphthalene to form the 5-TfO-B10H12(1-) anion; (2) reacts with alcohols to produce 6-RO-B10H13 boryl ethers (R = Me and 4-CH3O-C6H4); (3) undergoes olefin-hydroboration reactions to form 5-TfO-6,9-R2-B10H11 derivatives; and (4) forms a 5-TfO-6,9-(Me2S)2-B10H11 adduct at its Lewis acidic 6,9-borons upon reaction with dimethylsulfide. The 5-TfO-6,9-(Me2S)2-B10H11 adduct was also found to undergo alkyne-insertion reactions to form a range of previously unreported triflate-substituted 4-TfO-ortho-carboranes (1-R-4-TfO-1,2-C2B10H10) and reactions with triethylamine or ammonia to form the first TfO-substituted decaborate [R3NH(+)]2[2-TfO-B10H9(2-)], and [R3NH(+)]2[1-TfO-B10H9(2-)] (R = H, Et) salts.

Diborabutatriene: an electron-deficient cumulene.

The complexation of two equivalents of a cyclic (alkyl)(amino)carbene (CAAC) to tetrabromodiborane, followed by reduction with four equivalents of sodium naphthalide, led to the formation of the CAAC-stabilized linear diboracumulene (CAAC)2B2. The capacity of the CAAC ligand to facilitate B2 →CAAC donation of π-electron density resulted in important differences between this species and a previously reported complex featuring a B≡B triple bond stabilized by cyclic di(amino)carbenes, including a longer B-B bond and shorter B-C bonds. Frontier orbital analysis indicated sharing of valence electrons across the entire linear C-B-B-C unit in (CAAC)2B2, which is supported by natural population analysis and cyclic voltammetry.

Syntheses and characterizations of linear triborazanes.

Reaction of the amine boranes NH2(R)BH3, where R = H, Me, and Bz, with 1/3 equiv of sodium hexamethyldisilazane produced the five-membered, linear aminoborane anions Na(+)[BH3N(R)HBH2N(R)HBH3(-)], where R = H (1), Me (1Me), and benzyl (1Bz). Reactions of 1 and 1Me with ammonium chloride and methylammonium chloride, respectively, resulted in elimination of NaCl and H2 to produce the linear triborazanes BH3(RNHBH2)2N(R)H2, where R = H (2) and Me (2Me), with the structure of 2 crystallographically confirmed. The reactions of 1 and 1Me with pyridine-HCl produced the pyridine-capped aminoboranes H3B(RNHBH2)2(NC5H5), where R = H (3) and Me (3Me). 2 and 2Me proved to be stable up to 90 °C but produced a mixture of products when heated above 90 °C. 2 was selectively monochlorinated at the terminal boron when treated with 1 equiv of HCl and dichlorinated when reacted with a second 1 equiv of HCl.

Solid-state and solution-state coordination chemistry of lanthanide(III) complexes with α-hydroxyisobutyric acid.

Despite the wide range of applications of α-hydroxyisobutyric acid (HIBA) in biochemical processes, pharmaceutical formulations, and group and elemental separations of lanthanides and actinides, the structures and geometries of lanthanide-HIBA complexes are still not well understood. We reacted HIBA with lanthanides in aqueous solution at pH = 5 and synthesized 14 lanthanide-HIBA complexes of the formula [Ln(HIBA)(2)(H(2)O)(2)](NO(3))·H(2)O (Ln = La (1), Ce (2), Pr (3), Nd (4), Sm (5), Eu (6), Gd (7), Tb (8), Dy (9), Ho (10), Er (11), Tm (12), Yb (13), Lu (14)), isolating single crystals (1-7, 10, and 11) and powders (8, 9, and 12-14). Both single-crystal and powder X-ray diffraction studies reveal a two-dimensional extended structure across the entire lanthanide series. The environment around the eight-coordinated Ln(III) atom is best described as a distorted dodecahedron, where HIBA acts as a monoanionic tridentate ligand with one carboxylato oxygen atom and one hydroxyl oxygen atom chelating to one Ln(III) center. The carboxylato oxygen atom from a second HIBA ligand bridges to a neighboring Ln(III) atom to form a two-dimensional extended structure. While the coordination mode for HIBA is identical across the lanthanide series, three different structure types are found for La, Ce-Ho, and Er-Lu. Solution characterization using (13)C NMR further confirmed a single solution complex under the crystallization conditions. Raman and UV-vis-NIR absorbance and diffuse reflectance spectra of HIBA-Ln(III) complexes were also measured.