RESUMO
Herein, we report the synthesis of photoactive polymeric organo-sulfur (POS) materials. These polymers absorb light in the ultraviolet/visible and near-infrared region of the solar spectrum, and upon irradiation, they reduce water to hydrogen (H2 ). The decoration of POS materials with nitrile (-CN) groups is found to be the critical factor for enhanced interactions with the co-catalyst, Ni2 P, leading to greater H2 evolution rates compared to the nitrile-free POS material.
RESUMO
Zirconium and hafnium in the tetravalent oxidation state are considered the two most similar elements on the periodic table, based on their coexistence in nature and their identical solid-state chemistry. However, differentiating solution phase chemistry is crucial for their separation for nuclear applications that exploit the neutron capture of Hf and neutron transparency of Zr. Here we provide molecular level detail of the multiple factors that influence Zr/Hf separation in a long-exploited, empirically designed industrial solvent-extraction process that favors Hf extraction into an organic phase. In the aqueous solution, both Hf and Zr form an oxo-centered tetramer cluster with a core formula of [OM4(OH)6(NCS)12]4- (OM4-NCS, M = Hf, Zr). This was identified by single-crystal X-ray diffraction, as well as small-angle X-ray scattering (SAXS), of both the aqueous and organic phase. In addition to this phase, Zr also forms (1) a large oxo-cluster formulated [Zr48O30(OH)92(NCS)40(H2O)40] (Zr48) and (2) NCS adducts of OZr4-NCS. Zr48 was identified first by SAXS and then crystallized by exploiting favorable soft-metal bonding to the sulfur of NCS. While the large Zr48 likely cannot be extracted due to its larger size, the NCS adducts of OZr4-NCS are also less favorable to extraction due to the extra negative charge, which necessitates coextraction of an additional countercation (NH4+) per extra NCS ligand. Differentiating Zr and Hf coordination and hydrolysis chemistry adds to our growing understanding that these two elements, beyond simple solid-state chemistry, have notable differences in chemical reactivity.
RESUMO
Synthesizing functional materials from water contributes to a sustainable energy future. On the atomic level, water drives complex metal hydrolysis/condensation/speciation, acid-base, ion pairing, and solvation reactions that ultimately direct material assembly pathways. Here, we demonstrate the importance of Nb-polyoxometalate (Nb-POM) speciation in enabling deposition of Nb2O5, LiNbO3, and (Na, K)NbO3 (KNN) from high-concentration solutions, up to 2.5 M Nb for Nb2O5 and â¼1 M Nb for LiNbO3 and KNN. Deposition of KNN from 1 M Nb concentration represents a potentially important advancment in lead-free piezoelectrics, an application that requires thick films. Solution characterization via small-angle X-ray scattering and Raman spectroscopy described the speciation for all precursor solutions as the [HxNb24O72](x-24) POM, as did total pair distribution function analyses of X-ray scattering of amorphous gels prior to conversion to oxides. The tendency of the Nb24-POM to form extended networks without crystallization leads to conformal and well-adhered films. The films were characterized by X-ray diffraction, atomic force microscopy, scanning electron microscopy, ellipsometry, and X-ray photoelectron spectroscopy. As a strategy to convert aqueous deposition solutions from {Nb10}-POMs to {Nb24}-POMs, we devised a general procedure to produce doped Nb2O5 thin films including Ca, Ag, and Cu doping.
RESUMO
Crystallization at the solid-liquid interface is difficult to spectroscopically observe and therefore challenging to understand and ultimately control at the molecular level. The Ce70-torroid formulated [CeIV70(OH)36(O)64(SO4)60(H2O)10]4-, part of a larger emerging family of MIV70-materials (M = Zr, U, Ce), presents such an opportunity. We elucidated assembly mechanisms by the X-ray scattering (small-angle scattering and total scattering) of solutions and solids as well as crystallizing and identifying fragments of Ce70 by single-crystal X-ray diffraction. Fragments show evidence for templated growth (Ce5, [Ce5(O)3(SO4)12]10-) and modular assembly from hexamer (Ce6) building units (Ce13, [Ce13(OH)6(O)12(SO4)14(H2O)14]6- and Ce62, [Ce62(OH)30(O)58(SO4)58]14-). Ce62, an almost complete ring, precipitates instantaneously in the presence of ammonium cations as two torqued arcs that interlock by hydrogen boding through NH4+, a structural motif not observed before in inorganic systems. The room temperature rapid assemblies of both Ce70 and Ce62, respectively, by the addition of Li+ and NH4+, along with ion-exchange and redox behavior, invite exploitation of this emerging material family in environmental and energy applications.
RESUMO
The synthesis and solid-state characterization of a complete series of new heterometallic aqueous nanoscale Ga/In tridecameric clusters is presented. These hydroxo-aquo species significantly expand the library of discrete, aqueous group 13 clusters. This report details the synthetic and structural characterization of these compounds, which are of interest as precursors (inks) for thin-film oxides with materials applications. Single-crystal X-ray diffraction (XRD) data show that the hexagonal unit cell lengths of these clusters fall within the range a, b = 20.134-20.694 Å and c = 18.266-18.490 Å. The unit cell volumes become larger (V = 6494-6774 A(3)) with increasing indium occupancy. The compositions of several Ga/In clusters determined by electron probe microanalysis and elemental analysis are in agreement with single-crystal XRD results. The transformation of the Ga/In clusters to metal oxides at high temperature was studied using variable-temperature powder XRD. With heating, the Ga/In clusters with lower indium occupancies convert to the ß-Ga2O3 structure. For clusters with higher indium occupancies, phase separation occurs, and an In2O3 bixbyite-type structure forms. The stoichiometric control at the molecular level demonstrated herein is important in designing functional thin films of metal oxides due to the tunable nature of these heterometallic solution precursors. In addition, information about the solid-state structure of these compounds leads to a fundamental understanding of the materials properties of these clusters for future thin-film and precursor development.
RESUMO
Bismuth-oxocluster nodes for metal-organic frameworks (MOFs) and coordination networks/polymers are less prolific than other families featuring zinc, zirconium, titanium, lanthanides, etc. However, Bi3+ is non-toxic, it readily forms polyoxocations, and its oxides are exploited in photocatalysis. This family of compounds provides opportunity in medicinal and energy applications. Here, we show that Bi node nuclearity depends on solvent polarity, leading to a family of Bix-sulfonate/carboxylate coordination networks with x = 1-38. Larger nuclearity-node networks were obtained from polar and strongly coordinating solvents, and we attribute the solvent's ability to stabilize larger species in solution. The strong role of the solvent and the lesser role of the linker in defining node topologies differ from other MOF syntheses, and this is due to the Bi3+ intrinsic lone pair that leads to weak node-linker interactions. We describe this family by single-crystal X-ray diffraction (eleven structures), obtained in pure forms and high yields. Ditopic linkers include NDS (1,5-naphthalenedisulfonate), DDBS (2,2'-[biphenyl-4,4'-diylchethane-2,1-diyl] dibenzenesulphonate), and NH2-benzendicarboxylate (BDC). While the BDC and NDS linkers yield more open-framework topologies that resemble those obtained by carboxylate linkers, topologies with DDBS linkers appear to be in part driven by association between DDBS molecules. An in situ small-angle X-ray scattering study of Bi38-DDBS reveals stepwise formation, including Bi38-assembly, pre-organization in solution, followed by crystallization, confirming the less important role of the linker. We demonstrate photocatalytic hydrogen (H2) generation with select members of the synthesized materials without the benefit of a co-catalyst. Band gap determination from X-ray photoelectron spectroscopy (XPS) and UV-vis data suggest the DDBS linker effectively absorbs in the visible range with ligand-to-Bi-node charge transfer. In addition, materials containing more Bi (larger Bi38-nodes or Bi6 inorganic chains) exhibit strong UV absorption, also contributing to effective photocatalysis by a different mechanism. All tested materials became black with extensive UV-vis exposure, and XPS, transmission electron microscopy, and X-ray scattering of the black Bi38-framework suggest that Bi0 is formed in situ, without phase segregation. This evolution leads to enhanced photocatalytic performance, perhaps due to increased light absorption.
RESUMO
Peroxide ligation of aqueous metal-oxo clusters provides rich speciation and structural diversity, radiation sensitivity for manipulation with light, and both broadens and shifts pH-range stability. Here we demonstrate peroxide ligation of the polyoxometalate (POM) [Ta6O19]8-. We study in detail solution speciation of the peroxide-substituted cluster, and benchmark it to the peroxide-ligated niobate analogue, [Nb6O10(OH)3(O2)6]5-, whose solid-state structure has been reported. Raman and electrospray ionization mass spectroscopy do not detect any significant differences between the two analogues. However, small and wide-angle and total X-ray scattering strongly indicate that peroxide promotes linking of the hexameric tantalate clusters, rather than terminating and capping the clusters, as observed for the niobate analogue. We used computational studies to identify Raman peak positions, determine the energetics of exchange of oxo-ligands for peroxo-ligands, and provide models to help explain the X-ray scattering data. Understanding the solution speciation of peroxide-substituted polyoxotantalates is an important step towards its use in solution processed thin film materials, as well as developing new Ta-POM chemistry.
RESUMO
The study of structural properties of amorphous structures is complicated by the lack of long-range order and necessitates the use of both cutting-edge computer modeling and experimental techniques. With regards to the computer modeling, many questions on convergence arise when trying to assess the accuracy of a simulated system. What cell size maximizes the accuracy while remaining computationally efficient? More importantly, does averaging multiple smaller cells adequately describe features found in bulk amorphous materials? How small is too small? The aims of this work are: (1) to report a newly developed set of pair potentials for InGaZnO4 and (2) to explore the effects of structural parameters such as simulation cell size and numbers on the structural convergence of amorphous InGaZnO4. The total number of formula units considered over all runs is found to be the critical factor in convergence as long as the cell considered contains a minimum of circa fifteen formula units. There is qualitative agreement between these simulations and X-ray total scattering data - peak trends and locations are consistently reproduced while intensities are weaker. These new IGZO pair potentials are a valuable starting point for future structural refinement efforts.