Circularly Polarized Luminescence of Thiophene-Bridged Macrocyclic pseudo-meta [2.2]Paracyclophanes.

Chiral organic molecules possessing high quantum yields, circular dichroism, and circularly polarized luminescence values have great potential as optically active materials for future applications. Recently, the identification of a promising class of inherently chiral compounds was reported, namely macrocyclic 1,3-butadiyne-linked pseudo-meta[2.2]paracyclophanes, displaying high circular dichroism and related gabs values albeit modest quantum yields. Increasing the quantum yields in an attempt to get bright circularly polarized light emitters, the high-yielding heterocyclization of those 1,3-butadiyne bridges resulting in macrocyclic 2,5-thienyls-linked pseudo-meta [2.2]paracyclophanes is herein described. The chiroptical properties of both, the previously reported 1,3-butadiyne, and the novel 2,5-thienyl bridged macrocycles of various sizes, are experimentally recorded, and theoretically described using density-functional theory.

Ion-Selective Assembly of Supertetrahedral Selenido Germanate Clusters for Alkali Metal Ion Capture and Separation.

Supertetrahedral chalcogenido (semi)metalate cluster-based frameworks possess high selectivity for alkali metal cations, matching the specific charge density of their inner surfaces, which enables their use as ion-exchange materials. Aggregates of the supertetrahedral chalcogenido metalate cluster offer even new perspectives for metal ion capture and separation. Herein, we report on ionothermal preparation of two corresponding model compounds, (C2C1Im)7[Cs@GeII4(GeIV4Se10)4] (1) and (C2C1Im)10[Na5(CN)6@Cu6(Ge4Se10)4(Cu)] (2). Their formation is reliant on one specific cation type each, Cs+ for 1 and Na+ for 2, thus providing promising separation potential during crystallization. Compound 1 is based on the largest discrete binary selenido germanate cluster reported to date and the first mixed-valent chalcogenido germanate(II/IV) supertetrahedron. Moreover, it adds to the few examples of chalcogenides capable of capturing Cs+ ions. Its high selectivity for Cs+ compared to that of Li+, Na+, K+, and Rb+ was confirmed by single-crystal X-ray diffraction, energy-dispersive X-ray spectroscopy, and electrospray ionization mass spectrometry. Quantum chemical studies indicate that smaller ions, K+ and Rb+, could also be embedded in an isolated cluster assembly, but as the cluster aggregate slightly distorts for crystallization, the selectivity for Cs+ becomes exclusive in the salt. The anionic substructure of compound 2 is based on a two-dimensional network of supramolecular assemblies and exhibits an exclusive preference for Na+. This work thus provides the first comprehensive insight into the selective incorporation of specific alkali metal ions into supramolecular aggregates of supertetrahedral chalcogenide clusters, as a promising basis for new ion trapping techniques─especially for heavy alkali metal ions that pose environmental challenges.

Geländer Molecules with Orthogonal Joints: Synthesis of Macrocyclic Dimers.

Orthogonal joints, understood as connections with an angle of 90°, were introduced in the design of the "Geländer" model compounds 1 and 2. The banister, consisting of a conjugated carbazole dimer linked by either 1,3-butadiyne (2) or a single thiophene (1), wraps around an axis composed of a phthalimide dimer due to the dimensional mismatch of both subunits, which are interconnected by phenylene rungs. The "Geländer" structure was assembled from a monomer comprising the 1,4-diaminobenzene rung with one amino substituent as part of a 4-bromo phthalimide subunit forming the orthogonal junction to the axis, and the other as part of a masked 2-ethynyl carbazole as orthogonal joint to the banister. The macrocycle was obtained by two sequential homocoupling steps. A first dimerization by a reductive homocoupling assembled the axis, while an oxidative acetylene coupling served as ring-closing reaction. The formed butadiyne was further derivatized to a thiophene, rendering all carbons of the model compound sp2 hybridized. Both helical structures were fully characterized and chirally resolved. Assignment of the enantiomers was achieved by simulation of chiroptical properties and enantiopure synthesis.

Intense Molar Circular Dichroism in Fully Conjugated All-Carbon Macrocyclic 1,3-Butadiyne Linked pseudo-meta [2.2]Paracyclophanes.

Invited for the cover of this issue is the group of Marcel Mayor at the University of Basel with co-workers Olaf Fuhr and Dieter Fenske from Karlsruhe Institute of Technology. The image depicts the studied all-carbon polygon shaped macrocycles along with their intense circular dichroism spectra in the background. The bright light within the macrocycles displays its efficient conjugation. Read the full text of the article at 10.1002/chem.202201764.

Intense Molar Circular Dichroism in Fully Conjugated All-Carbon Macrocyclic 1,3-Butadiyne Linked pseudo-meta [2.2]Paracyclophanes.

The synthetic access to macrocyclic molecular topologies with interesting photophysical properties has greatly improved thanks to the successful implementation of organic and inorganic corner units. Based on recent reports, we realized that pseudo-meta [2.2]paracyclophanes (PCPs) might serve as optimal corner units for constructing 3D functional materials, owing to their efficient electronic communication, angled substituents and planar chirality. Herein, we report the synthesis, characterization and optical properties of four novel all-carbon enantiopure macrocycles bearing three to six pseudo-meta PCPs linked by 1,3-butadiyne units. The macrocycles were obtained by a single step from enantiopure, literature-known dialkyne pseudo-meta PCP and were unambiguously identified and characterized by state of the art spectroscopic methods and in part even by x-ray crystallography. By comparing the optical properties to relevant reference compounds, it is shown that the pseudo-meta PCP subunit effectively elongates the conjugated system throughout the macrocyclic backbone, such that already the smallest macrocycle consisting of only three subunits reaches a polymer-like conjugation length. Additionally, it is shown that the chiral pseudo-meta PCPs induce a remarkable chiroptical response in the respective macrocycles, reaching unprecedented high molar circular dichroism values for all-carbon macrocycles of up to 1307 L mol-1  cm-1 .

A Rare Flexible Metal-Organic Framework Based on a Tailorable Mn8 -Cluster Showing Smart Responsiveness to Aromatic Guests and Capacity for Gas Separation.

The design and creation of soft porous crystals combining regularity and flexibility may promote potential applications for gas storage and separation due to their deformable framework's responsiveness to external stimuli. The flexibility of metal-organic frameworks (MOFs) relies on alterable degrees of freedom that are mainly provided by organic linkers or the junctions linking organic and inorganic building units. Herein, we report a new dynamic MOF whose flexibility originates from an unprecedented tailorable Mn8 O38 -cluster and shows simultaneous coordination geometry changes and ligand migration that are reversibly driven by guest exchange. This provides an extra degree of freedom to the framework's deformation, resulting in three-dimensional variations in the framework that subtly respond to varied aromatic molecules. The gas adsorption behavior of this flexible MOF was evaluated, and the selective separation of light hydrocarbons and Freon gases is achieved.

Selectivity Reverse of Hydrosilylation of Aryl Alkenes Realized by Pyridine N-Oxide with [PSiP] Pincer Cobalt(III) Hydride as Catalyst.

Six silyl cobalt(III) hydrides 1-6 with [PSiP] pincer ligands having different substituents at the P and Si atoms ([(2-Ph2PC6H4)2MeSiCo(H)(Cl)(PMe3)] (1), [(2-Ph2PC6H4)2HSiCo(H)(Cl)(PMe3)] (2), [(2-Ph2PC6H4)2PhSiCo(H)(Cl)(PMe3)] (3), [(2-iPr2PC6H4)2HSiCo(H)(Cl)(PMe3)] (4), [(2-iPr2PC6H4)2MeSiCo(H)(Cl)(PMe3)] (5), and [(2-iPr2PC6H4)2PhSiCo(H)(Cl)(PMe3)] (6)) were synthesized through the reactions of the ligands (L1-L6) with CoCl(PMe3)3 via Si-H bond cleavage. Compounds 1-6 have catalytic activity for alkene hydrosilylation, and among them, complex 3 is the best catalyst with excellent anti-Markovnikov regioselectivity. A silyl dihydrido cobalt(III) complex 7 from the reaction of 3 with Ph2SiH2 was isolated, and its catalytic activity is equivalent to that of complex 3. Complex 7 and its derivatives 10-12 could also be obtained through the reactions of complexes 3, 1, 4, and 5 with NaBHEt3. The molecular structure of 7 was indirectly verified by the structures of 10-12. To our delight, the addition of pyridine N-oxide reversed the selectivity of the reaction, from anti-Markovnikov to Markovnikov addition. At the same time, the reaction temperature was reduced from 70 to 30 °C on the premise of high yield and excellent selectivity. However, this catalytic system is only applicable to aromatic alkenes. On the basis of the experimental information, two reaction mechanisms are proposed. The molecular structures of cobalt(III) complexes 3-6 and 10-12 were determined by single crystal X-ray diffraction analysis.

Synthesis and Transport Studies of a Cofacial Porphyrin Cyclophane.

Porphyrin cyclophane 1, consisting of two rigidly fixed but still movable cofacial porphyrins and exposing acetate-masked thiols in opposed directions of the macrocycle, is designed, synthesized, and characterized. The functional cyclophane 1, as pioneer of mechanosensitive 3D materials, forms stable single-molecule junctions in a mechanically controlled break-junction setup. Its reliable integration in a single-molecule junction is a fundamental prerequisite to explore the potential of these structures as mechanically triggered functional units and devices.

The Effect of Substituents on the Formation of Silyl [PSiP] Pincer Cobalt(I) Complexes and Catalytic Application in Both Nitrogen Silylation and Alkene Hydrosilylation.

Four different [PSiP]-pincer ligands L1-L4 ((2-Ph2PC6H4)2SiHR (R = H (L1) and Ph (L2)) and (2-iPr2PC6H4)2SiHR' (R' = Ph (L3) and H (L4)) were used to investigate the effect of substituents at P and/or Si atom of the [PSiP] pincer ligands on the formation of silyl cobalt(I) complexes by the reactions with CoMe(PMe3)4 via Si-H cleavage. Two penta-coordinated silyl cobalt(I) complexes, (2-Ph2PC6H4)2HSiCo(PMe3)2 (1) and (2-Ph2PC6H4)2PhSiCo(PMe3)2 (2), were obtained from the reactions of L1 and L2 with CoMe(PMe3)4, respectively. Under similar reaction conditions, a tetra-coordinated cobalt(I) complex (2-iPr2PC6H4)2PhSiCo(PMe3) (3) was isolated from the interaction of L3 with CoMe(PMe3)4. It was found that, only in the case of ligand L4, silyl dinitrogen cobalt(I) complex 4, [(2-iPr2PC6H4)2HSiCo(N2)(PMe3)], was formed. Our results indicate that the increasing of electron cloud density at the Co center is beneficial for the formation of a dinitrogen cobalt complex because the large electron density at Co center leads to the enhancement of the π-backbonding from cobalt to the coordinated N2. It was found that silyl dinitrogen cobalt(I) complex 4 is an effective catalyst for catalytic transformation of dinitrogen into silylamine. Among these four silyl cobalt(I) complexes, complex 1 is the best catalyst for hydrosilylation of alkenes with excellent regioselectivity. For aromatic alkenes, catalyst 1 provided Markovnikov products, while for aliphatic alkenes, anti-Markovnikov products could be obtained. Both catalytic reaction mechanisms were proposed and discussed. The molecular structures of complexes 1-4 were confirmed by single-crystal X-ray diffraction.

The periodic law of the chemical elements: 'The new system of atomic weights which renders evident the analogies which exist between bodies' [1].

The historical roots, the discovery and the modern relevance of Dmitri Mendeleev's remarkable advance have been the subject of numerous scholarly works. Here, with a brief overview, we hope to provide a link into the contents of this special issue honouring the great scientist. Mendeleev's advance, announced in March 1869, as he put it in 1889, to the '…then youthful Russian Chemical Society…', first set out the very basis of the periodic law of the chemical elements, the natural relation between the properties of the elements and their atomic weights. This was, and still is, the centrepiece of a historical journey for chemistry to today's position as a pre-eminent science. This article is part of the theme issue 'Mendeleev and the periodic table'.

Semiconductor Nanocrystal Engineering by Applying Thiol- and Solvent-Coordinated Cation Exchange Kinetics.

Thiol- and solvent-coordinated cation exchange kinetics have been applied to engineer the composition and crystallinity of novel nanocrystals. The detailed thermodynamics and kinetics of the reactions were explored by NMR spectroscopy, time-dependent photoluminescence (PL) characterizations and theoretical simulations. The fine structure of the colloidal semiconductor nanocrystals (CSNCs) was investigated by X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS). In this way, high-quality p-type Ag-doped ZnS quantum dots (QDs) and Au@ZnS hetero-nanocrystals with a cubic phase ZnS shell were synthesized successfully.The unprecedented dominant Ag+ -dopant-induced fluorescence and p-type conductivity in the zinc-blende ZnS are reported.

Dynamic Spacer Installation for Multirole Metal-Organic Frameworks: A New Direction toward Multifunctional MOFs Achieving Ultrahigh Methane Storage Working Capacity.

A robust Zr-MOF (LIFM-28) containing replaceable coordination sites for additional spacer installation has been employed to demonstrate a swing- or multirole strategy for multifunctional MOFs. Through reversible installation/uninstallation of two types of spacers with different lengths and variable functional groups, different tasks can be accomplished using the same parent MOF. An orthogonal optimizing method is applied with seven shorter (L1-7) and six longer (L8-13) spacers to tune the functionalities, achieving multipurpose switches among gas separation, catalysis, click reaction, luminescence, and particularly, ultrahigh methane storage working capacity at 5-80 bar and 298 K.

A Robust Metal-Organic Framework Combining Open Metal Sites and Polar Groups for Methane Purification and CO2 /Fluorocarbon Capture.

A 3D porous perchlorinated metal-organic framework (MOF), LIFM-26, featuring dual functionality, that is, functional polar groups and open metal sites, has been synthesized using perchlorinated linear dicarboxylate to link trigonal prismatic Fe3 (µ3 -O) units. LIFM-26 exhibits good thermal and chemical stability, and possesses high porosity with a BET surface area of 1513 m2 g-1 , compared with isoreticular MOF-235 and Fe3 O(F4 BDC)3 (H2 O)3 (F4 BDC=2,3,5,6-tetrafluorobenzene-1,4-dicarboxylate). Most strikingly, LIFM-26 features good gas sorption/separation performance at 298 K and 1 atm with IAST selectivity values reaching up to 36, 93, 23, 11, 46, and 202 for CO2 /CH4 , CO2 /N2 , C2 H4 /CH4 , C2 H6 /CH4 , C3 H8 /CH4 , and R22/N2 (R22=CHClF2 ), respectively, showing potential for use in biogas/natural gas purification and CO2 /R22 capture.

Investigation of Binding Behavior between Drug Molecule 5-Fluoracil and M4 L4 -Type Tetrahedral Cages: Selectivity, Capture, and Release.

Two analogous M4 L4 -type tetrahedral cages (smaller: MOC-19; larger: MOC-22) were synthesized and investigated for their interactions with the anticancer drug 5-fluoracil (5-FU) by NMR spectroscopy, high-resolution electrospray-ionization mass spectrometry (HR-ESI-MS), and molecular simulation. The cage's size and window are of importance for the host-guest binding, and consequently the smaller MOC-19 with a more suitable size of cavity window was found to have much stronger hydrogen-bond interactions with 5-FU. The porous nanoparticles of MOC-19 exhibited outstanding behavior for the controlled release of 5-FU in a simulated human body with liquid phosphate-buffered saline solution.

Adamantyl- and Furanyl-Protected Nanoscale Silver Sulfide Clusters.

The silver salts of 1-adamantanethiol (AdSH) and furan-2-ylmethanethiol (FurCH2 SH) were successfully applied as building blocks for ligand-protected Ag2 S nanoclusters. The reaction of the silver thiolates [AgSAd]x and [AgSCH2 Fur]x with S(SiMe3 )2 and 1,5-bis(diphenylphosphino)pentane (dpppt) afforded three different clusters with 58, 94 and, 190 silver atoms. The intensely colored compounds [Ag58 S13 (SAd)32 ] (1), [Ag94 S34 (SAd)26 (dpppt)6 ] (2), and [Ag190 S58 (SCH2 Fur)74 (dpppt)8 ] (3) were structurally characterized by single-crystal X-ray diffraction and exhibit different cluster core geometries and ligand shells. The diameters of the well-defined sphere-shaped nanoclusters range from 2.2 nm to 3.5 nm.

Precise Modulation of the Breathing Behavior and Pore Surface in Zr-MOFs by Reversible Post-Synthetic Variable-Spacer Installation to Fine-Tune the Expansion Magnitude and Sorption Properties.

To combine flexibility and modifiability towards a more controllable complexity of MOFs, a post-synthetic variable-spacer installation (PVSI) strategy is used to implement kinetic installation/ uninstallation of secondary ligands into/from a robust yet flexible proto-Zr-MOF. This PVSI process features precise positioning of spacers with different length, size, number, and functionality, enabling accurate fixation of successive breathing stages and fine-tuning of pore surface. It shows unprecedented synthetic tailorability to create complicated MOFs in a predictable way for property modification, for example, CO2 and R22 adsorption/separation, thermal/chemical stability, and extended breathing behavior.

Self-assembly of a highly organized, hexameric supramolecular architecture: formation, structure and properties.

Two derivatives, (3)L and (9)L, of a ditopic, multiply hydrogen-bonding molecule, known for more than a decade, have been found, in the solid state as well as in solvents of low polarity at room temperature, to exist not as monomers, but to undergo a remarkable self-assembly into a complex supramolecular species. The solid-state molecular structure of (3)L, determined by single-crystal X-ray crystallography, revealed that it forms a highly organized hexameric entity (3)L6 with a capsular shape, resulting from the interlocking of two sets of three monomolecular components, linked through hydrogen-bonding interactions. The complicated (1)H NMR spectra observed in o-dichlorobenzene (o-DCB) for (3)L and (9)L are consistent with the presence of a hexamer of D3 symmetry in both cases. DOSY measurements confirm the hexameric constitution in solution. In contrast, in a hydrogen-bond-disrupting solvent, such as DMSO, the (1)H NMR spectra are very simple and consistent with the presence of isolated monomers only. Extensive temperature-dependent (1)H NMR studies in o-DCB showed that the L6 species dissociated progressively into the monomeric unit on increasing th temperature, up to complete dissociation at about 90 °C. The coexistence of the hexamer and the monomer indicated that exchange was slow on the NMR timescale. Remarkably, no species other than hexamer and monomer were detected in the equilibrating mixtures. The relative amounts of each entity showed a reversible sigmoidal variation with temperature, indicating that the assembly proceeded with positive cooperativity. A full thermodynamic analysis has been applied to the data.

Chalcogenide clusters of copper and silver from silylated chalcogenide sources.

This review summarizes the rich structural variety of copper and silver chalcogenide clusters with protecting ligand shells of phosphane and/or organic ligands that were generated starting out from silylated chalcogenide sources. This route turned out to be fairly selective and thus allows for the isolation of uniform, polynuclear to nanosized cluster molecules that can consist of only a few or up to hundreds of metal atoms, being bridged by the chalcogen atoms. However, all of these clusters are only kinetically stable with respect to the formation of the binary coinage metal chalcogen phases, but do not collapse into the solid M(2)E materials owing to the protection by bulky ligands on the surface. Upon a more detailed analysis of the development of the structural properties with the cluster size, one recognizes differences for the particular M/E combinations: whereas copper chalcogenide and silver selenide clusters show a clear tendency to approach structural patterns of the Cu(2)E bulk, most obvious for the Cu/Se combination, this is not visible for silver sulfide clusters, even not at the largest species with 490 silver and 302 sulfur atoms. Besides the discussion on the structures of title compounds, the review presents insight into the bonding properties, reactivity, thermal and photophysical properties. The latter can be interpreted in terms of the quantum confinement effect, thus demonstrating the clusters to be understood as intermediates between mononuclear complexes and binary bulk phases.

Constructing single-chain magnets by supramolecular π-π stacking and spin canting: a case study on manganese(III) corroles.

A single-chain magnet (SCM) was constructed from manganese(III) 5,10,15-tris(pentafluorophenyl)corrole complex [Mn(III) (tpfc)] through supramolecular π-π stacking without bridging ligands. In the crystal structures, [Mn(tpfc)] molecules crystallized from different solvents, such as methanol, ethyl acetate, and ethanol, exhibit different molecular orientations and intermolecular π-π interaction or weak Mn⋅⋅⋅O interaction to form a supramolecular one-dimensional motif or dimer. These three complexes show very different magnetic behaviors at low temperature. Methanol solvate 1 shows obvious frequency dependence of out-of-phase alternating-current magnetic susceptibility below 2 K and a magnetization hysteresis loop with a coercive field of 400 Oe at 0.5 K. It is the first example of spin-canted supramolecular single-chain magnet due to weak π-π stacking interaction. By fitting the susceptibility data χ(M) T (20-300 K) of 1 with the spin Hamiltonian expression H = -2J Σ(i=1)(n-1) S(Ai) S(Ai+1) + D Σ(i) S((iZ)(2)), the intrachain magnetic coupling parameter transmitted by π-π interaction of -0.31 cm(-1) and zero field splitting parameter D of -2.59 cm(-1) are obtained. Ethyl acetate solvate 2 behaves as an antiferromagnetic chain without ordering or slow magnetic relaxation down to 0.5 K. The magnetic susceptibility data χ(M) T (20-300 K) of 2 was fitted by assuming the spin Hamiltonian H = -2JΣ(i=1)(n-1) S(Ai) S(Ai+1), and the intrachain antiferromagnetic coupling constant of -0.07 cm(-1) is much weaker than that of 1. Ethanol solvate 3 with a dimer motif shows field-induced single-molecule magnet like behavior below 2.5 K. The exchange coupling constant J within the dimer propagated by π-π interaction is -0.14 cm(-1) by fitting the susceptibility data χ(M) T (20-300 K) with the spin Hamiltonian H = -2J S(A) S(B) + ß(S((A)g(A)) + S((B)g(B)))H. The present studies open a new way to construct SCMs from anisotropic magnetic single-ion units through weak intermolecular interactions in the absence of bridging ligands.