RESUMO
Cancer survival rates in prepubertal girls and young women have risen in recent decades due to increasingly efficient treatments. However, many such treatments are gonadotoxic, causing premature ovarian insufficiency, loss of fertility, and ovarian endocrine function. Implantation of donor ovarian tissue encapsulated in immune-isolating capsules is a promising method to restore physiological endocrine function without immunosuppression or risk of reintroducing cancer cells harbored by the tissue. The success of this approach is largely determined by follicle density in the implanted ovarian tissue, which is analyzed manually from histologic sections and necessitates specialized, time-consuming labor. To address this limitation, we developed a fully automated method to quantify follicle density that does not require additional coding. We first analyzed ovarian tissue from 12 human donors between 16 and 37 years old using semi-automated image processing with manual follicle annotation and then trained artificial intelligence program based on follicle identification and object classification. One operator manually analyzed 102 whole slide images from serial histologic sections. Of those, 77 images were assessed by a second manual operator, followed with an automated method utilizing artificial intelligence. Of the 1181 follicles the control operator counted, the comparison operator counted 1178, and the artificial intelligence counted 927 follicles with 80% of those being correctly identified as follicles. The three-stage artificial intelligence pipeline finished 33% faster than manual annotation. Collectively, this report supports the use of artificial intelligence and automation to select tissue donors and grafts with the greatest follicle density to ensure graft longevity for premature ovarian insufficiency treatment.
Assuntos
Inteligência Artificial , Processamento de Imagem Assistida por Computador , Folículo Ovariano , Humanos , Feminino , Adulto , Adolescente , Processamento de Imagem Assistida por Computador/métodos , Adulto Jovem , Software , Ovário/transplanteRESUMO
STUDY DESIGN: Preclinical biomechanical study of topology optimization versus standard ring design for bioresorbable poly-ε-caprolactone (PCL) cervical spine fusion cages delivering bone morphogenetic protein-2 (BMP-2) using a porcine model. OBJECTIVE: The aim was to evaluate range of motion (ROM) and bone fusion, as a function of topology optimization and BMP-2 delivery method. SUMMARY OF BACKGROUND DATA: 3D printing technology enables fabrication of topology-optimized cages using bioresorbable materials, offering several advantages including customization, and lower stiffness. Delivery of BMP-2 using topology optimization may enhance the quality of fusion. METHODS: Twenty-two 6-month-old pigs underwent anterior cervical discectomy fusion at one level using 3D printed PCL cages. Experimental groups (N=6 each) included: Group 1: ring design with surface adsorbed BMP-2, Group 2: topology-optimized rectangular design with surface adsorbed BMP-2, and Group 3: ring design with BMP-2 delivery via collagen sponge. Additional specimens, two of each design, were implanted without BMP-2, as controls. Complete cervical segments were harvested six months postoperatively. Nanocomputed tomography was performed to assess complete bony bridging. Pure moment biomechanical testing was conducted in all three planes, separately. Continuous 3D motions were recorded and analyzed. RESULTS: Three subjects suffered early surgical complications and were not evaluated. Overall, ROM for experimental specimens, regardless of design or BMP-2 delivery method, was comparable, with no clinically significant differences among groups. Among experimental specimens at the level of the fusion, ROM was <1.0° in flexion and extension, indicative of fusion, based on clinically applied criteria for fusion of <2 to 4°. Despite the measured biomechanical stability, using computed tomography evaluation, complete bony bridging was observed in 40% of the specimens in Group 1, 50% of Group 2, 100% of Group 3, and none of the control specimens. CONCLUSION: A topology-optimized PCL cage with BMP-2 is capable of resulting in an intervertebral fusion, similar to a conventional ring-based design of the same bioresorbable material.
Assuntos
Vértebras Cervicais , Fusão Vertebral , Animais , Suínos , Vértebras Cervicais/cirurgia , Implantes Absorvíveis , Pescoço , Tomografia Computadorizada por Raios X , Impressão Tridimensional , Fusão Vertebral/métodos , Fenômenos Biomecânicos , Amplitude de Movimento ArticularRESUMO
Transplantation of allogeneic donor ovarian tissue holds great potential for female cancer survivors who often experience premature ovarian insufficiency. To avoid complications associated with immune suppression and to protect transplanted ovarian allografts from immune-mediated injury, we have developed an immunoisolating hydrogel-based capsule that supports the function of ovarian allografts without triggering an immune response. Encapsulated ovarian allografts implanted in naïve ovariectomized BALB/c mice responded to the circulating gonadotropins and maintained function for 4 months, as evident by regular estrous cycles and the presence of antral follicles in the retrieved grafts. In contrast to non-encapsulated controls, repeated implantations of encapsulated mouse ovarian allografts did not sensitize naïve BALB/c mice, which was confirmed with undetectable levels of alloantibodies. Further, encapsulated allografts implanted in hosts previously sensitized by the implantation of non-encapsulated allografts restored estrous cycles similarly to our results in naïve recipients. Next, we tested the translational potential and efficiency of the immune-isolating capsule in a rhesus monkey model by implanting encapsulated ovarian auto- and allografts in young ovariectomized animals. The encapsulated ovarian grafts survived and restored basal levels of urinary estrone conjugate and pregnanediol 3-glucuronide during the 4- and 5-month observation periods. We demonstrate, for the first time, that encapsulated ovarian allografts functioned for months in young rhesus monkeys and sensitized mice, while the immunoisolating capsule prevented sensitization and protected the allograft from rejection.
RESUMO
Female pediatric cancer survivors often develop Premature Ovarian Insufficiency (POI) owing to gonadotoxic effects of anticancer treatments. Here we investigate the use of a cell-based therapy consisting of human ovarian cortex encapsulated in a poly-ethylene glycol (PEG)-based hydrogel that replicates the physiological cyclic and pulsatile hormonal patterns of healthy reproductive-aged women. Human ovarian tissue from four donors was analyzed for follicle density, with averages ranging between 360 and 4414 follicles/mm3. Follicles in the encapsulated and implanted cryopreserved human ovarian tissues survived up to three months, with average follicle densities ranging between 2 and 89 follicles/mm3 at retrieval. We conclude that encapsulation of human ovarian cortex in PEG-based hydrogels did not decrease follicle survival after implantation in mice and was similar to non-encapsulated grafts. Furthermore, this approach offers the means to replace the endocrine function of the ovary tissue in patients with POI.
Assuntos
Folículo Ovariano , Insuficiência Ovariana Primária , Adulto , Animais , Cápsulas/farmacologia , Criança , Criopreservação , Feminino , Humanos , Camundongos , Insuficiência Ovariana Primária/induzido quimicamente , Insuficiência Ovariana Primária/terapiaRESUMO
OBJECTIVE: Ovarian tissue cryopreservation is one of the crucial options for fertility preservation. Transplantation of cryopreserved ovarian tissue was proven to restore ovarian endocrine function in patients with premature ovarian insufficiency. Ovaries from deceased donors potentially serve as an excellent and readily available tissue for the translational and basic research. In this study, we used ovaries obtained from 5 deceased donors aged 18-26 years, to evaluate the number and quality of ovarian follicles isolated before and after cryopreservation. DESIGN: Preclinical. SETTING: Academic biomedical research laboratory. PATIENTS: De-identified deceased human donors. INTERVENTIONS: Slow-freeze cryopreservation and thawing. MAIN OUTCOME MEASURES: Follicle count, follicle density, follicle viability using immunohistochemical staining (TUNEL). RESULTS: The follicle density negatively correlated with age in both cryopreserved/thawed and fresh group. A total of 2803 follicles from fresh and 1608 follicles from cryopreserved tissues were classified and analyzed using Hematoxylin and eosin staining. There was no significant difference in the percent of morphologically normal follicles between two groups. TUNEL assay indicated no higher DNA damage in the follicles and the stroma cells after cryopreservation. Morphologically normal preantral follicles were enzymatically isolated from both fresh and cryopreserved tissue with 88.51 ± 5.93% (mean ± SD) of the isolated follicles confirmed viable using LIVE/DEAD evaluation. CONCLUSIONS: Our results indicate the ovarian tissue from deceased donors maintain high quality after long time extracorporeal circulation and transportation from the hospital to the laboratory. High survival rate of follicles at different developmental stages suggested tolerance to the cryopreservation process. Human ovarian tissues obtained from deceased donors is an ample source tissue and can be applied to promoting research and future clinical applications.
Assuntos
Preservação da Fertilidade , Ovário , Criopreservação/métodos , Feminino , Preservação da Fertilidade/métodos , Congelamento , Humanos , Folículo OvarianoRESUMO
Additive manufacturing, or 3D printing, of the bioresorbable polymer [Formula: see text]-polycaprolactone (PCL) is an emerging tissue engineering solution addressing patient specific anatomies. Predictively modeling the mechanical behavior of 3D printed parts comprised of PCL improves the ability to develop patient specific devices that meet design requirements while reducing the testing of extraneous design variants and development time for emergency devices. Predicting mechanical behavior of 3D-printed devices is limited by the variability of effective material moduli that are determined in part by the 3D printing manufacturing process. Powder fusion methods, specifically laser sintering, are known to produce parts with internal porosity ultimately impacting the mechanical performance of printed devices. This study investigates the role of print direction and part size on the material and structural properties of laser sintered PCL parts. Solid PCL cylinders were printed in the XY (perpendicular to laser) and Z direction (parallel to laser), scanned using microcomputed tomography, and mechanically tested under compression. Compositional, structural, and functional properties of the printed parts were evaluated with differential scanning calorimetry, gel permeation chromatography, microcomputed tomography, and mechanical testing. Computational models of printed and scanned cylinders were fit to experimental data to derive effective moduli. Effective moduli were used to predict the mechanical behavior of splints used for emergency repair of severe tracheobronchomalacia. Laser sintering did not cause significant differences in polymer material properties compared to unmanufactured powder. Effective moduli (Eeff) were greater for larger part sizes (p < 0.01) and for parts oriented in the XY direction compared to the Z direction (p < 0.001). These dependencies were congruent with the differences in void volumes associated with the print direction (p < 0.01) and part size (p < 0.01). Finite element models of splint parallel compression tests utilizing the Eeff dependent on print direction and size agreed with experimental closed compression tests of splints. Evaluating the microstructural properties of printed parts and selecting effective moduli for finite element models based on manufacturing parameters allows accurate prediction of device performance. These findings allow testing of a greater number of device design variants in silico to accomodate patient specific anatomies towards providing higher quality parts while lowering overall time and costs of manufacturing and testing.
Assuntos
Materiais Biocompatíveis , Poliésteres , Desenho de Equipamento , Análise de Elementos Finitos , Humanos , Lasers , Teste de Materiais , Modelagem Computacional Específica para o Paciente , Engenharia TecidualRESUMO
Regenerative medicine approaches for massive craniomaxillofacial (CMF) bone defects face challenges associated with the scale of missing bone, the need for rapid graft-defect integration, and challenges related to inflammation and infection. Mineralized collagen scaffolds have been shown to promote mesenchymal stem cell osteogenesis due to their porous nature and material properties, but are mechanically weak, limiting surgical practicality. Previously, these scaffolds were combined with 3D-printed polycaprolactone (PCL) mesh to form a scaffold-mesh composite to increase strength and promote bone formation in sub-critical sized porcine ramus defects. Here, we compare the performance of mineralized collagen-PCL composites to the PCL mesh in a critical-sized porcine ramus defect model. While there were no differences in overall healing response between groups, our data demonstrated broadly variable metrics of healing regarding new bone infiltration and fibrous tissue formation. Abscesses were present surrounding some implants and PCL polymer was still present after 9-10 months of implantation. Overall, while there was limited successful healing, with 2 of 22 implants showed substantial levels of bone regeneration, and others demonstrating some form of new bone formation, the results suggest targeted improvements to improve repair of large animal models to more accurately represent CMF bone healing. Notably, strategies to increase osteogenesis throughout the implant, modulate the immune system to support repair, and employ shape-fitting tactics to avoid implant micromotion and resultant fibrosis. Improvements to the mineralized collagen scaffolds involve changes in pore size and shape to increase cell migration and osteogenesis and inclusion or delivery of factors to aid vascular ingrowth and bone regeneration.
Assuntos
Materiais Biocompatíveis , Alicerces Teciduais , Animais , Materiais Biocompatíveis/farmacologia , Regeneração Óssea , Colágeno/farmacologia , Osteogênese , Poliésteres , SuínosRESUMO
The present study utilizes image-based computational methods and indirect solid freeform fabrication (SFF) technique to design and fabricate porous scaffolds, and then computationally estimates their elastic modulus and yield stress with experimental validation. 50:50 Poly (lactide-co-glycolide acid) (50:50 PLGA) porous scaffolds were designed using an image-based design technique, fabricated using indirect SFF technique, and characterized using micro-computed tomography (micro-CT) and mechanical testing. Micro-CT data was further used to non-destructively predict the scaffold elastic moduli and yield stress using a voxel-based finite element (FE) method, a technique that could find application in eventual scaffold quality control. Micro-CT data analysis confirmed that the fabricated scaffolds had controlled pore sizes, orthogonally interconnected pores and porosities which were identical to those of the designed files. Mechanical tests revealed that the compressive modulus and yield stresses were in the range of human trabecular bone. The results of FE analysis showed potential stress concentrations inside of the fabricated scaffold due to fabrication defects. Furthermore, the predicted moduli and yield stresses of the FE analysis showed strong correlations with those of the experiments. In the present study, we successfully fabricated scaffolds with designed architectures as well as predicted their mechanical properties in a nondestructive manner.
Assuntos
Osso e Ossos , Simulação por Computador , Ácido Láctico/química , Ácido Láctico/síntese química , Ácido Poliglicólico/química , Ácido Poliglicólico/síntese química , Engenharia Tecidual/métodos , Alicerces Teciduais , Substitutos Ósseos/síntese química , Substitutos Ósseos/química , Osso e Ossos/fisiologia , Força Compressiva , Análise de Elementos Finitos , Humanos , Teste de Materiais , Modelos Biológicos , Concentração Osmolar , Copolímero de Ácido Poliláctico e Ácido Poliglicólico , Porosidade , Desenho de Prótese/métodos , Estresse Mecânico , Alicerces Teciduais/químicaRESUMO
OBJECTIVES/HYPOTHESIS: To report the clinical safety and efficacy of three-dimensional (3D)-printed, patient-specific, bioresorbable airway splints in a cohort of critically ill children with severe tracheobronchomalacia. STUDY DESIGN: Case series. METHODS: From 2012 to 2018, 15 subjects received 29 splints on their trachea, right and/or left mainstem bronchi. The median age at implantation was 8 months (range, 3-25 months). Nine children were female. Five subjects had a history of extracorporeal membrane oxygenation (ECMO), and 11 required continuous sedation, six of whom required paralytics to maintain adequate ventilation. Thirteen were chronically hospitalized, unable to be discharged, and seven were hospitalized their entire lives. At the time of splint implantation, one subject required ECMO, one required positive airway pressure, and 13 subjects were tracheostomy and ventilator dependent, requiring a median positive end-expiratory pressure (PEEP) of 14 cm H2 O (range, 6-20 cm H2 0). Outcomes collected included level of respiratory support, disposition, and splint-related complications. RESULTS: At the time of discharge from our institution, at a median of 28 days postimplantation (range, 10-56 days), the subject on ECMO was weaned from extracorporeal support, and the subjects who were ventilated via tracheostomy had a median change in PEEP (discharge-baseline) of -2.5 cm H2 O (range, -15 to 2 cm H2 O, P = .022). At median follow-up of 8.5 months (range, 0.3-77 months), all but one of the 12 surviving subjects lives at home. Of the 11 survivors who were tracheostomy dependent preoperatively, one is decannulated, one uses a speaking valve, six use a ventilator exclusively at night, and three remain ventilator dependent. CONCLUSIONS: This case series demonstrates the initial clinical efficacy of the 3D-printed bioresorbable airway splint device in a cohort of critically ill children with severe tracheobronchomalacia. LEVEL OF EVIDENCE: 4 Laryngoscope, 129:1763-1771, 2019.
Assuntos
Implantes Absorvíveis , Manuseio das Vias Aéreas/instrumentação , Impressão Tridimensional , Contenções , Traqueobroncomalácia/cirurgia , Pré-Escolar , Estudos de Coortes , Oxigenação por Membrana Extracorpórea , Feminino , Humanos , Lactente , Masculino , Respiração com Pressão Positiva , Traqueia/cirurgia , Resultado do TratamentoRESUMO
OBJECTIVE: This study aims to determine the effect of auricular scaffold microarchitecture on chondrogenic potential in an in vivo animal model. METHODS: DICOM computed tomography (CT) images of a human auricle were segmented to create an external anatomic envelope. Image-based design was used to generate 1) orthogonally interconnected spherical pores and 2) randomly interspersed pores, and each were repeated in three dimensions to fill the external auricular envelope. These auricular scaffolds were then 3D printed by laser sintering poly-l-caprolactone, seeded with primary porcine auricular chondrocytes in a hyaluronic acid/collagen hydrogel and cultured in a pro-chondrogenic medium. The auricular scaffolds were then implanted subcutaneously in rats and explanted after 4 weeks for analysis with Safranin O and Hematoxylin and Eosin staining. RESULTS: Auricular constructs with two micropore architectures were rapidly manufactured with high fidelity anatomic appearance. Subcutaneous implantation of the scaffolds resulted in excellent external appearance of both anterior and posterior auricular surfaces. Analysis on explantation showed that the defined, spherical micropore architecture yielded histologic evidence of more robust chondrogenic tissue formation as demonstrated by Safranin O and Hematoxylin and Eosin staining. CONCLUSIONS: Image-based computer-aided design and 3D printing offers an exciting new avenue for the tissue-engineered auricle. In early pilot work, creation of spherical micropores within the scaffold architecture appears to impart greater chondrogenicity of the bioscaffold. This advantage could be related to differences in permeability allowing greater cell migration and nutrient flow, differences in surface area allowing different cell aggregation, or a combination of both factors. The ability to design an anatomically correct scaffold that maintains its structural integrity while also promoting auricular cartilage growth represents an important step towards clinical applicability of this new technology.
Assuntos
Pavilhão Auricular/cirurgia , Procedimentos de Cirurgia Plástica/métodos , Engenharia Tecidual/métodos , Alicerces Teciduais/química , Animais , Células Cultivadas , Condrócitos/citologia , Desenho Assistido por Computador , Cartilagem da Orelha/citologia , Humanos , Impressão Tridimensional , Próteses e Implantes , Ratos , Suínos , Tomografia Computadorizada por Raios XRESUMO
A tissue engineering approach to address craniofacial defects requires a biomaterial that balances macro-scale mechanical stiffness and strength with the micron-scale features that promote cell expansion and tissue biosynthesis. Such criteria are often in opposition, leading to suboptimal mechanical competence or bioactivity. We report the use of a multiscale composite biomaterial that integrates a polycaprolactone (PCL) reinforcement structure with a mineralized collagen-glycosaminoglycan scaffold to circumvent conventional tradeoffs between mechanics and bioactivity. The composite promotes activation of the canonical bone morphogenetic protein 2 (BMP-2) pathway and subsequent mineralization of adipose-derived stem cells in the absence of supplemental BMP-2 or osteogenic media. We subsequently examined new bone infill in the acellular composite, scaffold alone, or PCL support in 10 mm dia. ramus mandibular defects in Yorkshire pigs. We report an analytical approach to quantify radial, angular, and depth bone infill from micro-computed tomography data. The collagen-PCL composite showed improved overall infill, and significantly increased radial and angular bone infill versus the PCL cage alone. Bone infill was further enhanced in the composite for defects that penetrated the medullary cavity, suggesting recruitment of marrow-derived cells. These results indicate a multiscale mineralized collagen-PCL composite offers strategic advantages for regenerative repair of craniofacial bone defects.
Assuntos
Colágeno/química , Doenças Mandibulares/tratamento farmacológico , Poliésteres/química , Animais , Osso e Ossos/patologia , Doenças Mandibulares/metabolismo , Suínos , Cicatrização/efeitos dos fármacosRESUMO
Scaffold design incorporating multiscale cues for clinically relevant, aligned tissue regeneration has potential to improve structural and functional integrity of multitissue interfaces. The objective of this preclinical study is to develop poly(ε-caprolactone) (PCL) scaffolds with mesoscale and microscale architectural cues specific to human ligament progenitor cells and assess their ability to form aligned bone-ligament-cementum complexes in vivo. PCL scaffolds are designed to integrate a 3D printed bone region with a micropatterned PCL thin film consisting of grooved pillars. The patterned film region is seeded with human ligament cells, fibroblasts transduced with bone morphogenetic protein-7 genes seeded within the bone region, and a tooth dentin segment positioned on the ligament region prior to subcutaneous implantation into a murine model. Results indicate increased tissue alignment in vivo using micropatterned PCL films, compared to random-porous PCL. At week 6, 30 µm groove depth significantly enhances oriented collagen fiber thickness, overall cell alignment, and nuclear elongation relative to 10 µm groove depth. This study demonstrates for the first time that scaffolds with combined hierarchical mesoscale and microscale features can align cells in vivo for oral tissue repair with potential for improving the regenerative response of other bone-ligament complexes.
Assuntos
Poliésteres/química , Impressão Tridimensional , Alicerces Teciduais , Animais , Proteína Morfogenética Óssea 7/genética , Proteína Morfogenética Óssea 7/metabolismo , Regeneração Óssea/fisiologia , Osso e Ossos/diagnóstico por imagem , Osso e Ossos/patologia , Células Cultivadas , Colágeno/química , Modelos Animais de Doenças , Humanos , Camundongos , Microscopia de Fluorescência , Ligamento Periodontal/citologia , Ligamento Periodontal/metabolismo , Ligamento Periodontal/transplante , Microtomografia por Raio-XRESUMO
Despite significant advances in 3D biomaterial printing, the potential of 3D printing for patient specific implants and tissue reconstruction has not been fully exploited. This is due in part to the lack of integration of image-based patient specific design with 3D biomaterial printing within a relevant regulatory framework, namely design control, required by the FDA. In this manuscript, we describe the integration of image-based, multi-scale patient specific design with 3D biomaterial printing within a design control framework for clinical translation. Specifically, we define design inputs for patient specific implants and scaffolds, and utilize image-based patient specific design to achieve these design inputs. We then illustrate realization of these topology designed patient specific implants by laser sintering of polycaprolactone (PCL). Finally, we present initial results in large animal models using 3D printed PCL implants addressing two challenging problems in tissue reconstruction: 1) designing and 3D printing implantable devices to allow growth in pediatric airway applications and 2) utilizing 3D printed scaffolds as foundations for pre-fabricated flaps to obtain vascularization and bone formation for large volume bone/soft tissue reconstruction. We illustrate these challenging problems as they need to be incorporated in design control, but as of yet there is little data to direct how growth and vascularization should be utilized in design control.
RESUMO
Polycaprolactone (PCL) is a bioresorbable polymer with potential applications for bone and cartilage repair. In this work, porous PCL scaffolds were computationally designed and then fabricated via selective laser sintering (SLS), a rapid prototyping technique. The microstructure and mechanical properties of the fabricated scaffolds were assessed and compared to the designed porous architectures and computationally predicted properties. Scaffolds were then seeded with bone morphogenetic protein-7 (BMP-7) transduced fibroblasts and implanted subcutaneously to evaluate biological properties and to demonstrate tissue in-growth. The work done illustrates the ability to design and fabricate PCL scaffolds with porous architecture that have sufficient mechanical properties for bone tissue engineering applications using SLS. Compressive modulus and yield strength values ranged from 52 to 67 MPa and 2.0 to 3.2 Mpa, respectively, lying within the lower range of properties reported for human trabecular bone. Finite element analysis (FEA) results showed that mechanical properties of scaffold designs and of fabricated scaffolds can be computationally predicted. Histological evaluation and micro-computed tomography (microCT) analysis of implanted scaffolds showed that bone can be generated in vivo. Finally, to demonstrate the clinical application of this technology, we designed and fabricated a prototype mandibular condyle scaffold based on an actual pig condyle. The integration of scaffold computational design and free-form fabrication techniques presented here could prove highly useful for the construction of scaffolds that have anatomy specific exterior architecture derived from patient CT or MRI data and an interior porous architecture derived from computational design optimization.
Assuntos
Bioprótese , Substitutos Ósseos/química , Fibroblastos/citologia , Fibroblastos/fisiologia , Osteoblastos/citologia , Osteoblastos/fisiologia , Poliésteres/química , Engenharia Tecidual/métodos , Animais , Técnicas de Cultura de Células/métodos , Diferenciação Celular/fisiologia , Proliferação de Células , Sobrevivência Celular , Células Cultivadas , Simulação por Computador , Desenho Assistido por Computador , Elasticidade , Estudos de Viabilidade , Regeneração Tecidual Guiada/instrumentação , Regeneração Tecidual Guiada/métodos , Temperatura Alta , Humanos , Lasers , Côndilo Mandibular/citologia , Côndilo Mandibular/fisiologia , Modelos Biológicos , Poliésteres/análise , Desenho de Prótese/métodos , Suínos , Porco MiniaturaRESUMO
BACKGROUND: One strategy to reconstruct large bone defects is to prefabricate a vascularized flap by implanting a biomaterial scaffold with associated biologics into the latissimus dorsi and then transplanting this construct to the defect site after a maturation period. This strategy, similar to all clinically and regulatory feasible biologic approaches to surgical reconstruction, requires the ability to quickly (<1 h within an operating room) and efficiently bind biologics to scaffolds. It also requires the ability to localize biologic delivery. In this study, we investigated the efficacy of binding bone morphogenetic protein-2 (BMP2) to poly-É-caprolactone (PCL) using adsorption and conjugation as a function of time. METHODS: BMP2 was adsorbed (Ads) or conjugated (Conj) to PCL scaffolds with the same three-dimensional printed architecture while altering exposure time (0.5, 1, 5, and 16 h), temperature (4°C, 23°C), and BMP2 concentration (1.4, 5, 20, and 65 µg/mL). The in vitro release was quantified, and C2C12 cell alkaline phosphatase (ALP) expression was used to confirm bioactivity. Scaffolds with either 65 or 20 µg/mL Ads or Conj BMP2 for 1 h at 23°C were implanted subcutaneously in mice to evaluate in vivo bone regeneration. Micro-computed tomography, compression testing, and histology were performed to characterize bone regeneration. RESULTS: After 1 h exposure to 65 µg/mL BMP2 at 23°C, Conj and Ads resulted in 12.83 ± 1.78 and 10.78 ± 1.49 µg BMP2 attached, respectively. Adsorption resulted in a positive ALP response and had a small burst release; whereas conjugation provided a sustained release with negligible ALP production, indicating that the conjugated BMP2 may not be bioavailable. Adsorbed 65 µg/mL BMP2 solution resulted in the greatest regenerated bone volume (15.0 ± 3.0 mm³), elastic modulus (20.1 ± 3.0 MPa), and %bone ingrowth in the scaffold interior (17.2% ± 5.4%) when compared with conjugation. CONCLUSION: Adsorption may be optimal for the clinical application of prefabricating bone flaps due to BMP2 binding in a short exposure time, retained BMP2 bioactivity, and bone growth adhering to scaffold geometry and into pores with healthy marrow development.
Assuntos
Proteína Morfogenética Óssea 2/química , Osso e Ossos/metabolismo , Poliésteres/química , Adsorção , Fosfatase Alcalina/metabolismo , Animais , Proteína Morfogenética Óssea 2/administração & dosagem , Regeneração Óssea , Osso e Ossos/citologia , Células Cultivadas , Força Compressiva , Humanos , Cinética , Camundongos , Porosidade , Estresse Mecânico , Temperatura , Alicerces Teciduais/química , Microtomografia por Raio-XRESUMO
Bone scaffolds for tissue regeneration require an optimal trade-off between biological and mechanical criteria. Optimal designs may be obtained using topology optimization (homogenization approach) and prototypes produced using additive manufacturing techniques. However, the process from design to manufacture remains a research challenge and will be a requirement of FDA design controls to engineering scaffolds. This work investigates how the design to manufacture chain affects the reproducibility of complex optimized design characteristics in the manufactured product. The design and prototypes are analyzed taking into account the computational assumptions and the final mechanical properties determined through mechanical tests. The scaffold is an assembly of unit-cells, and thus scale size effects on the mechanical response considering finite periodicity are investigated and compared with the predictions from the homogenization method which assumes in the limit infinitely repeated unit cells. Results show that a limited number of unit-cells (3-5 repeated on a side) introduce some scale-effects but the discrepancies are below 10%. Higher discrepancies are found when comparing the experimental data to numerical simulations due to differences between the manufactured and designed scaffold feature shapes and sizes as well as micro-porosities introduced by the manufacturing process. However good regression correlations (R(2) > 0.85) were found between numerical and experimental values, with slopes close to 1 for 2 out of 3 designs.
Assuntos
Materiais Biocompatíveis , Osso e Ossos/citologia , Teste de Materiais , Fenômenos Mecânicos , Engenharia Tecidual , Alicerces TeciduaisRESUMO
OBJECTIVE: To determine the potential of an integrated, image-based computer-aided design (CAD) and 3-dimensional (3D) printing approach to engineer scaffolds for head and neck cartilaginous reconstruction for auricular and nasal reconstruction. STUDY DESIGN: Proof of concept revealing novel methods for bioscaffold production with in vitro and in vivo animal data. SETTING: Multidisciplinary effort encompassing 2 academic institutions. SUBJECTS AND METHODS: Digital Imaging and Communications in Medicine (DICOM) computed tomography scans were segmented and utilized in image-based CAD to create porous, anatomic structures. Bioresorbable polycaprolactone scaffolds with spherical and random porous architecture were produced using a laser-based 3D printing process. Subcutaneous in vivo implantation of auricular and nasal scaffolds was performed in a porcine model. Auricular scaffolds were seeded with chondrogenic growth factors in a hyaluronic acid/collagen hydrogel and cultured in vitro over 2 months' duration. RESULTS: Auricular and nasal constructs with several types of microporous architecture were rapidly manufactured with high fidelity to human patient anatomy. Subcutaneous in vivo implantation of auricular and nasal scaffolds resulted in an excellent appearance and complete soft tissue ingrowth. Histological analysis of in vitro scaffolds demonstrated native-appearing cartilaginous growth that respected the boundaries of the scaffold. CONCLUSION: Integrated, image-based CAD and 3D printing processes generated patient-specific nasal and auricular scaffolds that supported cartilage regeneration.
Assuntos
Bioprótese , Desenho Assistido por Computador , Orelha/cirurgia , Nariz/cirurgia , Procedimentos de Cirurgia Plástica/métodos , Impressão Tridimensional , Alicerces Teciduais , Animais , Face , Humanos , Crânio , SuínosRESUMO
Poly-É-caprolactone (PCL) is a biocompatible polymer that has mechanical properties suitable for bone tissue engineering; however, it must be integrated with biologics to stimulate bone formation. Bone morphogenetic protein-2 (BMP2) delivered from PCL produces bone when implanted subcutaneously, and erythropoietin (EPO) works synergistically with BMP2. In this study, EPO and BMP2 are adsorbed separately on two 3D-printed PCL scaffold modules that are assembled for codelivery on a single scaffold structure. This assembled modular PCL scaffold with dual BMP2 and EPO delivery was shown to increase bone growth in an ectopic location when compared with BMP2 delivery along a replicate scaffold structure. EPO (200 IU/mL) and BMP2 (65 µg/mL) were adsorbed onto the outer and inner portions of a modular scaffold, respectively. Protein binding and release studies were first quantified. Subsequently, EPO+BMP2 and BMP2 scaffolds were implanted subcutaneously in mice for 4 and 8 weeks, and the regenerated bone was analyzed with microcomputed tomography and histology; 8.6±1.4 µg BMP2 (22%) and 140±29 IU EPO (69.8%) bound to the scaffold and <1% BMP2 and 83% EPO was released in 7 days. Increased endothelial cell proliferation on EPO-adsorbed PCL discs indicated protein bioactivity. At 4 and 8 weeks, dual BMP2 and EPO delivery regenerated more bone (5.1±1.1 and 5.5±1.6 mm(3)) than BMP2 alone (3.8±1.1 and 4.3±1.7 mm(3)). BMP2 and EPO scaffolds had more ingrowth (1.4%±0.6%) in the outer module when compared with BMP2 (0.8%±0.3%) at 4 weeks. Dual delivery produced more dense cellular marrow, while BMP2 had more fatty marrow. Dual EPO and BMP2 delivery is a potential method to regenerate bone faster for prefabricated flaps.
Assuntos
Proteína Morfogenética Óssea 2/farmacologia , Osso e Ossos/efeitos dos fármacos , Sistemas de Liberação de Medicamentos , Eritropoetina/farmacologia , Osteogênese/efeitos dos fármacos , Poliésteres/química , Alicerces Teciduais/química , Animais , Densidade Óssea/efeitos dos fármacos , Regeneração Óssea/efeitos dos fármacos , Osso e Ossos/diagnóstico por imagem , Feminino , Células Endoteliais da Veia Umbilical Humana , Cinética , Camundongos Endogâmicos C57BL , Tamanho do Órgão/efeitos dos fármacos , Ligação Proteica/efeitos dos fármacos , Microtomografia por Raio-XRESUMO
OBJECTIVES/HYPOTHESIS: The mechanical properties of normal auricular cartilage provide a benchmark against which to characterize changes in auricular structure/function due to genetic defects creating phenotypic abnormalities in collagen subtypes. Such properties also provide inputs/targets for auricular reconstruction scaffold design. Several studies report the biomechanical properties for septal, costal, and articular cartilage. However, analogous data for auricular cartilage are lacking. Therefore, our aim in this study was to characterize both whole-ear and auricular cartilage mechanics by mechanically testing specimens and fitting the results to nonlinear constitutive models. STUDY DESIGN: Mechanical testing of whole ears and auricular cartilage punch biopsies. METHODS: Whole human cadaveric ear and auricular cartilage punch biopsies from both porcine and human cartilage were subjected to whole-ear helix-down compression and quasistatic unconfined compression tests. Common hyperelastic constitutive laws (widely used to characterize soft tissue mechanics) were evaluated for their ability to represent the stress-strain behavior of auricular cartilage. RESULTS: Load displacement curves for whole ear testing exhibited compliant linear behavior until after significant displacement where nonlinear stiffening occurred. All five commonly used two-term hyperelastic soft tissue constitutive models successfully fit both human and porcine nonlinear elastic behavior (mean R(2) fit >0.95). CONCLUSIONS: Auricular cartilage exhibits nonlinear strain-stiffening elastic behavior that is similar to other soft tissues in the body. The whole ear exhibits compliant behavior with strain stiffening at high displacement. The constants from the hyperelastic model fits provide quantitative baselines for both human and porcine (a commonly used animal model for auricular tissue engineering) auricular mechanics. LEVEL OF EVIDENCE: NA
Assuntos
Cartilagem da Orelha/citologia , Cartilagem da Orelha/fisiologia , Idoso , Idoso de 80 Anos ou mais , Animais , Fenômenos Biomecânicos , Biópsia , Cadáver , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Valores de Referência , SuínosRESUMO
Recently, as an alternative to metal spinal fusion cages, 3D printed bioresorbable materials have been explored; however, the static and fatigue properties of these novel cages are not well known. Unfortunately, current ASTM testing standards used to determine these properties were designed prior to the advent of bioresorbable materials for cages. Therefore, the applicability of these standards for bioresorbable materials is unknown. In this study, an image-based topology and a conventional 3D printed bioresorbable poly(ε)-caprolactone (PCL) cervical cage design were tested in compression, compression-shear, and torsion, to establish their static and fatigue properties. Difficulties were in fact identified in establishing failure criteria and in particular determining compressive failure load. Given these limitations, under static loads, both designs withstood loads of over 650 N in compression, 395 N in compression-shear, and 0.25 Nm in torsion, prior to yielding. Under dynamic testing, both designs withstood 5 million (5M) cycles of compression at 125% of their respective yield forces. Geometry significantly affected both the static and fatigue properties of the cages. The measured compressive yield loads fall within the reported physiological ranges; consequently, these PCL bioresorbable cages would likely require supplemental fixation. Most importantly, supplemental testing methods may be necessary beyond the current ASTM standards, to provide more accurate and reliable results, ultimately improving preclinical evaluation of these devices.