H2 Evolution from Electrocatalysts with Redox-Active Ligands: Mechanistic Insights from Theory and Experiment vis-à-vis Co-Mabiq.

Electrocatalytic hydrogen production via transition metal complexes offers a promising approach for chemical energy storage. Optimal platforms to effectively control the proton and electron transfer steps en route to H2 evolution still need to be established, and redox-active ligands could play an important role in this context. In this study, we explore the role of the redox-active Mabiq (Mabiq = 2-4:6-8-bis(3,3,4,4-tetramethlyldihydropyrrolo)-10-15-(2,2-biquinazolino)-[15]-1,3,5,8,10,14-hexaene1,3,7,9,11,14-N6) ligand in the hydrogen evolution reaction (HER). Using spectro-electrochemical studies in conjunction with quantum chemical calculations, we identified two precatalytic intermediates formed upon the addition of two electrons and one proton to [CoII(Mabiq)(THF)](PF6) (CoMbq). We further examined the acid strength effect on the generation of the intermediates. The generation of the first intermediate, CoMbq-H1, involves proton addition to the bridging imine-nitrogen atom of the ligand and requires strong proton activity. The second intermediate, CoMbq-H2, acquires a proton at the diketiminate carbon for which a weaker proton activity is sufficient. We propose two decoupled H2 evolution pathways based on these two intermediates, which operate at different overpotentials. Our results show how the various protonation sites of the redox-active Mabiq ligand affect the energies and activities of HER intermediates.

Singlet Oxygen Reactivity with Carbonate Solvents Used for Li-Ion Battery Electrolytes.

High degrees of delithiation of layered transition metal oxide cathode active materials (NCMs and HE-NCM) for lithium-ion batteries (LIBs) was shown to lead to the release of singlet oxygen, which is accompanied by enhanced electrolyte decomposition. Here, we study the reactivity of chemically produced singlet oxygen with the commonly used cyclic and linear carbonate solvents for LIB electrolytes. On-line gassing analysis of the decomposition of ethylene carbonate (EC) and dimethyl carbonate (DMC) reveals different stability toward the chemical attack of singlet oxygen, which is produced in situ by photoexcitation of the Rose Bengal dye. Ab initio calculations and on-the-fly simulations reveal a possible reaction mechanism, confirming the experimental findings. In the case of EC, hydrogen peroxide and vinylene carbonate (VC) are found to be the products of the first reaction step of EC with singlet oxygen in the reaction cascade of the EC chemical decomposition. In contrast to EC, simulations suggested DMC to be stable in the presence of singlet oxygen, which was also confirmed experimentally. Hydrogen peroxide is detrimental for cycling of a battery. For all known cathode active materials, the potential where singlet oxygen is released is found to be already high enough to electrochemically oxidize hydrogen peroxide. The formed protons and/or water both react with the typically used LiPF6 salt to HF that then leads to transition metal dissolution from the cathode active materials. This study shows how important the chemical stability toward singlet oxygen is for today's battery systems and that a trade-off will have to be found between chemical and electrochemical stability of the solvent to be used.

Applicability of Single-Layer Graphene as a Hydrogen-Blocking Interlayer in Low-Temperature PEMFCs.

Gas crossover is critical in proton exchange membrane (PEM)-based electrochemical systems. Recently, single-layer graphene (SLG) has gained great research interest due to its outstanding properties as a barrier layer for small molecules like hydrogen. However, the applicability of SLG as a gas-blocking interlayer in PEMs has yet to be fully understood. In this work, two different approaches for transferring SLG from a copper or a polymeric substrate onto PEMs are compared regarding their application in low-temperature PEM fuel cells. The SLG is sandwiched between two Nafion XL membranes to form a stable composite membrane. The successful transfer is confirmed by Raman spectroscopy and in ex situ hydrogen permeation experiments in the dry state, where a reduction of 50% upon SLG incorporation is achieved. The SLG composite membranes are characterized by their performance and hydrogen-blocking ability in a fuel cell setup at typical operating conditions of 80 °C and with fully humidified gases. The performance of the fuel cell incorporating an SLG composite membrane is equal to that of the reference cell when avoiding the direct etching process from a copper substrate, as remnants from copper etching deteriorate the performance of the fuel cell. For both transfer processes, the hydrogen crossover reduction of SLG composite membranes is only 15-19% (1.5 barabs) in the operating fuel cell. Further, hydrogen pumping experiments suggest that the barrier function of SLG impairs the water transport through the membrane, which may affect water management in electrochemical applications. In summary, this work shows the successful transfer of SLG into a PEM and confirms the effective hydrogen-blocking capability of the SLG interlayer. However, the hydrogen-blocking ability is significantly reduced when running the cell at the typical humidified operating conditions of PEM fuel cells, which follows from a combination of reversible interlayer alteration upon humidification and irreversible defect formation upon PEM fuel cell operation.

Photodeposition-Based Synthesis of TiO2@IrOx Core-Shell Catalyst for Proton Exchange Membrane Water Electrolysis with Low Iridium Loading.

The widespread application of green hydrogen production technologies requires cost reduction of crucial elements. To achieve this, a viable pathway to reduce the iridium loading in proton exchange membrane water electrolysis (PEMWE) is explored. Herein, a scalable synthesis method based on a photodeposition process for a TiO2@IrOx core-shell catalyst with a reduced iridium content as low as 40 wt.% is presented. Using this synthesis method, titania support particles homogeneously coated with a thin iridium oxide shell of only 2.1 ± 0.4 nm are obtained. The catalyst exhibits not only high ex situ activity, but also decent stability compared to commercially available catalysts. Furthermore, the unique core-shell structure provides a threefold increased electrical powder conductivity compared to structures without the shell. In addition, the low iridium content facilitates the fabrication of sufficiently thick catalyst layers at decreased iridium loadings mitigating the impact of crack formation in the catalyst layer during PEMWE operation. It is demonstrated that the novel TiO2@IrOx core-shell catalyst clearly outperforms the commercial reference in single-cell tests with an iridium loading below 0.3 mgIr cm-2 exhibiting a superior iridium-specific power density of 17.9 kW gIr -1 compared to 10.4 kW gIr -1 for the commercial reference.

Surface Oxygen Depletion of Layered Transition Metal Oxides in Li-Ion Batteries Studied by Operando Ambient Pressure X-ray Photoelectron Spectroscopy.

A new operando spectro-electrochemical setup was developed to study oxygen depletion from the surface of layered transition metal oxide particles at high degrees of delithiation. An NCM111 working electrode was paired with a chemically delithiated LiFePO4 counter electrode in a fuel cell-inspired membrane electrode assembly (MEA). A propylene carbonate-soaked Li-ion conducting ionomer served as an electrolyte, providing both good electrochemical performance and direct probing of the NCM111 particles during cycling by ambient pressure X-ray photoelectron spectroscopy. The irreversible emergence of an oxygen-depleted phase in the O 1s spectra of the layered oxide particles was observed upon the first delithiation to high state-of-charge, which is in excellent agreement with oxygen release analysis via mass spectrometry analysis of such MEAs. By comparing the metal oxide-based O 1s spectral features to the Ni 2p3/2 intensity, we can calculate the transition metal-to-oxygen ratio of the metal oxide close to the particle surface, which shows good agreement with the formation of a spinel-like stoichiometry as an oxygen-depleted phase. This new setup enables a deeper understanding of interfacial changes of layered oxide-based cathode active materials for Li-ion batteries upon cycling.

Novel side chain functionalized polystyrene/O-PBI blends with high alkaline stability for anion exchange membrane water electrolysis (AEMWE).

We report the synthesis of a polystyrene-based anion exchange polymer bearing the cationic charge at a C6-spacer. The polymer is prepared by a functionalized monomer strategy. First, a copper halide catalyzed C-C coupling reaction between a styryl Grignard and 1,6-dibromohexane is applied, followed by quaternization with N-methylpiperidine and free radical polymerization. The novel polymer is blended with the polybenzimidazole O-PBI to yield mechanically stable blend membranes representing a new class of anion exchange membranes. In this regard, the ratio of the novel anion exchange polymer to O-PBI is varied to study the influence on water uptake and ionic conductivity. Blend membranes with IECs between 1.58 meq. OH- g-1 and 2.20 meq. OH- g-1 are prepared. The latter shows excellent performance in AEMWE, reaching 2.0 A cm-2 below 1.8 V in 1 M KOH at 70 °C, with a minor degradation rate from the start. The blend membranes show no conductivity loss after immersion in 1 M KOH at 85 °C for six weeks indicating high alkaline stability.

Performance of Quaternized Polybenzimidazole-Cross-Linked Poly(vinylbenzyl chloride) Membranes in HT-PEMFCs.

High-temperature proton-exchange membrane fuel cells (HT-PEMFCs) are mostly based on acid-doped membranes composed of polybenzimidazole (PBI). A severe drawback of acid-doped membranes is the deterioration of mechanical properties upon increasing acid-doping levels. Cross-linking of different polymers is a way to mitigate stability issues. In this study, a new ion-pair-coordinated membrane (IPM) system with quaternary ammonium groups for the application in HT-PEMFCs is introduced. PBI cross-linked with poly(vinylbenzyl chloride) and quaternized with three amines (DABCO, quinuclidine, and quinuclidinol) are manufactured and compared to the state-of-the-art commercial Dapazol PBI membrane ex situ as well as by evaluating their HT-PEMFC performance. The IPMs show reduced swelling and better mechanical properties upon doping, which enables a reduction in membrane thickness while maintaining a comparably low gas crossover and mechanical stability. The HT-PEMFC based on the best-performing IPM reaches up to 530 mW cm-2 at 180 °C under H2/air conditions at ambient pressure, while Dapazol is limited to less than 430 mW cm-2 at equal parameters. This new IPM system requires less acid doping than conventional PBI membranes while outperforming conventional PBI membranes, which renders these new membranes promising candidates for application in HT-PEMFCs.