Photogenerated carrier dynamics of Mn2+ doped CsPbBr3 assembled with TiO2 systems: Effect of Mn doping content.

In recent years, all-inorganic perovskite materials have become an ideal choice for new thin film solar cells due to their excellent photophysical properties and have become a research hotspot. Studying the ultrafast dynamics of photo-generated carriers is of great significance for further improving the performance of such devices. In this work, we focus on the transient dynamic process of CsPbBr3/TiO2 composite systems with different Mn2+ doping contents using femtosecond transient absorption spectroscopy technology. We used singular value decomposition and global fitting to analyze the transient absorption spectra and obtained three components, which are classified as hot carrier cooling, charge transfer, and charge recombination processes, respectively. We found that the doping concentration of Mn2+ has an impact on all three processes. We think that the following two factors are responsible: one is the density of defect states and the other is the bandgap width of perovskite. As the concentration of doped Mn2+ increases, the charge transfer time constant shows a trend of initially increasing, followed by a subsequent decrease, reaching a turning point. This indicates that an appropriate amount of Mn2+ doping can effectively improve the photoelectric performance of solar cell systems. We proposed a possible charge transfer mechanism model and further elucidated the microscopic mechanism of the effect of Mn2+ doping on the interface charge transfer process of the CsPbBr3/TiO2 solar cell system.

Enhancement of visible light response of TiO2 photocatalyst by 3D-deposited Ag nanowires and its charge separation mechanism.

In 3D-deposited AgNW/TiO2, which is prepared by spray-applying titanium dioxide suspension to deposited silver nanowire sheets, the synergistic effects of increased crossing points of AgNWs to enhance localized surface plasmon resonance excitation and longer-lived electrons in the conduction band of TiO2 generated by plasmon-induced charge transfer have successfully resulted in photocatalytic activity in the visible light range. We have developed photocatalytic sheets in which TiO2 particles are uniformly attached to 3D-deposited AgNWs. Regarding the prepared sheet, it was confirmed that TiO2 was indeed well adhered to the AgNWs, and electron transfer was efficient at the interface. This sheet solves the problem that the response wavelength range of the photocatalytic reaction using TiO2 is only in the ultraviolet region and exhibits sufficient photocatalytic effect in the visible light region. Transient absorption spectroscopy measurements in the diffuse reflectance configuration confirmed that the electrons of AgNWs actually move into the conduction band of TiO2 under visible light and that the interaction is independent of the excitation light intensity, thereby extending the lifetime of the electrons.

Basic aspects of gold nanoparticle photo-functionalization using oxides and 2D materials: Control of light confinement, heat-generation, and charge separation in nanospace.

Although the optical properties of localized surface plasmon resonance and the relaxation processes of excited hot electrons in gold nanoparticles (AuNPs) have been well understood, the phenomena that occur when AuNPs relax on solid surfaces of semiconductors or insulators remain largely unknown. Thermal energy diffusion and electron transfer are relatively simple physical processes, but the phenomena they induce are interesting because of a variety of new application developments. In this Perspective, we introduce the fundamental aspects as well as advanced applications of several new physical phenomena induced by AuNPs-based hybrid materials with oxides or 2D materials. Localized heat can induce a great force on the surrounding medium to control mass transport, and plasmon-induced charge transfer reactions are expected to have applications in photocatalysis and solar cells. We also review increasing reports on the development of nano-optical sensors, transistors, and nano-light sources based on precisely controlled device structures utilizing AuNPs.

Photothermally Driven High-Speed Crystal Actuation and Its Simulation.

Mechanically responsive crystals have been increasingly explored, mainly based on photoisomerization. However, photoisomerization has some disadvantages for crystal actuation, such as a slow actuation speed, no actuation of thick crystals, and a narrow wavelength range. Here we report photothermally driven fast-bending actuation and simulation of a salicylideneaniline derivative crystal with an o-amino substituent in enol form. Under ultraviolet (UV) light irradiation, these thin (<20 µm) crystals bent but the thick (>40 µm) crystals did not due to photoisomerization; in contrast, thick crystals bent very quickly (in several milliseconds) due to the photothermal effect, even by visible light. Finally, 500 Hz high-frequency bending was achieved by pulsed UV laser irradiation. The generated photothermal energy was estimated based on the photodynamics using femtosecond transient absorption. Photothermal bending is caused by a nonsteady temperature gradient in the thickness direction due to the heat conduction of photothermal energy generated near the crystal surface. The temperature gradient was calculated based on the one-dimensional nonsteady heat conduction equation to simulate photothermally driven crystal bending successfully. Most crystals that absorb light have their own photothermal effects. It is expected that the creation and design of actuation of almost all crystals will be possible via the photothermal effect, which cannot be realized by photoisomerization, and the potential and versatility of crystals as actuation materials will expand in the near future.

Charge generation dynamics in hematite photoanodes decorated with gold nanostructures under near infrared excitation.

Photochemical water splitting offers a useful solution for efficient energy conversion into hydrogen gas. Hematite has been focused on this purpose as the photoanode due to the advantages of low-cost, chemical stability, and suitable bandgap. The photocatalytic ability, however, is limited by the short-lived carriers and lack of photoresponse in the near infrared (NIR) region. As a solution, combining hematite with a noble metal can enhance the photocatalytic performance toward longer wavelength. Gold nanoparticles indicate characteristic absorption in the visible and NIR regions and photo-induced injection of electrons into the semiconductor. In this study, a hybrid material of hematite photoanodes with gold nanostructures was fabricated and the carrier dynamics under NIR excitation was elucidated by femtosecond transient absorption spectroscopy. The observed strong positive absorption under NIR excitation of Au nanorods (NRs) on the hematite anode indicated an increased electron density in hematite due to electron transfer from AuNRs, demonstrating efficient charge carrier generation in hematite by the decorated gold nanostructure.

Remarkable Dependence of the Final Charge Separation Efficiency on the Donor-Acceptor Interaction in Photoinduced Electron Transfer.

The unprecedented dependence of final charge separation efficiency as a function of donor-acceptor interaction in covalently-linked molecules with a rectilinear rigid oligo-p-xylene bridge has been observed. Optimization of the donor-acceptor electronic coupling remarkably inhibits the undesirable rapid decay of the singlet charge-separated state to the ground state, yielding the final long-lived, triplet charge-separated state with circa 100% efficiency. This finding is extremely useful for the rational design of artificial photosynthesis and organic photovoltaic cells toward efficient solar energy conversion.

Modulation of Electron Injection Dynamics of Ru-Based Dye/TiO2 System in the Presence of Three Different Organic Solvents: Role of Solvent Dipole Moment and Donor Number.

In the present work, femtosecond transient absorption spectroscopy (fs-TAS) has been employed to investigate the electron injection efficiency (EIE) both from the singlet and triplet excited states of a well-known ruthenium dye (N719) to the conduction band (CB) of nanostructured TiO(2) in presence of three different organic solvents [γ-butylactone (GBL), 3-methoxypropionitrile (MPN), and dimethylformamide (DMF)] with different donor numbers (DNs) and dipole moments (DMs). The DM and DN of a solvent modulates the CB edge energy of TiO(2), and this effect reflects well in the fs-TAS results, which shows an EIE trend following the order GBL≥MPN≫DMF, that is, highest in GBL and lowest in DMF solvent environments. Fs-TAS results indicate a lower contribution of electron injection from both the singlet and triplet states in DMF, for which the dominant adsorption of DMF molecules on the TiO(2) surface seems to play an important role in the mechanism.

Trapped state sensitive kinetics in LaTiO2N solid photocatalyst with and without cocatalyst loading.

In addition to the process of photogeneration of electrons and holes in photocatalyst materials, the competitive process of trapping of these charge carriers by existing defects, which can both enhance the photocatalytic activity by promoting electron-hole separation or can deteriorate the activity by serving as recombination centers, is also very crucial to the overall performance of the photocatalyst. In this work, using femtosecond diffuse reflectance spectroscopy we have provided evidence for the existence of energetically distributed trapped states in visible-light responsive solid photocatalyst powder material LaTiO2N (LTON). We observe trapped state sensitive kinetics in bare-LTON. CoOx cocatalyst loading (2 wt % CoOx-LTON) shows effect on the kinetics only when presence of excess energy (for above bandgap excitation) results in the generation of surface carriers. Thus, the kinetics show appreciable excitation wavelength dependence, and the experimental results obtained for different λexc have been rationalized on this basis. In an earlier work by Domen and co-workers, the optimized CoOx/LTON has been reported to exhibit a high quantum efficiency of 27.1 ± 2.6% at 440 nm, the highest reported for this class of photocatalysts (J. Am. Chem. Soc. 2012, 134, 8348-8351). In the present work, the mechanism is addressed in terms of picosecond charge carrier dynamics.

Photoinduced interfacial electron transfer from perovskite quantum dots to molecular acceptors for solar cells.

Bandgap-engineered inorganic and hybrid halide perovskite (HP) films, nanocrystals, and quantum dots (PQDs) are promising for solar cells. Fluctuations of photoinduced electron transfer (PET) rates affect the interfacial charge separation efficiencies of such solar cells. Electron donor- or acceptor-doped perovskite samples help analyze PET and harvest photogenerated charge carriers efficiently. Therefore, PET in perovskite-based donor-acceptor (D-A) systems has received considerable attention. We analyzed the fluctuations of interfacial PET from MAPbBr3 or CsPbBr3 PQDs to classical electron acceptors such as 7,7,8,8-tetracyanoquinodimethane (TCNQ) and 1,2,4,5-tetracyanobenzene (TCNB) at single-particle and ensemble levels. The significantly negative Gibbs free energy changes of PET estimated from the donor-acceptor redox potentials, the donor-acceptor sizes, and the solvent dielectric properties help us clarify the PET in the above D-A systems. The dynamic nature of PET is apparent from the decrease in photoluminescence (PL) lifetimes and PL photocounts of PQDs with an increase in the acceptor concentrations. Also, the acceptor radical anion spectrum helps us characterize the charge-separated states. Furthermore, the PL blinking time and PET rate fluctuations (108 to 107 s-1) provide us with single-molecule level information about interfacial PET in perovskites.

Electric-field enhancement inducing near-infrared two-photon absorption in an indium-tin oxide nanoparticle film.

An enhancing factor: the enhancement of the electric properties of a dye molecule (IR26) by indium-tin oxide nanoparticles (ITO NPs, see picture) has been shown by measuring the near-infrared two-photon-excited transient absorption spectra. The dye molecule was excited much more efficiently in the presence of an ITO NP layer.

Unveiling charge dynamics of visible light absorbing oxysulfide for efficient overall water splitting.

Oxysulfide semiconductor, Y2Ti2O5S2, has recently discovered its exciting potential for visible-light-induced overall water splitting, and therefore, imperatively requires the probing of unknown fundamental charge loss pathways to engineer the photoactivity enhancement. Herein, transient diffuse reflectance spectroscopy measurements are coupled with theoretical calculations to unveil the nanosecond to microsecond time range dynamics of the photogenerated charge carriers. In early nanosecond range, the pump-fluence-dependent decay dynamics of the absorption signal is originated from the bimolecular recombination of mobile charge carriers, in contrast, the power-law decay kinetics in late microsecond range is dominated by hole detrapping from exponential tail trap states of valence band. A well-calibrated theoretical model estimates various efficiency limiting material parameters like recombination rate constant, n-type doping density and tail-states parameters. Compared to metal oxides, longer effective carrier lifetime ~6 ns is demonstrated. Different design routes are proposed to realize efficiency beyond 10% for commercial solar-to-hydrogen production from oxysulfide photocatalysts.

Two-photon excitable boron complex based on tridentate imidazo[1,5-a]pyridine ligand for heavy-atom-free mitochondria-targeted photodynamic therapy.

We have synthesized a cyan fluorescent boron complex based on a tridentate imidazo[1,5-a]pyridine ligand. The boron complex was found to have potential applications as not only a chiroptical material but also a heavy-atom-free mitochondria-targeted photosensitizer for cancer treatment.

Femtosecond diffuse reflectance transient absorption for dye-sensitized solar cells under operational conditions: effect of electrolyte on electron injection.

By applying diffuse reflectance transient absorption spectroscopy to dye-sensitized solar cells under operational conditions, we were able to directly correlate interfacial electron injection kinetics from a Ru complex sensitizer to a TiO(2) nanocrystalline electrode with the incident photon to current efficiency values. It was revealed that ionic liquid electrolytes reduced the initial electron injection efficiency by suppression of the approximately 100 ps process.

Zn-Zn porphyrin dimer-sensitized solar cells: toward 3-D light harvesting.

Zn-Zn porphyrin dimers have been incorporated into thin dye-sensitized solar cells (DSSCs) to boost their light harvesting efficiency. The photoexcited dimers show efficient and fast electron injection into TiO(2) indicating that both photoexcited chromophores contribute to current generation. The improved light harvesting ability coupled to enhanced DSSC performance demonstrates the potential of 3-D light harvesting arrays as next generation light harvesters for artificial solar energy conversion systems.

Origin of the overall water splitting activity of Ta3N5 revealed by ultrafast transient absorption spectroscopy.

Tantalum nitride (Ta3N5) is one of the few visible light absorbing photocatalysts capable of overall water splitting (OWS), by which the evolution of both H2 and O2 is possible. Despite favourable energetics, realizing the OWS or efficient H2 evolution in Ta3N5 prepared by the nitridation of tantalum oxide (Ta2O5) or Ta foil remains a challenge even after 15 years of intensive research. Recently our group demonstrated OWS in Ta3N5 when prepared by the short time nitridation of potassium tantalate (KTaO3). To obtain a mechanistic insight on the role of Ta precursor and nitridation time in realizing OWS, ultrafast dynamics of electrons (3435 nm probe) and holes (545 nm probe) is investigated using transient absorption spectroscopy. Electrons decay majorly by trapping in Ta3N5 prepared by the nitridation of Ta2O5, which do not show OWS. However, OWS activity in Ta3N5 prepared by 0.25 hour nitridation of KTaO3 is particularly favoured by the virtually absent electron and hole trapping. On further increasing the nitridation time of KTaO3 from 0.25 to 10 hour, trapping of both electron and hole is enhanced which concurrently results in a reduction of the OWS activity. Insights from correlating the synthesis conditions-structural defects-carrier dynamics-photocatalytic activity is of importance in designing novel photocatalysts to enhance solar fuel production.

Author Correction: Clear and transparent nanocrystals for infrared-responsive carrier transfer.

The original version of this Article omitted the fourth author Taizo Yoshinaga, who is from the 'Graduate School of Pure and Applied Sciences, University of Tsukuba, 1-1-1 Tennodai, Tsukuba, Japan'. Consequently, the third sentence of the Author Contributions, 'M.S. and M.K. synthesized the ITO NCs and ITO/semiconductor oxides' was revised to 'M.S., M.K. and T.Y. synthesized the ITO NCs and ITO/semiconductor oxides'. This has been corrected in both the PDF and HTML versions of the Article.

Clear and transparent nanocrystals for infrared-responsive carrier transfer.

Infrared-light-induced carrier transfer is a key technology for 'invisible' optical devices for information communication systems and energy devices. However, clear and colourless photo-induced carrier transfer has not yet been demonstrated in the field of photochemistry, to the best of our knowledge. Here, we resolve this problem by employing short-wavelength-infrared (1400-4000 nm) localized surface plasmon resonance-induced electron injection from indium tin oxide nanocrystals to transparent metal oxides. The time-resolved infrared measurements visualize the dynamics of the carrier in this invisible system. Selective excitation of localized surface plasmon resonances causes hot electron injection with high efficiency (33%) and long-lived charge separation (~ 2-200 µs). We anticipate our study not only provides a breakthrough for plasmonic carrier transfer systems but may also stimulate the invention of state-of-the-art invisible optical devices.

Ultrafast plasmon-induced electron transfer from gold nanodots into TiO2 nanoparticles.

By using femtosecond transient absorption spectroscopy with visible pump and IR probe to observe generation of injected electrons, we could directly observe plasmon-induced electron transfer from 10 nm gold nanodots to TiO2 nanocrystalline film. It was revealed that the reaction time was within 240 fs and the yield was about 40%.

Direct Aqueous Dispersion of Carbon Nanotubes Using Nanoparticle-Formed Fullerenes and Self-Assembled Formation of p/n Heterojunctions with Polythiophene.

Single-walled carbon nanotubes (SWCNTs) have received much attention because of their potential in optoelectronic applications. Pristine SWCNTs exhibit substantial van der Waals interactions and hydrophobic characteristics, so precipitation occurs immediately in most organic solvents and water. Highly toxic and hazardous chemicals are often used to obtain well-dispersed SWCNTs. Developing environmentally friendly processing methods for safe and practical applications is a great challenge. Here, we demonstrate direct exfoliation of SWCNTs in pure water only with n-type semiconducting fullerene nanoparticles. The resultant SWCNTs can be well-dispersed in water, where they remain essentially unchanged for several weeks. Adding an aqueous solution of p-type semiconducting water-soluble polythiophene yields self-assembled p/n heterojunctions between polythiophene and the nanoparticles. The aqueous-dispersed SWCNTs yield photocurrent responses in solution-processed thin films as a potential application of water-dispersed carbon nanomaterials.

Evidence and mechanism of efficient thermally activated delayed fluorescence promoted by delocalized excited states.

The design of organic compounds with nearly no gap between the first excited singlet (S1) and triplet (T1) states has been demonstrated to result in an efficient spin-flip transition from the T1 to S1 state, that is, reverse intersystem crossing (RISC), and facilitate light emission as thermally activated delayed fluorescence (TADF). However, many TADF molecules have shown that a relatively appreciable energy difference between the S1 and T1 states (~0.2 eV) could also result in a high RISC rate. We revealed from a comprehensive study of optical properties of TADF molecules that the formation of delocalized states is the key to efficient RISC and identified a chemical template for these materials. In addition, simple structural confinement further enhances RISC by suppressing structural relaxation in the triplet states. Our findings aid in designing advanced organic molecules with a high rate of RISC and, thus, achieving the maximum theoretical electroluminescence efficiency in organic light-emitting diodes.