RESUMO
In this work, we present a density functional theory benchmark on antioxidant-related properties for a series of six polyphenols that are well-known antioxidants: caffeic acid, cyanidin, ellagic acid, gallic acid, myricetin, and phloretin. Computations on the 24 O-H bond dissociation enthalpies (BDEs) and 6 ionization potentials (IPs) were performed using twenty-three exchange-correlation functionals combined with four different basis sets in the gas-phase, water, and methanol; calibration against the Domain-based Local Pair Natural Orbital CCSD(T) (DLPNO-CCSD(T)) approach was employed. Mean absolute deviation (MAD) as well as linear fitting results suggested the LC-PBE approach as the most suitable for O-H BDEs in the gas-phase. The LC-PBE, M06-2X, and M05-2X results presented the smallest MADs for O-H BDEs when compared to the reference, in water. The LC-PBE results had the smallest MADs for IPs in the gas-phase while M05-2X, M06-2X, LC-PBE, and LC-ωPBE exhibited the best results for MAD in water. We expect the outcomes from the present work will serve as general guidance for researchers working in the field.
RESUMO
In this work, properties related to antioxidant-potential mechanisms (such as the bond dissociation enthalpy, BDE, for the homolytic cleavage of the O-H bond and ionization energies, IEs) were determined for phenol, pyrocatechol, and gallic acid (GA). Both the protonated and deprotonated forms of GA were investigated. The Feller-Peterson-Dixon (FPD) composite method was employed with a variety of computational approaches, i.e., density functional theory, Möller-Plesset perturbation theory, and coupled-cluster-based methods, in combination with large correlation consistent basis sets with extrapolation to the complete basis set limit and consideration of core electron correlation effects. FPD results were compared to experimental and computational data available in the literature, presenting good agreement. For example, the FPD BDE (298 K) obtained for phenol, which was based on valence-correlated MP2/CBS calculations with contributions from correlating all electrons, was determined to be 87.56 kcal/mol, a value that is 0.42 kcal/mol lower than the result obtained in the most recent experiments, 87.98 ± 0.62. Calibration against coupled-cluster calculations was also carried out for phenol. We expect that the outcomes gathered here may help in establishing a general protocol for computational chemists that are interested in determining antioxidant-related properties for phenolic compounds with considerable accuracy as well as to motivate future IE measurements (particularly for GA) to be accomplished in the near future.
RESUMO
In this work, an investigation on the ionization potentials (IPs) of the glycine molecule (NH2CH2COOH) is presented. IPs ranging up to â¼20 eV were probed for each of the six conformations considered, with the referred threshold being chosen based on both: (i) the observations by recent photoelectron-photoion coincidence (PEPICO) experiments and (ii) the energy range of relevance to the modeling of other photo-induced processes (e.g., photoionization). For computing the IPs, the equation-of-motion ionization potential coupled-cluster with single and double excitations method (EOMIP-CCSD) was employed with large correlation consistent aug-cc-pVXZ and aug-cc-pCVXZ (X = D, T, and Q) basis sets. Extrapolation to the complete basis set limit and consideration of core electron correlation effects were also taken into account. Subsequently, the Feller-Peterson-Dixon (FPD) approach was used for considering all the contributions and to obtain accurate IPs. In addition, coupled-cluster with single and double excitations as well as perturbative triples, CCSD(T), was also used with the aug-cc-pVTZ basis set. When compared to each other, results obtained through the use of these approaches yielded excellent agreement. In general, the outcomes from the present work provide additional information to the insights gathered from the recent PEPICO experiments as well as accurate IPs for all 6 conformations of glycine using an approach based on high levels of theory. Hence, it is expected that other investigations focusing on photo-induced processes originating from NH2CH2COOH (for instance, the computational modeling of its photoionization) will be motivated for study in the future.
Assuntos
Elétrons , Glicina , Simulação por Computador , Conformação MolecularRESUMO
We present a benchmark investigation on the O-H bond dissociation enthalpies (BDEs) and ionization potential (IP) for gallic acid (GA), a widely known polyphenolic antioxidant. These properties were determined in the gas-phase and in water through the use of density functional theory (DFT), second-order Møller-Plesset perturbation theory (MP2), coupled-cluster with single and double excitations (CCSD), and coupled-cluster with single and double excitations as well as perturbative inclusion of triples (CCSD(T)). The 6-311++G(df,p), cc-pVDZ, aug-cc-pVDZ, cc-pVTZ, and aug-cc-pVTZ basis sets were used. Regarding DFT functionals, the M06-2X provided the best agreement for the BDEs when compared to the corresponding CCSD(T)/aug-cc-pVTZ results; M06-2X was also found to be the most suitable for probing the IP for the protonated forms of GA while LC-ωPBE was the most reliable in the case of deprotonated GA. Given that these properties represent important descriptors for examining mechanisms related to the antioxidant potential of a given polyphenol, we hope that the present work can serve as a guide for computational chemists venturing in the field.
RESUMO
In this work, a computational study on the ionization potentials (IPs) of the formaldehyde trimer, (H2CO)3, is presented. Twelve lowest-lying vertical IPs were determined through the use of the coupled-cluster level of theory using correlation consistent basis sets with extrapolation to the complete basis set limit and consideration of core electron correlation effects. Specifically, the equation-of-motion ionization potential coupled-cluster with single and double excitations method with the aug-cc-pVnZ and aug-cc-pCVnZ (n = D and T) basis sets was used. The Feller-Peterson-Dixon (FPD) composite approach was employed to provide accurate IPs, and eight conformations of (H2CO)3 were considered. The FPD IPs determined for (H2CO)3 were found to be systematically lower than those computed for the dimer and monomer of H2CO in the pattern IP(monomer) > IP(dimer) > IP(trimer) for a given IP. In addition, the IPs calculated when considering only the more stable conformation (C0) are in good agreement with those obtained using the eight conformations of the H2CO trimer, and thus, the actual conformation played only a minor role in determining such properties in the present case. By providing first accurate IP results for the H2CO trimer, we hope to motivate future experimental and computational investigations (e.g., studies involving photoionization) that rely on such quantities.
RESUMO
In this work, ground and excited-state properties were used as descriptors for probing mechanisms as well as to assess potential alternatives for tackling the elimination of perfluorobutane sulfonic acid (PFBS) - C4F9SO2OH, perfluorooctane sulfonic acid (PFOS) - C8F17SO2OH, and perfluorooctanoic acid (PFOA) - C7F15COOH. For this purpose, density functional theory (DFT) and its time-dependent formalism (TD-DFT) at both CAM-B3LYP/6-311+G(2d,2p) and M06-2X/6-311+G(2d,2p) levels of theory in water (IEF-PCM) were employed. To gauge the accuracy of the DFT approaches for the current systems, wave function methods (Møller-Plesset, MP2, coupled-cluster with single and double excitations, CCSD, CCSD with perturbative triples, CCSD(T), and equation of motion CCSD, EOM-CCSD) and aug-cc-pVXZ (X = D and T) basis sets were used. Regarding PFBS and PFOS, all the excited states probed were found to be energetically accessible only in the high-energy vacuum UV region (<200 nm ≥6.20 eV); SO2O- is released when the first low-lying excited singlet state (21A) of both compounds is accessed. On the other hand, two lowest-lying excited singlet states of PFOA were computed at considerably lower energy (5.84 eV and 5.97 eV for 21A and 31A, respectively, at the TD-DFT/CAM-B3LYP/6-311+G(2d,2p)). In addition, intramolecular OH radical formation is suggested for protonated PFOA when interacting with radiation at 7.98 eV ≈ 155 nm, as determined at the TD-DFT/CAM-B3LYP/6-311+G(2d,2p) level of theory. Such intramolecularly generated hydroxyl may contribute to a faster degradation of PFOA (or of other per- and poly-fluoroalkyl substances (PFAS) that are usually found together with PFOA).
RESUMO
In this work, we present a computational investigation on the ionization potentials (IPs) of the formaldehyde dimer, (H2CO)2. Twelve lowest lying IPs (corresponding to the entire valence orbitals) for both C2h and Cs symmetry conformers have been computed at the coupled cluster level of theory using large correlation consistent basis sets with extrapolation to the complete basis set limit and consideration of core electron correlation effects. Specifically, the equation-of-motion ionization potential coupled-cluster with single and double (EOMIP-CCSD) excitations method with the aug-cc-pVXZ and aug-cc-pCVXZ (X = T, Q, and 5) basis sets combined with the Feller-Peterson-Dixon approach was employed, as well as CCSD with perturbative triples [CCSD(T)] with the aug-cc-pVTZ basis sets. In general, excellent agreement was observed from the comparison between the results obtained through the use of these approaches. In addition, the IPs for the formaldehyde monomer were also obtained using such methodologies and the results compared with existing experimental data; excellent agreement was also observed in this case. To the best of our knowledge, this work represents the first of its kind to determine the IPs for all these systems using a high level theory approach and is presented to motivate experimental investigations, e.g., studies involving photoionization, particularly for the formaldehyde dimer. The equilibrium binding energy of the C2h dimer is calculated in this work at the CCSD(T)/aug-cc-pVTZ level of theory to be -4.71 kcal/mol. At this same level of theory, the equilibrium isomerization energy between C2h and Cs conformers is 0.76 kcal/mol (Cs conformer being more stable).
RESUMO
The synthesis of the first bismuth-containing macromolecules that exhibit phosphorescence in the solid state and in the presence of oxygen is reported. These red emissive high molecular weight polymers (>300â kDa) feature benzobismoles appended to a hydrocarbon scaffold, and were built via an efficient ring-opening metathesis (ROMP) protocol. Moreover, our general procedure readily allows for the formation of cross-linked networks and block copolymers. Attaining stable red phosphorescence with non-toxic elements remains a challenge and, thus, our new class of soluble (processable) polymeric phosphor is of great interest. Furthermore, the formation of bismuth-rich cores within organic-inorganic block copolymer spherical micelles is possible, leading to patterned arrays of bismuth in the film state.
RESUMO
In this article our attempts to tune the color of luminescence within a new class of aggregation-induced emission (AIE) active tellurophenes is reported along with computational details that include spin-orbit coupling effects so as to better understand the nature of emission in the phosphorescent tellurophene (B-Te-6-B). Despite not meeting some of the initial synthetic targets, the emission within a borylated tellurophene can be altered with the addition of an N-heterocyclic carbene.
RESUMO
We present a computational study on HIO2 molecules. Ground state properties such as equilibrium structures, relative energetics, vibrational frequencies, and infrared intensities were obtained for all the isomers at the coupled-cluster with single and double excitations as well as perturbative inclusion of triples (CCSD(T)) level of theory with the aug-cc-pVTZ-PP basis set and ECP-28-PP effective core potential for iodine and the aug-cc-pVTZ basis set for hydrogen and oxygen atoms. The HOIO structure is confirmed as the lowest energy isomer. The relative energies are shown to be HOIO < HOOI < HI(O)O. The HO(O)I isomer is only stable at the density functional theory (DFT) level of theory. The transition states determined show interconversion of the isomers is possible. In order to facilitate future experimental identification, vibrational frequencies are also determined for all corresponding deuterated species. Vertical excitation energies for the three lowest-lying singlet and triplet excited states were determined using the configuration interaction singles, time-dependent density functional theory (TD-DFT)/B3LYP, TD-DFT/G96PW91, and equation of motion-CCSD approaches with the LANL2DZ basis set plus effective core potential for iodine and the aug-cc-pVTZ basis set for hydrogen and oxygen atoms. It is shown that HOIO and HOOI isomers have excited states accessible at solar wavelengths (<4.0 eV) but these states have very small oscillator strengths (<2 × 10(-3)).
RESUMO
Multiresistant pathogens pose a serious threat to human health. The genus Candida is one class of human pathogenic yeasts responsible for infections affecting healthy and immunocompromised patients. In this context, plant essential oils emerged as a future natural alternative to control the diseases caused by these pathogens. Based on that, the present study aimed to evaluate the antimicrobial potential of essential oil from C. pluriglandulosus and understand the mechanism of action. Here, it highlighted antimicrobial activity and the mechanisms of action of the essential oil extracted from C. pluriglandulosus Carn.-Torres & Riina (CpEO) leaves on human pathogenic microorganisms in planktonic and biofilm lifestyles. In addition, for the first time, the oil composition was revealed by GC-MS analysis and the toxicity to human red blood cells (HRBC). Twenty-six chemical compounds were identified in CpEO, elemicin, bicyclogermacrene, caryophyllene, brevifolin, and 2,4,6-trimethoxy-styrene. Through hemolytic assay, it was shown that CpEO has no toxicity to human RBCs. At the concentration of 50 µg mL-1, CpEO did not show great antibacterial potential. However, promising data were found for C. krusei and C. parapsilosis inhibiting by 89.3% and 80.7% of planktonic cell growth and 83.5% and 77.9% the biofilm formation, respectively. Furthermore, the mechanisms of action CpEO were elucidated by fluorescence. Scanning electron microscopy revealed damage to the cell membrane and pore formation, ROS overproduction, and induction of apoptosis in candida cells. Our results reinforce the potential of CpEO as an effective alternative molecule of pharmaceutical interest.
RESUMO
The study aimed to identify an effective mechanism of adsorption of polyphenols on a nano-textured Ti surface and to evaluate the osteogenic differentiation on it. The source of polyphenols was a natural extract from red grape pomace. A chemical etching was used to form an oxide layer with a nanoscale texture on Ti; this layer is hydrophilic, but without hydroxyl groups with high acidic-basic chemical reactivity. The samples were characterized by electron and fluorescence microscopies, UV-Vis spectroscopy, contact angle measurements, zeta potential titration curves, and Folin-Ciocâlteu test. The presence of an adsorbed layer of polyphenols on the functionalized surface, maintaining redox ability, was confirmed by several tests. Consistent with the surface features, the adsorption was maximized by dissolving the extract in a high-amino acid medium, with respect to an inorganic solution, exploiting the high affinity of amino acids for polyphenols and for porous titanium surfaces. The osteogenic differentiation was assessed on an osteoblastic cell line by immunofluorescence, cell viability, expression of key osteoblast markers, and extracellular matrix mineralization. The surfaces functionalized with the extract diluted in the range 1 × 10-5-1 mg/mL resulted in having a greater osteogenic activity for the highest concentration, with lower values of cell viability; higher expression of alkaline phosphatase, bone sialoprotein, and collagen; and lower levels of osteopontin. In conclusion, the functionalization of a nano-textured Ti surface with polyphenols can potentially favor the osteogenic activity of osseointegrated implants.
RESUMO
In this work, we present a computational investigation on the structure and energetics of eleocarpanthraquinone, a newly isolated polyphenolic anthrone-antraquinone. Properties such as bond lengths, angles, atomic charges, bond dissociation enthalpies (BDEs), and ionization potential (IP) were determined through the use of density functional theory (DFT). The B3LYP and M06-2X exchange-correlation functionals were employed along with the 6-31+G(d,p), 6-31+ +G(d,p), and 6-311+G(d,p) basis sets for performing computations in the gas-phase, water, methanol, and ethanol. The conformation presenting all the hydroxyl groups undergoing hydrogen-bond interactions with neighboring oxygen atoms (conformation 5) was assigned as the most stable structure while its counterpart presenting no hydrogen-bond interaction was found to be 36.45 kcal/mol less stable than conformation 5 in the potential energy surface probed at the B3LYP/6-311+G(d,p) level of theory in the gas-phase, for instance. More importantly, the lowest O-H bond dissociation enthalpy was determined to be 93.80 kcal/mol at the B3LYP/6-311+G(d,p) level of theory in water against the 146.58 kcal/mol regarding the IP computed at the same approach, suggesting the hydrogen atom transfer mechanism as being preferred over the single electron transfer mechanism in regards to the antioxidant potential for the case of eleocarpanthraquinone; the same conclusion was drawn from the outcomes of all the other approaches used.
Assuntos
Antioxidantes/química , Antioxidantes/farmacologia , Benzoquinonas/química , Benzoquinonas/farmacologia , Modelos Moleculares , Teoria da Densidade Funcional , Conformação Molecular , Estrutura Molecular , Relação Estrutura-AtividadeRESUMO
In this work, we present a computational investigation on the photoexcitation of indigo carmine (IC). Physical insights regarding IC photoexcitation and photolysis were obtained from a fundamental perspective through quantum chemistry computations. Density functional theory (DFT) was used to investigate the ground state while its time-dependent formalism (TD-DFT) was used for probing excited state properties, such as vertical excitation energies, generalized oscillator strengths (GOS), and structures. All the computations were undertaken using two different approaches: M06-2X/6-311+G(d,p) and CAM-B3LYP/6-311+G(d,p), in water. Results determined using both methods are in systematic agreement. For instance, the first singlet excited state was found at 2.28 eV (with GOS = 0.4730) and 2.19 eV (GOS = 0.4695) at the TD-DFT/CAM-B3LYP/6-311+G(d,p) and TD-DFT/M06-2X/6-311+G(d,p) levels of theory, respectively. Excellent agreement was observed between the computed and the corresponding experimental UV-Vis spectra. Moreover, results suggest IC undergoes photodecomposition through excited state chemical reaction rather than via a direct photolysis path. To the best of our knowledge, this work is the first to tackle the photoexcitation, and its potential connections to photodegradation, of IC from a fundamental chemical perspective, being presented with expectations to motivate further studies.
RESUMO
The strategy of investigating the antioxidant potential of flavonols through the explicit modeling of chemical reactions (initiated to be employed in a previous work from our group) was taken further in this work. Therefore, a theoretical investigation on the reaction between fisetin and 2,2-diphenyl-1-picrylhydrazyl (DPPH) is presented. All the computations were performed using the density functional theory with the B3LYP functional along with the 6-31G(d,p) basis set. Structural, energetic quantities (ΔG and ΔG++), and reaction rates were probed in order to provide information on the antioxidant activity and to explore the contributions of each hydroxyl group to the referred property. According to the results obtained for the thermodynamic properties, fisetin presents antioxidant potential similar to quercetin (behavior that is also observed experimentally). In addition, the order of contribution of each OH group to the antioxidant potential was found to be 4'-ArOH (the most contributor, presenting ΔG = -5.17 kcal/mol) â 3'-ArOH (ΔG = -3.35 kcal/mol) â 3-ArOH (ΔG = -1.64 kcal/mol) â 7-ArOH (ΔG = 7.72 kcal/mol). These observations are in consistent agreement with the outcomes of other computational investigations performed using bond dissociation enthalpies (BDEs) as descriptors for the antioxidant activity. Therefore, the methodology employed in this work can be used as an alternative for probing antioxidant potential of compounds derived from fisetin. Graphical Abstract Illustrative scheme of the PES mapping in terms of hydrogen atom transfer from fisetin 3-ArOH to the nitrogen centered DPPH.
RESUMO
In this work, we present a computational study on the antioxidant potential of myricetin 3-O-α-L-rhamnopyranoside (Compound M3) and myricetin 4'-O-α-L-rhamnopyranoside (Compound M4'). Structural parameters, bond dissociation enthalpies (BDEs), ionization potentials (IPs), proton dissociation enthalpies (PDEs), proton affinities (PAs), and electron transfer enthalpies (ETEs), which are properties connected with different mechanisms related to antioxidant activity, were determined using density functional theory (DFT) with B3LYP, LC-ωPBE, M06-2X, and BMK functionals along with the 6-311G(d,p) and 6-311+G(d,p) basis sets in the gas phase, water, and pentylethanoate. The values obtained were compared with results previously available in the literature for myricetin (the parent molecule and a well-known antioxidant) and myricetin 3,4'-di-O-α-L-rhamnopyranoside (Compound M3,4'). As the BDEs are considerably lower than the IPs, the HAT mechanism is preferred over SET for the compounds M3 and M4'. The present study indicates Compound M3 as having its lowest bond dissociation enthalpy from the several different OH groups with similar value to the lowest for myricetin (74.72 kcal/mol versus 74.8 kcal/mol, respectively, at the B3LYP/6-311G(d,p) level of theory in the gas phase) and, thus, presenting antioxidant potential as good as its parent molecule. On the other hand, Compound M4' presented 78.97 kcal/mol as the lowest BDE at the B3LYP/6-311G(d,p) level of theory in the gas phase, that is very close to the 78.34 kcal/mol computed using the same approach for Compound M3,4'. Therefore, the present investigation indicated Compound M4' as being a slightly inferior antioxidant (with antioxidant potential comparable to Compound M3,4') than Compound M3. In addition, the inclusion of the sugar moiety studied here in the position 4'-ArOH of myricetin seems to have a more marked impact (downward) on the antioxidant activity than the glycosylation in the position 3-ArOH.
RESUMO
In this work, we present a computational investigation on the reactions between two well-known antioxidants (quercetin and morin) and 2,2-diphenyl-1-picrylhydrazyl (DPPH). A density functional theory (DFT) approach with the B3LYP functional and the 6-31G(d,p) basis set was used for the simulations. The structural and energetic parameters (Gibbs free-energy, ΔG, and Gibbs free-energy of activation, ΔG++) were determined to provide information on the antioxidant activity as well as to evaluate the contributions of each hydroxyl group to the referred property. According to the results obtained, quercetin presented three hydroxyls as being thermodynamically spontaneous in the reaction with DPPH (4[Formula: see text]-ArOH, 3[Formula: see text]-ArOH, and 3-ArOH, with ΔG = -4.93 kcal/mol, -2.89 kcal/mol, and -1.87 kcal/mol, respectively) against only two in the case of morin (2[Formula: see text]-ArOH and 3-ArOH, with ΔG = -7.56 kcal/mol and -4.57 kcal/mol, respectively). Hence, quercetin was found to be a more efficient antioxidant, which is in agreement with different experimental and computational investigations of bond dissociation enthalpies (BDEs). However, the order of contribution of the OH groups of each compound to the antioxidant potential present some differences when compared to what was seen in the previous investigations, especially for morin. These findings are in contrast to what was observed in studies based on the determinations of BDEs. Therefore, experimental investigations on the hydrogen-atom transfer mechanism (HAT) for both compounds are encouraged in order to clarify these observations.
RESUMO
Despite the great diversity of plant growth-promoting bacteria (PGPB) with potential to partially replace the use of N fertilisers in agriculture, few PGPB have been explored for the production of commercial inoculants, reinforcing the importance of identifying positive plant-bacteria interactions. Aiming to better understand the influence of PGPB inoculation in plant development, two PGPB species with distant phylogenetic relationship were inoculated in maize. Maize seeds were inoculated with Bacillus sp. or Azospirillum brasilense. After germination, the plants were subjected to two N treatments: full (N+) and limiting (N-) N supply. Then, anatomical, biometric and physiological analyses were performed. Both PGPB species modified the anatomical pattern of roots, as verified by the higher metaxylem vessel element (MVE) number. Bacillus sp. also increased the MVE area in maize roots. Under N+ conditions, both PGPB decreased leaf protein content and led to development of shorter roots; however, Bacillus sp. increased root and shoot dry weight, whereas A. brasilense increased photosynthesis rate and leaf nitrate content. In plants subjected to N limitation (N-), photosynthesis rate and photosystem II efficiency increased in maize inoculated with Bacillus sp., whilst A. brasilense contained higher ammonium, amino acids and total soluble sugars in leaves, compared to the control. Plant developmental and metabolical patterns were switched by the inoculation, regardless of the inoculant bacterium used, producing similar as well as distinct modifications to the parameters studied. These results indicate that even non-diazotrophic inoculant strains can improve the plant N status as result of the morpho-anatomical and physiological modifications produced by the PGPB.
Assuntos
Azospirillum brasilense/metabolismo , Bacillus/metabolismo , Nitrogênio/farmacologia , Raízes de Plantas/anatomia & histologia , Zea mays/microbiologia , Raízes de Plantas/efeitos dos fármacos , Raízes de Plantas/crescimento & desenvolvimento , Raízes de Plantas/metabolismo , Zea mays/crescimento & desenvolvimento , Zea mays/metabolismo , Zea mays/fisiologiaRESUMO
In this work, we present a computational study on the antioxidant potential of myricetin 3,4[Formula: see text]-di-O-α-L-rhamnopyranoside (Compound M). A density functional theory (DFT) approach with the B3LYP and LC-ωPBE functionals and with both the 6-311G(d,p) and 6-311+G(d,p) basis sets was used. The focus of the investigation was on the structural and energetic parameters including both bond dissociation enthalpies (BDEs) and ionization potentials (IPs), which provide information on the potential antioxidant activity. The properties computed were compared with BDEs and IPs available in the literature for myricetin, a compound well known for presenting antioxidant activity (and the parent molecule of the compound of interest in the present work). Myricetin 3,4[Formula: see text]-di-O-α-L-rhamnopyranoside presented the lowest BDE to be 79.13 kcal/mol (as determined using B3LYP/6-311G(d,p) in water) while myricetin has a quite similar value (within 3.4 kcal/mol). IPs computed in the gas phase [B3LYP/6-311G(d,p)] are 157.18 and 161.4 kcal/mol for myricetin 3,4[Formula: see text]-di-O-α-L-rhamnopyranoside and myricetin, respectively. As the values of BDEs are considerably lower than the ones probed for IPs (in the gas phase or in any given solvent environment), the hydrogen atom transfer mechanism is preferred over the single electron transfer mechanism. The BDEs obtained suggest that myricetin 3,4[Formula: see text]-di-O-α-L-rhamnopyranoside can present antioxidant potential as good as the parent molecule myricetin (a well-known antioxidant). Therefore, experimental tests on the antioxidant activity of Compound M are encouraged.
Assuntos
Antioxidantes/química , Simulação por Computador , Flavonoides/química , Glucosídeos/químicaRESUMO
The structures and energetics of two dihydrochalcones (phloretin and its glycoside phlorizin) were examined with density functional theory, using the B3LYP, M06-2X, and LC-ω PBE functionals with both the 6-311G(d,p) and 6-311 + G(d,p) basis sets. Properties connected to antioxidant activity, i.e., bond dissociation enthalpies (BDEs) for OH groups and ionization potentials (IPs), were computed in a variety of environments including the gas-phase, n-hexane, ethanol, methanol, and water. The smallest BDEs among the four OH groups for phloretin (three for phlorizin) were determined (using B3LYP/6-311 + G(d,p) in water) to be 79.36 kcal/mol for phloretin and 79.98 kcal/mol for phlorizin while the IPs (at the same level of theory) were obtained as 139.48 and 138.98 kcal/mol, respectively. By comparing with known antioxidants, these values for the BDEs indicate both phloretin and phlorizin show promise for antioxidant activity. In addition, the presence of the sugar moiety has a moderate (0-6 kcal/mol depending on functional) effect on the BDEs for all OH groups. Interestingly, the BDEs suggest that (depending on the functional chosen) the sugar moiety can lead to an increase, decrease, or no change in the antioxidant activity. Therefore, further experimental tests are encouraged to understand the substituent effect on the BDEs for phloretin and to help determine the most appropriate functional to probe BDEs for dihydrochalcones.