Detection of ABCB5 tumour antigen-specific CD8+ T cells in melanoma patients and implications for immunotherapy.

ATP binding cassette subfamily B member 5 (ABCB5) has been identified as a tumour-initiating cell marker and is expressed in various malignancies, including melanoma. Moreover, treatment with anti-ABCB5 monoclonal antibodies has been shown to inhibit tumour growth in xenotransplantation models. Therefore, ABCB5 represents a potential target for cancer immunotherapy. However, cellular immune responses against ABCB5 in humans have not been described so far. Here, we investigated whether ABCB5-reactive T cells are present in human melanoma patients and tested the applicability of ABCB5-derived peptides for experimental induction of human T cell responses. Peripheral blood mononuclear cells (PBMNC) isolated from blood samples of melanoma patients (n = 40) were stimulated with ABCB5 peptides, followed by intracellular cytokine staining (ICS) for interferon (IFN)-γ and tumour necrosis factor (TNF)-α. To evaluate immunogenicity of ABCB5 peptides in naive healthy donors, CD8 T cells were co-cultured with ABCB5 antigen-loaded autologous dendritic cells (DC). ABCB5 reactivity in expanded T cells was assessed similarly by ICS. ABCB5-reactive CD8+ T cells were detected ex vivo in 19 of 29 patients, melanoma antigen recognised by T cells (MART-1)-reactive CD8+ T cells in six of 21 patients. In this small, heterogeneous cohort, reactivity against ABCB5 was significantly higher than against MART-1. It occurred significantly more often and independently of clinical characteristics. Reactivity against ABCB5 could be induced in 14 of 16 healthy donors in vitro by repeated stimulation with peptide-loaded autologous DC. As ABCB5-reactive CD8 T cells can be found in the peripheral blood of melanoma patients and an ABCB5-specific response can be induced in vitro in naive donors, ABCB5 could be a new target for immunotherapies in melanoma.

Tooth brushing motion patterns with manual and powered toothbrushes-a randomised video observation study.

INTRODUCTION: Systematic reviews have shown that powered toothbrushes (PTs) are more effective than manual toothbrushes (MTs), but with only minor effect sizes. Whether PTs are used adequately, however, has not been investigated so far. The aim of the present study was therefore to analyse motion habits with PT in comparison to MT toothbrushes by video observation. MATERIALS AND METHODS: One hundred subjects were enrolled in this observational trial and brushed their teeth in randomised order with a MT and PT while being video-filmed, resulting in 95 analysable sets of recordings. Parameters of interest were brushing duration (s; median (min;max)), type of brushing strokes, area of brushing, changes between areas (n; median (min;max)) and brushing sequence. RESULTS: Brushing duration was 145 s (60;354) and 135 s (48;271) for PT and MT, respectively (p ≤ 0.001). Subjects brushed vestibular surfaces completely, but reached oral surfaces to a much lesser extent, regardless of the toothbrush type. With both toothbrushes, subjects moved frequently between areas (MT 35 (14;79); PT 33 (14;85); n.s.) and brushed predominantly with circling and horizontal strokes; with the PT, 50.5% of the subjects spent only <10% of the brushing duration with passive brushing (positioning the brush head on the teeth with ≤2 movements/s). CONCLUSIONS: Intra-individual motion patterns were similar with both MT and PT, and most subjects persisted in their habitual motion patterns regardless of the toothbrush type. CLINICAL RELEVANCE: The use of PT and MT may need intensive training and supervision from oral hygiene educators in order to help subjects taking full advantage from these devices.

In vitro Efficacy of Experimental Chitosan-Containing Solutions as Anti-Erosive Agents in Enamel.

The present study evaluated the effect of chitosans with different viscosities, dissolved in an AmF/SnCl2 solution, against erosion or erosion/abrasion. A total of 192 specimens were assigned to 2 × 6 groups (n = 16 specimens each): negative control, 4 chitosan solutions (groups Ch50, Ch500, Ch1000, and Ch2000, with viscosity of 50, 500, 1,000, or 2,000 mPas, respectively, 0.5% chitosan, 500 ppm F-, 800 ppm Sn2+, pH 4.4), and positive control (500 ppm F-, 800 ppm Sn2+, pH 4.3). One half of the groups was demineralized (experiment 1, E1; 10 days, 6 × 2 min/day, 0.5% citric acid, pH 2.8) and exposed to solutions (2 × 2 min/day); the other half was additionally brushed (15 s, 200 g) with non-fluoridated toothpaste before solution immersion (experiment 2, E2). Treatment effects were investigated by profilometry, energy-dispersive X-ray spectroscopy and scanning electron microscopy (SEM). In E1, all the chitosan-containing solutions reduced enamel loss by 77-80%, to the same extent as the positive control, except for Ch2000 (p ≤ 0.05), which completely inhibited tissue loss by the formation of precipitates. In E2, Ch50 and Ch500 showed best performance, with approximately 60% reduction of tissue loss compared to the negative control group (p ≤ 0.05 compared to other groups). SEM analysis showed differences between negative control and the other groups but only minor differences amongst the groups treated with active agents. In both E1 and E2, treatment with active agents resulted in surface enrichment of carbon and tin compared to negative control (p ≤ 0.001); brushing removed parts of carbon and tin (p ≤ 0.001). Chitosan shows different properties under erosive and erosive/abrasive conditions. Under erosive conditions high viscosity might be helpful, whereas lower viscosity seems to be more effective in cases of chemo-mechanical challenges.

Toothbrushing and flossing behaviour in young adults--a video observation.

OBJECTIVES: Video observation studies of habitual oral hygiene from the 1970s revealed a striking neglect of brushing oral surfaces and unsystematic brushing patterns with frequent movements between areas. These findings were not systematically followed up; furthermore, nothing is known about whether subjects are able to floss sufficiently. Therefore, the aim of this video study was to analyse the performance of habitual toothbrushing and flossing. METHODS: A random sample of 101 18-year-olds was included. Toothbrush and floss were provided; habitual brushing/flossing was videotaped in a standardised setting and analysed with the video coding software INTERACT. Parameters of interest were toothbrushing duration, type of brushing strokes, brushing patterns, flossed interproximal spaces and flossing technique. RESULTS: The mean brushing duration was 156.0 ± 71.1 s; duration differed only slightly between the upper and lower jaw as well as between the right, left and anterior areas. However, oral surfaces were brushed distinctly shorter than vestibular surfaces (27.1 ± 27.8 s versus 72.1 ± 31.8 s; p ≤ 0.001). Participants brushed different areas of the mouth with different types of strokes, predominantly with horizontal and circular strokes. Brushing movements frequently alternated between areas (45.1 ± 22.4) not randomly but accumulated within a jaw with a tendency to move from the right to the left. Half of the participants flossed, but only one performed sufficiently. CONCLUSIONS: There was a significant neglect of brushing oral surfaces and insufficient use of floss. Brushing patterns were similar to those observed in the 1970s. CLINICAL RELEVANCE: Understanding habitual oral hygiene behaviour is essential for improving oral hygiene instruction strategies.

Consensus report of the European Federation of Conservative Dentistry: erosive tooth wear--diagnosis and management.

OBJECTIVE: Due to an increased focus on erosive tooth wear (ETW), the European Federation of Conservative Dentistry (EFCD) considered ETW as a relevant topic for generating this consensus report. MATERIALS AND METHODS: This report is based on a compilation of the scientific literature, an expert conference, and the approval by the General Assembly of EFCD. RESULTS: ETW is a chemical-mechanical process resulting in a cumulative loss of hard dental tissue not caused by bacteria, and it is characterized by loss of the natural surface morphology and contour of the teeth. A suitable index for classification of ETW is the basic erosive wear examination (BEWE). Regarding the etiology, patient-related factors include the pre-disposition to erosion, reflux, vomiting, drinking and eating habits, as well as medications and dietary supplements. Nutritional factors relate to the composition of foods and beverages, e.g., with low pH and high buffer capacity (major risk factors), and calcium concentration (major protective factor). Occupational factors are exposition of workers to acidic liquids or vapors. Preventive management of ETW aims at reducing or stopping the progression of the lesions. Restorative management aims at reducing symptoms of pain and dentine hypersensitivity, or to restore esthetic and function, but it should only be used in conjunction with preventive strategies. CONCLUSIONS: Effective management of ETW includes screening for early signs of ETW and evaluating all etiological factors. CLINICAL RELEVANCE: ETW is a clinical condition, which calls for the increased attention of the dental community and is a challenge for the cooperation with other medical specialities.

Erosion/abrasion-preventing potential of NaF and F/Sn/chitosan toothpastes in dentine and impact of the organic matrix.

The study investigated the erosion/abrasion-preventing potential of experimental NaF (1,400 ppm F(-)) and amine fluoride (AmF)/NaF/SnCl2/chitosan (1,400 ppm F(-), 3,500 ppm Sn(2+), 0.5% chitosan) toothpastes relative to placebo and SnF2 gel (970 ppm F(-), 3,000 ppm Sn(2+)), and the impact of the demineralised dentine matrix on toothpaste effects. The study was a cyclic erosion/intervention experiment (10 days). Samples were stored in mineral salt solution either without or with collagenase (from Clostridium histolyticum type VII; 100 U/ml) for continuous removal of the organic matrix. To produce a comparable order of tissue loss, erosion was performed 6 × 30 s/day with 0.5% citric acid in the latter and 6 × 90 s/day with 1% citric acid in the former. Intervention was toothpaste slurry immersion (2 × 2 min/day); half of the samples were additionally brushed for 15 s within this time (brushing machine, load 200 g). Tissue loss was determined profilometrically (mean ± SD; µm). Tissue loss values (without/with brushing) for placebo, NaF, AmF/NaF/SnCl2/chitosan and SnF2 gel, respectively, were 11.6 ± 3.1/12.2 ± 2.5, 12.7 ± 3.1/10.7 ± 4.5, 8.7 ± 2.1/9.7 ± 2.1 and 8.8 ± 1.8/​10.9 ± 1.8 in the presence of the organic matrix and 10.7 ± 3.2/11.9 ± 2.1, 8.2 ± 4.0/10.1 ± 4.1, 8.7 ± 2.9/9.1 ± 1.8 and 8.4 ± 1.9/7.5 ± 1.5 in the absence of the organic matrix. Relative to placebo, the NaF formulation had no significant effects; the AmF/NaF/SnCl2/chitosan formulation significantly reduced tissue loss between 20 and 25% except when applied without brushing in the absence of the organic matrix. The effects of the formulations were similar both in the presence and absence of the organic matrix. Sn(2+)/F(-)-​containing formulations have the potential to reduce erosion/abrasion even in the absence of demineralised collagen; seeking for more effective formulations is desirable.

Effect of a chitosan additive to a Sn2+-containing toothpaste on its anti-erosive/anti-abrasive efficacy--a controlled randomised in situ trial.

OBJECTIVES: It is well known that Sn(2+) is a notable anti-erosive agent. There are indications that biopolymers such as chitosan can enhance the effect of Sn(2+), at least in vitro. However, little information exists about their anti-erosive/anti-abrasive in situ effects. In the present in situ study, the efficacy of Sn(2+)-containing toothpastes in the presence or absence of chitosan was tested. METHODS: Ten subjects participated in the randomised crossover study, wearing mandibular appliances with human enamel specimens. Specimens were extraorally demineralised (7 days, 0.5% citric acid, pH 2.6; 6 × 2 min/day) and intraorally exposed to toothpaste suspensions (2 × 2 min/day). Within the suspension immersion time, one half of the specimens were additionally brushed intraorally with a powered toothbrush (5 s, 2.5 N). Tested preparations were a placebo toothpaste (negative control), two experimental toothpastes (F/Sn = 1,400 ppm F(-), 3,500 ppm Sn(2+); F/Sn/chitosan = 1,400 ppm F(-), 3,500 ppm Sn(2+), 0.5 % chitosan) and an SnF2-containing gel (positive control, GelKam = 3,000 ppm Sn(2+), 1,000 ppm F(-)). Substance loss was quantified profilometrically (µm). RESULTS: In the placebo group, tissue loss was 11.2 ± 4.6 (immersion in suspension) and 17.7 ± 4.7 (immersion in suspension + brushing). Immersion in each Sn(2+)-containing suspension significantly reduced tissue loss (p ≤ 0.01); after immersion in suspension + brushing, only the treatments with GelKam (5.4 ± 5.5) and with F/Sn/chitosan (9.6 ± 5.6) significantly reduced loss [both p ≤ 0.05 compared to placebo; F/Sn 12.8 ± 6.4 (not significant)] CONCLUSION: Chitosan enhanced the efficacy of the Sn(2+)-containing toothpaste as an anti-erosive/anti-abrasive agent. CLINICAL RELEVANCE: The use of Sn(2+)- and chitosan-containing toothpaste is a good option for symptomatic therapy in patients with regular acid impacts.

Randomised in situ study on the efficacy of a tin/chitosan toothpaste on erosive-abrasive enamel loss.

Tin is a notable anti-erosive agent, and the biopolymer chitosan has also shown demineralisation-inhibiting properties. Therefore, the anti-erosive/anti-abrasive efficacy of the combination of both compounds was tested under in situ conditions. Twenty-seven volunteers were included in a randomised, double-blind, three-cell crossover in situ trial. Enamel specimens were recessed on the buccal aspects of mandibular appliances, extraorally demineralised (6 × 2 min/day) and intraorally treated with toothpaste slurries (2 × 2 min/day). Within the slurry treatment time, one-half of the specimens received additional intraoral brushing (5 s, 2.5 N). The tested toothpastes included a placebo toothpaste, an experimental NaF toothpaste (1,400 ppm F(-)) and an experimental F/Sn/chitosan toothpaste (1,400 ppm F(-), 3,500 ppm Sn(2+), 0.5% chitosan). The percentage reduction of tissue loss (slurry exposure/slurry exposure + brushing) compared to placebo was 19.0 ± 47.3/21.3 ± 22.4 after use of NaF and 52.5 ± 30.9/50.2 ± 34.3 after use of F/Sn/chitosan. F/Sn/chitosan was significantly more effective than NaF (p ≤ 0.001) and showed good efficacy against erosive and erosive-abrasive tissue loss. This study suggests that the F/Sn/chitosan toothpaste could provide good protection for patients who frequently consume acidic foodstuffs.

Efficacy of a moisture-tolerant material for fissure sealing: a prospective randomised clinical trial.

OBJECTIVES: Fissure sealings offer nearly complete protection against fissure caries, provided that they are adequately applied, for composite-based sealants with sufficient moisture control. This is not always attainable, particularly in children with low compliance. To counter this problem, a moisture-tolerant sealant has been developed. The present randomised clinical trial compared such a moisture-tolerant material (Embrace) with a conventional sealant (Helioseal). MATERIAL AND METHODS: In 55 participants (mean age, 10 ± 3 years), corresponding molar pairs were sealed with either Embrace or Helioseal. Retention, quality of sealing, and caries were clinically examined, both tactilely and visually, immediately and after 1 year. RESULTS: After 1 year, 93% of Helioseal sealings were complete, whereas 60% of Embrace sealings showed partial and 13% complete loss. The surface quality of Embrace was significantly worse than that of Helioseal. After the use of Embrace, the sealant margin was noticeable as a slight (distinct) step in 36% (15%). The visual (tactile) examination showed a rough surface in 78% (33%) in the case of Embrace. The Helioseal surfaces were shiny (smooth) in all cases (all differences between Helioseal and Embrace, p ≤ 0.001). Caries was found only after the use of Embrace (4%, n.s. compared to Helioseal). CONCLUSION: The moisture-tolerant material Embrace was distinctly inferior to Helioseal because Embrace showed weaknesses in retention and surface quality. CLINICAL RELEVANCE: Even if a moisture-tolerant sealant would be desirable in particular for children with low compliance, the tested material does not represent an alternative to the standard preparation.

Relationship between plaque score and video-monitored brushing performance after repeated instruction--a controlled, randomised clinical trial.

OBJECTIVES: Aim of this prospective, randomised, controlled clinical trial was to use the modified bass technique (MBT) and a specific brushing sequence to investigate whether two types of instruction methods lead to differences in plaque reduction and whether plaque reduction is related to technique adoption. METHODS: Ninety-eight participants were randomly assigned to three groups: (1) control, no instruction; (2) verbal instruction by means of a leaflet; and (3) verbal instruction supported by demonstration, no leaflet. Brushing performance was video monitored. Plaque score (Turesky modified QHI (T-QHI)) was measured at baseline, afterwards participants received instructions. After 2 weeks, T-QHI was measured for a second time, and participants were re-instructed. After another 2 weeks, T-QHI was measured for a third time. RESULTS: At baseline, T-QHI did not differ between groups ((1) 1.99 ± 0.51, (2) 1.90 ± 0.51, (3) 1.93 ± 0.56). The second measurement revealed an improvement of T-QHI in the instructed groups and in the non-instructed control group ((1) 1.80 ± 0.47, (2) 1.58 ± 0.58, (3) 1.64 ± 0.58; n.s. between groups); in the intervention groups, remotivation achieved no further improvement ((1) 1.72 ± 0.48, (2) 1.52 ± 0.58, (3) 1.50 ± 0.69; n.s. between groups and compared to second measurement). Improvement of T-QHI was not related to proper performance of technique or brushing sequence. Those who fully adopted the brushing technique, the sequence or both did not have lower plaque scores. CONCLUSION: Technical performance and effectiveness were not linked. CLINICAL RELEVANCE: Within the study setting, the MBT was not effective in reducing plaque scores. The general recommendation of the MBT should be re-evaluated in further studies.

Enzyme activities in the oral fluids of patients suffering from bulimia: a controlled clinical trial.

Patients with bulimia nervosa are at high risk for dental erosion. However, not all bulimic patients suffer from erosion, irrespective of the severity of their eating disorder. It is often speculated that differences in the saliva are important, however, little is known about salivary parameters in bulimic patients, particularly directly after vomiting. The aim of the clinical trial was to compare different salivary parameters of subjects suffering from bulimia with those of healthy controls. Twenty-eight subjects participated (14 patients with bulimia nervosa, 7 of them with erosion; 14 matched healthy controls). Resting and stimulated saliva of all participants was analysed as well as saliva collected from bulimic patients directly and 30 min after vomiting. Parameters under investigation were flow rate, pH, buffering capacity and the enzyme activities of proteases in general, collagenase, pepsin, trypsin, amylase, peroxidase, and lysozyme. Regarding flow rate, pH and buffering capacity only small differences were found between groups; buffering capacity directly after vomiting was significantly lower in bulimic subjects with erosion than in subjects without erosion. Differences in enzymatic activities were more pronounced. Activities of proteases, collagenase and pepsin in resting and proteases in stimulated saliva were significantly higher in bulimic participants with erosion than in controls. Peroxidase activity was significantly decreased by regular vomiting. Proteolytic enzymes seem to be relevant for the initiation and progression of dental erosion directly after vomiting, maybe by both hydrolysis of demineralized dentine structures as well as modulation of the pellicle layer.

Clinical study monitoring the pH on tooth surfaces in patients with and without erosion.

The aim of this study was to compare tooth surface pH after drinking orange juice or water in 39 patients with dental erosion and in 17 controls. The following investigations were carried out: measurement of pH values on selected tooth surfaces after ingestion of orange juice followed by ingestion of water (acid clearance), measurement of salivary flow rate and buffering capacity. Compared with the controls, patients with erosion showed significantly greater decreases in pH after drinking orange juice, and the pH stayed lower for a longer period of time (p < 0.05). Saliva parameters showed no significant differences between the two patient groups except for a lower buffering capacity at pH 5.5 in the erosion group.

Consecutive dosing of UVB irradiation induces loss of ABCB5 expression and activation of EMT and fibrosis proteins in limbal epithelial cells similar to pterygium epithelium.

Pterygium pathogenesis is often attributed to a population of altered limbal stem cells, which initiate corneal invasion and drive the hyperproliferation and fibrosis associated with the disease. These cells are thought to undergo epithelial to mesenchymal transition (EMT) and to contribute to subepithelial stromal fibrosis. In this study, the presence of the novel limbal stem cell marker ABCB5 in clusters of basal epithelial pterygium cells co-expressing with P63α and P40 is reported. ABCB5-positive pterygium cells also express EMT-associated fibrosis markers including vimentin and α-SMA while their ß-catenin expression is reduced. By using a novel in vitro model of two-dose UV-induced EMT activation on limbal epithelial cells, we could observe the dysregulation of EMT-related proteins including an increase of vimentin and α-SMA as well as downregulation of ß-catenin in epithelial cells correlating to downregulation of ABCB5. The sequential irradiation of limbal fibroblasts also induced an increase in vimentin and α-SMA. Taken together, these data demonstrate for the first time the expression of ABCB5 in pterygium stem cell activity and EMT-related events while the involvement of limbal stem cells in pterygium pathogenesis is exhibited via sequential irradiation of limbal epithelial cells. The later in vitro approach can be used to further study the involvement of limbal epithelium UV-induced EMT in pterygium pathogenesis and help identify novel treatments against pterygium growth and recurrence.

Dental erosion--an overview with emphasis on chemical and histopathological aspects.

The quality of dental care and modern achievements in dental science depend strongly on understanding the properties of teeth and the basic principles and mechanisms involved in their interaction with surrounding media. Erosion is a disorder to which such properties as structural features of tooth, physiological properties of saliva, and extrinsic and intrinsic acidic sources and habits contribute, and all must be carefully considered. The degree of saturation in the surrounding solution, which is determined by pH and calcium and phosphate concentrations, is the driving force for dissolution of dental hard tissue. In relation to caries, with the calcium and phosphate concentrations in plaque fluid, the 'critical pH' below which enamel dissolves is about 5.5. For erosion, the critical pH is lower in products (e.g. yoghurt) containing more calcium and phosphate than plaque fluid and higher when the concentrations are lower. Dental erosion starts by initial softening of the enamel surface followed by loss of volume with a softened layer persisting at the surface of the remaining tissue. Dentine erosion is not clearly understood, so further in vivo studies, including histopathological aspects, are needed. Clinical reports show that exposure to acids combined with an insufficient salivary flow rate results in enhanced dissolution. The effects of these and other interactions result in a permanent ion/substance exchange and reorganisation within the tooth material or at its interface, thus altering its strength and structure. The rate and severity of erosion are determined by the susceptibility of the dental tissues towards dissolution. Because enamel contains less soluble mineral than dentine, it tends to erode more slowly. The chemical mechanisms of erosion are also summarised in this review. Special attention is given to the microscopic and macroscopic histopathology of erosion.

Methods for the measurement and characterization of erosion in enamel and dentine.

The advantages, limitations and potential applications of available methods for studying erosion of enamel and dentine are reviewed. Special emphasis is placed on the influence of histological differences between the dental hard tissue and the stage of the erosive lesion. No method is suitable for all stages of the lesion. Factors determining the applicability of the methods are: surface condition of the specimen, type of the experimental model, nature of the lesion, need for longitudinal measurements and type of outcome. The most suitable and most widely used methods are: chemical analyses of mineral release and enamel surface hardness for early erosion, and surface profilometry and microradiography for advanced erosion. Morphological changes in eroded dental tissue have usually been characterised by scanning electron microscopy. Novel methods have also been used, but little is known of their potential and limitations. Therefore, there is a need for their further development, evaluation, consolidation and, in particular, validation.

Conventional and anti-erosion fluoride toothpastes: effect on enamel erosion and erosion-abrasion.

New toothpastes with anti-erosion claims are marketed, but little is known about their effectiveness. This study investigates these products in comparison with various conventional NaF toothpastes and tin-containing products with respect to their erosion protection/abrasion prevention properties. In experiment 1, samples were demineralised (10 days, 6 × 2 min/day; citric acid, pH 2.4), exposed to toothpaste slurries (2 × 2 min/day) and intermittently stored in a mineral salt solution. In experiment 2, samples were additionally brushed for 15 s during the slurry immersion time. Study products were 8 conventional NaF toothpastes (1,400-1,490 ppm F), 4 formulations with anti-erosion claims (2 F toothpastes: NaF + KNO(3) and NaF + hydroxyapatite; and 2 F-free toothpastes: zinc-carbonate-hydroxyapatite, and chitosan) and 2 Sn-containing products (toothpaste: 3,436 ppm Sn, 1,450 ppm F as SnF(2)/NaF; gel: 970 ppm F, 3,030 ppm Sn as SnF(2)). A mouth rinse (500 ppm F as AmF/NaF, 800 ppm Sn as SnCl(2)) was the positive control. Tissue loss was quantified profilometrically. In experiment 1, most NaF toothpastes and 1 F-free formulation reduced tissue loss significantly (between 19 and 42%); the Sn-containing formulations were the most effective (toothpaste and gel 55 and 78% reduction, respectively). In experiment 2, only 4 NaF toothpastes revealed significant effects compared to the F-free control (reduction between 29 and 37%); the F-free special preparations and the Sn toothpaste had no significant effect. The Sn gel (reduction 75%) revealed the best result. Conventional NaF toothpastes reduced the erosive tissue loss, but had limited efficacy regarding the prevention of brushing abrasion. The special formulations were not superior, or were even less effective.

Methodology and models in erosion research: discussion and conclusions.

This paper summarises the discussions which took place at the Workshop on Methodology in Erosion Research in Zürich, 2010, and aims, where possible, to offer guidance for the development and application of both in vitro and in situ models for erosion research. The prospects for clinical trials are also discussed. All models in erosion research require a number of choices regarding experimental conditions, study design and measurement techniques, and these general aspects are discussed first. Among in vitro models, simple (single- or multiple-exposure) models can be used for screening products regarding their erosive potential, while more elaborate pH cycling models can be used to simulate erosion in vivo. However, in vitro models provide limited information on intra-oral erosion. In situ models allow the effect of an erosive challenge to be evaluated under intra-oral conditions and are currently the method of choice for short-term testing of low-erosive products or preventive therapeutic products. In the future, clinical trials will allow longer-term testing. Possible methodologies for such trials are discussed.

Tooth wear and erosion: methodological issues in epidemiological and public health research and the future research agenda.

BACKGROUND: This paper addresses methodological issues in the field of tooth wear and erosion research including the epidemiological indices, and identifies future work that is needed to improve knowledge about tooth wear and erosion. METHODS: The paper is result of the work done at the meetings of the Special Interest Group "Tooth Surface Loss and Erosion" at the 2008, 2009 and 2010 conferences of the European Association for Dental Public Health, and the Workshop "Current Erosion indices- flawed or valid" which took place in Basel in 2007. RESULTS: Although there is consensus about the definition and the diagnostic criteria of various forms of tooth wear, gaps in research strategies have been identified. A basic problem is that fundamental concepts of wear and erosion as an oral health problem, have not yet been sufficiently defined. To a certain extent, tooth wear is a physiological condition, and there is no consensus as to whether it can be regarded as a disease. Furthermore, the multitude of indices and flaws in existing indices, make published data difficult to interpret. CONCLUSION: Topics for the research agenda are: the initiation of a consensus process towards an internationally accepted index, and the initiation of data collection on the prevalence of various forms of wear on a population-based level. There should be an emphasis on promoting communication between basic and clinical sciences, and the area of Public Health Dentistry. Furthermore, the question of whether tooth wear is a public health problem remains open for debate.

Global oral health inequalities: dental caries task group--research agenda.

The IADR Global Oral Health Inequalities Task Group on Dental Caries has synthesized current evidence and opinion to identify a five-year implementation and research agenda which should lead to improvements in global oral health, with particular reference to the implementation of current best evidence as well as integrated action to reduce caries and health inequalities between and within countries. The Group determined that research should: integrate health and oral health wherever possible, using common risk factors; be able to respond to and influence international developments in health, healthcare, and health payment systems as well as dental prevention and materials; and exploit the potential for novel funding partnerships with industry and foundations. More effective communication between and among the basic science, clinical science, and health promotion/public health research communities is needed. Translation of research into policy and practice should be a priority for all. Both community and individual interventions need tailoring to achieve a more equal and person-centered preventive focus and reduce any social gradient in health. Recommendations are made for both clinical and public health implementation of existing research and for caries-related research agendas in clinical science, health promotion/public health, and basic science.