Speeding-up the Determination of Protein-Ligand Affinities by STD NMR: The Reduced Data Set STD NMR Approach (rd-STD NMR).

STD NMR spectroscopy is a powerful ligand-observed NMR tool for screening and characterizing the interactions of small molecules and low molecular weight fragments with a given macromolecule, identifying the main intermolecular contacts in the bound state. It is also a powerful analytical technique for the accurate determination of protein-ligand dissociation constants (KD) of medium-to-weak affinity, of interest in the pharmaceutical industry. However, accurate KD determination and epitope mapping requires a long series of experiments at increasing saturation times to carry out a full analysis using the so-called STD NMR build-up curve approach and apply the "initial slopes approximation". Here, we have developed a new protocol to bypass this important limitation, which allows us to obtain initial slopes by using just two saturation times and, hence, to very quickly determine precise protein-ligand dissociation constants by STD NMR.

Differential Solvent DEEP-STD NMR and MD Simulations Enable the Determinants of the Molecular Recognition of Heparin Oligosaccharides by Antithrombin to Be Disentangled.

The interaction of heparin with antithrombin (AT) involves a specific sequence corresponding to the pentasaccharide GlcNAc/NS6S-GlcA-GlcNS3S6S-IdoA2S-GlcNS6S (AGA*IA). Recent studies have revealed that two AGA*IA-containing hexasaccharides, which differ in the sulfation degree of the iduronic acid unit, exhibit similar binding to AT, albeit with different affinities. However, the lack of experimental data concerning the molecular contacts between these ligands and the amino acids within the protein-binding site prevents a detailed description of the complexes. Differential epitope mapping (DEEP)-STD NMR, in combination with MD simulations, enables the experimental observation and comparison of two heparin pentasaccharides interacting with AT, revealing slightly different bound orientations and distinct affinities of both glycans for AT. We demonstrate the effectiveness of the differential solvent DEEP-STD NMR approach in determining the presence of polar residues in the recognition sites of glycosaminoglycan-binding proteins.

Fluorinated Man9 as a High Mannose Mimetic to Unravel Its Recognition by DC-SIGN Using NMR.

Lectins are capable of reading out the structural information contained in carbohydrates through specific recognition processes. Determining the binding epitope of the sugar is fundamental to understanding this recognition event. Nuclear magnetic resonance (NMR) is a powerful tool to obtain this structural information in solution; however, when the sugar involved is a complex oligosaccharide, such as high mannose, the signal overlap found in the NMR spectra precludes an accurate analysis of the interaction. The introduction of tags into these complex oligosaccharides could overcome these problems and facilitate NMR studies. Here, we show the preparation of the Man9 of high mannose with some fluorine tags and the study of the interaction with its receptor, dendritic cell-specific intercellular adhesion molecule-3-grabbing nonintegrin (DC-SIGN). This fluorinated ligand has allowed us to apply heteronuclear two-dimensional (2D) 1H,19F STD-TOCSYreF NMR experiments, using the initial slope approach, which has facilitated the analysis of the Man9/DC-SIGN interaction, unequivocally providing the binding epitope.

Imaging from the visible to the longwave infrared wavelengths via an inverse-designed flat lens.

It is generally assumed that correcting chromatic aberrations in imaging requires multiple optical elements. Here, we show that by allowing the phase in the image plane to be a free parameter, it is possible to correct chromatic variation of focal length over an extremely large bandwidth, from the visible (Vis) to the longwave infrared (LWIR) wavelengths using a single diffractive surface, i.e., a flat lens. Specifically, we designed, fabricated and characterized a flat, multi-level diffractive lens (MDL) with a thickness of ≤ 10µm, diameter of ∼1mm, and focal length of 18mm, which was constant over the operating bandwidth of λ=0.45µm (blue) to 15µm (LWIR). We experimentally characterized the point-spread functions, aberrations and imaging performance of cameras comprised of this MDL and appropriate image sensors for λ=0.45µm to 11µm. We further show using simulations that such extreme achromatic MDLs can be achieved even at high numerical apertures (NA=0.81). By drastically increasing the operating bandwidth and eliminating several refractive lenses, our approach enables thinner, lighter and simpler imaging systems.

Molecular Recognition of Natural and Non-Natural Substrates by Cellodextrin Phosphorylase from Ruminiclostridium Thermocellum Investigated by NMR Spectroscopy.

ß-1→4-Glucan polysaccharides like cellulose, derivatives and analogues, are attracting attention due to their unique physicochemical properties, as ideal candidates for many different applications in biotechnology. Access to these polysaccharides with a high level of purity at scale is still challenging, and eco-friendly alternatives by using enzymes in vitro are highly desirable. One prominent candidate enzyme is cellodextrin phosphorylase (CDP) from Ruminiclostridium thermocellum, which is able to yield cellulose oligomers from short cellodextrins and α-d-glucose 1-phosphate (Glc-1-P) as substrates. Remarkably, its broad specificity towards donors and acceptors allows the generation of highly diverse cellulose-based structures to produce novel materials. However, to fully exploit this CDP broad specificity, a detailed understanding of the molecular recognition of substrates by this enzyme in solution is needed. Herein, we provide a detailed investigation of the molecular recognition of ligands by CDP in solution by saturation transfer difference (STD) NMR spectroscopy, tr-NOESY and protein-ligand docking. Our results, discussed in the context of previous reaction kinetics data in the literature, allow a better understanding of the structural basis of the broad binding specificity of this biotechnologically relevant enzyme.

Dynamic Covalent Properties of a Novel Indolo[3,2-b]carbazole Diradical.

This work describes the synthesis and properties of a dicyanomethylene-substituted indolo[3,2-b]carbazole diradical ICz-CN. This quinoidal system dimerises almost completely to (ICz-CN)2 , which contains two long C(sp3 )-C(sp3 ) σ-bonds between the dicyanomethylene units. The minor open-shell ICz-CN component in the solid-state mixture was identified by EPR spectroscopy. Cyclic voltammetry and UV-visible spectroelectrochemical data, as well as comparison with reference monomer ICz-Br reveal that the nature of the one-electron oxidation of (ICz-CN)2 at ambient temperature and ICz-CN at elevated temperature is very similar in all these compounds due to the prevailing localization of their HOMO on the ICz backbone. The peculiar cathodic behaviour reflects the co-existence of (ICz-CN)2 and ICz-CN. The involvement of the dicyanomethylene groups stabilizes the close-lying LUMO and LUMO+1 of (ICz-CN)2 and especially ICz-CN compared to ICz-Br, resulting in a distinctive cathodic response at low overpotentials. Differently from neutral ICz-CN, its radical anion and dianion are remarkably stable under ambient conditions. The UV/Vis(-NIR) electronic transitions in parent (ICz-CN)2 and ICz-CN and their different redox forms have been assigned convincingly with the aid of TD-DFT calculations. The σ-bond in neutral (ICz-CN)2 is cleaved in solution and in the solid-state upon soft external stimuli (temperature, pressure), showing a strong chromism from light yellow to blue-green. Notably, in the solid state, the monomeric diradical species is predominantly formed under high hydrostatic pressure (>1 GPa).

Chemoenzymatic Synthesis of Fluorinated Cellodextrins Identifies a New Allomorph for Cellulose-Like Materials*.

Understanding the fine details of the self-assembly of building blocks into complex hierarchical structures represents a major challenge en route to the design and preparation of soft-matter materials with specific properties. Enzymatically synthesised cellodextrins are known to have limited water solubility beyond DP9, a point at which they self-assemble into particles resembling the antiparallel cellulose II crystalline packing. We have prepared and characterised a series of site-selectively fluorinated cellodextrins with different degrees of fluorination and substitution patterns by chemoenzymatic synthesis. Bearing in mind the potential disruption of the hydrogen-bond network of cellulose II, we have prepared and characterised a multiply 6-fluorinated cellodextrin. In addition, a series of single site-selectively fluorinated cellodextrins was synthesised to assess the structural impact upon the addition of one fluorine atom per chain. The structural characterisation of these materials at different length scales, combining advanced NMR spectroscopy and microscopy methods, showed that a 6-fluorinated donor substrate yielded multiply 6-fluorinated cellodextrin chains that assembled into particles presenting morphological and crystallinity features, and intermolecular interactions, that are unprecedented for cellulose-like materials.

Effect of Nafion content and hydration level on the electrochemical area of a Pt nanocatalyst in the triple-phase boundary.

Despite the great scientific effort, there are still some aspects of a polymeric membrane-based fuel cell (PEMFC) operation that are difficult to access experimentally. This is the case of the so-called triple-phase boundary (TPB), where the ionomer (commonly Nafion) interacts with the supported nanocatalyst (commonly Pt) and is key to the catalytic activity of the system. In this work, we use molecular dynamics simulations and electrochemical experiments on a Nafion/Pt/C system. We perform a systematic analysis, at an atomistic level, to evaluate the effect of several fundamental factors and their intercorrelation on the electrochemically active area (ECSA) of the catalysts. Our results reveal that at high Nafion contents, the catalyst utilization is affected due to the strong interaction between the sulfonic groups of the ionomer and the surface of the Pt nanoparticles (NPs). On the other hand, when the hydration level of the membrane decreases, the sulfonic groups have a greater occupation on the NP surface, covering the active area with hydrophobic Nafion chains and therefore increasing the inactive area. Voltammograms can corroborate our calculations. Overall, this investigation allows us to rationalize how the catalyst utilization is affected, which is an important step in establishing the relationship between the environment and the effectiveness and durability of the PEMFC system.

Antifungal biomaterial for reducing infections caused by Candida albicans in edentulous patients.

INTRODUCTION: Polymethylmethacrylate (PMMA) acrylic resins are used to make dentures for edentulous patients. OBJECTIVE: To find out the prevalence of Candida species in patients with and without removable prostheses from a dental clinic in León, Guanajuato, as well as to assess the antifungal effect and biological behavior of an experimental PMMA with silver nanoparticles for its possible application in prostheses. METHOD: To identify Candida species, smear samples were obtained from the palatal mucosa of 140 patients aged ≥ 60 years. The experimental PMMA with silver nnoparticles was placed in Candida albicans cultures, which were stained with the Live/Dead® kit for analysis under confocal microscopy; subsequently, it was implanted in Wistar rats in order to know its behavior in the surrounding tissues. RESULTS: Candida albicans was the most prevalent species in the evaluated patients, followed by Candida tropicalis and Candida krusei. The acrylic resin with silver nanoparticles significantly decreased the presence of Candida albicans. In the animal model, a discrete and controlled inflammatory reaction was found, which indicated biocompatibility of the acrylic resin that was used. CONCLUSIONS: It is possible for the nanostructured material with antifungal effect to be used in order to promote the reduction of oral Candida infections in edentulous patients.

INTRODUCCIÓN: Las resinas acrílicas de polimetilmetacrilato (PMMA) son utilizadas para elaborar dentaduras para pacientes edéntulos. OBJETIVO: Conocer la prevalencia de las especies de Candida en pacientes con y sin prótesis removibles de una clínica de odontología en León, Guanajuato; así como valorar el efecto antifúngico y el comportamiento biológico de un PMMA experimental con nanopartículas de plata para su posible aplicación en prótesis. MÉTODO: Para identificar las especies de Candida se obtuvieron muestras para frotis de la mucosa palatina de 140 pacientes con edad ≥ 60 años. El PMMA experimental con nanopartículas de plata fue colocado en cultivos de Candida albicans, los cuales fueron teñidos con el kit Live/Dead® para su análisis bajo microscopia confocal; posteriormente, se implantó en ratas Wistar para conocer su comportamiento en los tejidos circundantes. RESULTADOS: Candida albicans fue la especie más prevalente en los pacientes valorados, seguida de Candida tropicalis y Candida krusei. La resina acrílica con nanopartículas de plata disminuyó significativamente la presencia de Candida albicans. En el modelo animal se encontró reacción inflamatoria discreta y controlada, lo cual indicó la biocompatibilidad de la resina acrílica utilizada. CONCLUSIONES: Es posible utilizar el material nanoestructurado con efecto antifúngico para promover la reducción de infecciones orales por Candida en pacientes edéntulos.

Fulvic acid increases forage legume growth inducing preferential up-regulation of nodulation and signalling-related genes.

The use of potential biostimulants is of broad interest in plant science for improving yields. The application of a humic derivative called fulvic acid (FA) may improve forage crop production. FA is an uncharacterized mixture of chemicals and, although it has been reported to increase growth parameters in many species including legumes, its mode of action remains unclear. Previous studies of the action of FA have lacked appropriate controls, and few have included field trials. Here we report yield increases due to FA application in three European Medicago sativa cultivars, in studies which include the appropriate nutritional controls which hitherto have not been used. No significant growth stimulation was seen after FA treatment in grass species in this study at the treatment rate tested. Direct application to bacteria increased Rhizobium growth and, in M. sativa trials, root nodulation was stimulated. RNA transcriptional analysis of FA-treated plants revealed up-regulation of many important early nodulation signalling genes after only 3 d. Experiments in plate, glasshouse, and field environments showed yield increases, providing substantial evidence for the use of FA to benefit M. sativa forage production.

RARß acts as both an upstream regulator and downstream effector of miR-22, which epigenetically regulates NUR77 to induce apoptosis of colon cancer cells.

This study investigates the mechanism and consequences of microRNA-22 ( miR-22) induction. Our data revealed for the first time that retinoic acid (RA) and histone deacetylase (HDAC) inhibitors, including short-chain fatty acids and suberanilohydroxamic acid (SAHA), could individually or in combination induce miR-22. This induction was mediated via RA receptor ß (RARß) binding to a direct repeat 5 (DR5) motif. In addition, we uncovered HDAC1 as a novel miR-22 target. In an miR-22-dependent manner, HDAC inhibitors and RA reduced HDAC1, HDAC4, and sirtuin 1 (SIRT1), which were involved in chromatin remodeling of the RARß and nerve growth factor IB ( NUR77). Thus, HDAC inhibitors and RA-induced miR-22 resulted in simultaneous induction of cytoplasmic RARß and NUR77, leading to apoptosis of colon cancer cells. In mice, miR-22 and its inducers inhibited the growth of xenograft colon cancer. Moreover, tumor size reduction was accompanied by elevated miR-22, NUR77, and RARß and by reduced HDACs. In human colon polyps and adenocarcinomas, miR-22 and RARß were consistently reduced, which was associated with elevated HDAC1, HDAC4, and SIRT1 in colon adenocarcinomas. Results from this study revealed a novel anticancer mechanism of RARß via miR-22 induction to epigenetically regulate itself and NUR77, providing a promising cancer treatment modality using miR-22 and its inducers.-Hu, Y., French, S. W., Chau, T., Liu, H.-X., Sheng, L., Wei, F., Stondell, J., Garcia, J. C., Du, Y., Bowlus, C. L., Wan, Y.-J. Y. RARß acts as both an upstream regulator and downstream effector of miR-22, which epigenetically regulates NUR77 to induce apoptosis of colon cancer cells.

Hydrophobization of Cellulose Nanocrystals for Aqueous Colloidal Suspensions and Gels.

Surface hydrophobization of cellulose nanomaterials has been used in the development of nanofiller-reinforced polymer composites and formulations based on Pickering emulsions. Despite the well-known effect of hydrophobic domains on self-assembly or association of water-soluble polymer amphiphiles, very few studies have addressed the behavior of hydrophobized cellulose nanomaterials in aqueous media. In this study, we investigate the properties of hydrophobized cellulose nanocrystals (CNCs) and their self-assembly and amphiphilic properties in suspensions and gels. CNCs of different hydrophobicity were synthesized from sulfated CNCs by coupling primary alkylamines of different alkyl chain lengths (6, 8, and 12 carbon atoms). The synthetic route permitted the retention of surface charge, ensuring good colloidal stability of hydrophobized CNCs in aqueous suspensions. We compare surface properties (surface charge, ζ potential), hydrophobicity (water contact angle, microenvironment probing using pyrene fluorescence emission), and surface activity (tensiometry) of different hydrophobized CNCs and hydrophilic CNCs. Association of hydrophobized CNCs driven by hydrophobic effects is confirmed by X-ray scattering (SAXS) and autofluorescent spectroscopy experiments. As a result of CNC association, CNC suspensions/gels can be produced with a wide range of rheological properties depending on the hydrophobic/hydrophilic balance. In particular, sol-gel transitions for hydrophobized CNCs occur at lower concentrations than hydrophilic CNCs, and more robust gels are formed by hydrophobized CNCs. Our work illustrates that amphiphilic CNCs can complement associative polymers as modifiers of rheological properties of water-based systems.

Strain-driven surface reconstruction and cation segregation in layered Li(Ni1-x-yMnxCoy)O2 (NMC) cathode materials.

The composition, structure and phase transformations occurring on cathode surfaces greatly affect the performance of Li-ion batteries. Li-Ion diffusion and surface-electrolyte interaction are two major phenomena that impact the capacity and cell impedance. The effects of surface reconstruction (SR) of cathode materials on the performance of Li-ion batteries are of current interest. However, the origin and evolution of the SR are still not well understood. In this work, density functional theory (DFT) calculations are used to investigate the processes taking place during surface segregation and reconstruction. Facet dependent segregation was found in Li(Ni1-x-yMnxCoy)O2 (NMC) cathodes. Specifically, Co tends to segregate to the (104) surface of the primary particles within the transition metal layer, while Ni ions tend to segregate to the (012) surface in the Li layer, forming a SR. Experimental evidence shows the SR to be epitaxial with the bulk of the as-synthesized material, and the new SR phase is pinned to the NMC unit cell leading to a strained SR. Here, we show that strain can stabilize a spinel structure of the SR layers. Understanding the effects of surface strain opens a new avenue for the design of cathode materials with enhanced surface properties.

Biomechanical Evaluation of an All-Inside Posterior Medial Meniscal Root Repair Technique Via Suture Fixation to the Posterior Cruciate Ligament.

PURPOSE: To evaluate the tibiofemoral contact mechanics of an all-inside posterior medial meniscal root repair technique via suture fixation to the posterior cruciate ligament (PCL) and to compare with that of the intact knee and the knee with a root tear. METHODS: Tibiofemoral contact mechanics were recorded in 8 human cadaveric knee specimens using pressure sensors. Each knee underwent 3 testing conditions related to the posterior medial meniscal root: (1) intact knee; (2) root tear; and (3) all-inside repair via suture fixation to the PCL. Knees were loaded with a 1000-N axial compressive force at 4 knee flexion angles (0°, 30°, 60°, 90°). Calculations were performed for contact area, mean contact pressure, and peak contact pressure. A generalized linear model with a Tukey adjusted least square means test was used to determine differences between testing conditions. RESULTS: Across all knee flexion angles, there was an overall mean 26.3% reduction in contact area with root tear (211.34 mm2 vs intact 286.64 mm2, P = .0002), and a 31.6% increase from root tear to repair (277.61 mm2, P = .0297). Across all knee flexion angles, there was an overall mean 24.3% increase in contact pressure with root tear (1849.12 N/mm2 vs. intact 1487.52 N/mm2, P < .0001), and a 31.1% decrease from root tear to repair (1410.7 N/mm2, P = .0037). Across all knee flexion angles, there was an overall mean 10.6% increase in peak contact pressure with root tear (4083.55 N/mm2 vs. intact 3693.68 N/mm2, P < .0001), and a 12.4% decrease from root tear to repair (3632.13 N/mm2, P = .531). CONCLUSIONS: In most testing conditions and with overall averaging across knee flexion angles, the all-inside posterior medial meniscal root repair with suture fixation to the adjacent PCL fibers restored contact area (from 26.3% reduction with root tear to 31.6% increase with repair), contact pressures (from 24.3% increase with root tear to 31.1% decrease with repair), and peak contact pressures (from 10.6% increase with root tear to 12.4% decrease with repair) to that of the intact knee This may be a future potential technique to limit complications associated with the traditional transtibial pull-out method of repair. CLINICAL RELEVANCE: This technique may provide a posterior medial meniscal root repair construct that restores most tibiofemoral contact mechanics and offers theoretical benefits of technical ease and potential for an acceptable, less "anatomic" repair location.

Exchange Rules for Diradical π-Conjugated Hydrocarbons.

A variety of planar π-conjugated hydrocarbons such as heptauthrene, Clar's goblet and, recently synthesized, triangulene have two electrons occupying two degenerate molecular orbitals. The resulting spin of the interacting ground state is often correctly anticipated as S = 1, extending the application of Hund's rules to these systems, but this is not correct in some instances. Here we provide a set of rules to correctly predict the existence of zero mode states as well as the spin multiplicity of both the ground state and the low-lying excited states, together with their open- or closed-shell nature. This is accomplished using a combination of analytical arguments and configuration interaction calculations with a Hubbard model, both backed by quantum chemistry methods with a larger Gaussian basis set. Our results go beyond the well established Lieb's theorem and Ovchinnikov's rule, as we address the multiplicity and the open-/closed-shell nature of both ground and excited states.

High Molecular Weight Mixed-Linkage Glucan as a Mechanical and Hydration Modulator of Bacterial Cellulose: Characterization by Advanced NMR Spectroscopy.

Bacterial cellulose (BC) consists of a complex three-dimensional organization of ultrafine fibers which provide unique material properties such as softness, biocompatibility, and water-retention ability, of key importance for biomedical applications. However, there is a poor understanding of the molecular features modulating the macroscopic properties of BC gels. We have examined chemically pure BC hydrogels and composites with arabinoxylan (BC-AX), xyloglucan (BC-XG), and high molecular weight mixed-linkage glucan (BC-MLG). Atomic force microscopy showed that MLG greatly reduced the mechanical stiffness of BC gels, while XG and AX did not exert a significant effect. A combination of advanced solid-state NMR methods allowed us to characterize the structure of BC ribbons at ultra-high resolution and to monitor local mobility and water interactions. This has enabled us to unravel the effect of AX, XG, and MLG on the short-range order, mobility, and hydration of BC fibers. Results show that BC-XG hydrogels present BC fibrils of increased surface area, which allows BC-XG gels to hold higher amounts of bound water. We report for the first time that the presence of high molecular weight MLG reduces the density of clusters of BC fibrils and dramatically increases water interactions with BC. Our data supports two key molecular features determining the reduced stiffness of BC-MLG hydrogels, that is, (i) the adsorption of MLG on the surface of BC fibrils precluding the formation of a dense network and (ii) the preorganization of bound water by MLG. Hence, we have produced and fully characterized BC-MLG hydrogels with novel properties which could be potentially employed as renewable materials for applications requiring high water retention capacity (e.g. personal hygiene products).

Nanodisc-Targeted STD NMR Spectroscopy Reveals Atomic Details of Ligand Binding to Lipid Environments.

Saturation transfer difference (STD) NMR spectroscopy is one of the most popular ligand-based NMR techniques for the study of protein-ligand interactions. This is due to its robustness and the fact that it is focused on the signals of the ligand, without any need for NMR information on the macromolecular target. This technique is most commonly applied to systems involving different types of ligands (e.g., small organic molecules, carbohydrates or lipids) and a protein as the target, in which the latter is selectively saturated. However, only a few examples have been reported where membrane mimetics are the macromolecular binding partners. Here, we have employed STD NMR spectroscopy to investigate the interactions of the neurotransmitter dopamine with mimetics of lipid bilayers, such as nanodiscs, by saturation of the latter. In particular, the interactions between dopamine and model lipid nanodiscs formed either from charged or zwitterionic lipids have been resolved at the atomic level. The results, in agreement with previous isothermal titration calorimetry studies, show that dopamine preferentially binds to negatively charged model membranes, but also provide detailed atomic insights into the mode of interaction of dopamine with membrane mimetics. Our findings provide relevant structural information for the design of lipid-based drug carriers of dopamine and its structural analogues and are of general applicability to other systems.

Surfactant controlled zwitterionic cellulose nanofibril dispersions.

Zwitterionic cellulose nanofibrils (ZCNFs) with an isoelectric point of 3.4 were obtained by grafting glycidyltrimethylammonium chloride onto TEMPO/NaBr/NaOCl-oxidised cellulose nanofibrils. The ZCNF aqueous dispersions were characterized via transmission electron microscopy, rheology and small angle neutron scattering, revealing a fibril-bundle structure with pronounced aggregation at pH 7. Surfactants were successfully employed to tune the stability of the ZCNF dispersions. Upon addition of the anionic surfactant, sodium dodecyl sulfate, the ZCNF dispersion shows individualized fibrils due to electrostatic stabilization. In contrast, upon addition of the cationic species dodecyltrimethylammonium bromide, the dispersion undergoes charge neutralization, leading to more pronounced flocculation.

Stabilizing and Modulating Color by Copigmentation: Insights from Theory and Experiment.

Natural anthocyanin pigments/dyes and phenolic copigments/co-dyes form noncovalent complexes, which stabilize and modulate (in particular blue, violet, and red) colors in flowers, berries, and food products derived from them (including wines, jams, purees, and syrups). This noncovalent association and their electronic and optical implications constitute the copigmentation phenomenon. Over the past decade, experimental and theoretical studies have enabled a molecular understanding of copigmentation. This review revisits this phenomenon to provide a comprehensive description of the nature of binding (the dispersion and electrostatic components of π-π stacking, the hydrophobic effect, and possible hydrogen-bonding between pigment and copigment) and of spectral modifications occurring in copigmentation complexes, in which charge transfer plays an important role. Particular attention is paid to applications of copigmentation in food chemistry.

Experimental Demonstration of >230° Phase Modulation in Gate-Tunable Graphene-Gold Reconfigurable Mid-Infrared Metasurfaces.

Metasurfaces offer significant potential to control far-field light propagation through the engineering of the amplitude, polarization, and phase at an interface. We report here the phase modulation of an electronically reconfigurable metasurface and demonstrate its utility for mid-infrared beam steering. Using a gate-tunable graphene-gold resonator geometry, we demonstrate highly tunable reflected phase at multiple wavelengths and show up to 237° phase modulation range at an operating wavelength of 8.50 µm. We observe a smooth monotonic modulation of phase with applied voltage from 0° to 206° at a wavelength of 8.70 µm. Based on these experimental data, we demonstrate with antenna array calculations an average beam steering efficiency of 23% for reflected light for angles up to 30° for this range of phases, confirming the suitability of this geometry for reconfigurable mid-infrared beam steering devices. By incorporating all nonidealities of the device into the antenna array calculations including absorption losses which could be mitigated, 1% absolute efficiency is achievable up to 30°.