Ultralight-Weight Graphene Aerogels with Extremely High Electrical Conductivity.

The integration of 2D graphene sheets into a porous and macroscopic structure is extremely attractive for application in several electrochemical fields. In this regard, for the first time, the synthesis of 3D graphene aerogels is reported by using a rapid, easy, cost-effective, and scalable at industrial level methodology. These aerogels integrate the intrinsic properties of graphene with a high pore volume. To achieve this ultraporous graphene network, resorcinol/formaldehyde polymer with controllable porosity is employed as a binder and a cross-linker material, and a graphene oxide solution provides the graphene building blocks. Two series of materials with and without catalyst for resorcinol/formaldehyde reaction and with different synthesis conditions and graphene contents are studied. The resulting graphene aerogels present low density, large macroporosity, and electrical conductivity values as high as 852 S m-1 , with 97.58% of porosity, which is the highest value of electrical conductivity reported so far in the literature for ultralight-weight graphene aerogels.

Development of Ferromagnetic Materials Containing Co2P, Fe2P Phases from Organometallic Dendrimers Precursors.

The development of synthesis methods to access advanced materials, such as magnetic materials that combine multimetallic phosphide phases, remains a worthy research challenge. The most widely used strategies for the synthesis of magnetic transition metal phosphides (TMPs) are organometallic approaches. In this study, Fe-containing homometallic dendrimers and Fe/Co-containing heterometallic dendrimers were used to synthesize magnetic materials containing multimetallic phosphide phases. The crystalline nature of the nearly aggregated particles was indicated for both designed magnetic samples. In contrast to heterometallic samples, homometallic samples showed dendritic effects on their magnetic properties. Specifically, saturation magnetization (Ms) and coercivity (Hc) decrease as dendritic generation increases. Incorporating cobalt into the homometallic dendrimers to prepare the heterometallic dendrimers markedly increases the magnetic properties of the magnetic materials from 60 to 75 emu/g. Ferromagnetism in homometallic and heterometallic particles shows different responses to temperature changes. For example, heterometallic samples were less sensitive to temperature changes due to the presence of Co2P in contrast to the homometallic ones, which show an abrupt change in their slopes at a temperature close to 209 K, which appears to be related to the Fe2P ratios. This study presents dendrimers as a new type of precursor for the assembly of magnetic materials containing a mixture of iron- and cobalt-phosphides phases with tunable magnetism, and provides an opportunity to understand magnetism in such materials.

Structural Insights of Three 2,4-Disubstituted Dihydropyrimidine-5-carbonitriles as Potential Dihydrofolate Reductase Inhibitors.

In this report, we describe the structural characterization of three 2,4-disubstituted-dihydropyrimidine-5-carbonitrile derivatives, namely 2-{[(4-nitrophenyl)methyl]sulfanyl}-6-oxo-4-propyl-1,6-dihydropyrimidine-5-carbonitrile 1, 4-(2-methylpropyl)-2-{[(4-nitrophenyl)methyl]sulfanyl}-6-oxo-1,6-dihydropyrimidine-5-carbonitrile 2, and 2-[(2-ethoxyethyl)sulfanyl]-6-oxo-4-phenyl-1,6-dihydropyrimidine-5-carbonitrile monohydrate 3. An X-ray diffraction analysis revealed that these compounds were crystallized in the centrosymmetric space groups and adopt an L-shaped conformation. One of the compounds (3) crystallized with a water molecule. A cyclic motif (R22(8)) mediated by N-H···O hydrogen bond was formed in compounds 1 and 2, whereas the corresponding motif was not favorable, due to the water molecule, in compound 3. The crystal packing of these compounds was analyzed based on energy frameworks performed at the B3LYP/6-31G(d,p) level of theory. Various inter-contacts were characterized using the Hirshfeld surface and its associated 2D-fingerprint plots. Furthermore, a molecular docking simulation was carried out to assess the inhibitory potential of the title compounds against the human dihydrofolate reductase (DHFR) enzyme.

Structural Insights and Docking Analysis of Adamantane-Linked 1,2,4-Triazole Derivatives as Potential 11ß-HSD1 Inhibitors.

The solid-state structural analysis and docking studies of three adamantane-linked 1,2,4-triazole derivatives are presented. Crystal structure analyses revealed that compound 2 crystallizes in the triclinic P-1 space group, while compounds 1 and 3 crystallize in the same monoclinic P21/c space group. Since the only difference between them is the para substitution on the aryl group, the electronic nature of these NO2 and halogen groups seems to have no influence over the formation of the solid. However, a probable correlation with the size of the groups is not discarded due to the similar intermolecular disposition between the NO2/Cl substituted molecules. Despite the similarities, CE-B3LYP energy model calculations show that pairwise interaction energies vary between them, and therefore the total packing energy is affected. HOMO-LUMO calculated energies show that the NO2 group influences the reactivity properties characterizing the molecule as soft and with the best disposition to accept electrons. Further, in silico studies predicted that the compounds might be able to inhibit the 11ß-HSD1 enzyme, which is implicated in obesity and diabetes. Self- and cross-docking experiments revealed that a number of non-native 11ß-HSD1 inhibitors were able to accurately dock within the 11ß-HSD1 X-ray structure 4C7J. The molecular docking of the adamantane-linked 1,2,4-triazoles have similar predicted binding affinity scores compared to the 4C7J native ligand 4YQ. However, they were unable to form interactions with key active site residues. Based on these docking results, a series of potentially improved compounds were designed using computer aided drug design tools. The docking results of the new compounds showed similar predicted 11ß-HSD1 binding affinity scores as well as interactions to a known potent 11ß-HSD1 inhibitor.

Spiro[1,2]oxaphosphetanes of Nonstabilized and Semistabilized Phosphorus Ylide Derivatives: Synthesis and Kinetic and Computational Study of Their Thermolysis.

A series of tri- and tetrasubstituted spiro-oxaphosphetanes stabilized by ortho-benzamide (oBA) and N-methyl ortho-benzamide (MoBA) ligands have been synthesized by the reaction of Cα,Cortho-dilithiated phosphazenes with aldehydes and ketones. They include enantiopure products and the first example of an isolated oxaphosphetane having a phenyl substituent at C3 of the ring. Kinetic studies of their thermal decomposition showed that the process takes place irreversibly through a polar transition state (ρ = -0.22) under the influence of electronic, [1,2], [1,3] steric, and solvent effects, with C3/P-[1,2] interactions as the largest contribution to ΔG⧧ of olefination. Inversion of the phosphorus configuration through stereomutation has been observed in a number of cases. DFT calculations showed that oBA derivatives olefinated through the isolated (N, O)(Ph, C6H4, C) oxaphosphetanes (Channel A), whereas MoBA compounds decomposed faster via the isomer (C6H4, O)(C, N, Ph) formed by P-stereomutation involving a MB2 permutational mechanism (Channel B). The energy barrier of P-isomerization is lower than that of olefination. Fragmentation takes place in a concerted asynchronous reaction. The thermal stability of oxaphosphetanes is determined by strong C3/P-[1,2] interactions destabilizing the transition state of olefination. The effect of charge distribution and C3/C4-[1,2] and C4/P-[1,3] steric and solvent interactions on ΔG⧧ was also evaluated.

Advanced core-shell EDTA-functionalized magnetite nanoparticles for rapid and efficient magnetic solid phase extraction of heavy metals from water samples prior to the multi-element determination by ICP-OES.

A method for preconcentration and simultaneous determination of trace heavy metals in water media by core-shell superparamagnetic nanoparticles with the immobilized derivative of ethylenediaminetriacetic acid (referred to as MNPs/SiO2-EDTA) is proposed. The specific layer-by-layer covering of magnetite endowed the new material with essentially increased chemical stability of MNPs including acidic media and improved the affinity toward traces of toxic metal ions. The initial and modified materials were characterized by X-ray powder diffraction, Fourier transform infrared spectroscopy, transmission and scanning electron microscopies, elemental analysis, and vibrating sample magnetometry. The obtained particles were nanodimensional with a 7-12-nm magnetic core and a 4-6-nm silica shell. The MNPs/SiO2-EDTA quantitatively removes heavy metals from contaminated media at pH ≥ 3.5 within 15 min. The adsorption data were successfully fitted to the pseudo-second-order kinetic model. The preconcentration factor was 150 and maximum adsorption capacity was 36.9 mg g-1 for Cu(II), 108.8 mg g-1 for Pb(II), 30.9 mg g-1 for Zn(II), 34.32 mg g-1 for Cr(III), and 59.5 mg g-1 for Cd(II). Due to high stability in the wide range of pH, the magnetic adsorbent can be regenerated at least six times using 0.1 M HNO3. Following adsorption/desorption, determination of metal ions is provided by inductively coupled plasma optical emission spectrometry (ICP-OES) . The linear range of the proposed method is 0.1 - 200 µg L-1. The limits of detection (LOD) are 0.12 µg L-1 for Zn(II); 0.06 µg L-1 for Cd(II); 0.39 for Cu(II); 0.15 µg L-1 for Cr(III); and 0.76 µg L-1 for Pb(II). The method performance was evaluated in the analysis of environmental, tap, and wastewater samples with recoveries in the range of 94.0-104.0%.

Design and development of a controlled pressure/temperature set-up for in situ studies of solid-gas processes and reactions in a synchrotron X-ray powder diffraction station.

A novel set-up has been designed and used for synchrotron radiation X-ray high-resolution powder diffraction (SR-HRPD) in transmission geometry (spinning capillary) for in situ solid-gas reactions and processes in an isobaric and isothermal environment. The pressure and temperature of the sample are controlled from 10(-3) to 1000 mbar and from 80 to 1000 K, respectively. To test the capacities of this novel experimental set-up, structure deformation in the porous material zeolitic imidazole framework (ZIF-8) by gas adsorption at cryogenic temperature has been studied under isothermal and isobaric conditions. Direct structure deformations by the adsorption of Ar and N2 gases have been observed in situ, demonstrating that this set-up is perfectly suitable for direct structural analysis under in operando conditions. The presented results prove the feasibility of this novel experimental station for the characterization in real time of solid-gas reactions and other solid-gas processes by SR-HRPD.

Effect of the temperature on structural and optical properties of zinc oxide nanoparticles.

Zinc nitrate hexahydrate, Zn(NO3)2 x 6H2O was used as a precursor with urea NH2CONH2 to prepare hydrozincite Zn5(CO3)2(OH)6 powder using hydrothermal method for 8 h at 90 degrees C. Zinc oxide (ZnO) nanoparticles (NPs) were prepared by thermal annealing of hydrozincite powder at different annealing temperatures, i.e., 350, 550 750 and 950 degrees C in air for 2 h. The resulting materials were characterized by X-ray diffraction, scanning electron microscopy (SEM) and thermal gravimetric analysis (TGA). The optical properties of the products were characterized by Fourier transform infrared spectroscopy (FT-IR), UV-Vis spectroscopy and photoluminescence (PL) spectra. It was found that the particle size increased from - 33 to 250 nm with increasing in the annealing temperatures. FTIR results showed that the standard peaks of zinc oxide were presented at 428.17 and 532.32 cm(-1). Thermal analysis study showed that the primary weight loss starts at - 93 degrees C is due to solvent evaporation. The secondary weight loss, observed at - 378 degrees C, is due to phase transition from hydrated zinc oxide to zinc oxide. The band gaps of the products were in the range - 3.26-3.30 eV. The PL spectrum showed that the as-synthesized ZnO nanoparticles had UV (381 nm) and green (537 nm) emissions.

Characterization of single crystalline CdS nanowires synthesized by solvothermal method.

Cadmium sulfide (CdS) nanowires with uniform diameter were prepared by the solvothermal method using ethylenediamine (en) as solvent. The products were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scan electron microscopy (SEM), energy dispersive spectroscopy (EDS) and transmission electron microscopy (TEM). It was found that the products are hexagonal crystals of CdS nanowires with diameter of 28 nm and length up to several micrometres. Selected area electron diffraction (SAED) and high resolution TEM (HRTEM) studies indicate the single-crystalline nature of CdS nanowires with an oriented growth along the c-axis direction. The absorption spectrum of the as-prepared CdS nanowires shows an absorption peak of around 485 nm. These CdS nanowires exhibit bright photoluminescence (PL) with two distinct emission bands at 502 nm and 696 nm.

Investigation of optical, dielectric, and conduction mechanism in lead-free perovskite CsMnBr3.

Metallic perovskites have advantageous optical and electrical properties, making them a valuable class of semiconductors for the manufacturing of solar cells. CsMnBr3 is notable among them due to its important optical characteristics. The electrical and dielectric characteristics as a semiconductor are examined in this study. Direct transitions with a 3.29 eV bandgap and an Urbach energy of 0.96 eV are revealed by the results. Through AC conductivity, it demonstrated semiconductor characteristics at 443 K. The dielectric loss varied with frequency and peaked at high frequencies. Furthermore, as temperature rose, a relaxation peak in the electrical modulus was seen to migrate to higher frequencies. Ac conductivity is described by the double power law expression. The conduction in our compound is governed by small polaron tunneling. Based on the optical results reported in the bibliography for this sample, we realize the importance of examining the electrical characteristics to comprehend the semiconductor behavior of CsMnBr3.

Structural Characterization, Spectroscopic Profile, Molecular Docking, ADMET Properties, Molecular Dynamics Simulation Studies, and Molecular Mechanics Generalized Born Surface Area Analysis of 5-(Adamantan-1-yl)-4-butyl-2,4-dihydro-3H-1,2,4-triazole-3-thione as a Potential COX Inhibitor.

Employing a synergistic combination of theoretical density functional theory (DFT) and experimental techniques, we conducted a comprehensive analysis elucidating the structural and pharmacological attributes of 5-(adamantan-1-yl)-4-butyl-2,4-dihydro-3H-1,2,4-triazole-3-thione (5A4BT) as a potent COX inhibitor. The X-ray crystallographic data of 5A4BT showed the pivotal role played by weak interactions, notably π-π and C-H-π interactions, alongside hydrogen bonding, in orchestrating the intricate supramolecular architectures within the crystalline lattice. A quantitative analysis of the arrangement of the crystal structure, as well as both inter- and intramolecular interactions, was conducted using Hirshfeld surfaces and 2D fingerprint plots. Additionally, a comprehensive examination of the IR spectra was undertaken, employing both experimental methods and theoretical DFT techniques, to elucidate the vibrational characteristics of the compound. The strength of intermolecular N-H···S hydrogen bonding and charge transfer within the system was assessed through natural bonding orbital analysis. Moreover, Bader's atoms in molecules theory was employed to estimate the strength of intermolecular hydrogen bonds, revealing strong interactions within the 5A4BT dimer. The title compound exhibited binding affinities of -6.4 and -6.5 kcal/mol for COX1 (PDB 3KK6) and COX2 (1CX2) target proteins, respectively. For the first time, predictions regarding ADMET properties, drug-likeness, and toxicity, including favorable bioavailability, along with 100 ns molecular dynamics simulations, binding free energy, and energy decomposition per residue in the binding cavity of the protein from molecular mechanics generalized born surface area approach, collectively indicate the potential of 5A4BT as a nonselective COX inhibitor.

Chiral triazolium salts and ionic liquids: from the molecular design vectors to their physical properties through specific supramolecular interactions.

An exhaustive experimental study based on X-ray diffraction analysis, NMR, FTIR-ATR (attenuated total reflection), and Raman spectroscopy as well as theoretical calculations is reported in order to understand how the non-covalent intermolecular contacts are fundamental to explain structure-property relationships and allowing us to correlate a basic macroscopic property (i.e., the melting point, T(m)) with the structural variables of a family of enantiopure 1,4-dialkyl-1,2,4-triazolium salts. The effect of different structural vectors such as the ring size, the spatial disposition of the substituent, the substitution on the oxygen atom, the nature of the anion, or the N4 alkylation of the triazole on the intermolecular interactions of these chiral salts of a well-defined 3D structure is reported. The non-covalent intermolecular contacts mainly implicating the triazolium H3 proton are fundamental to explain structure-property relationships and, therefore, the physical properties of these new chiral salts, rather than simple anion-cation interactions. Overall, our findings highlight the importance of the specific supramolecular interactions for the understanding of the physical properties of triazolium salts and ionic liquids.

Mechanisms of stereomutation and thermolysis of spiro-1,2-oxaphosphetanes: new insights into the second step of the Wittig reaction.

The experimentally observed stereomutation of spiro-1,2-oxaphosphetanes is shown by DFT calculations to proceed through successive M(B2) or M(B4) and M(B3) mechanisms involving two, four, and three Berry pseudorotations at phosphorus, respectively. Oxaphosphetane decomposition takes place in a single step via a polar transition state. The calculated activation parameters for this reaction are in good agreement with those determined experimentally.

A flow-through reaction cell for in situ X-ray diffraction and absorption studies of heterogeneous powder-liquid reactions and phase transformations.

A portable powder-liquid high-corrosion-resistant reaction cell has been designed to follow in situ reactions by X-ray powder diffraction (XRD) and X-ray absorption spectroscopy (XAS) techniques. The cell has been conceived to be mounted on the experimental stations for diffraction and absorption of the Spanish CRG SpLine-BM25 beamline at the European Synchrotron Radiation Facility. Powder reactants and/or products are kept at a fixed position in a vertical geometry in the X-ray pathway by a porous membrane, under forced liquid reflux circulation. Owing to the short pathway of the X-ray beam through the cell, XRD and XAS measurements can be carried out in transmission configuration/mode. In the case of the diffraction technique, data can be collected with either a point detector or a two-dimensional CCD detector, depending on specific experimental requirements in terms of space or time resolution. Crystallization processes, heterogeneous catalytic processes and several varieties of experiments can be followed by these techniques with this cell. Two experiments were carried out to demonstrate the cell feasibility: the phase transformations of layered titanium phosphates in boiling aqueous solutions of phosphoric acid, and the reaction of copper carbonate and L-isoleucine amino acid powders in boiling aqueous solution. In this last case the shrinking of the solid reactants and the formation of Cu(isoleucine)(2) is observed. The crystallization processes and several phase transitions have been observed during the experiments, as well as an unexpected reaction pathway.

Enantioselective multicomponent synthesis of fused 6-5 bicyclic 2-butenolides by a cascade heterobicyclisation process.

The successive coupling of an alkoxy(aryl/heteroaryl)carbene complex of chromium with either a ketone or an imide lithium enolate and then a 3-substituted (H, TMS, PhCH(2), PhCH(2)CH(2), Me) propargylic organomagnesium reagent has afforded novel hydroxy-substituted bicyclic [4.3.0]-γ-alkylidene-2-butenolides with three modular points that has allowed the efficient introduction of molecular complexity, including a homopropargylic alcohol core. The selective formation of these five- or six-component heterobicyclisation products is the result of the regioselective integration of the Grignard reagent as a propargyl fragment followed by a cascade CO/alkyne/CO insertion, ketene trapping and elimination sequence. By using lithium enolates of chiral N-acetyl-2-oxazolidinones and the corresponding propargylic organocerium reagents, both enantiomers of these bicyclic heterocycles were efficiently prepared with very high enantiomeric purity. Architecturally, these fused bicyclic butenolides are characterised by a highly unsaturated and oxygenated core and they exhibit strong blue fluorescence in solution.

Antisymmetric exchange in triangular tricopper(II) complexes: correlation among structural, magnetic, and electron paramagnetic resonance parameters.

Two new trinuclear copper(II) complexes, [Cu(3)(µ(3)-OH)(daat)(Hdat)(2)(ClO(4))(2)(H(2)O)(3)](ClO(4))(2)·2H(2)O (1) and [Cu(3)(µ(3)-OH)(aaat)(3)(H(2)O)(3)](ClO(4))(2)·3H(2)O (2) (daat = 3,5-diacetylamino-1,2,4-triazolate, Hdat = 3,5-diamino-1,2,4-triazole, and aaat = 3-acetylamino-5-amino-1,2,4-triazolate), have been prepared from 1,2,4-triazole derivatives and structurally characterized by X-ray crystallography. The structures of 1 and 2 consist of cationic trinuclear copper(II) complexes with a Cu(3)OH core held by three N,N-triazole bridges between each pair of copper(II) atoms. The copper atoms are five-coordinate with distorted square-pyramidal geometries. The magnetic properties of 1 and 2 and those of five other related 1,2,4-triazolato tricopper(II) complexes with the same triangular structure (3-7) (whose crystal structures were already reported) have been investigated in the temperature range of 1.9-300 K. The formulas of 3-7 are [Cu(3)(µ(3)-OH)(aaat)(3)(H(2)O)(3)](NO(3))(2)·H(2)O (3), {[Cu(3)(µ(3)-OH)(aat)(3)(µ(3)-SO(4))]·6H(2)O}(n) (4), and [Cu(3)(µ(3)-OH)(aat)(3)A(H(2)O)(2)]A·xH(2)O [A = NO(3)(-) (5), CF(3)SO(3)(-) (6), or ClO(4)(-) (7); x = 0 or 2] (aat =3-acetylamino-1,2,4-triazolate). The magnetic and electron paramagnetic resonance (EPR) data have been analyzed by using the following isotropic and antisymmetric exchange Hamiltonian: H = -J[S(1)S(2) + S(2)S(3)] - j[S(1)S(3)] + G[S(1) × S(2) + S(2) × S(3) + S(1) × S(3)]. 1-7 exhibit strong antiferromagnetic coupling (values for both -J and -j in the range of 210-142 cm(-1)) and antisymmetric exchange (G varying from to 27 to 36 cm(-1)). At low temperatures, their EPR spectra display high-field (g < 2.0) signals indicating that the triangles present symmetry lower than equilateral and that the antisymmetric exchange is operative. A magneto-structural study showing a lineal correlation between the Cu-O-Cu angle of the Cu(3)OH core and the isotropic exchange parameters (J and j) has been conducted. Moreover, a model based on Moriya's theory that allows the prediction of the occurrence of antisymmetric exchange in the tricopper(II) triangles, via analysis of the overlap between the ground and excited states of the local Cu(II) ions, has been proposed. In addition, analytical expressions for evaluating both the isotropic and antisymmetric exchange parameters from the experimental magnetic susceptibility data of triangular complexes with local spins (S) of (1)/(2), (3)/(2), or (5)/(2) have been purposely derived. Finally, the magnetic and EPR results of this work are discussed and compared with those of other tricopper(II) triangles reported in the literature.

A binuclear Mn(III) complex of a scorpiand-like ligand displaying a single unsupported Mn(III)-O-Mn(III) bridge.

The crystal structure of a binuclear Mn(III) complex of a scorpiand-like ligand (L) displays an unsupported single oxo bridging ligand with a Mn(III)-O-Mn(III) angle of 174.7°. Magnetic susceptibility measurements indicate strong antiferromagnetic coupling between the two metal centers. DFT calculations have been carried out to understand the magnetic behavior and to analyze the nature of the observed Jahn-Teller distortion. Paramagnetic (1)H NMR has been applied to rationalize the formation and magnetic features of the complexes formed in solution.

Series of metal organic frameworks assembled from Ln(III), Na(I), and chiral flexible-achiral rigid dicarboxylates exhibiting tunable UV-vis-IR light emission.

Two series of isoreticular chiral metal-organic frameworks assembled from Ln(III) (Ln = Sm, Eu, Gd, Tb, Dy, Ho, Er, Yb), Na(I), and chiral flexible-achiral rigid dicarboxylate ligands, formulated as [NaLn(Tart)(BDC)(H(2)O)(2)] (S1) and [NaLn(Tart)(biBDC)(H(2)O)(2)] (S2) (H(2)Tart = tartaric acid; H(2)BDC = terephthalic acid; H(2)biBDC = biphenyl-4,4'-dicarboxylic acid), were obtained as single phases under hydrothermal conditions. The compounds have been studied by single-crystal and powder X-ray diffraction, thermal analyses (TG-MS and DSC), vibrational spectroscopy (FTIR), scanning electron microscopy (SEM-EDX), elemental analysis, and X-ray thermodiffractometry. The catalytic activity has been also investigated. The photoluminescence properties of selected compounds have been investigated, exhibiting room temperature tunable UV-vis-IR light emission.

Transformations of diphenylphosphinothioic acid tertiary amides mediated by directed ortho metallation.

ortho-Lithiation of N,N-diisopropyl-P,P-diphenylphosphinothioic amide using n-BuLi in the presence of TMEDA in diethyl ether followed by electrophilic trapping is described as an efficient method for the synthesis of ortho-functionalised derivatives in high yields. The structural modification of the phosphinothioic amide includes C-X (X = P, S, Si, Sn, I) and C-C bond forming reactions with a large variety of electrophiles. Additional applications based on functional group transformations are also reported. They include imine formation, desulfurization and Suzuki cross-coupling reactions on selected compounds.

(E)-1-[1-(4-Chloro-phen-yl)ethyl-idene]thio-semicarbazide.

In the crystal structure of the title compound, C(9)H(10)ClN(3)S, the mol-ecules form chains parallel to [001] through N-H⋯S hydrogen bonds. In addition, weak inter-molecular N-H⋯Cl hydrogen bonds connect the chains, forming a two-dimensional network parallel to (001).