Microcarriers Based on Glycosaminoglycan-Like Marine Exopolysaccharide for TGF-ß1 Long-Term Protection.

Articular cartilage is an avascular, non-innervated connective tissue with limited ability to regenerate. Articular degenerative processes arising from trauma, inflammation or due to aging are thus irreversible and may induce the loss of the joint function. To repair cartilaginous defects, tissue engineering approaches are under intense development. Association of cells and signalling proteins, such as growth factors, with biocompatible hydrogel matrix may lead to the regeneration of the healthy tissue. One current strategy to enhance both growth factor bioactivity and bioavailability is based on the delivery of these signalling proteins in microcarriers. In this context, the aim of the present study was to develop microcarriers by encapsulating Transforming Growth Factor-ß1 (TGF-ß1) into microparticles based on marine exopolysaccharide (EPS), namely GY785 EPS, for further applications in cartilage engineering. Using a capillary microfluidic approach, two microcarriers were prepared. The growth factor was either encapsulated directly within the microparticles based on slightly sulphated derivative or complexed firstly with the highly sulphated derivative before being incorporated within the microparticles. TGF-ß1 release, studied under in vitro model conditions, revealed that the majority of the growth factor was retained inside the microparticles. Bioactivity of released TGF-ß1 was particularly enhanced in the presence of highly sulphated derivative. It comes out from this study that GY785 EPS based microcarriers may constitute TGF-ß1 reservoirs spatially retaining the growth factor for a variety of tissue engineering applications and in particular cartilage regeneration, where the growth factor needs to remain in the target location long enough to induce robust regenerative responses.

Pectin-modifying enzymes and pectin-derived materials: applications and impacts.

Pectins are complex branched polysaccharides present in primary cell walls. As a distinctive feature, they contain high amount of partly methyl-esterified galacturonic acid and low amount of rhamnose and carry arabinose and galactose as major neutral sugars. Due to their structural complexity, they are modifiable by many different enzymes, including hydrolases, lyases, and esterases. Their peculiar structure is the origin of their physicochemical properties. Among others, their remarkable gelling properties make them a key additive for food industries. Pectin-degrading enzymes and -modifying enzymes may be used in a wide variety of applications to modulate pectin properties or produce pectin derivatives and oligosaccharides with functional as well as nutritional interests. This paper reviews the scientific information available on pectin structure, pectin-modifying enzymes, and the use of enzymes to produce pectin with controlled structure or pectin-derived oligosaccharides, with functional or nutritional interesting properties.

Mobility of pectin methylesterase in pectin/cellulose gels is enhanced by the presence of cellulose and by its catalytic capacity.

The pectin methylesterase action is usually studied in a homogeneous aqueous medium in the presence of a large excess of soluble substrate and water. However in the cell wall, the water content is much lower, the substrate is cross-linked with itself or with other polymers, and the enzyme has to diffuse through the solid matrix before catalysing the linkage breakdown. As plant primary cell walls can be considered as cellulose-reinforced hydrogels, this study investigated the diffusion of a fungal pectin methylesterase in pectin/cellulose gels used as cell wall-mimicking matrix to understand the impact of this matrix and its (micro) structure on the enzyme's diffusion within it. The enzyme mobility was followed by synchrotron microscopy thanks to its auto-fluorescence after deep-UV excitation. Time-lapse imaging and quantification of intensity signal by image analysis revealed that the diffusion of the enzyme was impacted by at least two criteria: (i) only the active enzyme was able to diffuse, showing that the mobility was related to the catalytic ability, and (ii) the diffusion was improved by the presence of cellulose in the gel.

Thermal, conformational and rheological properties of κ-carrageenan-sodium stearoyl lactylate gels and solutions.

Polysaccharide-surfactant blends are widely used in foods. However, their possible mutual interactions have not been extensively studied. The purpose of this work was to examine how the anionic surfactant sodium stearoyl lactylate (SSL) affects different properties of κ-carrageenan solutions and gels. Rheometry, differential scanning calorimetry, asymmetrical flow field-flow fractionation coupled with multiangle laser light scattering, among others, were used to determine the flow and viscoelastic behavior, thermal transitions, and conformation changes, respectively. Interference caused by SSL is postulated as the primary factor to explain the variations in the conformation of κ-carrageenan in gels and solutions. However, electrostatic repulsions between κ-carrageenan and SSL can also be involved. These latter interactions are more important for high SSL concentrations (13 mmol dm-3) without addition of KCl, because of the higher net negative charge density of the system. SSL significantly modifies the properties of κ-carrageenan in aqueous media.

A dextran with unique rheological properties produced by the dextransucrase from Oenococcus kitaharae DSM 17330.

A gene encoding a novel dextransucrase was identified in the genome of Oenococcus kitaharae DSM17330 and cloned into E. coli. With a kcat of 691s-1 and a half-life time of 111h at 30°C, the resulting recombinant enzyme -named DSR-OK- stands as one of the most efficient and stable dextransucrase characterized to date. From sucrose, this enzyme catalyzes the synthesis of a quasi linear dextran with a molar mass higher than 1×109g·mol-1 that presents uncommon rheological properties such as a higher viscosity than that of the most industrially used dextran from L. mesenteroides NRRL-B-512F, a yield stress that was never described before for any type of dextran, as well as a gel-like structure. All these properties open the way to a vast array of new applications in health, food/feed, bulk or fine chemicals fields.

Comparison of Various Indices of Energy Metabolism in Recumbent and Healthy Dairy Cows.

BACKGROUND: Downer cow syndrome (DCS) is often diagnosed in dairy cattle during the early post-partum period. The etiology of this condition is not completely understood, as it can be related to the energetic or electrolyte metabolism, as well as to infectious diseases or to trauma. HYPOTHESIS/OBJECTIVES: The aim of this study is to compare energy metabolism and insulin sensitivity indices and various biochemical parameters between recumbent and healthy dairy cows. ANIMALS: A prospective study has been undertaken on 361 recumbent and 80 healthy Holstein cows. METHODS: Plasmatic glucose, insulin, non-esterified fatty acid (NEFA) and ß-hydroxybutyrate (BHB) were assayed in all cows in order to calculate the insulin sensitivity indices but also minerals (Calcium, Phosphorous and Magnesium), thyroxin and creatine kinase. Body Condition Scores (BCS) was assessed. RESULTS: Significant differences in NEFA, and the glucose and insulin sensitivity indices ("Homeostasis Model Assessment" HOMA, "Revised Quantitative Insulin Sensitivity Check Index" RQUICKI, RQUICKI-BHB) were observed between healthy and recumbent cows in the early post-parturient period indicating disturbances of glucose and insulin homeostasis in the recumbent cows. In the same manner, mineral concentrations were significantly different between healthy and recumbent cows. Glucose, insulin NEFA, and HOMA, were different between early post-partum downer cows and the DCS-affected cows later in lactation. CONCLUSION AND CLINICAL IMPORTANCE: Results indicate disturbances in energy homeostasis in DCS-affected dairy cows. Further research should determine a prognostic value of the indices in cows suffering from recumbency of metabolic origin.

Rheological study of reinforcement of agarose hydrogels by cellulose nanowhiskers.

The influence of the addition of tunicate cellulose nanowhiskers on the structural and rheological properties of an agarose hydrogel matrix has been studied, with the objective to design innovative green material, with good mechanical properties. The cellulose nanowhiskers were characterized using transmission electron microscopy, and their charge surface density was determined by a titration method. Oscillatory shear and stress relaxation tests were performed in order to characterize the rheological properties of the agarose matrix, and of the agarose hydrogels filled by nanowhiskers at volume fractions below 0.2%. The results show a significant reinforcement effect due to the addition of nanowhiskers, and suggest changes in the matrix network structure induced by the cellulose nanoparticles.

Assessment of in vitro binding of isolated pectic domains to cellulose by adsorption isotherms, electron microscopy, and X-ray diffraction methods.

Isolated pectic domains representative of the pectic backbone and the neutral sugar side chains were tested for their ability to interact with cellulose in comparison to the well-known binding of xyloglucan. Pectic side chains displayed a significant in vitro binding capacity to cellulose, whereas pectic backbone domains exhibited only slight adsorption to cellulose microfibrils. To support the binding results, electron microscopy and X-ray diffraction were applied. Celluloses from bacteria and sugar beet cell walls were used as substrates for the precipitation of isolated pectic domains or xyloglucan by acetone vapor diffusion. Pectic side chains grew attached to the cellulose surfaces, whereas pectic backbone domains were observed separately from cellulose microfibrils. Xyloglucan seeded with cellulose provoked a decrease of microfibrils entanglement, but no clear cross-links between neighboring microfibrils were observed. These results led to the elucidation of the pectic domains responsible for binding with cellulose microfibrils.

Influence of the NaCl or CaCl2 concentration on the structure of heat-set bovine serum albumin gels at pH 7.

The structure of heat-set systems of the globular protein bovine serum albumin (BSA) was investigated at pH 7 in different salt conditions (NaCl or CaCl(2)) using light scattering. Cross-correlation dynamic light scattering was used to correct for multiple scattering from turbid samples. After heat treatment, aggregates are formed whose size increases as the protein concentration increases. Beyond a critical concentration that decreases with increasing salt concentration, gels are formed. The heterogeneity and the reduced turbidity of the gels were found to increase with increasing salt concentration and to decrease with increasing protein concentration. The structure of the gels is determined by the strength of the repulsive electrostatic interactions between the aggregated proteins. The results obtained in NaCl are similar to those reported in previous studies for other globular proteins. CaCl(2) was found to be much more efficient in reducing electrostatic interactions than NaCl at the same ionic strength.

Evidence for in vitro binding of pectin side chains to cellulose.

Pectins of varying structures were tested for their ability to interact with cellulose in comparison to the well-known adsorption of xyloglucan. Our results reveal that sugar beet (Beta vulgaris) and potato (Solanum tuberosum) pectins, which are rich in neutral sugar side chains, can bind in vitro to cellulose. The extent of binding varies with respect to the nature and structure of the side chains. Additionally, branched arabinans (Br-Arabinans) or debranched arabinans (Deb-Arabinans; isolated from sugar beet) and galactans (isolated from potato) were shown bind to cellulose microfibrils. The adsorption of Br-Arabinan and galactan was lower than that of Deb-Arabinan. The maximum adsorption affinity of Deb-Arabinan to cellulose was comparable to that of xyloglucan. The study of sugar beet and potato alkali-treated cell walls supports the hypothesis of pectin-cellulose interaction. Natural composites enriched in arabinans or galactans and cellulose were recovered. The binding of pectins to cellulose microfibrils may be of considerable significance in the modeling of primary cell walls of plants as well as in the process of cell wall assembly.

Heat-induced gelation of bovine serum albumin/low-methoxyl pectin systems and the effect of calcium ions.

Influence of low-methoxyl pectin (LM pectin) and calcium ions (3 mM) on mechanical behavior and microstructure of bovine serum albumin (BSA) gels (pH 6.8, in 0.1 M NaCl) was evaluated. Protein and LM pectin concentrations were fixed at 2, 4, and 8 wt % and 0.21, 0.43, and 0.85 wt %, respectively. Rheological measurements and confocal laser scanning microscopy coupled with texture image analysis by use of the co-occurrence method were performed. Heat treatment of BSA/LM pectin mixtures induced protein gelation and a phase separation process between the two biopolymers, which was kinetically trapped. Calcium ions induced pectin gelation and modified BSA gel properties. Depending on biopolymer concentrations, a balance between pectin and/or protein gel contribution on final gel strength exists. The microstructures of the mixed systems in the presence of calcium can be interpreted as interpenetrated structures. Texture image analysis allowed one to classify more precisely the different microstructures observed in relation with mechanical properties.