RESUMO
Bioemulsions are attractive platforms for the scalable expansion of adherent cells and stem cells. In these systems, cell adhesion is enabled by the assembly of protein nanosheets that display high interfacial shear moduli and elasticity. However, to date, most successful systems reported to support cell adhesion at liquid substrates have been based on coassemblies of protein and reactive cosurfactants, which limit the translation of bioemulsions. In this report, we describe the design of protein nanosheets based on two globular proteins, bovine serum albumin (BSA) and ß-lactoglobulin (BLG), biofunctionalized with RGDSP peptides to enable cell adhesion. The interfacial mechanics of BSA and BLG assemblies at fluorinated liquid-water interfaces is studied by interfacial shear rheology, with and without cosurfactant acyl chloride. Conformational changes associated with globular protein assembly are studied by circular dichroism and protein densities at fluorinated interfaces are evaluated via surface plasmon resonance. Biofunctionalization mediated by sulfo-succinimidyl 4-(N-maleimidomethyl) cyclohexane-1-carboxylate (sulfo-SMCC) is studied by fluorescence microscopy. On the basis of the relatively high elasticities observed in the case of BLG nanosheets, even in the absence of cosurfactant, the adhesion and proliferation of mesenchymal stem cells and human embryonic kidney (HEK) cells on bioemulsions stabilized by RGD-functionalized protein nanosheets is studied. To account for the high cell spreading and proliferation observed at these interfaces, despite initial moderate interfacial elasticities, the deposition of fibronectin fibers at the surface of corresponding microdroplets is characterized by immunostaining and confocal microscopy. These results demonstrate the feasibility of achieving high cell proliferation on bioemulsions with protein nanosheets assembled without cosurfactants and establish strategies for rational design of scaffolding proteins enabling the stabilization of interfaces with strong shear mechanics and elasticity, as well as bioactive and cell adhesive properties. Such protein nanosheets and bioemulsions are proposed to enable the development of new generations of bioreactors for the scale up of cell manufacturing.
Assuntos
Soroalbumina Bovina , Tensoativos , Humanos , Tensoativos/química , Propriedades de Superfície , Soroalbumina Bovina/química , Lipoproteínas , Proliferação de Células , ReologiaRESUMO
DNA is programmed to hierarchically self-assemble into superstructures spanning from nanometer to micrometer scales. Here, we demonstrate DNA nanosheets assembled out of a rationally designed flexible DNA unit (F-unit), whose shape resembles a Feynman diagram. F-units were designed to self-assemble in two dimensions and to display a high DNA density of hydrophobic moieties. oxDNA simulations confirmed the planarity of the F-unit. DNA nanosheets with a thickness of a single DNA duplex layer and with large coverage (at least 30 µm × 30 µm) were assembled from the liquid phase at the solid/liquid interface, as unambiguously evidenced by atomic force microscopy imaging. Interestingly, single-layer nanodiscs formed in solution at low DNA concentrations. DNA nanosheet superstructures were further assembled at liquid/liquid interfaces, as demonstrated by the fluorescence of a double-stranded DNA intercalator. Moreover, the interfacial mechanical properties of the nanosheet superstructures were measured as a response to temperature changes, demonstrating the control of interfacial shear mechanics based on DNA nanostructure engineering. The rational design of the F-unit, along with the presented results, provide an avenue toward the controlled assembly of reconfigurable/responsive nanosheets and membranes at liquid/liquid interfaces, to be potentially used in the characterization of biomechanical processes and materials transport.
Assuntos
Nanoestruturas , Nanotecnologia , Nanotecnologia/métodos , Nanoestruturas/química , Microscopia de Força Atômica , Simulação por Computador , DNA/químicaRESUMO
Highly stretchable electrically conductive hydrogels have been extensively researched in recent years, especially for applications in strain and pressure sensing, electronic skin, and implantable bioelectronic devices. Herein, we present a new cross-linked complex coacervate approach to prepare conductive hydrogels that are both highly stretchable and compressive. The gels involve a complex coacervate between carboxylated nanogels and branched poly(ethylene imine), whereby the latter is covalently cross-linked by poly(ethylene glycol) diglycidyl ether (PEGDGE). Inclusion of graphene nanoplatelets (Gnp) provides electrical conductivity as well as tensile and compressive strain-sensing capability to the hydrogels. We demonstrate that judicious selection of the molecular weight of the PEGDGE cross-linker enables the mechanical properties of these hydrogels to be tuned. Indeed, the gels prepared with a PEGDGE molecular weight of 6000 g/mol defy the general rule that toughness decreases as strength increases. The conductive hydrogels achieve a compressive strength of 25 MPa and a stretchability of up to 1500%. These new gels are both adhesive and conformal. They provide a self-healable electronic circuit, respond rapidly to human motion, and can act as strain-dependent sensors while exhibiting low cytotoxicity. Our new approach to conductive gel preparation is efficient, involves only preformed components, and is scalable.
Assuntos
Grafite , Dispositivos Eletrônicos Vestíveis , Adesivos , Condutividade Elétrica , Humanos , HidrogéisRESUMO
Dynamic photoresponsive synthetic hydrogels offer important advantages for biomaterials design, from the ability to cure hydrogels and encapsulate cells in situ to the light-mediated control of cell-spreading and tissue formation. We report the facile and effective photocuring and photoremodeling of disulfide-cross-linked hyaluronic acid hydrogels, based on photo-oxidation of corresponding thiol residues and their radical-mediated photodegradation. We find that the mechanical properties of disulfide hydrogels and the extent of their photoremodeling can be tuned by controlling the photo-oxidation and photodegradation reactions, respectively. This enables not only the photopatterning of the mechanical properties of hydrogels but also their self-healing and photomediated healing. Finally, we demonstrate the ability to encapsulate mesenchymal stromal cells within these materials and to regulate their protrusion and spreading in 3D matrices by controlling the mechanical properties of the disulfide networks. Therefore, synthetically accessible photoconfigurable disulfide hydrogels offer interesting opportunities for the design of soft biomaterials and the regulation of cell encapsulation and matrix remodeling for tissue engineering.
Assuntos
Ácido Hialurônico , Hidrogéis , Materiais Biocompatíveis , Dissulfetos , Compostos de SulfidrilaRESUMO
The non-specific adhesion of polymers and soft tissues is of great interest to the field of biomedical engineering, as it will shed light on some of the processes that regulate interactions between scaffolds, implants and nanoparticles with surrounding tissues after implantation or delivery. In order to promote adhesion to soft tissues, a greater understanding of the relationship between polymer chemistry and nanoscale adhesion mechanisms is required. In this work, we grew poly(dimethylaminoethyl methacrylate) (PDMAEMA), poly(acrylic acid) (PAA) and poly(oligoethylene glycol methacrylate) (POEGMA) brushes from the surface of silica beads, and investigated their adhesion to a variety of substrates via colloidal probe-based atomic force microscopy (AFM). We first characterised adhesion to a range of substrates with defined surface chemistry (self-assembled monolayers (SAMs) with a range of hydrophilicities, charge and hydrogen bonding), before studying the adhesion of brushes to epithelial cell monolayers (primary keratinocytes and HaCaT cells) and soft tissues (porcine epicardium and keratinized gingiva). Adhesion assays to SAMs reveal the complex balance of interactions (electrostatic, van der Waals interactions and hydrogen bonding) regulating the adhesion of weak polyelectrolyte brushes. This resulted in particularly strong adhesion of PAA brushes to a wide range of surface chemistries. In turn, colloidal probe microscopy on cell monolayers highlighted the importance of the glycocalyx in regulating non-specific adhesions. This was also reflected by the adhesive properties of soft tissues, in combination with their mechanical properties. Overall, this work clearly demonstrates the complex nature of interactions between polymeric biomaterials and biological samples and highlights the need for relatively elaborate models to predict these interactions.
Assuntos
Materiais Biocompatíveis/química , Gengiva/química , Queratinócitos/química , Pericárdio/química , Polieletrólitos/química , Proteínas/química , Acrilatos/química , Animais , Linhagem Celular , Humanos , Ligação de Hidrogênio , Interações Hidrofóbicas e Hidrofílicas , Metacrilatos/química , Nylons/química , Polietilenoglicóis/química , Propriedades de Superfície , SuínosRESUMO
The complex solution behavior of polymer brushes is key to control their properties, including for biomedical applications and catalysis. The swelling behavior of poly(dimethyl aminoethyl methacrylate) (PDMAEMA) and poly(2-(methacryloyloxy)ethyl trimethylammonium chloride) (PMETAC) in response to changes in pH, solvent, and salt types has been investigated using atomistic molecular dynamics simulations. PDMAEMA and PMETAC have been selected as canonical models for weak and strong polyelectrolytes whose complex conformational behavior is particularly challenging for the development and validation of atomistic models. The GROMOS-derived atomic parameters reproduce the experimental swelling coefficients obtained from ellipsometry measurements for brushes of 5-15 nm thickness. The present atomistic models capture the protonated morphology of PDMAEMA, the swollen and collapsed conformations of PDMAEMA and PMETAC in good and bad solvents, and the salt-selective response of PMETAC. The modular nature of the molecular models allows for the simple extension of atomic parameters to a variety of polymers or copolymers.
RESUMO
Polymer brushes are attractive candidates for the design of gene delivery vectors as they allow the systematic study of the impact of structural (type, size, and shape of nanomaterials core) and physicochemical parameters (cationic monomer chemistry, brush thickness, and grafting density) on transfection efficiency. However, relatively little is known of their interactions of oligonucleotides. To study such interactions, we use surface plasmon resonance and developed a kinetic model of brush binding and infiltration. We identify the striking impact that brush grafting density and thickness have on oligonucleotide kinetics of infiltration, binding affinity, and maximum loading. Surprisingly, double-stranded RNA molecules are found to load at significantly higher levels compared to DNA molecules of identical sequence (apart from uracils/thymines). Furthermore, analysis of the kinetics of adsorption of these oligonucleotides indicates that the stoichiometry of binding (ratio of amine versus phosphate residues) is close to parity for the uptake of 20 bp double-stranded RNA. Finally, nanoparticles were designed to be used as gene transfection vectors and to quantify if the brush grafting density and thickness significantly impact transfection efficiencies in a small interfering RNA knockdown assay. Therefore, this study demonstrates the rational design of polymer brush-based nanoparticle vectors for efficient delivery of oligonucleotides. The model developed will allow to uncover how the refinement of the physicochemical and structural properties of polymer brushes enable the tuning of RNA binding and allow the systematic study of cationic vectors efficiency for RNA delivery.
Assuntos
Técnicas de Transferência de Genes , Vetores Genéticos/química , Modelos Químicos , Oligonucleotídeos/química , RNA de Cadeia Dupla/química , Ressonância de Plasmônio de Superfície , Linhagem Celular , Humanos , CinéticaRESUMO
Inflammatory conditions are frequently accompanied by increased levels of active proteases, and there is rising interest in methods for their detection to monitor inflammation in a point of care setting. In this work, new sensor materials for disposable single-step protease biosensors based on poly(2-oxazoline) hydrogels cross-linked with a protease-specific cleavable peptide are described. The performance of the sensor material was assessed targeting the detection of matrix metalloproteinase-9 (MMP-9), a protease that has been shown to be an indicator of inflammation in multiple sclerosis and other inflammatory conditions. Films of the hydrogel were formed on gold-coated quartz crystals using thiol-ene click chemistry, and the cross-link density was optimized. The degradation rate of the hydrogel was monitored using a quartz crystal microbalance (QCM) and showed a strong dependence on the MMP-9 concentration. A concentration range of 0-160 nM of MMP-9 was investigated, and a lower limit of detection of 10 nM MMP-9 was determined.
Assuntos
Técnicas Biossensoriais , Metaloproteinase 9 da Matriz/análise , Oxazóis/química , Peptídeos/química , Técnicas de Microbalança de Cristal de Quartzo , HumanosRESUMO
Peptide cross-linked poly(ethylene glycol) hydrogel has been widely used for drug delivery and tissue engineering. However, the use of this material as a biosensor for the detection of collagenase has not been explored. Proteases play a key role in the pathology of diseases such as rheumatoid arthritis and osteoarthritis. The detection of this class of enzyme using the degradable hydrogel film format is promising as a point-of-care device for disease monitoring. In this study, a protease biosensor was developed based on the degradation of a peptide cross-linked poly(ethylene glycol) hydrogel film and demonstrated for the detection of collagenase. The hydrogel was deposited on gold-coated quartz crystals, and their degradation in the presence of collagenase was monitored using a quartz crystal microbalance (QCM). The biosensor was shown to respond to concentrations between 2 and 2000 nM in less than 10 min with a lower detection limit of 2 nM.
Assuntos
Técnicas Biossensoriais , Colagenases/isolamento & purificação , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Peptídeos/química , Colagenases/química , Reagentes de Ligações Cruzadas/química , Limite de Detecção , Polietilenoglicóis/química , Técnicas de Microbalança de Cristal de QuartzoRESUMO
Adherent cell culture typically requires cell spreading at the surface of solid substrates to sustain the formation of stable focal adhesions and assembly of a contractile cytoskeleton. However, a few reports have demonstrated that cell culture is possible on liquid substrates such as silicone and fluorinated oils, even displaying very low viscosities (0.77 cSt). Such behavior is surprising as low viscosity liquids are thought to relax much too fast (Assuntos
Adesão Celular
, Nanoestruturas/química
, Proteínas/química
, Adsorção
, Animais
, Materiais Biocompatíveis/química
, Fenômenos Biomecânicos
, Bovinos
, Linhagem Celular
, Proliferação de Células
, Halogenação
, Humanos
, Microscopia de Força Atômica
, Nanoestruturas/ultraestrutura
, Óleos/química
, Soroalbumina Bovina/química
, Propriedades de Superfície
, Tensoativos/química
, Viscosidade
RESUMO
The high density of polymer brushes confers to these coatings unique physicochemical properties, in particular for the regulation of biomolecular interaction and the design of highly selective coatings for biosensors and protein patterning. Here, we show that high density poly(dimethylaminoethyl methacrylate) cationic polymer brushes enable the stable uptake of high levels of oligonucleotides. This is proposed to result from the high degree of crowding and associated increase in entropic driving force for the binding of polyelectrolytes such as nucleic acid molecules. We further demonstrate the ease with which such coatings allow the design of highly structured nanomaterials for siRNA delivery using block copolymer-brush-based nanoparticles that allow the protection of oligonucleotides by a protein-resistant outer block. In particular, these nanomaterials display a high serum stability and low cytotoxicity while retaining excellent knock down efficiencies. Polymer brush-based nanomaterials therefore appear particularly attractive for the rational design of a new generation of high performance theranostics and RNA delivery probes.
Assuntos
Técnicas de Transferência de Genes , Vetores Genéticos , Teste de Materiais , RNA , Células A549 , Linhagem Celular , Vetores Genéticos/química , Vetores Genéticos/genética , Vetores Genéticos/metabolismo , Vetores Genéticos/farmacologia , Células HeLa , Humanos , Queratinócitos , RNA/biossíntese , RNA/químicaRESUMO
Thiol-ene radical coupling is increasingly used for the biofunctionalization of biomaterials. Thiol-ene chemistry presents interesting features that are particularly attractive for platforms requiring specific reactions with peptides or proteins and the patterning of cells, such as reactivity in physiological conditions and photoactivation. In this work, we synthesized alkene-functionalized (allyl and norbornene residues) antifouling polymer brushes (based on poly(oligoethylene glycol methacrylate)) and studied thiol-ene coupling with a series of thiols including cell adhesive peptides RGD and REDV. The adhesion of umbilical vein endothelial cells (HUVECs) to these interfaces was studied and highlighted the absence of specific integrin engagement to REDV, in contrast to the high level of cell spreading observed on RGD-functionalized polymer brushes. This revealed that α4ß1 integrins (binding to REDV sequences) are not sufficient on their own to sustain HUVEC spreading, in contrast to αvß3 and α5ß1 integrins. In addition, we photopatterned peptides at the surface of poly(oligoethylene glycol methacrylate) (POEGMA) brushes and characterized the quality of the resulting arrays by epifluorescence microscopy and atomic force microscopy (AFM). This allowed the formation of cell patterns and demonstrated the potential of thiol-ene based photopatterning for the design of cell microarrays.
Assuntos
Materiais Biocompatíveis/química , Adesão Celular , Células Endoteliais da Veia Umbilical Humana/efeitos dos fármacos , Análise Serial de Tecidos/métodos , Células Endoteliais da Veia Umbilical Humana/fisiologia , Humanos , Metacrilatos/química , Oligopeptídeos/químicaRESUMO
Polymer brush-functionalized nanomaterials offer interesting features for the design of gene delivery vectors as their physicochemical and structural properties can be designed independently of the chemistry, size and shape of the nanomaterial core. However, little is known of the parameters regulating the adsorption and infiltration of DNA molecules at the surface of positively charged polymer brushes, despite the importance of such processes for gene delivery. Here we investigate the role of the molecular environment (e.g., pH, type of buffer, concentration) on the interactions between plasmid DNA and positively charged poly(dimethylaminoethyl methacrylate) (PDMAEMA) brushes using a combination of light scattering, electrophoretic light scattering, in situ ellipsometry, and surface plasmon resonance. We show that the conformation of swollen PDMAEMA brushes is modulated by the surrounding buffer and that this impacts strongly on the ability of such brushes and nanomaterials based on these coatings to complex DNA molecules. In turn, the levels of transfection efficiency measured correlate with changes in brush conformation and DNA binding. Therefore, this work demonstrates the importance of molecular design of polymer brushes to control DNA complexation and release in order to optimize the performance of polymer brush-functionalized nanomaterials for gene delivery applications.
Assuntos
DNA/química , Polímeros/química , Soluções/química , Transfecção/métodos , Técnicas de Transferência de Genes , Metacrilatos/química , Nanoestruturas/química , Nylons/química , Plasmídeos/químicaRESUMO
Thiol-ene radical coupling is increasingly used for the biofunctionalization of biomaterials and the formation of 3D hydrogels enabling cell encapsulation. Indeed, thiol-ene chemistry presents interesting features that are particularly attractive for platforms requiring specific reactions of peptides or proteins, in particular, in situ, during cell culture or encapsulation. Despite such interest, little is known about the factors impacting thiol-ene chemistry in situ, under biologically relevant conditions. Here we explore some of the molecular parameters controlling photoinitiated thiol-ene couplings with a series of alkenes and thiols, including peptides, in buffered conditions. (1)H NMR and HPLC were used to quantify the efficiency of couplings and the impact of the pH of the buffer, as well as the molecular structure and local microenvironment close to alkenes and thiols to be coupled. Some of these observations are supported by molecular dynamics and quantum mechanics calculations. An important finding of our work is that the pKa of thiols (and its variation upon changes in molecular structure) have a striking impact on coupling efficiencies. Similarly, positively charged and aromatic amino acids are found to have some impact on thiol-ene couplings. Hence, our study demonstrates that molecular design should be carefully selected in order to achieve high biofunctionalization levels in biomaterials with peptides or promote the efficient formation of peptide-based hydrogels.
Assuntos
Alcenos/química , Compostos de Sulfidrila/química , Soluções Tampão , Cisteína/química , Concentração de Íons de Hidrogênio , Modelos Moleculares , Conformação Molecular , Peptídeos/químicaRESUMO
We show that the nanoscale adhesion geometry controls the spreading and differentiation of epidermal stem cells. We find that cells respond to such hard nanopatterns similarly to their behavior on soft hydrogels. Cellular responses were seen to stem from local changes in diffusion dynamics of the adapter protein vinculin and associated impaired mechanotransduction rather than impaired recruitment of proteins involved in focal adhesion formation.
Assuntos
Adesões Focais/metabolismo , Mecanotransdução Celular , Nanoestruturas/ultraestrutura , Células-Tronco/citologia , Vinculina/metabolismo , Materiais Biocompatíveis/química , Adesão Celular , Diferenciação Celular , Células Cultivadas , Humanos , Queratinócitos/citologia , Queratinócitos/metabolismo , Nanoestruturas/química , Fosforilação , Células-Tronco/metabolismoRESUMO
Targeted delivery of drugs to specific diseased sites in the body is an area of research that has attracted many studies, particularly in drug deliveries that utilize microparticles. By achieving targeted delivery of a drug, one can increase the efficacy of the treatment, thus, reducing unwanted side effects. This study aims to synthesize microcapsules that are able to target and adsorb to specific proteins (i.e., collagen type IV and fibronectin) through antibody-antigen interactions, while simultaneously suppressing any unspecific binding, a characteristic that is commonly observed in polyelectrolyte microcapsule-protein interactions. This is accomplished by creating an antibody-functionalized poly(ethylene glycol) (PEG) assembly within the microcapsule structure. Site-specific adsorption of these microcapsules is tested using protein micropatterns. Results show that significant adsorption is achieved on the target protein, with unspecific adsorptions being heavily suppressed on control proteins. In conclusion, we have successfully manufactured microcapsules that specifically and exclusively bind to their complementary target area. This paves the way for future in vivo experiments using microcapsules as targeted drug carriers.
Assuntos
Portadores de Fármacos/síntese química , Polietilenoglicóis/síntese química , Adsorção , Anticorpos Imobilizados/química , Anticorpos Monoclonais Murinos/química , Cápsulas , Colágeno Tipo IV/química , Fibronectinas/química , Humanos , Ligação Proteica , Propriedades de SuperfícieRESUMO
Protein emulsifiers play an important role in formulation science, from food product development to emerging applications in biotechnologies. The impact of mixed protein assemblies on surface composition and interfacial shear mechanics remains broadly unexplored, in comparison to the impact that formulation has on dilatational mechanics and surface tension or pressure. In this report, we use interfacial shear rheology to quantify the evolution of interfacial shear moduli as a function of composition in bovine serum albumin (BSA)/ß-casein mixed assemblies. We present the pronounced difference in mechanics of these two protein, at oil interfaces, and observe the dominance of ß-casein in regulating interfacial shear mechanics. This observation correlates well with the strong asymmetry of adsorption of these two proteins, characterised by fluorescence microscopy. Using neutron reflectometry and fluorescence recovery after photobleaching, we examine the architecture of corresponding protein assemblies and their surface diffusion, providing evidence for distinct morphologies, but surprisingly comparable diffusion profiles. Finally, we explore the impact of crosslinking and sequential protein adsorption on the interfacial shear mechanics of corresponding assemblies. Overall, this work indicates that, despite comparable surface densities, BSA and ß-casein assemblies at liquid-liquid interfaces display almost 2 orders of magnitude difference in interfacial shear storage modulus and markedly different viscoelastic profiles. In addition, co-adsorption and sequential adsorption processes are found to further modulate interfacial shear mechanics. Beyond formulation science, the understanding of complex mixed protein assemblies and mechanics may have implications for the stability of emulsions and may underpin changes in the mechanical strength of corresponding interfaces, for example in tissue culture or in physiological conditions.
Assuntos
Caseínas , Soroalbumina Bovina , Propriedades de Superfície , Caseínas/química , Soroalbumina Bovina/química , Bovinos , Adsorção , Animais , ReologiaRESUMO
Microfabricated organ-on-a-chips are rapidly becoming the gold standard for the testing of safety and efficacy of therapeutics. A broad range of designs has emerged, but recreating microvascularised tissue models remains difficult in many cases. This is particularly relevant to mimic the systemic delivery of therapeutics, to capture the complex multi-step processes associated with trans-endothelial transport or diffusion, uptake by targeted tissues and associated metabolic response. In this report, we describe the formation of microvascularised cardiac spheroids embedded in microfluidic chips. Different protocols used for embedding spheroids within vascularised multi-compartment microfluidic chips were investigated first to identify the importance of the spheroid processing, and co-culture with pericytes on the integration of the spheroid within the microvascular networks formed. The architecture of the resulting models, the expression of cardiac and endothelial markers and the perfusion of the system was then investigated. This confirmed the excellent stability of the vascular networks formed, as well as the persistent expression of cardiomyocyte markers such as cTNT and the assembly of striated F-actin, myosin and α-actinin cytoskeletal networks typically associated with contractility and beating. The ability to retain beating over prolonged periods of time was quantified, over 25 days, demonstrating not only perfusability but also functional performance of the tissue model. Finally, as a proof-of-concept of therapeutic testing, the toxicity of one therapeutic associated with cardiac disfunction was evaluated, identifying differences between direct in vitro testing on suspended spheroids and vascularised models.
Assuntos
Técnicas de Cultura de Células , Esferoides Celulares , Técnicas de Cultura de Células/métodos , Microfluídica/métodos , Técnicas de Cocultura , Dispositivos Lab-On-A-ChipRESUMO
Advances in stem cell technologies, revolutionizing regenerative therapies and advanced in vitro testing, require novel cell manufacturing pipelines able to cope with scale up and parallelization. Microdroplet technologies, which have transformed single cell sequencing and other cell-based assays, are attractive in this context, but the inherent soft mechanics of liquid-liquid interfaces is typically thought to be incompatible with the expansion of induced pluripotent stem cells (iPSCs), and their differentiation. In this work, the design of protein nanosheets stabilizing liquid-liquid interfaces and enabling the adhesion, expansion and retention of stemness by iPSCs is reported. Microdroplet microfluidic chips are used to control the formulation of droplets with defined dimensions and size distributions. The resulting emulsions sustain high expansion rates, with excellent retention of stem cell marker expression. iPSCs cultured in such conditions retain the capacity to differentiate into cardiomyocytes. This work provides clear evidence that local nanoscale mechanics, associated with interfacial viscoelasticity, provides strong cues able to regulate and maintain pluripotency, as well as to support commitment in defined differentiation conditions. Microdroplet technologies appear as attractive candidates to transform cell manufacturing pipelines, bypassing significant hurdles paused by solid substrates and microcarriers.
RESUMO
Bone morphogenetic proteins (BMPs) are important targets to incorporate in biomaterial scaffolds to orchestrate tissue repair. Glycosaminoglycans (GAGs) such as heparin allow the capture of BMPs and their retention at the surface of biomaterials at safe concentrations. Although heparin has strong affinities for BMP2 and BMP4, two important types of growth factors regulating bone and tissue repair, it remains difficult to embed stably at the surface of a broad range of biomaterials and degrades rapidly in vitro and in vivo. In this report, biomimetic poly(sulfopropyl methacrylate) (PSPMA) brushes are proposed as sulfated GAG mimetic interfaces for the stable capture of BMPs. The growth of PSPMA brushes via a surface-initiated activator regenerated by electron transfer polymerization is investigated via ellipsometry, prior to characterization of swelling and surface chemistry via X-ray photoelectron spectroscopy and Fourier transform infrared. The capacity of PSPMA brushes to bind BMP2 and BMP4 is then characterized via surface plasmon resonance. BMP2 is found to anchor particularly stably and at high density at the surface of PSPMA brushes, and a strong impact of the brush architecture on binding capacity is observed. These results are further confirmed using a quartz crystal microbalance with dissipation monitoring, providing some insights into the mode of adsorption of BMPs at the surface of PSPMA brushes. Primary adsorption of BMP2, with relatively little infiltration, is observed on thick dense brushes, implying that this growth factor should be accessible for further binding of corresponding cell membrane receptors. Finally, to demonstrate the impact of PSPMA brushes for BMP2 capture, dermal fibroblasts were then cultured at the surface of functionalized PSPMA brushes. The presence of BMP2 and the architecture of the brush are found to have a significant impact on matrix deposition at the corresponding interfaces. Therefore, PSPMA brushes emerge as attractive coatings for scaffold engineering and stable capture of BMP2 for regenerative medicine applications.