RESUMO
Over the past decades, accumulating evidence suggests that the gut microbiome exerts a key role in Alzheimer's disease (AD). The Alzheimer's Association Workgroup is updating the diagnostic criteria for AD, which changed the profiles and categorization of biomarkers from "AT(N)" to "ATNIVS." Previously, most of studies focus on the correlation between the gut microbiome and amyloid beta deposition ("A"), the initial AD pathological feature triggering the "downstream" tauopathy and neurodegeneration. However, limited research investigated the interactions between the gut microbiome and other AD pathogenesis ("TNIVS"). In this review, we summarize current findings of the gut microbial characteristics in the whole spectrum of AD. Then, we describe the association of the gut microbiome with updated biomarker categories of AD pathogenesis. In addition, we outline the gut microbiome-related therapeutic strategies for AD. Finally, we discuss current key issues of the gut microbiome research in the AD field and future research directions. HIGHLIGHTS: The new revised criteria for Alzheimer's disease (AD) proposed by the Alzheimer's Association Workgroup have updated the profiles and categorization of biomarkers from "AT(N)" to "ATNIVS." The associations of the gut microbiome with updated biomarker categories of AD pathogenesis are described. Current findings of the gut microbial characteristics in the whole spectrum of AD are summarized. Therapeutic strategies for AD based on the gut microbiome are proposed.
Assuntos
Doença de Alzheimer , Biomarcadores , Microbioma Gastrointestinal , Doença de Alzheimer/microbiologia , Doença de Alzheimer/diagnóstico , Humanos , Microbioma Gastrointestinal/fisiologiaRESUMO
In this study, we employ first-principles calculations to explore the electronic and valleytronic properties of single-layer (SL) SMSiN2 (M = Mo, W), which are two-dimensional Janus materials with strong spin-orbit coupling. Our findings indicate that SL SMoSiN2/SWSiN2 possess a direct/indirect band gap, where the valence band maximum is situated at the K/K' point, giving rise to the formation of degenerate valleys. When considering spin-orbit coupling, SMoSiN2 and SWSiN2 demonstrate intriguing valley spin splitting in their valleys, with a maximum splitting of up to 0.14/0.39 eV in the valence bands. By implementing magnetic doping with V and Cr, we provide a demonstration that valley polarization could be realized in SL SMSiN2. Moreover, the findings reveal high carrier mobility in SL SMSiN2, notably in SWSiN2, where hole carriers can achieve a remarkable mobility of up to 7.98 × 103 cm2 V-1 s-1 along the zigzag direction. Furthermore, our observations suggest that strain can be effectively utilized to manipulate the character and magnitude of the band gap, as well as the valley spin splitting in these materials.
RESUMO
The paper proposed and verified a method of object edge detection based on the innovative defect spot working mode of the position-sensitive detector (PSD). With the output characteristics of the PSD in the defect spot mode and the size transformation properties of a focused beam, edge-detection sensitivity could be improved. Calibration experiments with the piezoelectric transducer (PZT) and object edge-detection experiments indicate that the object edge-detection sensitivity and accuracy of our method could reach 1 and 20 nm, respectively. Therefore, this method can be widely used in high-precision alignment, geometric parameters measurement, and other fields.
RESUMO
It is important to detect and classify foreign fibers in cotton, especially white and transparent foreign fibers, to produce subsequent yarn and textile quality. There are some problems in the actual cotton foreign fiber removing process, such as some foreign fibers missing inspection, low recognition accuracy of small foreign fibers, and low detection speed. A polarization imaging device of cotton foreign fiber was constructed based on the difference in optical properties and polarization characteristics between cotton fibers. An object detection and classification algorithm based on an improved YOLOv5 was proposed to achieve small foreign fiber recognition and classification. The methods were as follows: (1) The lightweight network Shufflenetv2 with the Hard-Swish activation function was used as the backbone feature extraction network to improve the detection speed and reduce the model volume. (2) The PANet network connection of YOLOv5 was modified to obtain a fine-grained feature map to improve the detection accuracy for small targets. (3) A CA attention module was added to the YOLOv5 network to increase the weight of the useful features while suppressing the weight of invalid features to improve the detection accuracy of foreign fiber targets. Moreover, we conducted ablation experiments on the improved strategy. The model volume, mAP@0.5, mAP@0.5:0.95, and FPS of the improved YOLOv5 were up to 0.75 MB, 96.9%, 59.9%, and 385 f/s, respectively, compared to YOLOv5, and the improved YOLOv5 increased by 1.03%, 7.13%, and 126.47%, respectively, which proves that the method can be applied to the vision system of an actual production line for cotton foreign fiber detection.
RESUMO
Optically pumped gas molecular terahertz (THz) lasers are promising for generating high-power and high-beam-quality coherent THz radiation. However, for pulsed gas THz lasers, the temporal behavior of the output THz pulse has rarely been investigated. In this study, the temporal behavior of a pulsed gas THz pumped by a fundamental-mode TEA CO2 laser has been presented for the first time both in simulation and experiment. A modified laser kinetics model based on the density matrix rate equation was used to simulate the temporal behavior and output pulse energy of a pulsed gas THz laser at different gas pressures. The results clearly show that the working gas pressure and pump pulse energy have critical influences on the output THz pulse shape. Three typical pulse shapes were obtained, and the THz pulse splitting caused by gain switching was quantitatively simulated and explained based on the laser dynamic process. Besides, with an incident pump pulse energy of 342 mJ, the maximum output THz pulse energy of 2.31 mJ was obtained at 385 µm, which corresponds to a photon conversion efficiency of approximately 56.1%, and to our knowledge, this is the highest efficiency for D2O gas THz laser. The experimental results agreed well with those of the numerical simulation for the entire working gas pressure range, indicating that our model is a powerful tool and paves the way for designing and optimizing high-power pulsed gas lasers.
RESUMO
A novel electrochemical biosensor was developed for the detection of epinephrine (EP) by immobilizing double-strand DNA (dsDNA) bound with copper ions on a gold electrode (Cu2+/dsDNA/MCH/AuE). The electrochemical behavior of EP at Cu2+/dsDNA/MCH/AuE was examined, and the results demonstrated a significant enhancement in the electrocatalytic oxidation peak current of EP due to the formation of a stable G-Cu(II)-G sandwich structure between Cu2+ and guanine at the modified electrode. The modification process of the electrode was characterized by scanning electron microscopy, infrared spectroscopy, electrochemical impedance spectroscopy, and differential pulse voltammetry. A study on the effect of pH in phosphate buffer solution on the electrochemical oxidation of EP indicated that the catalytic oxidation process was pH-dependent. A plot of catalytic current versus EP concentration exhibited a dual-linear relationship within two ranges: 1.0-12.5 µM and 12.5-1000.0 µM, with correlation coefficients of 0.995 and 0.997, respectively. The limit of detection was determined to be 47 nM (S/N = 3). According to the calculated Hill coefficient (0.99), it can be concluded that the electrocatalytic process followed the Michaelis-Menten kinetic mechanism. The maximum catalytic current Im was 25 µA, while the apparent Michaelis-Menten constant Km was 1.425 mM. These findings indicated excellent electrocatalytic activity of the modified electrode towards oxidation of EP. The developed biosensor successfully detected EP in spiked mouse serum as well as epinephrine hydrochloride injection with high selectivity, sensitivity, stability, and accuracy.
Assuntos
Técnicas Biossensoriais , Cobre , DNA , Técnicas Eletroquímicas , Eletrodos , Epinefrina , Ouro , Epinefrina/análise , Epinefrina/sangue , Cobre/química , Técnicas Biossensoriais/métodos , DNA/química , Técnicas Eletroquímicas/métodos , Ouro/química , Limite de Detecção , Animais , Oxirredução , Concentração de Íons de HidrogênioRESUMO
Sugar transporters play important roles in controlling carbohydrate transport and are responsible for mediating the movement of sugars into cells in numerous organisms. In insects, sugar transporters not only play a role in sugar transport but may also act as receptors for virus entry and the accumulation of plant defense compounds. The brown planthopper, Nilaparvata lugens, inflicts damage on rice plants by feeding on their phloem sap, which is rich in sugars. In the present study, we identified 34 sugar transporters in N. lugens, which were classified into three subfamilies based on phylogenetic analysis. The motif numbers varied from seven to eleven, and motifs 2, 3, and 4 were identified in the functional domains of all 34 NlST proteins. Chromosome 1 was found to possess the highest number of NlST genes, harboring 15. The gut, salivary glands, fat body, and ovary were the different tissues enriched with NlST gene expression. The expression levels of NlST2, 3, 4, 7, 20, 27, 28, and 31 were higher in the gut than in the other tissues. When expressed in a Saccharomyces cerevisiae hexose transporter deletion mutant (strain EBY.VW4000), only ApST4 (previously characterized) and NlST4, 28, and 31 were found to transport glucose and fructose, resulting in functional rescue of the yeast mutant. These results provide valuable data for further studies on sugar transporters in N. lugens and lay a foundation for finding potential targets to control N. lugens.