Proximal Row Carpectomy Versus 4-Corner Fusion: Incidence, Conversion to Fusion, and Cost.

PURPOSE: The primary objective of this study was to compare incidence, demographic trends, and rates of subsequent fusion between proximal row carpectomy (PRC) and 4-corner fusion (4CF) among patients in the United States. METHODS: A total of 3,636 patients who underwent PRC and 5,047 who underwent 4CF were identified from the years 2005 through 2014 among enrollees in the PearlDiver database. Regional distribution, demographic characteristics, annual incidence, comorbidities, and subsequent wrist fusion were compared between the 2 groups. Of the patients identified, 3,512 from each group were age- and sex-matched and subsequently compared for rates of converted fusion, 30- and 90-day readmission rates, and average direct cost. RESULTS: Patients undergoing 4CF and PRC did not have statistically significant differences in comorbidities. The incidence of the procedures among all subscribers increased for both PRC (1.8 per 10,000 to 2.6 per 10,000) and 4CF (1.2 per 10,000 to 2.0 per 10,000) from 2005 to 2014. Comparing the matched cohorts, patients who underwent 4CF had a higher rate of subsequent fusion than those who underwent PRC (2.67% vs 1.79%). Readmission rates were not significantly different at 30 or 90 days. Average direct cost was significantly greater for 4CF than for PRC. CONCLUSIONS: Both PRC and 4CF have been utilized at increasing rates in the past decade. Wrist fusion rates and average costs are higher in the 4CF group without a significant difference in readmission rates. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic III.

Evaluation of Articular Surface Similarity of Hemi-Hamate Grafts and Proximal Middle Phalanx Morphology: A 3D Geometric Morphometric Approach.

PURPOSE: Hemi-hamate arthroplasty has been described as a viable treatment option for unstable proximal interphalangeal joint fracture-dislocations. The procedure uses a dorsal distal hamate osteochondral graft to recreate the injured volar middle phalanx (MP) proximal base. The purpose of this study was to evaluate the similarity in shape of these articular surfaces using quantitative 3-dimensional methods. METHODS: Three-dimensional virtual renderings were created from laser scans of the articular surfaces of the dorsal distal hamate and the volar MP bases of the index, middle, ring, and little fingers from cadaveric hands of 25 individuals. Three-dimensional landmarks were obtained from the articular surfaces of each bone and subjected to established geometric morphometric analytical approaches to quantify shape. For each individual, bone shapes were evaluated for covariation using 2-block partial least-squares and principal component analyses. RESULTS: No statistically significant covariation was found between the dorsal distal hamate and volar MP bases of the middle, ring, or little digits. Whereas the volar MP bases demonstrated relative morphologic uniformity among the 4 digits both within and between individuals, the dorsal distal hamates exhibited notable variation in articular surface morphology. CONCLUSIONS: Despite the early to midterm clinical success of hemi-hamate arthroplasty, there is no statistically significant, uniform similarity in shape between the articular surfaces of the dorsal distal hamate and the volar MP base. In addition, there is wide variation in the articular morphology of the hamate among individuals. CLINICAL RELEVANCE: The lack of uniform similarity in shape between the dorsal distal hamate and the volar MP base may result in unpredictable outcomes in HHA. It is recommended that the variation in hamate morphology be considered while reconstructing the injured volar MP base in the procedure.

Washer and Post Augmentation of 90/90 Wiring for Proximal Interphalangeal Joint Arthrodesis: A Biomechanical Study.

PURPOSE: To describe a novel construct for proximal interphalangeal (PIP) joint arthrodesis using headless cannulated screws as an intramedullary washer to augment 90/90 intraosseous wiring and compare the biomechanical properties of this construct with those of the 90/90 intraosseous wiring without headless screw augmentation. METHODS: Biomechanical evaluation of augmented 90/90 intraosseous wiring with headless cannulated screws (group 1) or 90/90 intraosseous wiring without augmentation (group 2) for PIP joint arthrodesis was performed in 3 matched-pair cadaveric specimens (12 digits per group). Each group was loaded to 10 N in the sagittal and coronal planes and the resultant stiffness from the load-displacement curve was calculated. In extension, each group then underwent load to permanent deformation and load to catastrophic failure. RESULTS: The augmented 90/90 intraosseous wiring with cannulated screws construct demonstrated significantly greater stiffness by 132%, 64%, 79%, and 75% in flexion, extension, ulnar, and radial displacement, respectively. During load to permanent deformation testing, a 42% greater force was required to create permanent deformation in group 1 compared than group 2. There was no significant difference between the 2 groups during load to catastrophic failure testing. CONCLUSIONS: Augmenting 90/90 intraosseous wiring for PIP joint arthrodesis with 2 headless cannulated screws in the sagittal plane that serve as intramedullary washers for the sagittal wire and posts for the coronal wire significantly increases stiffness in all directions as well as load to permanent deformation compared with 90/90 intraosseous wiring without cannulated screw augmentation. CLINICAL RELEVANCE: Augmentation of the 90/90 intraosseous wire construct with headless cannulated screws can be considered in patients at risk for wire cutout or implant failure.

A Biomechanical Comparison of Distal Fixation for Bridge Plating in a Distal Radius Fracture Model.

PURPOSE: To compare the biomechanical properties of second versus third metacarpal distal fixation when using a radiocarpal spanning distraction plate in an unstable distal radius fracture model. METHODS: Biomechanical evaluation of the radiocarpal spanning distraction plate comparing second versus third metacarpal distal fixation was performed using a standardized model of an unstable wrist fracture in 10 matched-pair cadaveric specimens. Each fixation construct underwent a controlled cyclic loading protocol in flexion and extension. The resultant displacement and stiffness were calculated at the fracture site. After cyclic loading, each specimen was loaded to failure. The stiffness, maximum displacement, and load to failure were compared between the 2 groups. RESULTS: Cyclic loading in flexion demonstrated that distal fixation to the third metacarpal resulted in greater stiffness compared with the second metacarpal. There was no significant difference between the 2 groups with regards to maximum displacement at the fracture site in flexion. Cyclic loading in extension demonstrated no significant difference in stiffness or maximum displacement between the 2 groups. The average load to failure was similar for both groups. CONCLUSIONS: Fixation to the third metacarpal resulted in greater stiffness in flexion. All other biomechanical parameters were similar when comparing distal fixation to the second or third metacarpal in distal radius fractures stabilized with a spanning internal distraction plate. CLINICAL RELEVANCE: The treating surgeon should choose distal metacarpal fixation primarily based on fracture pattern, alignment, and soft tissue integrity. If a stiffer construct is desired, placement of the radiocarpal spanning plate at the third metacarpal is preferred.

Management of scaphoid nonunion with iliac crest bone graft and K-wire fixation.

PURPOSE: Scaphoid nonunion can occur in both non-operative and operatively treated scaphoid fractures. Without treatment, this can lead to a predictable pattern of carpal collapse and degenerative arthritic change and patients can experience both pain and functional loss in the early and late phases of progression. An operative technique with a high success rate for union is important. This paper describes a technique for treatment of scaphoid nonunion with K-wire fixation and iliac crest cancellous bone graft. METHODS: A retrospective review from 1996 to 2010 was performed on a single senior surgeon's private university-based practice. Patient demographic information and fracture characteristics were obtained to evaluate for influence on success and time to union. RESULTS: There were 32 patients identified for inclusion in this study. Union was achieved in 100% of the patients, including 44% that had proximal pole fractures. The median time from injury to surgery was 41.86 weeks. The median time from surgery to healing was 17.93 weeks. Time to union was not affected by patient age, fracture location, smoking, alcohol use, or time to treatment. CONCLUSION: K-wire fixation and ICBG for treatment of scaphoid nonunion using our technique have equal or superior union rates compared to other techniques in the literature. This paper highlights the keys to success using this method. LEVEL OF EVIDENCE: Therapeutic Level IV.

Distal Radius Fractures: Approaches, Indications, and Techniques.

Distal radius fractures remain among the most common fractures of the upper extremity. The indications for operative management continue to evolve based on outcomes from the most recent clinical studies. Advancements over the past decade have expanded the variety of fixation options available; however, the clinical superiority of a particular treatment modality remains without consensus. Each approach requires the use of unique surgical techniques, and the choice of a particular implant system should be based on the surgeon's familiarity with the implant design and its limitations. As our understanding of the management of distal radius fractures improves, so will our indications for each specific treatment modality.

Evaluation of Percutaneous First Annular Pulley Release: Efficacy and Complications in a Perfused Cadaveric Study.

PURPOSE: Trigger finger is the most common entrapment tendinopathy, with a lifetime risk of 2% to 3%. Open surgical release of the flexor tendon sheath is a commonly performed procedure associated with a high rate of success. Despite reported success rates of over 94%, percutaneous trigger finger release (PFTR) remains a controversial procedure because of the risk of iatrogenic digital neurovascular injury. This study aimed to evaluate the safety and efficacy of traditional percutaneous and ultrasound (US)-guided first annular (A1) pulley releases performed on a perfused cadaveric model. METHODS: First annular pulley releases were performed percutaneously using an 18-gauge needle in 155 digits (124 fingers and 31 thumbs) of un-embalmed cadavers with restored perfusion. A total of 45 digits were completed with US guidance and 110 digits were completed without it. Each digit was dissected and assessed regarding the amount of release as well as neurovascular, flexor tendon, and A2 pulley injury. RESULTS: Overall, 114 A1 pulleys were completely released (74%). There were 38 partial releases (24%) and 3 complete misses (2%). No significant flexor tendon injury was seen. Longitudinal scoring of the flexor tendon was found in 35 fingers (23%). There were no lacerations to digital nerves and one ulnar digital artery was partially lacerated (1%) in a middle finger with a partial flexion contracture that prevented appropriate hyperextension. The ultrasound-assisted and blind PTFR techniques had similar complete pulley release and injury rates. CONCLUSIONS: Both traditional and US-assisted percutaneous release of the A1 pulley can be performed for all fingers. Perfusion of cadaver digits enhances surgical simulation and evaluation of PTFR beyond those of previous cadaveric studies. The addition of vascular flow to the digits during percutaneous release allows for Doppler flow assessment of the neurovascular bundle and evaluation of vascular injury. CLINICAL RELEVANCE: Our cadaveric data align with those of published clinical investigations for percutaneous A1 pulley release.

Risk of tendon entrapment under a dorsal bridge plate in a distal radius fracture model.

PURPOSE: To determine the risk of iatrogenic damage to the extensor tendons and sensory nerves under a bridge plate along the second versus third metacarpal. METHODS: Using 6 paired (left-right) cadaver forearms-wrists and via a volar approach, we created a distal radius fracture with metaphyseal comminution. We then applied a dorsal distraction plate to either the second or third metacarpal. We next performed dorsal dissection of the hand and wrist over the zone of injury to determine the position of the plate relative to the extensor tendons and sensory nerves. RESULTS: The bridge plate on the third metacarpal entrapped tendons of the first and third compartment in all 6 specimens. When the plate was applied to the second metacarpal there were no cases of tendon entrapment. There were no instances of nerve entrapment in plating to either the second or third metacarpal. CONCLUSIONS: Distraction plating has been proposed for use in the second and third metacarpals for unstable comminuted distal radius fractures. We recommend formal exposure of the extensor tendons over the zone of injury when applying a distraction bridge plate to the third metacarpal. CLINICAL RELEVANCE: Plating to the second metacarpal decreases the risk of entrapment of extensor tendons compared with plating to the third metacarpal.

Pronator-sparing technique for volar plating of distal radius fractures.

Acute distal radius fractures are commonly treated by volar locking plate fixation and typically involve reflection of the pronator quadratus for adequate exposure of the fracture. Recently, attention has been centered on the role and repair of the pronator quadratus. This article presents an alternative approach to fixation of distal radius fractures with a pronator-sparing technique that offers similar short-term radiographic outcomes to the conventional volar plating approach.

Volar percutaneous screw fixation of the scaphoid: a cadaveric study.

PURPOSE: To test the efficacy of a previously described technique of angiocatheter-assisted instrument positioning in achieving a central screw position in a cadaveric model for volar percutaneous screw fixation (PSF) of the scaphoid and to quantify the damage to surrounding soft tissue and articular cartilage associated with the procedure. METHODS: We performed fluoroscopically guided volar PSF of the scaphoid on 10 fresh cadaveric wrists. We then dissected the specimens, analyzed screw position in cross sections of the scaphoid, and described injury to nearby soft tissue structures as well as articular cartilage of the scaphotrapezial joint. RESULTS: All 10 screws were positioned within the central third of the scaphoid on at least 2 of 3 cross sections, and 8 of 10 screws were positioned within the central third of the proximal pole. Two wrists required a transtrapezial trajectory for satisfactory screw positioning. None of the specimens sustained visible neurovascular damage, and 2 wrists revealed minor tendon damage. Trajectories involving the scaphotrapezial joint violated, on average, 7% of the scaphoid articular cartilage. With a transtrapezial trajectory, 11% of the trapezial cartilage was violated CONCLUSIONS: Central positioning of the screw is biomechanically superior, and screw position within the central one third of the proximal pole has been associated with faster time to union. Volar PSF achieved satisfactory screw position in the scaphoid. The majority of wrists were amenable to PSF via the scaphotrapezial joint, though a transtrapezial approach was a viable alternative for wrists with restrictive anatomy. Both approaches minimally disrupted the scaphotrapezial joint and surrounding soft tissues. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.

A Diagnostic Algorithm to Guide Operative Intervention of Zone 5 Flexor Injuries.

Background: Given the importance of the neurovascular structures in the volar forearm, accurate diagnosis of zone 5 flexor injuries is critical. Purpose: We sought to test the hypothesis that tendinous injury would be more likely in the distal 50% of the forearm and muscle belly injury would be more likely in the proximal 50% of the forearm. Methods: From December 2015 to December 2016, we conducted a prospective clinical study of patients 18 years and older with zone 5 flexor lacerations. We excluded those with concomitant ipsilateral injuries in flexor zones 1 to 4, multiple lacerations in flexor zone 5, prior neurovascular injuries, crush injuries, patients who underwent operative exploration prior to transfer to our facility, and patients who were unable or unwilling to provide consent. Neurovascular and musculotendinous injuries on physical examination were recorded. All patients underwent operative exploration. Physical examination accuracy and the incidence of musculotendinous and neurovascular injury in the distal 50% of the forearm were compared with the proximal 50% of the forearm. Results: The distal 50% of the forearm (group 1, n = 14) had higher probability of tendon injury (64%), whereas lacerations of the proximal 50% of the forearm (group 2, n = 5) did not result in any tendinous injuries. Rather, all patients in group 2 had muscle belly injuries. There was no difference in the rate of neurovascular injury between groups. Physical examination alone was highly accurate in diagnosing nerve injuries (93%-100%) but less accurate in diagnosing arterial injuries (79%-80%) regardless of the location of injury. Conclusions: Due to the lack of tendinous injuries in proximal zone 5 lacerations, along with the accuracy of physical examination in determining the presence of neurovascular injuries, patients with lacerations in the proximal half of the forearm, without evidence of nerve or arterial injury, can likely be observed in lieu of immediate operative exploration.

Single Versus Dual Headless Compression Screw Fixation of Scaphoid Nonunions: A Biomechanical Comparison.

BACKGROUND: Management of scaphoid nonunions with bone loss varies substantially. Commonly, internal fixation consists of a single headless compression screw. Recently, some authors have reported on the theoretical benefits of dual-screw fixation. We hypothesized that using 2 headless compression screws would impart improved stiffness over a single-screw construct. METHODS: Using a cadaveric model, we compared biomechanical characteristics of a single tapered 3.5- to 3.6-mm headless compression screw with 2 tapered 2.5- to 2.8-mm headless compression screws in a scaphoid waist nonunion model. The primary outcome measurement was construct stiffness. Secondary outcome measurements included load at 1 and 2 mm of displacement, load to failure for each specimen, and qualitative assessment of mode of failure. RESULTS: Stiffness during load to failure was not significantly different between single- and double-screw configurations (P = .8). Load to failure demonstrated no statistically significant difference between single- and double-screw configurations. Using a qualitative assessment, the double-screw construct maintained rotational stability more than the single-screw construct (P = .029). CONCLUSIONS: Single- and double-screw fixation constructs in a cadaveric scaphoid nonunion model demonstrate similar construct stiffness, load to failure, and load to 1- and 2-mm displacement. Modes of failure may differ between constructs and represent an area for further study. The theoretical benefit of dual-screw fixation should be weighed against the morphologic limitations to placing 2 screws in a scaphoid nonunion.

Forearm and Arm Tourniquet Tolerance.

BACKGROUND: In distal upper extremity surgeries, there can be a choice to use an upper arm or forearm tourniquet. This study examines discomfort and tolerance in healthy volunteers to determine whether one is more comfortable. METHODS: Forty healthy, study participants were randomized to an upper extremity laterality and site. Tourniquets were inflated to 100 mm Hg over systolic blood pressure. Participants experienced an upper arm and a forearm tourniquet sequentially. Visual analog scores (VAS) were recorded at 2-minute intervals. Time until request and VAS at tourniquet deflation were recorded. Time until the complete resolution of paresthesias was also recorded. Participants subjectively stated which tourniquet felt more comfortable. RESULTS: Tourniquets were inflated longer on the forearm than the upper arm (mean 16.1 minutes versus 12.2 minutes; P < 0.0001). VAS at tourniquet removal was not different between the sites (means 7.3 and 7.3) (P = 0.839). Time until paresthesia resolution after the tourniquet was deflated was not different (means 8.1 and 7.7 minutes) (P = 0.675). Time until paresthesia resolution was proportional to tourniquet inflation time for both sites (regression coefficient 0.41; P < 0.00001). Participants found the forearm more comfortable (95% confidence interval, 0.63 to 0.92). CONCLUSION: Forearm placement allows the tourniquet to be inflated for an average of 4 minutes longer. Forearm tourniquet is subjectively more comfortable.

Wrist-Spanning Fixation of Radiocarpal Dislocation: A Cadaveric Assessment of Ulnar Translation.

Background: Radiocarpal dislocations represent a high-energy wrist injury that can occur with or without concomitant fractures about the wrist. Poor outcomes are often due to radiocarpal instability and secondary ulnar translation. The purpose of this cadaveric study is to determine if there is any difference in the radiographic parameters in a wrist dislocation model given the different location of distal fixation. Methods: Ten paired fresh cadaver upper extremities were fluoroscopically evaluated with posterior-anterior (PA) and lateral views. We created a radiocarpal dislocation model and applied a dorsal bridge plate to either the second or third metacarpal. Repeat PA and lateral fluoroscopic views were obtained for evaluation of radial inclination, radial height, volar tilt, ulnar variance, radiolunate angle, radioscaphoid angle, scapholunate angle, radial rotation index, and four indices for ulnar translation (Taleisnik, Gilula, McMurtry, and Chamay). Results: Bridge plate application to the second metacarpal resulted in a significantly greater incidence of ulnar translation compared to the third metacarpal. Application to either metacarpal resulted in extension of the carpus relative to the radius. Conclusions: A more anatomic radiocarpal relationship was restored more often when distal fixation of the dorsal wrist-spanning bridge plate was applied to the third metacarpal. Further investigation is warranted to determine clinical relevance of these findings in conjunction with clinical and radiographic outcomes.

The management of clenched fist injuries with local anaesthesia and field sterility.

Clenched fist injury is associated with a high risk of infectious complications and is commonly managed with formal irrigation and debridement in the operating theatre. The purpose of this study was to determine outcomes associated with irrigation and debridement of clenched fist injuries under local anaesthesia using field sterility outside the operative theatre. In this single centre study, 232 patients were identified with clenched fist injury and 210 were treated with a standard protocol beginning with administration of intravenous antibiotics and then irrigation and debridement at the bedside. Primary outcome measures were the need for repeat debridement and complications. Secondary outcome measures included factors associated with the need for repeat debridement. Fifteen of the 210 patients (7%) required repeat debridement. Patients with cultures positive for gram-negative organisms had a significantly increased risk of repeat debridement. Irrigation and debridement under local anaesthesia using field sterility results in an acceptably low risk of complications or need for repeat debridement.Level of evidence: IV.

Differentiating Upper Extremity Necrotizing Soft Tissue Infection From Serious Cellulitis and Abscess.

Introduction Necrotizing soft tissue infection (NSTI) of the upper extremity (UE) is a rapidly progressing infection that requires early diagnosis and emergent treatment to decrease risks of loss of limb or life. Clinical presentation, particularly of early NSTI, can appear similar to serious cellulitis or abscess. The purpose of this study was to identify factors that are associated with NSTI rather than serious cellulitis and abscess to differentiate patients with similar clinical presentations. Methods This study uses a retrospective cohort design that compares patients ultimately diagnosed with UE NSTI versus those diagnosed with UE serious cellulitis or abscess. Cohorts were matched using the Laboratory Risk Indicators for Necrotizing Fasciitis (LRINEC) score in the setting of UE soft tissue infection. Laboratory values, vital signs, subjective symptoms, and social factors including substance abuse and domiciled status were recorded. Continuous variables were compared using the Mann-Whitney U test, whereas categorical variables were compared using the chi-squared test or the Fisher exact test (for expected values less than 5). A binary logistic regression for continuous and categorical variables was also performed. Significance was set at p<0.05. Univariate and multivariate analyses were performed. Results Multivariate statistical analysis and clinical interpretation of data identified four factors more associated with a diagnosis of NSTI than serious cellulitis or abscess: elevated lactate on hospital presentation, a patient-reported history of fever, male gender, and homelessness.  Conclusions In patients with upper extremity infections, the clinical presentation of NSTI and serious cellulitis or abscess may appear similar. In this retrospective cohort of patients matched with LRINEC scores, elevated lactate, subjective fever, male gender, and homelessness were significantly associated with NSTI rather than serious cellulitis or abscess.

Ulnocarpal-Spanning Plate Fixation as a Novel Technique for Complex Distal Ulna Fracture: A Case Report.

CASE: The patient was a 60-year-old woman with a comminuted, open distal radius and distal ulna metadiaphyseal fracture. After fixation of the distal radius, the distal ulna was unstable and crepitant with rotation and anteroposterior translation. Because of limited bone stock and poor soft tissue, we spanned the distal ulna using a wrist spanning plate. This was removed at 6 weeks postoperatively. She healed and was satisfied with her outcomes. CONCLUSION: This case describes the original use of a wrist spanning plate for a complex distal ulna fracture. Ulnocarpal-spanning plate fixation provides an alternative to traditional methods of fixation.

Review of Internal Radiocarpal Distraction Plating for Distal Radius Fracture Fixation.

Internal radiocarpal distraction plating is a versatile tool in the treatment of distal radius fractures that are not amenable to nonoperative treatment or operative fixation with standard volar or dorsal implants. Internal distraction plates may also be indicated in the setting of polytrauma or osteopenic bone. The plate functions as an internal fixator, using ligamentotaxis to restore length and alignment while providing relative stability for bony healing. The plate can be fixed to either the second or the third metacarpal, and anatomic and biomechanical studies have assessed the strengths and weaknesses of each strategy. This operative fixation technique leads to acceptable radiographic results and functional outcomes. Following fracture union, the plate is removed, and wrist range of motion is resumed.

Brachioradialis Flap With Vascularized Lateral Ulnar Collateral Ligament Reconstruction: A Case Report.

Background: Soft tissue defects about the elbow with concurrent ligamentous instability can be challenging to treat. Methods: We present a case report of a lateral elbow wound that resulted in lateral ulnar collateral ligament deficiency and posterolateral elbow instability. Results: We describe our technique of a modified brachioradialis rotational flap, in which the muscle is rotated to cover the soft tissue defect, while the vascularized brachioradialis tendon is used to simultaneously reconstruct the lateral ulnar collateral ligament. This procedure successfully restored posterolateral elbow stability at the time of wound coverage. Conclusion: Elbow soft tissue defects with associated ligamentous injuries can be treated using a modification of the brachioradialis rotational flap.