Collective Diffraction Effects in Perovskite Nanocrystal Superlattices.

ConspectusFor almost a decade now, lead halide perovskite nanocrystals have been the subject of a steadily growing number of publications, most of them regarding CsPbBr3 nanocubes. Many of these works report X-ray diffraction patterns where the first Bragg peak has an unusual shape, as if it was composed of two or more overlapping peaks. However, these peaks are too narrow to stem from a nanoparticle, and the perovskite crystal structure does not account for their formation. What is the origin of such an unusual profile, and why has it been overlooked so far? Our attempts to answer these questions led us to revisit an intriguing collective diffraction phenomenon, known for multilayer epitaxial thin films but not reported for colloidal nanocrystals before. By analogy, we call it the multilayer diffraction effect.Multilayer diffraction can be observed when a diffraction experiment is performed on nanocrystals packed with a periodic arrangement. Owing to the periodicity of the packing, the X-rays scattered by each particle interfere with those diffracted by its neighbors, creating fringes of constructive interference. Since the interfering radiation comes from nanoparticles, fringes are visible only where the particles themselves produce a signal in their diffraction pattern: for nanocrystals, this means at their Bragg peaks. Being a collective interference phenomenon, multilayer diffraction is strongly affected by the degree of order in the nanocrystal aggregate. For it to be observed, the majority of nanocrystals within the sample must abide to the stacking periodicity with minimal misplacements, a condition that is typically satisfied in self-assembled nanocrystal superlattices or stacks of colloidal nanoplatelets.A qualitative understanding of multilayer diffraction might explain why the first Bragg peak of CsPbBr3 nanocubes sometimes appears split, but leaves many other questions unanswered. For example, why is the split observed only at the first Bragg peak but not at the second? Why is it observed routinely in a variety of CsPbBr3 nanocrystals samples and not just in highly ordered superlattices? How does the morphology of particles (i.e., nanocrystals vs nanoplatelets) affect the appearance of multilayer diffraction effects? Finally, why is multilayer diffraction not observed in other popular nanocrystals such as Au and CdSe, despite the extensive investigations of their superlattices?Answering these questions requires a deeper understanding of multilayer diffraction. In what follows, we summarize our progress in rationalizing the origin of this phenomenon, at first through empirical observation and then by adapting the diffraction theory developed in the past for multilayer thin films, until we achieved a quantitative fitting of experimental diffraction patterns over extended angular ranges. By introducing the reader to the key advancements in our research, we provide answers to the questions above, we discuss what information can be extracted from patterns exhibiting collective interference effects, and we show how multilayer diffraction can provide insights into colloidal nanomaterials where other techniques struggle. Finally, with the help of literature patterns showing multilayer diffraction and simulations performed by us, we demonstrate that this collective diffraction effect is within reach for many appealing nanomaterials other than halide perovskites.

Self-Assembled Materials Based on Fully Aromatic Peptides: The Impact of Tryptophan, Tyrosine, and Dopa Residues.

Peptides are able to self-organize in structural elements including cross-ß structures. Taking advantage of this tendency, in the last decades, peptides have been scrutinized as molecular elements for the development of multivalent supramolecular architectures. In this context, different classes of peptides, also with completely aromatic sequences, were proposed. Our previous studies highlighted that the (FY)3 peptide, which alternates hydrophobic phenylalanine and more hydrophilic tyrosine residues, is able to self-assemble, thanks to the formation of both polar and apolar interfaces. It was observed that the replacement of Phe and Tyr residues with other noncoded aromatic amino acids like 2-naphthylalanine (Nal) and Dopa affects the interactions among peptides with consequences on the supramolecular organization. Herein, we have investigated the self-assembling behavior of two novel (FY)3 analogues with Trp and Dopa residues in place of the Phe and Tyr ones, respectively. Additionally, PEGylation of the N-terminus was analyzed too. The supramolecular organization, morphology, and capability to gel were evaluated using complementary techniques, including fluorescence, Fourier transform infrared spectroscopy, and scanning electron microscopy. Structural periodicities along and perpendicular to the fiber axis were detected by grazing incidence wide-angle X-ray scattering. Finally, molecular dynamics studies provided interesting insights into the atomic structure of the cross-ß that constitutes the basic motif of the assemblies formed by these novel peptide systems.

Isolation and Structure Analysis of Chitin Obtained from Different Developmental Stages of the Mulberry Silkworm (Bombyx mori).

Chitin, a ubiquitous biopolymer, holds paramount scientific and economic significance. Historically, it has been primarily isolated from marine crustaceans. However, the surge in demand for chitin and the burgeoning interest in biopolymers have necessitated the exploration of alternative sources. Among these methods, the mulberry silkworm (Bombyx mori) has emerged as a particularly intriguing prospect. To isolate chitin from Bombyx mori, a chemical extraction methodology was employed. This process involved a series of meticulously orchestrated steps, including Folch extraction, demineralization, deproteinization, and decolorization. The resultant chitin was subjected to comprehensive analysis utilizing techniques such as attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), 13C nuclear magnetic resonance (NMR) spectroscopy, and wide-angle X-ray scattering (WAXS). The obtained results allow us to conclude that the Bombyx mori represents an attractive alternative source of α-chitin.

Age-Related Properties of Aquaponics-Derived Tilapia Skin (Oreochromis niloticus): A Structural and Compositional Study.

In the last two decades, fisheries and fish industries by-products have started to be recovered for the extraction of type I collagen because of issues related to the extraction of traditional mammalian tissues. In this work, special attention has been paid to by-products from fish bred in aquaponic plants. The valorization of aquaponic fish wastes as sources of biopolymers would make the derived materials eco-friendlier and attractive in terms of profitability and cost effectiveness. Among fish species, Nile Tilapia is the second-most farmed species in the world and its skin is commonly chosen as a collagen extraction source. However, to the best of our knowledge, no studies have been carried out to investigate, in depth, the age-related differences in fish skin with the final aim of selecting the most advantageous fish size for collagen extraction. In this work, the impact of age on the structural and compositional properties of Tilapia skin was evaluated with the aim of selecting the condition that best lends itself to the extraction of type I collagen for biomedical applications, based on the known fact that the properties of the original tissue have a significant impact on those of the final product. Performed analysis showed statistically significant age-related differences. In particular, an increase in skin thickness (+110 µm) and of wavy-like collagen fiber bundle diameter (+3 µm) besides their organization variation was observed with age. Additionally, a preferred collagen molecule orientation along two specific directions was revealed, with a higher fiber orientation degree according to age. Thermal analysis registered a shift of the endothermic peak (+1.7 °C) and an increase in the enthalpy (+3.3 J/g), while mechanical properties were found to be anisotropic, with an age-dependent brittle behavior. Water (+13%) and ash (+0.6%) contents were found to be directly proportional with age, as opposed to protein (-8%) and lipid (-10%) contents. The amino acid composition revealed a decrease in the valine, leucine, isoleucine, and threonine content and an increase in proline and hydroxyproline. Lastly, fatty acids C14:0, C15:0, C16:1, C18:2n6c, C18:3n6, C18:0, C20:3n3, and C23:0 were revealed to be upregulated, while C18:1n9c was downregulated with age.

Stable CsPbBr3 Nanoclusters Feature a Disk-like Shape and a Distorted Orthorhombic Structure.

CsPbBr3 nanoclusters have been synthesized by several groups and mostly employed as single-source precursors for the synthesis of anisotropic perovskite nanostructures or perovskite-based heterostructures. Yet, a detailed characterization of such clusters is still lacking due to their high instability. In this work, we were able to stabilize CsPbBr3 nanoclusters by carefully selecting ad hoc ligands (benzoic acid together with oleylamine) to passivate their surface. The clusters have a narrow absorption peak at 400 nm, a band-edge emission peaked at 410 nm at room temperature, and their composition is identified as CsPbBr2.3. Synchrotron X-ray pair distribution function measurements indicate that the clusters exhibit a disk-like shape with a thickness smaller than 2 nm and a diameter of 13 nm, and their crystal structure is a highly distorted orthorhombic CsPbBr3. Based on small- and wide-angle X-ray scattering analyses, the clusters tend to form a two-dimensional (2D) hexagonal packing with a short-range order and a lamellar packing with a long-range order.

Colloidal Bismuth Chalcohalide Nanocrystals.

Here we present a colloidal approach to synthesize bismuth chalcohalide nanocrystals (BiEX NCs, in which E=S, Se and X=Cl, Br, I). Our method yields orthorhombic elongated BiEX NCs, with BiSCl crystallizing in a previously unknown polymorph. The BiEX NCs display a composition-dependent band gap spanning the visible spectral range and absorption coefficients exceeding 105  cm-1 . The BiEX NCs show chemical stability at standard laboratory conditions and form colloidal inks in different solvents. These features enable the solution processing of the NCs into robust solid films yielding stable photoelectrochemical current densities under solar-simulated irradiation. Overall, our versatile synthetic protocol may prove valuable in accessing colloidal metal chalcohalide nanomaterials at large and contributes to establish metal chalcohalides as a promising complement to metal chalcogenides and halides for applied nanotechnology.

The Introduction of a Cysteine Residue Modulates The Mechanical Properties of Aromatic-Based Solid Aggregates and Self-Supporting Hydrogels.

Peptide-based hydrogels, originated by multiscale self-assembling phenomenon, have been proposed as multivalent tools in different technological areas. Structural studies and molecular dynamics simulations pointed out the capability of completely aromatic peptides to gelificate if hydrophilic and hydrophobic forces are opportunely balanced. Here, the effect produced by the introduction of a Cys residue in the heteroaromatic sequence of (FY)3 and in its PEGylated variant was evaluated. The physicochemical characterization indicates that both FYFCFYF and PEG8-FYFCFYF are able to self-assemble in supramolecular nanostructures whose basic cross-ß motif resembles the one detected in the ancestor (FY)3 assemblies. However, gelification occurs only for FYFCFYF at a concentration of 1.5 wt%. After cross-linking of cysteine residues, the hydrogel undergoes to an improvement of the rigidity compared to the parent (FY)3 assemblies as suggested by the storage modulus (G') that increases from 970 to 3360 Pa. The mechanical properties of FYFCFYF are compatible with its potential application in bone tissue regeneration. Moreover, the avalaibility of a Cys residue in the middle of the peptide sequence could allow the hydrogel derivatization with targeting moieties or with biologically relevant molecules.

Electrochromic evaluation of airbrushed water-dispersible W18O49nanorods obtained by microwave-assisted synthesis.

Motivated by the technological relevance of tungsten oxide nanostructures as valuable materials for energy saving technology, electrochemical and electrochromic characteristics of greener processed nanostructured W18O49-based electrodes are discussed in this work. For the purpose, microwave-assisted water-dispersible W18O49nanorods have been synthesized and processed into nanostructured electrodes. An airbrushing technique has been adopted as a cost-effective large-area scalable methodology to deposit the W18O49nanorods onto conductive glass. This approach preserves the morphological and crystallographic habit of native nanorods and allows highly homogeneous transparent coating where good electronic coupling between nanowires is ensured by a mild thermal treatment (250 °C, 30 min). Morphological and structural characteristics of active material were investigated from the synthesis to the nanocrystal deposition process by transmission and scanning electron microscopy, x-ray diffraction, atomic force microscopy and Raman spectroscopy. The as-obtained nanostructured film exhibited good reversible electrochemical features through several intercalation-deintercalation cycles. The electrochromic properties were evaluated on the basis of spectro-electrochemical measurements and showed significant optical contrast in the near-infrared region and high coloration efficiency at 550 nm.

Nanocrystals of Lead Chalcohalides: A Series of Kinetically Trapped Metastable Nanostructures.

We report the colloidal synthesis of a series of surfactant-stabilized lead chalcohalide nanocrystals. Our work is mainly focused on Pb4S3Br2, a chalcohalide phase unknown to date that does not belong to the ambient-pressure PbS-PbBr2 phase diagram. The Pb4S3Br2 nanocrystals herein feature a remarkably narrow size distribution (with a size dispersion as low as 5%), a good size tunability (from 7 to ∼30 nm), an indirect bandgap, photoconductivity (responsivity = 4 ± 1 mA/W), and stability for months in air. A crystal structure is proposed for this new material by combining the information from 3D electron diffraction and electron tomography of a single nanocrystal, X-ray powder diffraction, and density functional theory calculations. Such a structure is closely related to that of the recently discovered high-pressure chalcohalide Pb4S3I2 phase, and indeed we were able to extend our synthesis scheme to Pb4S3I2 colloidal nanocrystals, whose structure matches the one that has been published for the bulk. Finally, we could also prepare nanocrystals of Pb3S2Cl2, which proved to be a structural analogue of the recently reported bulk Pb3Se2Br2 phase. It is remarkable that one high-pressure structure (for Pb4S3I2) and two metastable structures that had not yet been reported (for Pb4S3Br2 and Pb3S2Cl2) can be prepared on the nanoscale by wet-chemical approaches. This highlights the important role of colloidal chemistry in the discovery of new materials and motivates further exploration into metal chalcohalide nanocrystals.

Bi-functional peptide-based 3D hydrogel-scaffolds.

Over the last few years, hydrogels have been proposed for many biomedical applications, including drug delivery systems and scaffolds for tissue engineering. In particular, peptides have been envisioned as excellent candidates for the development of hydrogel materials, due to their intrinsic biocompatibility, ease of handling, and intrinsic biodegradability. Recently, we developed a novel hybrid polymer-peptide conjugate, PEG8-(FY)3, which is able to self-assemble into a self-supporting soft hydrogel over dry and wet surfaces as demonstrated by molecular dynamics simulation. Here, we describe the synthesis and supramolecular organization of six novel hexapeptides rationally designed by punctual chemical modification of the primary peptide sequence of the ancestor peptide (FY)3. Non-coded amino acids were incorporated by replacing the phenylalanine residue with naphthylalanine (Nal) and tyrosine with dopamine (Dopa). We also studied the effect of the modification of the side chain and the corresponding PEGylated peptide analogues, on the structural and mechanical properties of the hydrogel. Secondary structure, morphology and rheological properties of all the peptide-based materials were assessed by various biophysical tools. The in vitro biocompatibility of the supramolecular nanostructures was also evaluated on fibroblast cell lines. We conclude that the PEG8-(Nal-Dopa)3 hydrogel possesses the right properties to serve as a scaffold and support cell growth.

PbS Quantum Dots Decorating TiO2 Nanocrystals: Synthesis, Topology, and Optical Properties of the Colloidal Hybrid Architecture.

Fabrication of heterostructures by merging two or more materials in a single object. The domains at the nanoscale represent a viable strategy to purposely address materials' properties for applications in several fields such as catalysis, biomedicine, and energy conversion. In this case, solution-phase seeded growth and the hot-injection method are ingeniously combined to fabricate TiO2/PbS heterostructures. The interest in such hybrid nanostructures arises from their absorption properties that make them advantageous candidates as solar cell materials for more efficient solar light harvesting and improved light conversion. Due to the strong lattice mismatch between TiO2 and PbS, the yield of the hybrid structure and the control over its properties are challenging. In this study, a systematic investigation of the heterostructure synthesis as a function of the experimental conditions (such as seeds' surface chemistry, reaction temperature, and precursor concentration), its topology, structural properties, and optical properties are carried out. The morphological and chemical characterizations confirm the formation of small dots of PbS by decorating the oleylamine surface capped TiO2 nanocrystals under temperature control. Remarkably, structural characterization points out that the formation of heterostructures is accompanied by modification of the crystallinity of the TiO2 domain, which is mainly ascribed to lattice distortion. This result is also confirmed by photoluminescence spectroscopy, which shows intense emission in the visible range. This originated from self-trapped excitons, defects, and trap emissive states.

Fluorescence and Morphology of Self-Assembled Nucleobases and Their Diphenylalanine Hybrid Aggregates.

Studies carried out in recent decades have revealed that the ability to self-assemble is a widespread property among biomolecules. Small nucleic acid moieties or very short peptides are able to generate intricate assemblies endowed with remarkable structural and spectroscopic properties. Herein, the structural/spectroscopic characterization of aggregates formed by nucleobases and peptide nucleic acid (PNA)-peptide conjugates are reported. At high concentration, all studied nucleobases form aggregates characterized by previously unreported fluorescence properties. The conjugation of these bases, as PNA derivatives, to the dipeptide Phe-Phe leads to the formation of novel hybrid assemblies, which are characterized by an amyloid-like association of the monomers. Although these compounds share the same basic cross-ß motif, the nature and number of PNA units have an important impact on both the level of structural order and the intrinsic fluorescence of the self-assembled nanostructure.

Fmoc-FF and hexapeptide-based multicomponent hydrogels as scaffold materials.

Short peptides or single amino acids are interesting building blocks for fabrication of hydrogels, frequently used as extracellular matrix-mimicking scaffolds for cell growth in tissue engineering. The combination of two or more peptide hydrogelators could allow obtaining different materials exhibiting new architectures, tunable mechanical properties, high stability and improved biofunctionality. Here we report on the synthesis, formulation and multi-scale characterization of peptide-based mixed hydrogels formed by the low molecular weight Fmoc-FF (Nα-fluorenylmethyloxycarbonyl diphenylalanine) hydrogelator and of the PEG8-(FY)3 hexapeptide, containing three repetitions of the Phe-Tyr motif and a PEG moiety at its N-terminus. Mixed hydrogels were also prepared by replacing PEG8-(FY)3 with its analogue (FY)3, without the PEG moiety. Rheology analysis confirmed the improved mechanical features of the multicomponent gels prepared at two different ratios (2/1 or 1/1, v/v). However, the presence of the hydrophilic PEG polymeric moiety causes a slowing down of the gel kinetic formation (from 42 to 18 minutes) and a decrease of the gel rigidity (G' from 9 to 6 kPa). Preliminary in vitro biocompatibility and cell adhesion assays performed on Chinese hamster ovarian (CHO) cells suggest a potential employment of these multicomponent hydrogels as exogenous scaffold materials for tissue engineering.

Amyloid-Like Fibrillary Morphology Originated by Tyrosine-Containing Aromatic Hexapeptides.

Phenylalanine-based nanostructures have attracted the attention of the material science community for their functional properties. These properties strongly depend on the hierarchic organization of the nanostructure that in turn can be finely tuned by punctual chemical modifications of the building blocks. Herein, we investigate how the partial or the complete replacement of the Phe residues in PEG8 -(Phe)6 (PEG8 -F6) with tyrosines to generate PEG8 -(Phe-Tyr)3 (PEG8 -(FY)3) or PEG8 -(Tyr)6 (PEG8 -Y6) affects the structural/functional properties of the nanomaterial formed by the parental compound. Moreover, the effect of the PEG derivatization was evaluated through the characterization of the peptides without the PEG moiety (Tyr)6 (Y6) and (Phe-Tyr)3 ((FY)3). Both PEG8 -Y6 and PEG8 -(FY)3 can self-assemble in water at micromolar concentrations in ß-sheet-rich nanostructures. However, WAXS diffraction patterns of these compounds present significant differences. PEG8 -(FY)3 shows a 2D WAXS oriented fiber diffraction profile characterized by the concomitant presence of a 4.7 Šmeridional and a 12.5 Šequatorial reflection that are generally associated with cross-ß structure. On the other hand, the pattern of PEG8 -Y6 is characterized by the presence of circles typically observed in the presence of PEG crystallization. Molecular modeling and dynamics provide an atomic structural model of the peptide spine of these compounds that is in good agreement with WAXS experimental data. Gelation phenomenon was only detected for PEG8 -(FY)3 above a concentration of 1.0 wt % as confirmed by storage (G'≈100 Pa) and loss (G''≈28 Pa) moduli in rheological studies. The cell viability on CHO cells of this soft hydrogel was certified to be 90 % after 24 hours of incubation.

Structural Characterization of Self-Assembled Tetra-Tryptophan Based Nanostructures: Variations on a Common Theme.

Over the years, a large number of multidisciplinary investigations has unveiled that the self-assembly of short peptides and even of individual amino acids can generate a variety of different biomaterials. In this framework, we have recently reported that polyethylene glycol (PEG) conjugates of short homopeptides, containing aromatic amino acids such as phenylalanine (Phe, F) and naphthylalanine (Nal), are able to form elongated fibrillary aggregates having interesting chemical and physical properties. We here extend these analyses characterizing the self-assembling propensity of PEG6 -W4, a PEG adduct of the tetra-tryptophan (W4) sequence. A comprehensive structural characterization of PEG6 -W4 was obtained, both in solution and at the solid state, through the combination of spectroscopic, microscopic, X-ray scattering and computational techniques. Collectively, these studies demonstrate that this peptide is able to self-assemble in fibrillary networks characterized by a cross ß-structure spine. The present findings clearly demonstrate that aromatic residues display a general propensity to induce self-aggregation phenomenon, despite the significant differences in the physicochemical properties of their side chains.

Assembly modes of hexaphenylalanine variants as function of the charge states of their terminal ends.

The ability of peptides to self-assemble represents a valuable tool for the development of biomaterials of biotechnological and/or biomedical interest. Diphenylalanine homodimer (FF) and its analogues are among the most promising systems in this field. The longest Phe-based building block hitherto characterized is pentaphenylalanine (F5). We studied the aggregation propensity and the structural/morphological features of assemblies of zwitterionic hexaphenylalanine H+-F6-O- and of three variants characterized by different charged states of the terminal ends (Ac-F6-Amide, H+-F6-Amide and Ac-F6-O-). As previously observed for PEGylated hexaphenylalanine (PEG8-F6), all F6 variants show a strong tendency to form ß-rich assemblies in which the structural motif is constituted by antiparallel ß-strands in the cross-ß framework. Extensive replica exchange molecular dynamics simulations carried out on a pairs of F6 peptides indicate that the antiparallel ß-structure of the final assemblies is likely dictated by the preferred association modes of the individual chains in the very early stages of the aggregation process. Our data suggest that even very small F6 peptides are properly pre-organized and prone to the build-up of the final assembly.

Room-temperature processed films of colloidal carved rod-shaped nanocrystals of reduced tungsten oxide as interlayers for perovskite solar cells.

Thanks to their high stability, good optoelectronic and extraordinary electrochromic properties, tungsten oxides are among the most valuable yet underexploited materials for energy conversion applications. Herein, colloidal one-dimensional carved nanocrystals of reduced tungsten trioxide (WO3-x) are successfully integrated, for the first time, as a hole-transporting layer (HTL) into CH3NH3PbI3 perovskite solar cells with a planar inverted device architecture. Importantly, the use of such preformed nanocrystals guarantees the facile solution-cast-only deposition of a homogeneous WO3-x thin film at room temperature, allowing achievement of the highest power conversion efficiency ever reported for perovskite solar cells incorporating raw and un-doped tungsten oxide based HTL.

Colloidal Monolayer ß-In2Se3 Nanosheets with High Photoresponsivity.

We report a low-temperature colloidal synthesis of single-layer, five-atom-thick, ß-In2Se3 nanosheets with lateral sizes tunable from ∼300 to ∼900 nm, using short aminonitriles (dicyandiamide or cyanamide) as shape controlling agents. The phase and the monolayer nature of the nanosheets were ascertained by analyzing the intensity ratio between two diffraction peaks from two-dimensional slabs of the various phases, determined by diffraction simulations. These findings were further backed-up by comparing and fitting the experimental X-ray diffraction pattern with Debye formula simulated patterns and with side-view high-resolution transmission electron microscopy imaging and simulation. The ß-In2Se3 nanosheets were found to be indirect band gap semiconductors (Eg = 1.55 eV), and single nanosheet photodetectors demonstrated high photoresponsivity and fast response times.

Insights into amyloid-like aggregation of H2 region of the C-terminal domain of nucleophosmin.

Nucleophosmin (NPM1) is a multifunctional protein involved in a variety of biological processes including the pathogenesis of several human malignancies and is the most frequently mutated gene in Acute Myeloid Leukemia (AML). To deepen the role of protein regions in its biological activities, lately we reported on the structural behavior of dissected C-terminal domain (CTD) helical fragments. Unexpectedly the H2 (residues 264-277) and H3 AML-mutated regions showed a remarkable tendency to form amyloid-like assemblies with fibrillar morphology and ß-sheet structure that resulted as toxic when exposed to human neuroblastoma cells. More recently NPM1 was found to be highly expressed and toxic in neurons of mouse models of Huntington's disease (HD). Here we investigate the role of each residue in the ß-strand aggregation process of H2 region of NPM1 by performing a systematic alanine scan of its sequence and structural and kinetic analyses of aggregation of derived peptides by means of Circular Dichorism (CD) and Thioflavin T (Th-T) assay. These solution state investigations pointed out the crucial role exerted by the basic amyloidogenic stretch of H2 (264-271) and to shed light on the initial and main interactions involved in fibril formation we performed studies on fibrils deriving from the related Ala peptides through the analysis of fibrils with birefringence of polarized optical microscopy and wide-angle X-ray scattering (WAXS). This analysis suggested that the presence of branched Ile269 conferred preferential packing patterns that, instead, appeared geometrically hampered by the aromatic side-chain of Phe268. Present investigations could be useful to deepen the knowledge of AML molecular mechanisms and the role of cytoplasmatic aggregates of NPM1c+.

Photoluminescent Peptide-Based Nanostructures as FRET Donor for Fluorophore Dye.

A great interest has been recently generated by the discovery that peptide-based nanostructures (NSs) endowed with cross-ß structure may show interesting photoluminescent (PL) properties. It was shown that NSs formed by PEGylated hexaphenylalanine (PEG8 -F6, PEG=polyethylene glycol) are able to emit at 460 nm when excited at 370 or 410 nm. Here, the possibility to transfer the fluorescence of these PEG8 -F6-based NSs by foster resonance electron transfer (FRET) phenomenon to a fluorescent dye was explored. To achieve this aim, the 4-chloro-7-nitrobenzofurazan (NBD) dye was encapsulated in these NSs. Structural data in solution and in solid state, obtained by a variety of techniques (circular dichroism, Fourier-transform infrared spectroscopy, wide-angle X-ray scattering, and small-angle X-ray scattering), indicated that the organization of the peptide spine of PEG8 -F6 NS, which consists of anti-parallel ß-sheets separated by a dry interface made of interacting phenylalanine side chains, was maintained upon NBD encapsulation. The spectroscopic characterization of these NSs clearly showed a red-shift of the emission fluorescence peak both in solution and in solid state. This shift from 460 to 530 nm indicated that a FRET phenomenon from the peptide-based to the fluorophore-encapsulated NS occurred. FRET could also be detected in the PEG8 -F6 conjugate, in which the NBD was covalently bound to the amine of the compound. On the basis of these results, it is suggested that the red-shift of the intrinsic PL of NSs may be exploited in the bio-imaging field.