Hot carrier dynamics in metalated porphyrin-naphthalimide thin films.

This study employs femtosecond transient absorption spectroscopy to investigate the rapid dynamics of excited state carriers in three metalated porphyrin-naphthalimide (PN) molecules and one free-base molecule. The dynamics of electron injection, from PN to mesoporous titania (TiO2), in PN adsorbed TiO2 films (Ti-PN), were carefully investigated and compared to PN adsorbed ZrO2 films (Zr-PN). In addition, we examined the self-assembled PN films and found that, in their self-assembled state, these molecules exhibited a longer relaxation time than Zr-PN monomeric films, where the charge injection channel was insignificant. The ground-state bleach band in the Ti-PN films gradually shifted to longer wavelengths, indicating the occurrence of the Stark effect. Faster electron injection was observed for the metalated PN systems and the electron injection times from the various excited states to the conduction band of TiO2 (CB-TiO2) were obtained from the target model analysis of the transient absorption spectra data matrix. In these metal-organic complexes, hot electron injection from PN to CB-TiO2 occurred on a time scale of <360 fs. Importantly, Cu(II)-based PN complexes exhibited faster injection and longer recombination times. The injection times have been estimated to result from a locally excited state at ≈280 fs, a hot singlet excited state at 4.95 ps, and a vibrationally relaxed singlet excited state at 97.88 ps. The critical photophysical and charge injection processes seen here provide the potential for exploring the underlying factors involved and how they correlate with photocatalytic performance.

Excited Charge Separation in a π-Interacting Phenothiazine-Zinc Porphyrin-Fullerene Donor-Acceptor Conjugate.

We have designed, synthesized, and characterized a donor-acceptor triad, SPS-PPY-C60, that consists of a π-interacting phenothiazine-linked porphyrin as a donor and sensitizer and fullerene as an acceptor to seek charge separation upon photoexcitation. The optical absorption spectrum revealed red-shifted Soret and Q-bands of porphyrin due to charge transfer-type interactions involving the two ethynyl bridges carrying electron-rich and electron-poor substituents. The redox properties suggested that the phenothiazine-porphyrin part of the molecule is easier to oxidize and the fullerene part is easier to reduce. DFT calculations supported the redox properties wherein the electron density of the highest molecular orbital (HOMO) was distributed over the donor phenothiazine-porphyrin entity while the lowest unoccupied molecular orbital (LUMO) was distributed over the fullerene acceptor. TD-DFT studies suggested the involvement of both the S2 and S1 states in the charge transfer process. The steady-state emission spectrum, when excited either at porphyrin Soret or visible band absorption maxima, revealed quenched emission both in nonpolar and polar solvents, suggesting the occurrence of excited state events. Finally, femtosecond transient absorption spectral studies were performed to witness the charge separation by utilizing solvents of different polarities. The transient data was further analyzed by GloTarAn by fitting the data with appropriate models to describe photochemical events. From this, the average lifetime of the charge-separated state calculated was found to be 169 ps in benzonitrile, 319 ps in dichlorobenzene, 1.7 ns in toluene for Soret band excitation, and ∼320 ps for Q-band excitation in benzonitrile.

Phenothiazine functionalized fulleropyrrolidines: synthesis, charge transport and applications to organic solar cells.

A series of phenothiazine-C60/70 dyads containing fulleropyrrolidine tethered to C-3 position (C60-PTZ and C70-PTZ) or to the heteroatom N-position via either phenyl (C60-Ph-PTZ and C70-Ph-PTZ) or phenoxyethyl linkers (C60-PhOEt-PTZ and C70-PhOEt-PTZ) of the phenothiazine were synthesized and light-induced electron transfer events were explored. Optimized studies suggested that the highest molecular orbital (HOMO) resides on donor phenothiazine moiety while lowest molecular orbital (LUMO) on the acceptor fulleropyrrolidine moiety of the dyads. Optical and electrochemical properties suggested no electronic communication between the donor and acceptor moieties in the ground state. However, steady-state emission studies in solvents of varied polarity, involving selective excitation of C60/C70, disclosed that the emission intensity of C60/C70 was quenched in the dyads in the increasing order, C60/70-PTZ > C60/70-Ph-PTZ > C60/70-PhOEt-PTZ as a consequence of the donor-acceptor distance resulted due to spacer lengths. Also, the emission quenching is more pronounced in polar solvents such as DMF compared to a non-polar solvent, toluene. With the support of parallel electrochemical studies, the emission quenching is attributed to intramolecular photo-induced electron transfer occurring from PTZ to (C60/C70)* generating a radical ion pair, PTZ+⋅-C60-⋅/PTZ+⋅-C70-⋅. Finally, bulk heterojunction (BHJ) solar cells devices inverted fashion prepared by employing the dyads as acceptors, and PTB7 as donor, suggested that the devices prepared from C70 derivatives i.e., PTB7:C70-PTZ and PTB7:C70-PhOEt-PTZ exhibited better power conversion efficiency of 2.66% and 2.15%, respectively over C60 derivatives i.e., PTB7:C60-PTZ and PTB7:C60-PhOEt-PTZ with the efficiencies of 1.80 and 1.72%, respectively. AFM studies revealed that the poor performance of PTB7:C60-PTZ- and PTB7:C60-PhOEt-PTZ-based devices can be ascribed to the lower solubility of the dyads in 1,2-DCB solvent leading to rough morphology.

2H-Pyrano[3,2-c]chromene-2,5(6H)-diones: Synthesis, Characterization, Photophysical and Redox Studies for Potential Optoelectronic Applications.

Herein, we report the preparation of 2H-pyrano[3,2-c]chromene-2,5(6H)-diones 3a-x by reacting 4-hydroxycoumarins 1a-b with Baylis-Hillman adducts 2a-w having electron releasing or electron withdrawing groups on benzyl ring of the pyranochromene moiety and study of their photophysical properties. The study of optical and electrochemical properties of the prepared compounds reveals that the electron releasing and electron withdrawing groups has not much impact on ground and excited state electronic behavior on pyranochromene moiety. The density functional theory suggests the highest occupied molecular orbital and lowest unoccupied molecular orbitals spread on coumarin moiety of pyranochromene unit. Further, these compounds are thermally stable (up to 200 °C) and lead to blue or green emission that should facilitate the development of organic light emitting diodes (OLEDs).

Intramolecular Photoinduced Energy and Electron Transfer Reactions in Phenanthroimidazole-Boron Dipyromethane Donor-Acceptor Dyads.

Donor-acceptor systems in which a donor phenanthroimidazole (PhI) is directly connected to a BODIPY acceptor (Dyad1) and separated by an ethynyl bridge between PhI and BODIPY (Dyad2) have been designed, synthesized, and characterized by various spectroscopic and electrochemical techniques. Optical absorption and 1H NMR characteristics of both dyads with those of constituent individuals suggest that there exists a minimum π-π interaction between phenanthroimidazole and BODIPY. Quenched emission of both the dyads was observed when excited either at phenthaoimidazole absorption maxima or at BODIPY absorption maxima in all three investigated solvents. The detailed spectral analysis provided evidence for an intramolecular photoinduced excitation energy transfer (PEnT) from the singlet excited state of phenanthroimidazole to BODIPY and photoinduced electron transfer (PET) from the ground state of phenanthroimidazole to BODIPY. Transient absorption studies suggest that charge-separated species (PhI•+ - BODIPY•-) are generated at a rate constant of (1.16 ± 0.01) × 108 s-1 for the dyads Dyad1 and (5.15 ± 0.03) × 108 s-1 and for Dyad2 whereas energy transfer rate constants were much higher and were on the order of (1.1 ± 0.02) × 1010 s-1 and (1.6 ± 0.02) × 1010 s-1 for Dyad1 and Dyad2, respectively, signifying their usefulness in light energy harvesting applications.

π-Conjugated Materials Derived From Boron-Chalcogenophene Combination. A Brief Description of Synthetic Routes and Optoelectronic Applications.

Functional materials composed of Boron-chalcogenophene conjugates have emerged as promising ensemble featuring commendable optoelectronic properties. This review describes the categories, synthetic routes and optoelectronic applications of a range of boron-chalcogenophene conjugates. Conjugation and linking of different types of tri- and tetra-coordinated boron moieties with chalcogenophenes have remained an important strategy for constructing a range of functional materials. Synthetic protocols have been devised to efficiently prepare such chemically robust conjugates, often exhibiting a myriad of photophysical properties, redox capabilities and also solid-state behaviors. Tin-boron and silicon-boron exchange protocols have been efficiently adapted to access these boron-chalcogenophenes. Few other commonly used methods namely, hydroboration of alkynes as well as electrophilic borylations are also mentioned. The chemical and electronic properties of such boron-chalcogenophene conjugates are directly influenced by the strong Lewis acid character of trivalent boranes which can further alter the intra- and inter- molecular Lewis acid-base interactions. Apart from the synthetic protocols, recent advances in the application of these boron-chalcogenophene conjugates towards analyte sensing, organic electronics, molecular switches and several other aspects will be discussed in this review.

Phenothiazine functional materials for organic optoelectronic applications.

Phenothiazine (PTZ) is one of the most extensively investigated S, N heterocyclic aromatic hydrocarbons due to its unique optical, electronic properties, flexibility of functionalization, low cost, and commercial availability. Hence, PTZ and its derivative materials have been attractive in various optoelectronic applications in the last few years. In this prospective, we have focused on the most significant characteristics of PTZ and highlighted how the structural modifications such as different electron donors or acceptors, length of the π-conjugated system or spacers, polar or non-polar chains, and other functional groups influence the optoelectronic properties. This prospective provides a recent account of the advances in phenothiazine derivative materials as an active layer(s) for optoelectronic (viz. dye sensitized solar cells (DSSCs), perovskite solar cells (PSCs), organic solar cells (OSCs), organic light-emitting diodes (OLEDs), organic field-effect transistor (OFETs), chemosensing, nonlinear optical materials (NLOs), and supramolecular self-assembly applications. Finally, future prospects are discussed based on the structure-property relationship in PTZ-derivative materials. This overview will pave the way for researchers to design and develop new PTZ-functionalized structures and use them for various organic optoelectronic applications.

Recent Progress and Emerging Applications of Rare Earth Doped Phosphor Materials for Dye-Sensitized and Perovskite Solar Cells: A Review.

Although the efficiency of Dye-sensitized and Perovskite solar cell is still below the performance level of market dominance silicon solar cells, in last few years they have grabbed significant attention because of their fabrication ease using low-cost materials, and henceforth these cells are considered as a promising alternative to commercial photovoltaic devices. However, third generation solar cells have significant absorption in the visible region of solar spectrum, which confines their power conversion efficiency. Subsequently, the performance of current photovoltaics is significantly hampered by the transmission loss of sub-band-gap photons. To overcome these issues, rare earth doped luminescent materials is the favorable route followed to convert these transmitted sub-band-gap photons into above-band-gap light, where solar cells typically have significant light-scattering effects. Moreover, the rare earth based down/up conversion material facilitates the improvement in sensitization, light-scattering and device stability of these devices. This review provides insight into the application of various down/up conversion materials for Dye-sensitized and perovskite solar cell applications. Additionally, the paper discusses the techniques to improve the photovoltaic performance in terms of current density and photo voltage in detail.

Excitation-Wavelength-Dependent Light-Induced Electron Transfer and Twisted Intramolecular Charge Transfer in N,N-Bis(4'-tert-butylbiphenyl-4-yl)aniline Functionalized Borondipyrromethenes.

A series of bis(4'-tert-butylbiphenyl-4-yl)aniline (BBA) functionalized borondipyrromethene (BODIPY) dyads, Dyads 1-3, containing the BBA group tethered to BODIPY moiety either directly or through a phenyl or alkynyl phenyl spacers are synthesized, and the light-mediated charge transfer within the chromophores has been systematically investigated. The crystal structure of Dyad-1 showed a tilt of 44.2° between the BODIPY and BBA molecular planes and intermolecular C-H···π interactions with these moieties. Cyclic voltammetric and computational studies showed that the BBA moiety can act as the electron donor (D) and BODIPY as the electron acceptor (A) and the optical absorption studies revealed that an increase in the conjugation of the linker from Dyad-1 to Dyad-2 resulted in bathochromic shifts. Steady-state fluorescence studies involving photoexcitation of the BBA moiety at 326 nm resulted in the decrease in fluorescence intensity of the BBA, indicating the possibility of sequential occurrence of faster photoinduced energy transfer (PEnT) followed by the photoinduced electron transfer (PET) or solely PET within the dyads, and the driving forces of the charge separation were calculated to be exothermic in all of the employed solvents. Parallel time-resolved fluorescence experiments involving the excitation of BBA moiety also supported the occurrence of charge separation in these dyads. Interestingly, excitation of the BODIPY moiety of Dyad-1 and Dyad-2 at 490 nm in solvents of increasing polarity leads to a red-shifted BODIPY emission with weakened intensity. This spectral behavior indicated the occurrence of emission from the locally excited (LE) state in nonpolar solvents, whereas formation of an LE state followed by the rotation of the chromophores at the D-A bond leads to a low energy twisted intramolecular charge transfer state (TICT), resulting in a charge-separated state BBA+•-BODIPY-• in polar solvents. Furthermore, the hydrophobicity studies involving the solutions of dyads in admixtures of polar tetrahydrofuran (THF) and nonpolar hexanes revealed that when the fraction of hexanes in these mixtures is increased, the emission of BODIPY moiety was observed to be blue-shifted and exhibited enhanced intensity supporting the occurrence of TICT in these dyads.

Metallated Macrocyclic Derivatives as a Hole - Transporting Materials for Perovskite Solar Cells.

Spiro-OMeTAD is widely used as thehole-transporting material (HTM) in perovskite solar cells (PSC), which extracts positive charges and protects the perovskite materials from metal electrode, setting a new world-record efficiency of more than 20 %. Spiro-OMeTAD layer engross moisture leading to the degradation of perovskite, and therefore, has poor air stability. It is also expensive therefore limiting scale-up, so macrocyclic metal complex derivatives (MMDs) could be a suitable replacement. Our review covers low-cost, high yield hydrophobic materials with minimal steps required for synthesis of efficient HTMs for planar/mesostructured PSCs. The MMDs based devices demonstrated PCEs around 19 % and showed stability for a longer duration, indicating that MMDs are a promising alternative to spiro-OMeTAD and also easy to scale-up via solution approach. Additionally, this review describes how optical and electrical properties of MMDs change with chemical structure, allowing for the design of novel hole-mobility materials to achieve negligible hysteresis and act as effective functional barriers against moisture which results in a significant increase in the stability of the device. We provide an overview of the apt green-synthesis, characterization, stability and implementation of the various classes of macrocyclic metal complex derivatives as HTM for photovoltaic applications.

Stipulating Low Production Cost Solar Cells All Set to Retail !

Today's solar cells are exceptionally in demand whilst excess exploitation of natural fossil fuels. In this context, the first and second generation solar cells commercially available in market for more than decades however limitations in production cost and large-scale applications insist to generate inexpensive materials for fabrication. Thereby, organic materials based solar cells explored and emerging as third generation solar cells which possess flexibility, low cost and large-scale applications. For example, organic photovoltaics, dye sensitized solar cells and perovskite (organic-inorganic) solar cells (PSCs) are considered third generation solar cells wherein PSCs reached the record power conversion efficiency (PCE ∼23 %) and durability assists great advantages for commercialization in near future. Moreover, we reported various global renowned companies involved producing the modules and materials for three generation solar cells, hence, majority of companies considered commercialization of perovskite based solar cells assist low cost photovoltaics to meet the current energy necessities and environmental safety.

Metal-free propargylation/aza-annulation approach to substituted ß-carbolines and evaluation of their photophysical properties.

An efficient acid-catalyzed propargylation/aza-annulation sequence was developed under metal-free reaction conditions, thus leading to a one-pot synthesis of a variety of substituted ß-carbolines starting from propargylic alcohols and indole 2-carbonyls. This versatile strategy was further extended to the synthesis of 5-azaindoles and 5-azabenzothiazoles. Optical properties suggested that manipulation of electron donor and acceptor moieties on ß-carbolines has an impact on their ground and excited state electronic behavior. This leads to blue or green emission and should facilitate the development of organic light emitting diodes (OLEDs). Electrochemical and stability studies revealed that 4a-6 shows ease of redox activity and photostability during illumination.

Novel Amphiphilic G-Quadruplex Binding Synthetic Derivative of TMPyP4 and Its Effect on Cancer Cell Proliferation and Apoptosis Induction.

Porphyrins are well-known anticancer agents because of their high binding affinity for G-quadruplex DNA and excellent photophysical properties. Several studies carried out using TMPyP4 established it as an efficient chemotherapeutic and a photodynamic therapeutic (PDT) agent, but its use as a lead molecule has been restricted because of its high level of binding to double-stranded DNA (dsDNA), which may have side effects on normal cells and tissues. To minimize its interaction with dsDNA and to enhance internalization into cells, an analogue of TMPyP4 (5Me) was synthesized. Its selectivity for G-quadruplex DNA over dsDNA was evaluated by spectroscopic methods, and its role in stabilizing G-quadruplex DNA was assessed by fluorescence lifetime and thermal melting experiments. Biophysical studies indicated that 5Me interacts well with G-quadruplex DNA. In vitro cytotoxicity experiments with tumor cell lines (PANC-1, B16F10, and MDA MB 231) have revealed that 5Me can inhibit the growth of cancer cells comparable to TMPyP4. MTT and apoptotic assays demonstrated the ability of 5Me to specifically affect cancer cells over normal cells. Cell cycle analysis showed that 5Me, like TMPyP4, induces G2/M phase cell cycle arrest. In addition, 5Me is more effectively taken up by both cancer and normal cells than TMPyP4. In addition, we have noticed that 5Me is more efficient than TMPyP4 in inhibiting the growth of the cancer cells after irradiation with light (600-720 nm, 20 J/cm2, 50 mW/cm2). By and large, these experimental results indicate that 5Me can be an efficient chemotherapeutic as well as a PDT agent.

Photoinduced energy transfer in carbazole-BODIPY dyads.

A series of carbazole (CBZ)-boron dipyrromethene (BODIPY) based donor-acceptor dyads, CB1, CB2, and CB3, with CBZ as an energy donor, tethered together with spacers of varied sizes i.e., phenyl bridge, biphenyl bridge and diphenylethyne bridge, respectively, are reported. The newly synthesized dyads were characterized by various spectroscopic techniques. A comparison of the absorption and electrochemical data of the dyads with their reference compounds (i.e., 9-phenyl-9H-carbazole (C0) and N,N'-difluoroboryl-1,3,7,9-tetramethyl-5-phenyldipyrrin (B0)) revealed minimal ground-state interactions between the chromophores. Selective excitation of CBZ in the dyads at 290 nm resulted in the quenching of the CBZ emission followed by the appearance of BODIPY emission, revealing efficient energy transfer from singlet excited CBZ (1CBZ*) to BODIPY. The photoinduced energy transfer phenomenon was studied in three different solvents of varying polarity. The driving forces for energy transfer (ΔGEN) for all the dyads were found to be exothermic. The rate constants for energy transfer, kENT, measured by the femtosecond transient absorption technique in toluene were found to be in the range of 0.8-2.0 × 1010 s-1, depending on the type of spacer between the CBZ and BODIPY entities, and were in close agreement with the theoretically estimated rates according to the Förster energy transfer model. In contrast, selective excitation of BODIPY in these dyads at 485 nm resulted in small quenching of the BODIPY emission, suggesting a lack of major photochemical events originating from 1BODIPY*.

Photodynamic Therapy: Past, Present and Future.

Though we crossed many milestones in the field of medicine and health care in eradicating some deadly diseases over the past decades, cancer remained a challenge taking the lives of millions of people and having adverse effects on the quality of life of survivors. Chemotherapy and radiotherapy, the two existing major treatment modalities, have severe side effects and patients undergoing these treatments experience unbearable pain. Consequently, clinicians and researchers are working for the alternate treatment regimens, which can provide complete cure with minimum or no side effects. To this end, the present review highlights the major advances and future promises of photodynamic therapy, an emerging and promising therapeutic modality for combating cancer. We delve on various important aspects of photodynamic therapy including principle, mechanism of action, brief history and development of photosensitizers from first generation to the existing third generation, delivery strategies, development or suppression of immunity, combination therapy and future prospects.

Emerging of Inorganic Hole Transporting Materials For Perovskite Solar Cells.

Hole transporting material (HTM) is a significant component to achieve the high performance perovskite solar cells (PSCs). Over the years, inorganic, organic and hybrid (organic-inorganic) material based HTMs have been developed and investigated successfully. Today, perovskite solar cells achieved the efficiency of 22.1 % with with 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenyl-amine) 9,9-spirobifluorene (spiro-OMeTAD) as HTM. Nevertheless, synthesis and cost of organic HTMs is a major challenging issue and therefore alternative materials are required. From the past few years, inorganic HTMs showed large improvement in power conversion efficiency (PCE) and stability. Recently CuOx reached the PCE of 19.0% with better stability. These developments affirms that inorganic HTMs are better alternativesto the organic HTMs for next generation PSCs. In this report, we mainly focussed on the recent advances of inorganic and hybrid HTMs for PSCs and highlighted the efficiency and stability of PSCs improved by changing metal oxides as HTMs. Consequently, we expect that energy levels of these inorganic HTMs matches very well with the valence band of perovskites and improved efficiency helps in future practical deployment of low cost PSCs.

Light induced oxidation of an indoline derived system triggered spherical aggregates.

Indoline based donor-acceptor system (InBT) exhibits a colour transition from pink to orange to yellow in chloroform facilitated by the photo-oxidation of the N,N-dimethyl indoline of InBT and neutralized by chloride counter ions upon light irradiation at short and long range excitation wavelengths of 320 and 500 nm, which leads to spherical aggregates when subjected to methanol vapour diffusion (MVD).

Recent Advances of Cobalt(II/III) Redox Couples for Dye-Sensitized Solar Cell Applications.

In recent years dye-sensitized solar cells (DSSCs) have emerged as one of the alternatives for the global energy crisis. DSSCs have achieved a certified efficiency of >11% by using the I(-) /I3 (-) redox couple. In order to commercialize the technology almost all components of the device have to be improved. Among the various components of DSSCs, the redox couple that regenerates the oxidized sensitizer plays a crucial role in achieving high efficiency and durability of the cell. However, the I(-) /I3 (-) redox couple has certain limitations such as the absorption of triiodide up to 430 nm and the volatile nature of iodine, which also corrodes the silver-based current collectors. These limitations are obstructing the commercialization of this technology. For this reason, one has to identify alternative redox couples. In this regard, the Co(II/III) redox couple is found to be the best alternative to the existing I(-) /I3 (-) redox couple. Recently, DSSC test cell efficiency has risen up to 13% by using the cobalt redox couple. This review emphasizes the recent development of Co(II/III) redox couples for DSSC applications.

Corrole-ferrocene and corrole-anthraquinone dyads: synthesis, spectroscopy and photochemistry.

Two different donor-acceptor systems based on corrole-ferrocene and corrole-anthraquinone having the 'Olefin Bridge' at the ß-pyrrole position have been designed and synthesized. Both the dyads corrole-ferrocene () and corrole-anthraquinone () are characterized by elemental analysis, ESI-MS, (1)H NMR, UV-Visible, fluorescence spectroscopies (steady-state, femtosecond time-resolved), femtosecond transient absorption spectroscopy (fs-TA) and electrochemical methods. (1)H-NMR shows that two doublets at 6.50 and 7.25(δ) ppm belong to vinylic protons, which are characteristic of the formation of dyads. UV-Visible absorption spectra showed that dyads are merely superpositions of their respective constituent monomers and dominated by corrole S1 ← S0 (Q-band) and S2 ← S0 (Soret band) transitions with a systematic red-shift of both Soret and Q-bands along with the broadening of the bands. A prominent splitting of the Soret band for both the dyads is observed due to bulky substitutions at the peripheral position, which deviate from the planarity of the corrole macrocycle. Both the dyads exhibit significant fluorescence emission quenching (95-97%) of corrole emission compared to the free-base corrole monomer. Emission quenching is attributed to the excited-state intramolecular photoinduced electron transfer (PET) from corrole to anthraquinone in the dyad, whereas in the dyad it is reversed. The electron-transfer rates (kET) for and were found to be 3.33 × 10(11) and 2.78 × 10(10) s(-1), respectively. Despite their very different driving forces, charge separation (CS) and charge recombination (CR) are found to be in identical timescales.

Phosphorus(V)corrole- Porphyrin Based Hetero Trimers: Synthesis, Spectroscopy and Photochemistry.

'Axial-bonding'-type hetero trimers have been constructed by employing a simple 'inorganic' reaction such as axial bond formation of main group element containing phosphorus corrole. The approach is simple and modular in nature. The architecture of these hetero trimers such that, while a phosphorus(V)corrole forms the basal scaffolding unit, either two free-base porphyrins [(H 2 ) 2 -PCor] or Zn(II) porphyrins [(Zn) 2 -PCor] occupy the two axial sites via an aryloxy bridge. Both hetero trimeric species have been completely characterized by mass (FAB), UV/Vis, proton nuclear magnetic resonance spectroscopies and also by the differential pulse voltammetric method. Comparison of their spectroscopic and electrochemical data of these trimers with those of the corresponding reference compounds reveal that there is no apparent ring-to-ring interactions in these 'vertically' linked hetero trimers. Reduced fluorescence quantum yields were observed for [(H 2 ) 2 -PCor] and [(Zn) 2 -PCor] when compared to corresponding monomeric chromophores. Finally, a comparison is made between the presently reported phosphorus(V)corrole based hetero arrays and the previously reported analogous arrays based on Ge(IV)corrole with regard to their spectroscopic properties and photochemical activities.