RESUMO
PURPOSE: The aim of this study was to show the displacements and strain induced by the supraorbital band advancement during a craniofacial surgery for an anterior plagiocephaly on the orbital bones and the orbital content thanks to a numerical surgical simulation using the finite element method. METHODS: A three-dimensional (3D) finite element model of a child with an anterior plagiocephaly was entirely created from a tomodensitometry of a patient followed by our Craniofacial Pediatric team. Data of the tomodensitometry were computed with Slicer 3D to re-create the orbit geometry. Mesh production, properties of the model, and simulations of the fronto-orbital advancement were conducted on Hyperworks software (Altair Engineering, Inc., Detroit, MI, USA). RESULTS: The resulting 3D Finite Element Model was used to perform the supraorbital advancement simulation. Displacement and strain patterns were studied for orbital bones, oculomotor muscles, and eyeballs. Relative high strain in the both trochlear area and excycloration of the right orbit are among the most interesting results as torsional strabismus as V-pattern strabismus are often described in children with an anterior plagiocephaly. CONCLUSIONS: This pediatric Finite-Element Model of both orbits of a child with an anterior plagiocephaly showed the impact of the fronto-orbital advancement on the oculomotor system. This model described the relationship between the craniofacial surgery and the strabismus in the unilateral coronal synostosis. The advantages of this model are the many opportunities for improvement, including postoperative period and additional surgical procedures.
Assuntos
Craniossinostoses , Plagiocefalia , Criança , Análise de Elementos Finitos , Humanos , Lactente , Músculos Oculomotores , Órbita/cirurgiaRESUMO
OBJECTIVE: This study aimed to analyze the morphology of the hypoplasic mandible and its evolution during the growth period to better understand how it differs from the pediatric healthy mandible. METHOD: Three-dimensional mandibular models of hypoplasic and healthy children aged from 39 gestational weeks to 7 years old were analyzed with a morphometric method including data clustering. Morphological distinctions between pathological and healthy mandibles were highlighted. Bilateral and unilateral mandibular hypoplasia were distinguished. RESULTS: The study sample was composed of 31 hypoplasic children and as many sex- and age-matched healthy children. Morphological distinctions between pathological and healthy mandibles were highlighted only from the first year of life. In bilateral hypoplasia, the overall mandibular dimensions were reduced while there was only a ramus asymmetry in unilateral mandibular hypoplasia (mean ± SD of the difference between the Grp03c and Grp03b subgroups: 6.80 ± 6.37 - P value = 1.64e-3 for the height of the left ramus versus 0.18 ± 4.18 - P value = .82 for the height of the right ramus). Supervised classification trees were built to identify the pathology and discriminate unilateral from bilateral mandibular hypoplasia (prediction rates = 81% and 84%, respectively). CONCLUSIONS: Based on a morphometric analysis, we demonstrated that mandibular hypoplasia significantly impacts the mandibular morphology only from the first year of life, with a distinction between bilateral and unilateral hypoplasia.
Assuntos
Mandíbula , Criança , HumanosRESUMO
OBJECTIVES: Numerous tools have been developed to characterize the morphometry of 3D models. The aim of this study was to apply these techniques to better understand the morphometric growth pattern of healthy children's mandibles. MATERIAL AND METHODS: The study sample was composed of 480 very young children aged from 36 gestational weeks to 7 years old. The sample was divided into three subsamples according to the development stages of their deciduous dentition. Several biometric data were collected on 3D mandibular models. RESULTS: There was homothetic growth during the first years of life. Once all deciduous teeth were fully erupted, the mandibular corpus warped more independently of the ramus, and the inter-individual variability was more pronounced. Throughout the growth period, several subgroups could be identified, highlighting the morphological growth pattern of the mandible. CONCLUSIONS: A particular morphogenesis of the mandible during the growth period was observed, which was correlated with deciduous dentition development. In younger individuals, this morphological pattern was mainly characterized by the progressive closure of the chin symphysis and ramus growth. The tongue movements in the oral space, depending on whether the child was bottle- or breast-fed, may explain this result. As the children grew older, the mandible widened to create sufficient space for the developing teeth buds. During the eruption of deciduous dentition, the mandible took on various morphologies, which was likely based on the child's sex and diet. Therefore, we assume that this mandibular morphogenesis is induced by the functional strains affecting the mandible during deciduous teeth development.
Assuntos
Mandíbula/anatomia & histologia , Dente Decíduo/anatomia & histologia , Criança , Pré-Escolar , Feminino , Desenvolvimento Fetal , Feto/anatomia & histologia , França , Humanos , Lactente , Recém-Nascido , Masculino , Mandíbula/crescimento & desenvolvimento , Estudos Retrospectivos , Dente Decíduo/crescimento & desenvolvimentoRESUMO
OBJECTIVE: Some cardiopulmonary resuscitation (CPR) monitoring devices were released in recent years. Some of them are motion sensors. There are no guidelines were to position future or present sensors during CPR. We evaluate the possible influence of the location of motion sensors by a high-speed camera during a CPR on a manikin. MATERIAL AND METHODS: We performed a motion analysis by a high-speed camera during chest compression (CC) on a manikin to quantify chest inhomogeneous displacements and rescuer motion. RESULTS: Midline chest was found to have an inhomogeneous depth during CC (19 mm for the upper sternum, 27 mm for the middle of the sternum, and 47 mm for the xiphoid). Rescuer anatomy has a complex motion. CONCLUSION: The direct application of the sensor under the hand performing CC seems to be the more accurate solution if the device allows it.
Assuntos
Reanimação Cardiopulmonar/métodos , Manequins , Movimento (Física) , Fotografação , Tórax/fisiologia , Acelerometria , Reanimação Cardiopulmonar/instrumentação , Retroalimentação , Feminino , Humanos , Masculino , Posicionamento do PacienteRESUMO
Cannulation process intervenes before implantation of pedicle screw and depends on the surgeon's experience. A reliable experimental protocol has been developed for the characterization of the slipping behavior of the surgical tool on the cortical shell simulated by synthetic materials. Three types of synthetic foam samples with three different densities were tested using an MTS Acumen 3 A/T electrodynamic device with a tri-axis 3 kN Kistler load cell mounted on a surgical tool, moving at a constant rotational speed of 10° mm-1 and performing a three-step cannulation test. Cannulation angle varied between 10° and 30°. Synthetic samples were scanned after each tests, and cannulation coefficient associated to each perforation section was computed. Reproducibility tests resulted in an ICC for Sawbone samples of 0.979 (p < 0.001) and of 0.909 (p < 0.001) for Creaplast and Sawbone samples. Cannulation coefficient and maximum force in Z-axis are found the best descriptors of the perforation. Angular threshold for perforation prediction was found to be 17.5° with an area under the curve of the Receiver Operating Characteristic of 89.5%. This protocol characterizes the cannulation process before pedicle screw insertion and identifies the perforation tool angle until which the surgical tool slips on the cortical shell depending on bone quality.
Assuntos
Parafusos Pediculares , Fusão Vertebral , Reprodutibilidade dos Testes , Osso e OssosRESUMO
Identification of Traumatic axonal injury (TAI) is critical in clinical practice, particularly in terms of long-term prognosis, but also for medico-legal issues, to verify whether the death or the after-effects were attributable to trauma. Multidisciplinary approaches are an undeniable asset when it comes to solving these problems. The aim of this work is therefore to list the different techniques needed to identify axonal lesions and to understand the lesion mechanisms involved in their formation. Imaging can be used to assess the consequences of trauma, to identify indirect signs of TAI, to explain the patient's initial symptoms and even to assess the patient's prognosis. Three-dimensional reconstructions of the skull can highlight fractures suggestive of trauma. Microscopic and immunohistochemical techniques are currently considered as the most reliable tools for the early identification of TAI following trauma. Finite element models use mechanical equations to predict biomechanical parameters, such as tissue stresses and strains in the brain, when subjected to external forces, such as violent impacts to the head. These parameters, which are difficult to measure experimentally, are then used to predict the risk of injury. The integration of imaging data with finite element models allows researchers to create realistic and personalized computational models by incorporating actual geometry and properties obtained from imaging techniques. The personalization of these models makes their forensic approach particularly interesting.
Assuntos
Lesão Axonal Difusa , Humanos , Fenômenos Biomecânicos , Lesão Axonal Difusa/diagnóstico por imagem , Lesão Axonal Difusa/fisiopatologia , Lesão Axonal Difusa/patologia , Análise de Elementos Finitos , Imageamento Tridimensional , Patologia Legal/métodos , Axônios/patologia , Axônios/fisiologia , Medicina Legal/métodosRESUMO
Finite element modeling provides a digital representation of the human body. It is currently the most pertinent method to study the mechanisms of head injury, and is becoming a scientific reference in forensic expert reports. Improved biofidelity is a recurrent aim of research studies in biomechanics in order to improve earlier models whose mechanical properties conformed to simplified elastic behavior and mechanic laws. We aimed to study force transmission to the brain following impacts to the head, using a finite element head model with increased biofidelity. To the model developed by the Laboratory of Applied Biomechanics of Marseille, we added new brain structures (thalamus, central gray nuclei and ventricular systems) as well as three tracts involved in the symptoms of head injury: the corpus callosum, uncinate tracts and corticospinal tracts. Three head impact scenarios were simulated: an uppercut with the prior model and an uppercut with the improved model in order to compare the two models, and a lateral impact with an impact velocity of 6.5 m/s in the improved model. In these conditions, in uppercuts the maximum stress values did not exceed the injury risk threshold. On the other hand, the deep gray matter (thalamus and central gray nuclei) was the region at highest risk of injury during lateral impacts. Even if injury to the deep gray matter is not immediately life-threatening, it could explain the chronic disabling symptoms of even low-intensity head injury.
Assuntos
Traumatismos Craniocerebrais , Substância Cinzenta , Humanos , Cabeça , Encéfalo , Fenômenos Biomecânicos , Análise de Elementos FinitosRESUMO
Our study aimed to compare the biomechanical behaviour of mandibles with or without titanium miniplates when subjected to an impact after bone healing using a finite element model (FEM) of the human mandible. We simulated mandibular trauma on an FEM of a human mandible carrying or not two parasymphyseal miniplates and applying a concentrated force of 2000 N to four different areas, including the insertion area, the area straddling the edge of the miniplates and the adjacent bone, at a distance from the miniplates on the symphysis, and on the basilar border of the mandible below the miniplates. Then, we compared the Von Mises stress distributions between the two models. In the case of an impact on the miniplates, the maximum Von Mises stress occurred in two specific areas, on the cortical bone at the posterior border of the two miniplates at a distance from the impact, while in the model without miniplates, the Von Mises stresses were homogenously distributed in the impact area. The presence of titanium miniplates in the case of trauma affects the biomechanical behaviour of the mandible and could cause more complex fractures. We recommend informing patients of this potential risk.
RESUMO
BACKGROUND: Pedicular screws pull-out has been well studied unlike their insertion. A need for characterizing cannulation before pedicle screw implantation is highlighted in literature and offers promising prospects for future intra-operation instrumentation. A reliable cannulation protocol for ex-vivo testing in swine and cadaver vertebrae is presented in this work to predict extra pedicular perforation. METHODS: An MTS Acumen 3 A/T electrodynamic device, with a tri-axis 3 kN Kistler load cell mounted on a surgical tool was used to reproduce surgeon's gesture by moving at a constant rotational speed of 10°/mm and performing a three-section test. Perforation of the pedicle's cortical shell was planned through a design of experiment on the surgical tool angle at the entry point. Samples were scanned before and after mechanical tests and reproducibility of the protocol was tested on synthetic foam. Computation of the angle between cannulation tool and pedicle cortical shell was performed as well as cannulation coefficient of each perforation section. FINDINGS: A total of 68 pedicles were tested: 19 perforated and 21 non-perforated human pedicles, 17 perforated and 16 non-perforated swine pedicles. The reproducibility of the protocol for cannulation coefficient computation resulted in an intraclass correlation coefficient of 0.979. Cannulation coefficients results presented variability within spinal levels as well as between swine and human model. Correlation between bone density and cannulation coefficient was found significant (p < 0.005). Torque measurement was found to be the best predictor of perforation. Threshold of angle for prediction of perforation was found to be 21.7°. INTERPRETATION: Characterizing pedicle cannulation enables to predict extra pedicular perforation. Influence of bone mineral density and patient-specific morphology on pedicle cannulation has been highlighted together with a comparison of swine and cadaver models.
Assuntos
Parafusos Pediculares , Fusão Vertebral , Humanos , Animais , Suínos , Reprodutibilidade dos Testes , Tomografia Computadorizada por Raios X , Coluna Vertebral/cirurgia , Cadáver , CateterismoRESUMO
Calcified aortic stenoses are among the most prevalent form of cardiovascular diseases in the industrialized countries. This progressive disease, with no effective medical therapy, ultimately requires aortic valve replacement - either a surgical or very recently transcatheter aortic valve implantation. Increase leaflet mechanical stress is one of the main determinants of the structural deterioration of bioprosthetic aortic valves. We applied a coupled in vitro/in silico method to compare the timing, magnitude, and regional distribution of leaflet mechanical stress in porcine versus pericardial bioprostheses (Mosaic and Trifecta). A double activation simulator was used for in vitro testing of a bioprosthesis with externally mounted pericardium (Abbott, Trifecta) and a bioprosthesis with internally mounted porcine valve (Medtronic, Mosaic). A non-contact system based on stereophotogammetry and digital image correlation (DIC) with high spatial and temporal resolution (2000 img/s) was used to visualize the valve leaflet motion and perform the three-dimensional analysis. A finite element model of the valve was developed, and the leaflet deformation obtained from the DIC analysis was applied to the finite element model calculate local leaflet mechanical stress throughout the cardiac cycle. The maximum leaflet stress was higher with the pericardial versus the porcine bioprosthesis (2.03 vs. 1.30 MPa) For both bioprostheses the highest values of leaflet stress occurred during diastole and were primarily observed in the upper leaflet edge near the commissures and to a lesser extent in the mid-portion of the leaflet body. In conclusion, the coupled in vitro/in silico method described in this study shows that the highest levels of leaflet stress occur in the regions of the commissures and mid-portion of the leaflet body. This method may have important insight with regard to bioprosthetic valve durability. Our results suggest that, compared to porcine bioprostheses, those with externally mounted pericardium have higher leaflet mechanical stress, which may translate into shorter durability.
Assuntos
Bioprótese , Próteses Valvulares Cardíacas , Substituição da Valva Aórtica Transcateter , Animais , Valva Aórtica/cirurgia , Bovinos , Desenho de Prótese , SuínosRESUMO
INTRODUCTION: Whether to conserve or remove titanium miniplates after rigid internal fixation of mandibular fractures still remains controversial. Miniplates could affect the biomechanical behaviour of the mandible in case of trauma, and therefore cause more complex fractures. MATERIALS AND METHODS: An experimental study, consisting in simulating a mandibular trauma, was designed in order to compare the fractures caused by an impact on the mandible in the presence or absence of an internal fixation. We simulated an impact on the right parasymphysis region in 10 post-mortem human subjects, according to the Charpy impact test method at an impact speed of 7.4 m/s, using a 5 kg test impactor. RESULTS: In the control group, the fracture lines were vertical and straight, without comminution. In the miniplate group, the fractures occurred close to the miniplates (4 cases) and under the miniplates (one case). The fracture lines were more complex, even comminuted in 2 cases. Thus, miniplates impacted the biomechanical behavior of the mandible, resulting in more complex fractures. CONCLUSION: Our experimental study highlighted the impact of the presence of miniplates on the mandible in case of trauma, and the risk of causing more complex fractures. We therefore recommend further investigations to determine if titanium miniplates should be systematically removed after bone healing, in patients with a higher risk of trauma in relation with previous assault injuries, alcohol or substance abuse, the practice of fighting or contact sport/activities, and soldiers.
Assuntos
Placas Ósseas , Fraturas Mandibulares , Humanos , Placas Ósseas/efeitos adversos , Titânio/efeitos adversos , Fraturas Mandibulares/etiologia , Fraturas Mandibulares/cirurgia , Fixação Interna de Fraturas/efeitos adversos , Mandíbula/cirurgiaRESUMO
Introduction This study aims at identifying mechanical characteristics under bi-axial loading conditions of extracted swine pia mater (PM) and dura and arachnoid complex (DAC). Methods 59 porcine spinal samples have been tested on a bi-axial experimental device with a pre-load of 0.01 N and a displacement rate of 0.05 mm·s-1. Post-processing analysis included an elastic modulus, as well as constitutive model identification for Ogden model, reduced Gasser Ogden Holzapfel (GOH) model, anisotropic GOH model, transverse isotropic and anisotropic Gasser models as well as a Mooney-Rivlin model including fiber strengthening for PM. Additionally, micro-structure of the tissue was investigated using a bi-photon microscopy. Results Linear elastic moduli of 108 ± 40 MPa were found for DAC longitudinal direction, 53 ± 32 MPa for DAC circumferential direction, with a significant difference between directions (p < 0.001). PM presented significantly higher longitudinal than circumferential elastic moduli (26 ± 13 MPa vs 13 ± 9 MPa, p < 0.001). Transversely isotropic and anisotropic Gasser models were the most suited models for DAC (r2 = 0.99 and RMSE:0.4 and 0.3 MPa) and PM (r2 = 1 and RMSE:0.06 and 0.07 MPa) modelling. Conclusion This work provides reference values for further quasi-static bi-axial studies, and is the first for PM. Collagen structures observed by two photon microscopy confirmed the use of anisotropic Gasser model for PM and the existence of fenestration. The results from anisotropic Gasser model analysis depicted the best fit to experimental data as per this protocol. Further investigations are required to allow the use of meningeal tissue mechanical behaviour in finite element modelling with respect to physiological applications. STATEMENT OF SIGNIFICANCE: This study is the first to present biaxial tensile test of pia mater as well as constitutive model comparisons for dura and arachnoid complex tissue based on such tests. Collagen structures observed by semi-quantitative analysis of two photon microscopy confirmed the use of anisotropic Gasser model for pia mater and existence of fenestration. While clear identification of fibre population was not possible in DAC, results from anisotropic Gasser model depicted better fitting on experimental data as per this protocol. Bi-axial mechanical testing allows quasi-static characterization under conditions closer to the physiological context and the results presented could be used for further simulations of physiology. Indeed, the inclusion of meningeal tissue in finite element models will allow more accurate and reliable numerical simulations.
Assuntos
Aracnoide-Máter , Pia-Máter , Animais , Anisotropia , Fenômenos Biomecânicos , Módulo de Elasticidade , Estresse Mecânico , Suínos , Resistência à TraçãoRESUMO
OBJECTIVE/BACKGROUND: This retrospective non-randomized controlled cohort study aimed to evaluate the efficiency of simultaneous maxillary expansion and mandibular advancement for the management of pediatric OSAS. PATIENTS/METHODS: The sample was composed of 94 children treated with an innovative orthopedic device to correct a Class II malocclusion associated with an OSAS. Polysomnographic recordings were performed before and after the treatment. We also included a group of 113 age-matched control patients who had the same pathologies, but who did not receive the orthopedic treatment at the time they undergone polysomnographic exams. Statistical tests evaluated the significance of the evolution of these data, both in treated and untreated control patients. RESULTS: After nine months (±3 months) of treatment, respiratory OSAS symptoms significantly improved: the AHI significantly decreased as it became inferior to the pathological threshold (<1) for 53% of the treated patients' sample, with a greater proportion within the youngest age group (63%). Only two patients still presented a moderate OSAS after treatment, with an AHI slightly superior to 5. This positive evolution of OSAS respiratory symptoms was not observed within the control group, highlighting the real impact of the orthopedic treatment over the children's natural growth. However, sleep remained fragmented following the treatment. CONCLUSIONS: This study confirmed that simultaneous maxillary expansion and mandibular advancement induced a modification of the maxilla-mandibular anatomy, helping in the significant improvement of the respiratory OSAS symptoms. Then, considering these preliminary results, pediatric OSAS can be managed with this new orthopedic strategy, especially if it is performed early.
Assuntos
Maxila , Apneia Obstrutiva do Sono , Criança , Estudos de Coortes , Humanos , Mandíbula , Polissonografia/métodos , Estudos Retrospectivos , Apneia Obstrutiva do Sono/diagnóstico , Apneia Obstrutiva do Sono/cirurgiaRESUMO
The frequency of midface and frontobasal fractures has increased over the past 40 years despite the improvement and stringent regulation implemented on modern safety equipment (belts, helmets ). This observation might be correlated with the progress of radiodiagnosis tools. Literature was reviewed according to Prisma guidelines. We searched for reviewed articles, published between January 2000 and December 2017, through Medline (Pubmed) online databases and ScienceDirect, using the following MeSH Keywords: "Le Fort classification", "Le Fort fracture", "Frontobasal fracture", "skull base fracture", "Midface Fractures". Among 652 patients with frontobasal fractures, 125 (19.1%) were associated with a Le Fort fracture. 59 (9%) were associated with Le Fort III fracture, 51 (7.8%) with Le Fort II fracture and 15 (2.3%) with Le Fort I fracture. When frontobasal fractures were associated with midfacial fractures, we found 18 cerebrospinal fluid leaks (11.8 %) and 19 cases of meningitis (12.5 %). When only the frontobasal area was involved, there were 6 cerebrospinal fluid leaks (4.3 %) and 6 meningitis (4.3 %). Our results highlight a regular association between Le Fort fractures and frontobasal fractures for stages II and stage III of Le Fort fractures and also found a higher rate of neuro-septic complication. Further research shall investigate treatment and monitoring recommendations fitting modern epidemiology of craniofacial traumatology.
Assuntos
Fraturas Maxilares , Fenômenos Biomecânicos , Humanos , Fraturas Maxilares/diagnóstico , Fraturas Maxilares/epidemiologia , Fraturas Maxilares/etiologiaRESUMO
BACKGROUND: The sacroiliac joint is an important source of low back pain. In severe cases, sacroiliac joint fusion is used to reduce pain, but revision rates can reach 30%. The lack of initial mechanical stability may lead to pseudarthrosis, thus not alleviating the patient's symptoms. This could be due to the damage induced to the interosseous ligament during implant insertion. Decoupling instrumentation steps (drilling-tapping and implant insertion) would allow verifying this hypothesis. Moreover, no biomechanical studies have been published on sacroiliac joint fixation with an oblique lateral approach, while it has important clinical advantages over the direct lateral approach. METHODS: Eight cadaveric human pelves with both ischia embedded were tested in three sequential states: intact, drilled-tapped and instrumented with one cylindrical threaded implant with an oblique lateral trajectory. Specimens were assigned one of two insertion sites (distal point; near the posterior superior iliac spine, and proximal point; anterosuperior to the distal point) and tested in compression and flexion-extension. Vertical and angular displacements of the sacroiliac joint were measured locally using digital image correlation methods. FINDINGS: In compression, instrumentation significantly reduced vertical displacements (17% (SD 22%), Pâ¯=â¯0.04) but no difference was found for angular displacements or flexion-extension loads (Pâ¯>â¯0.05). Drilling-tapping did not change the stability of the sacroiliac joint (Pâ¯>â¯0.05); there was no statistical difference between the insertion sites (Pâ¯>â¯0.05). INTERPRETATIONS: Insertion of one implant through either the distal or proximal insertion site with an oblique lateral approach significantly reduced vertical displacements of the sacroiliac joint in compression, a predominant load of this joint. RESEARCH ETHICS COMMITTEE: Polytechnique Montreal: CÉR-1617-30.
Assuntos
Fenômenos Mecânicos , Procedimentos Ortopédicos/métodos , Articulação Sacroilíaca/cirurgia , Fenômenos Biomecânicos , Cadáver , Humanos , Ílio/cirurgia , Masculino , Pessoa de Meia-Idade , Próteses e ImplantesRESUMO
Brain and cervical injuries are often described after major facial impacts but rarely after low-intensity mandibular impacts. Force transmission to the brain and spinal cord from a mandibular impact such as a punch was evaluated by the creation and validation of a complete finite element model of the head and neck. Anteroposterior uppercut impacts on the jaw were associated with considerable extension and strong stresses at the junction of the brainstem and spinal cord. Hook punch impacts transmitted forces directly to the brainstem and the spinal cord without extension of the spinal cord. Deaths after this type of blow with no observed histological lesions may be related to excessive stressing of the brainstem, through which pass the sensory-motor pathways and the vagus nerve and which is the regulatory center of the major vegetative functions. Biological parameters are different in each individual, and by using digital modeling they can be modulated at will (jaw shape, dentition ) for a realistic approach to forensic applications.
Assuntos
Lesões Encefálicas/diagnóstico por imagem , Simulação por Computador , Traumatismos Mandibulares/diagnóstico por imagem , Traumatismos da Medula Espinal/diagnóstico por imagem , Adulto , Lesões Encefálicas/etiologia , Análise de Elementos Finitos , Medicina Legal/métodos , Humanos , Imageamento Tridimensional , Masculino , Traumatismos Mandibulares/complicações , Abuso Físico , Traumatismos da Medula Espinal/etiologia , Tomografia Computadorizada por Raios XRESUMO
BACKGROUND: Although many studies focus on short-term side effects of radioiodine therapy, almost none studied long-term side effects. We assessed radioiodine long-term salivary side effects after radioiodine treatment for differentiated papillary thyroid carcinoma and compared it to short-term morbidity within the same population. METHODS: A standardized self-administrated questionnaire was submitted in 2019 by patients treated with radioiodine between January 2011 and December 2012. These patients had already answered the same questionnaire 6 years before. RESULTS: Our study showed a significant reduction for salivary side effects: discomfort in submandibular or parotid area, swelling, pain, a bad or salty taste in the mouth, allowing to get back to a "normal" diet. CONCLUSIONS: Our study suggests that a significant rate of patients will recover from I131 therapy salivary side effects. As almost 30% of these remissions happened during our late stage follow-up, we highlight the necessity of a long-term follow-up in these patients.
Assuntos
Neoplasias da Glândula Tireoide , Xerostomia , Humanos , Radioisótopos do Iodo/efeitos adversos , Glândulas Salivares , Câncer Papilífero da Tireoide , Neoplasias da Glândula Tireoide/radioterapiaRESUMO
An original in vitro/in silico method was developed to estimate the local and global mechanical stress applied on the bioprosthetic valve leaflet, which can be important for better understanding of the valve durability. A non-contact system based on stereophotogammetry and digital image correlation enabled filming and studying the valve leaflet movement frame by frame and performing three-dimensional analysis. The deformation was applied in a finite element model in order to calculate the local mechanical stress applied. High stress regions were primarily observed in the upper leaflet edge and belly and to a lesser extent at the free leaflet edge.
Assuntos
Valva Aórtica/cirurgia , Bioprótese , Implante de Prótese de Valva Cardíaca/efeitos adversos , Próteses Valvulares Cardíacas/efeitos adversos , Estresse Mecânico , Fenômenos Biomecânicos , Humanos , Modelos Cardiovasculares , Desenho de Prótese , StentsRESUMO
BACKGROUND: Sacroiliac joint (SIJ) is a known chronic pain-generator. The last resort of treatment is the arthrodesis. Different implants allow fixation of the joint, but to date there is no tool to analyze their influence on the SIJ biomechanics under physiological loads. The objective was to develop a computational model to biomechanically analyze different parameters of the stable SIJ fixation instrumentation. METHODS: A comprehensive finite element model (FEM) of the pelvis was built with detailed SIJ representation. Bone and sacroiliac joint ligament material properties were calibrated against experimentally acquired load-displacement data of the SIJ. Model evaluation was performed with experimental load-displacement measurements of instrumented cadaveric SIJ. Then six fixation scenarios with one or two implants on one side with two different trajectories (proximal, distal) were simulated and assessed with the FEM under vertical compression loads. RESULTS: The simulated S1 endplate displacement reduction achieved with the fixation devices was within 3% of the experimentally measured data. Under compression loads, the uninstrumented sacrum exhibited mainly a rotation motion (nutation) of 1.38° and 2.80° respectively at 600 N and 1000 N, with a combined relative translation (0.3 mm). The instrumentation with one screw reduced the local displacement within the SIJ by up to 62.5% for the proximal trajectory vs. 15.6% for the distal trajectory. Adding a second implant had no significant additional effect. CONCLUSION: A comprehensive finite element model was developed to assess the biomechanics of SIJ fixation. SIJ devices enable to reduce the motion, mainly rotational, between the sacrum and ilium. Positioning the implant farther from the SIJ instantaneous rotation center was an important factor to reduce the intra-articular displacement. CLINICAL RELEVANCE: Knowledge provided by this biomechanical study enables improvement of SIJ fixation through optimal implant trajectory.
RESUMO
INTRODUCTION: Strangulation is a medicolegal form of mechanical asphyxia, and can be difficult to identify if cutaneous damage to the neck is limited. We began by creating a numerical model of a hyoid bone with adjustable anthropometric parameters and then subjected our model to compression simulating a precision grip on the neck from the front. MATERIALS AND METHODS: We selected six bones from the 77 hyoid bones contained in the database we created during a previous study led by our laboratory, in which we demonstrated the sexual dimorphism of this bone and identified the minimal force required for fracture. The anthropometric characteristics of these six bones (angle, length and width) corresponded to those of the 10th, 50th and 90th percentiles from cluster 1 (male individuals) and cluster 2 (female individuals), respectively. After enhancing, developing and meshing the selected 3D models, we analysed and reproduced simulation conditions that were as close as possible to the in vivo conditions of neck strangulation from the front (area of pressure on the bone, tissue environment, and biological variability of this bone). RESULTS: We modelled the six numerical hyoid bone models using the finite element method. For all models, the simulation of mechanical pressure applied to simulate anterior strangulation resulted in fractures. The forces required to produce these fractures matched the results obtained in the experimental testing of dissected hyoid bones. CONCLUSION: Six finite element numerical models were created, covering the anthropometric morphological variability of the hyoid bone. These six models enabled numerical simulation of the in vivo behaviour of a hyoid bone subjected to one-handed strangulation.