Design of a sensor to estimate suspended sediment transport in situ using the measurements of water velocity, suspended sediment concentration and depth.

- The sediment transport plays a major role in every aquatic ecosystem. However, the lack of instruments to monitor this process has been an obstacle to understanding its effects. We present the design of a single sensor built to measure water velocity, suspended sediment concentration and depth in situ, and how to associate the three variables to estimate and analyse sediment transport. During the laboratory calibrations, the developed instrument presented a resolution from 0.001 g/L to 0.1 g/L in the 0-12 g/L range for the measurement of suspended sediment concentration and 0.05 m/s resolution for 0-0.5 m/s range and 0.001 m/s resolution for 0.5-1 m/s range for the measurement of water velocity. The device was deployed for 6 days in an estuarine area with high sediment dynamics to evaluate its performance. During the field experiment, the sensor successfully measured the tidal cycles and consequent change of flow directions, and the suspended sediment concentration in the area. These measurements allowed to estimate water discharge and sediment transport rates during the different phases of tides, and the daily total volume of water and total amount of sediment passing through the estuary.

Effectiveness of contact tracing and quarantine on reducing COVID-19 transmission: a retrospective cohort study.

OBJECTIVES: Contact tracing and quarantine are common measures used in the management of infectious disease outbreaks. However, few studies have measured their impact on the control of the COVID-19 pandemic. This study aimed to assess the effectiveness of those measures on reducing transmission of severe acute respiratory syndrome coronavirus 2 in a community setting. STUDY DESIGN: The study design is a retrospective cohort study. METHODS: A retrospective cohort study of COVID-19 cases notified in Eastern Porto from March 1st to April 30th, 2020 was performed. Intervention and control cohorts were defined based on whether cases were subjected to contact tracing and quarantine measures before the laboratory confirmation of disease. The number of secondary cases per index case and the proportion of cases with subsequent secondary cases were the primary outcomes. Secondary outcomes included the time from symptom onset to specimen collection and the number of close contacts. The analysis was stratified according to whether national lockdown measures had already been implemented. RESULTS: The intervention and control cohorts comprised 98 and 453 cases, respectively. No differences were observed concerning primary outcomes. The intervention group had a shorter time between symptom onset and specimen collection (median: 3 days, interquartile range [IQR]: 1-6, vs. median: 5 days, IQR: 2-7, P-value = 0.004) and fewer close contacts (median: 0, IQR: 0-2, vs. median: 2, IQR: 1-4, P-value<0.001). The stratified analysis returned similar results. CONCLUSION: Local public health measures were effective in reducing the time between symptom onset and laboratory diagnosis and the number of close contacts per case. No effect was apparent on secondary case figures, suggesting that further measures may be required.

Design of a Multipoint Cost-Effective Optical Instrument for Continuous In-Situ Monitoring of Turbidity and Sediment.

A cost-effective optical instrument for continuous in-situ monitoring applications is presented. With a production cost in raw materials of 38 €, a power consumption of 300 A in sleep mode and 100 mA in active mode (5 ms reading), and a capacity to monitor turbidity and sedimentary displacement at eight different depths in the water column, the sensor was developed for sediment monitoring in coastal areas. Due to the extent and dynamics of the processes involved in these areas, observations require a wide spatial and temporal resolution. Each of the eight monitoring nodes uses one infrared backscatter channel, to estimate turbidity and sediment concentration, and one ultraviolet with one infrared transmitted light channels to distinguish organic/inorganic composition of the suspended material load. An in-lab calibration was conducted, using formazine to correlate turbidity with the electronic outputs of the instrument. An analysis of the influence of external light sources and correction techniques were performed. Moreover, an in-lab experiment was conducted to study the behaviour of the sensor-to-sediment transport, wash load and sediment accumulation. The device was deployed, with a water level sensor, in an estuarine area with high sediment dynamics. The monitoring data were analysed, showing the potential of the device to continuously monitor turbidity, sediment processes, and distinguish between organic and inorganic matter, at the different depths in the water column.

Genetic Polymorphisms in ACTN3 Contribute to the Etiology of Bruxism in Children.

Objective: Bruxism is a condition defined as a masticatory muscle activity with an unexplored genetic background. The aim of this study was to evaluate the association between genetic polymorphisms in ACTN3 and bruxism. Study design: A total of 151 biological-unrelated children, aged 7-12 years were included in a case control ratio of 1:1.5. The data collection was performed during interview and clinical examination. Saliva samples were collected from all children and 3 genetic polymorphisms in the ACTN3 (rs678397, rs1671064 and rs1815739) were selected for genotyping using real time PCR. Pearson chisquare calculation was used to assess Hardy-Weinberg equilibrium and to evaluate the association between genotypes and alleles frequencies for each genetic polymorphism in the co-dominant and recessive models. An alpha of 5% was used. Results: The genetic polymorphisms rs678397, rs1671064 and rs1815739 were associated with bruxism in the co-dominate model and in the recessive model (p<0.05). Allele distribution was also associated with bruxism for the polymorphisms rs678397 and rs1671064 (p<0.05). Conclusion: The genetic polymorphisms rs678397, rs1671064 and rs1815739 in ACTN3 are associated with bruxism and can contribute to the etiology of this condition in children.

Highly sensitive thermoelectric touch sensor based on p-type SnO x thin film.

Here, the ability of using p-type tin oxide (SnO x ) thin films as a thermal sensor has been investigated. Firstly, the thermoelectric performance was optimized by controlling the thickness of the SnO x film from 60 up to 160 nm. A high Seebeck coefficient of +263 µV K-1 and electrical conductivity of 4.1 × 102 (S m-1) were achieved in a 60 nm thick SnO x film, due to a compact nanostructured film and the absence of the Sn metallic phase, which was observed for the thicker SnO x film leading to a typical thermoelectric transport properties of a n-type Sn film. Moreover, x-ray photoelectron spectroscopy revealed the co-existence of SnO (79.7%) and SnO2 (20.3%) phases in the 60 nm thick SnO x film, while the optical measurements revealed an indirect gap of 1.8 eV and a direct gap of 2.7 eV, respectively. The 60 nm-SnO x thin film have been tested as a thermoelectric touch sensor, achieving a Vsignal /Vnoise  ≈ 20, with a rise time <1 s. Therefore, this work provides an efficient way for developing highly efficient thermal sensors with potential use in display technologies.

Development of a Cost-Effective Optical Sensor for Continuous Monitoring of Turbidity and Suspended Particulate Matter in Marine Environment.

A cost-effective optical sensor for continuous in-situ monitoring of turbidity and suspended particulate matter concentration (SPM), with a production cost in raw materials less than 20 €, is presented for marine or fluvial applications. The sensor uses an infrared LED and three photodetectors with three different positions related to the light source-135º, 90º and 0º-resulting in three different types of light detection: backscattering, nephelometry and transmitted light, respectively. This design allows monitoring in any type of environment, offering a wide dynamic range and accuracy for low and high turbidity or SPM values. An ultraviolet emitter-receiver pair is also used to differentiate organic and inorganic matter through the differences in absorption at different wavelengths. The optical transducers are built in a watertight structure with a radial configuration where a printed circuit board with the electronic signal coupling is assembled. An in-lab calibration of the sensor was made to establish a relation between suspended particulate matter (SPM) or the turbidity (NTU) to the photodetectors' electrical output value in Volts. Two different sizes of seashore sand were used (180 µm and 350 µm) to evaluate the particle size susceptibility. The sensor was tested in a fluvial environment to evaluate SPM change during sediment transport caused by rain, and a real test of 22 days continuous in-situ monitoring was realized to evaluate its performance in a tidal area. The monitoring results were analysed, showing the SPM change during tidal cycles as well as the influence of the external light and biofouling problems.

Safety assessment of starch-based personal care products: Nanocapsules and pickering emulsions.

The safety profile of the ingredients used in topical dosage forms and its evaluation is an issue of utmost importance. A suitable equilibrium between safety and efficacy is crucial before promoting a dermatological product. The aim of this work was to assess the safety and biological effects of starch-based vehicles (St-BV) used in such products. The hazard, exposure and dose-response assessment were used to characterize the risk of each ingredient. The EpiSkin™ assay and human repeat insult patch tests were performed to compare the theoretical safety assessment to in vitro and in vivo data. The efficacy of the St-BV was studied using biophysical measurements in human volunteers during 28 days, showing that all ingredients and their combinations were safe for the consumer. Tissue viability determined using the EpiSkin™ testing reached values between 84.0 ±â€¯5.0% and 98.0 ±â€¯8.6% after application of St-BV, which were considered as non-irritant to the skin. These observations were confirmed by the in vivo studies where the St-BV did not induce any sensitization on the volunteers, being safe for human use. Moreover, St-BV increased skin hydration and microcirculation, emerging as an attractive alternative to chemical raw materials.

Design of minocycline-containing starch nanocapsules for topical delivery.

Pharmaceutical research has been focussed on developing improved delivery systems while exploring new ways of using approved excipients. The present work investigated the potential of starch nanocapsules (StNC) as a topical delivery platform for hydrophilic antimicrobial drugs using minocycline hydrochloride (MH) as a model drug. Thus, a quality by design approach was used to assess the role of different factors that affect the main pharmaceutical properties of StNC prepared using an emulsification-solvent evaporation method. Full characterisation was performed in terms of particle size, encapsulation efficiency, morphology and physical stability at 5 ± 3 °C. Results show the surfactant and lipid contents play a major role in StNC particle size distribution. The MH loading only promoted minor changes upon StNC properties. Formulations were stable without variations on physicochemical properties. All tested formulations presented a zeta-potential of +33.6 ± 6.7 mV, indicating a good physical stability and evidencing that StNC are suitable nanocarriers for topical use.

BCG-loaded chitosan microparticles: interaction with macrophages and preliminary in vivo studies.

The aim of this study was to develop a novel BCG-loaded chitosan vaccine with high association efficiency which can afford efficient interaction with APC and elicit local and Th1-type-specific immune response after intranasal administration. Chitosan-suspended BCG and BCG-loaded chitosan-alginate microparticles were prepared by ionotropic gelation. Interaction with APC was evaluated by fluorescence microscopy using rBCG-GFP. Specific immune responses were evaluated following intranasal immunisation of mice. Cellular uptake was approximately two-fold higher for chitosan-suspended BCG. A single dose of BCG-loaded microparticles or chitosan-suspended BCG by intranasal route improved Th1-type response compared with subcutaneous BCG. Chitosan-suspended BCG originated the highest mucosal response in the lungs by intranasal route. These positive results indicate that the proposed approach of whole live BCG microencapsulation in chitosan-alginate for intranasal immunisation was successful in allowing efficient interaction with APC, while improving the cellular immune response, which is of interest for local immunisation against tuberculosis.

Lipid nanoparticles as an emerging platform for cannabinoid delivery: physicochemical optimization and biocompatibility.

This work aims at developing and optimizing a valuable oral delivery carrier for the cannabinoid derivative CB13, which presents a high therapeutic potential in chronic pain states that respond poorly to conventional analgesics, but also shows highly unfavorable physicochemical properties. CB13-loaded lipid nanoparticles (LNP) formulations were developed through solvent-emulsion evaporation and optimized in terms of physicochemical properties, long-term stability, integrity under gastric simulated conditions and in vitro interaction with NIH 3T3, HEK 293T and Caco-2 cells. An optimized formulation of LNP containing CB13 was obtained from a wide range of conditions assayed and analyzed. The selection of the lipid core, production conditions and the inclusion of lecithin proved to be key factors for the final properties of encapsulation, integrity and performance of the carriers. The LNP formulation proposed proved to be a promising carrier for the oral delivery of CB13, a cannabinoid with high therapeutic potential in chronic pain states that currently lack a valid oral treatment.

Does the Reciproc file remove root canal bacteria and endotoxins as effectively as multifile rotary systems?

AIM: To evaluate the effectiveness of Reciproc for the removal of cultivable bacteria and endotoxins from root canals in comparison with multifile rotary systems. METHODOLOGY: The root canals of forty human single-rooted mandibular pre-molars were contaminated with an Escherichia coli suspension for 21 days and randomly assigned to four groups according to the instrumentation system: GI - Reciproc (VDW); GII - Mtwo (VDW); GIII - ProTaper Universal (Dentsply Maillefer); and GIV -FKG Race(™) (FKG Dentaire) (n = 10 per group). Bacterial and endotoxin samples were taken with a sterile/apyrogenic paper point before (s1) and after instrumentation (s2). Culture techniques determined the colony-forming units (CFU) and the Limulus Amebocyte Lysate assay was used for endotoxin quantification. Results were submitted to paired t-test and anova. RESULTS: At s1, bacteria and endotoxins were recovered in 100% of the root canals investigated (40/40). After instrumentation, all systems were associated with a highly significant reduction of the bacterial load and endotoxin levels, respectively: GI - Reciproc (99.34% and 91.69%); GII - Mtwo (99.86% and 83.11%); GIII - ProTaper (99.93% and 78.56%) and GIV - FKG Race(™) (99.99% and 82.52%) (P < 0.001). No statistical difference were found amongst the instrumentation systems regarding bacteria and endotoxin removal (P > 0.01). CONCLUSION: The reciprocating single file, Reciproc, was as effective as the multifile rotary systems for the removal of bacteria and endotoxins from root canals.

Effect of complete and partial removable dentures on chewing movements.

Partial or complete edentulism impairs mastication. However, it is unclear how the chewing cycle is affected by prosthetics. We evaluated the chewing movements of patients fitted with complete (CD) or removable partial denture (RPD). A total of 29 subjects were kinesiographically evaluated during chewing of peanuts and Optocal portions in a random sequence. The subjects were divided into two groups according to prosthesis type. Group RPD was composed of 14 partially edentulous patients using a lower distal extension RPD (mean age 61 ± 8 years), and group CD contained 15 completely edentulous patients using CD (mean age 65·9 ± 7·9 years) in both jaws. Opening, closing, occlusal and masticatory cycle times, movement angle (opening and closing), maximum velocity (opening and closing), total area and chewing cycle amplitudes were evaluated. The results were subjected to anova and Tukey's HSD test at a significance level of 5%. The RPD group exhibited shorter opening and closing phases and masticatory cycle time (P < 0·05). Maximum velocities were also higher in the RPD group, irrespective of the test material (P < 0·05). The area and amplitude of the chewing envelope was smaller in the CD group (P < 0·0001). The test material did not influence chewing cycles in any of the parameters evaluated (P > 0·05). RPD wearers use a faster chewing sequence with greater vertical and lateral jaw excursions compared with CD wearers.

Analysis of the stomatognathic system functions and mastication muscles in children affected by molar hypomineralization (MH): a cross-sectional study.

PURPOSE: To analyze the functions of the stomatognathic system in children with or without molar-incisor hypomineralization (MIH). METHODS: For this cross-sectional study, 72 children aged 6-12 years were recruited and divided in two groups: with MIH (G1) and without MIH (G2). T-SCAN was used to verify the distribution of occlusal contacts, gnathodynamometer to measure maximum molar bite force, and Iowa Oral Pressure Instrument (IOPI) to assess the strength of facial expression muscles. The t test and paired t test (p ≤ 0.05) were used for statistical comparisons. RESULTS: The molars affected by MIH exhibited lower distribution of occlusal forces (p < 0.001) and lower maximum molar bite force (p < 0.05) compared to the molars in the control group. However, there was no difference between the MIH-affected sides compared to the unaffected side, nor between the molars affected by MIH and their antagonists (p > 0.05). There were no differences in the forces of the facial expression muscles between the groups. CONCLUSIONS: These findings suggest that MIH significantly impacts occlusal force distribution and bite force, but not facial expression musculature.

Supplementing Ca salts of soybean oil via low-moisture molasses-based blocks to improve reproductive performance and overall productivity of beef cows.

This experiment evaluated reproductive and productive responses of beef cows receiving self-fed low-moisture blocks (LMB) enriched or not with Ca salts of soybean oil (CSSO) throughout the breeding season. Non-pregnant, suckled multiparous Angus-influenced cows were assigned to a fixed-time artificial insemination (AI) protocol (day -10 to 0) followed by natural service (day 15-70). Cows were managed in 12 groups (46 ± 4 cows/group) maintained in individual pastures, and groups received LMB enriched with 25 % (as-fed basis) of CSSO or ground corn (CON) from day - 10 to 100. Both treatments were designed to yield a daily LMB intake of 0.454 kg/cow (as-fed basis). Cows receiving CSSO had greater (P < 0.01) mean concentrations of ω-6 fatty acids in plasma samples collected on days 0 and 55. Cows receiving CSSO had greater (P = 0.05) pregnancy rate to fixed-time AI (67.2 vs. 59.3 %), whereas final pregnancy rate did not differ (P = 0.92) between treatments. Pregnancy loss was less (P = 0.03) in CSSO cows (4.50 vs. 9.04 %), which also calved earlier during the calving season (treatment × week; P = 0.04). Weaning rate tended to be greater (P = 0.09) in CSSO (84.8 vs. 79.4 %), although calf weaning age and weight did not differ (P ≥ 0.72) between treatments. Kilos of calf weaned/cow exposed was greater (P = 0.04) in CSSO cows (234 vs. 215 kg). Therefore, supplementing CSSO to beef cows via LMB during the breeding season improved their reproductive and overall productivity during a cow-calf cycle.

Development of an automated sensor for in-situ continuous monitoring of streambed sediment height of a waterway.

The sedimentary processes play a major role in every aquatic ecosystem, however, there are few automated options for in-situ monitoring of sediment displacement in the streambed of waterways. We present an automated optical instrument for in-situ continuous monitoring of sediment deposition and erosion of the streambed that requires no calibration. With a production cost of 32€, power consumption of 300 µA in sleep mode, and capacity to monitor the bedform of a waterway, the sensor was developed to evaluate the sediment dynamics of coastal areas with a wide spatial and temporal resolution. The novel device is intended to be buried in the sand and uses 32 infrared channels to monitor the streambed sediment height. For testing purposes, a maximum measuring length of 160 mm and 5 mm resolution was chosen, but these values are scalable. Sensors can be built with different ranges and precision according to the needs of the fieldwork. A laboratory experiment was conducted to demonstrate the working principle of the instrument and its behaviour regarding the turbidity originated by suspended sediment and the settling and deposition of the suspended particles. The device was deployed for 119 days in an estuarine area and was able to detect patterns in the sediment deposition and resuspension during the tidal cycles. Also, abnormal events occurred during the experiment as floods and algae blooms. During these events, the sensor was able to record exceptional erosion and sediment deposition rates. The reported automated instrument can be broadly used in sedimentary studies or management and planning of fluvial and maritime infrastructures to provide real-time information about the changes in the bedform of the watersheds.

Micellar effects and analytical applications of nitro substitution in 4-Nitro-N-alkyl-1,8-naphthalimide by cysteine derivatives.

The aromatic nucleophilic substitution reactions of the nitro group of 4-Nitro-N-alkyl-1,8-naphthalimides by thiolate anions produce fluorescent derivatives and their rates are strongly accelerated by micelles of hexadecyltrimethylammonium chloride even at low pH. Acceleration factors of this reactions can reach million-fold. As the products are oxidant-insensible, this reaction allows the determination of SH- containing compounds such as cysteine, glutathione or proteins even in oxidative conditions. Limits of detection are as low as 5 × 10-7 M, ten times lower than the limit for the classic 5,5'-dithiobis-(2-nitrobenzoic) acid method. Moreover, this reaction can be developed at pHs between 6.5 and 7.5 thereby diminishing the rate of spontaneous oxidation of the thiols. In addition, we demonstrated that 4-Nitro-N-alkyl-1,8-naphthalimides can be used to evidence SH groups in peptides, proteins and living cells.

In vitro regeneration of cocona (Solanum sessiliflorum, Solanaceae) cultivars for commercial production.

Cocona (Solanum sessiliflorum Dunal) is a solanaceous shrub native to the Amazon region that produces an edible fruit. This species has numerous advantages, particularly a high nutritional value and productivity. However, due to irregular germination and rapid loss of seed viability, there are few plantations for production on a large scale. Development of alternative propagation strategies is essential for the production of homogeneous seedlings of genotypes with superior agronomic performance. We developed techniques for in vitro regeneration of the cocona varieties Santa Luzia and Thaís for large-scale production of healthy plantlets. Twenty days after seeding, seedling segments germinated in vitro were used as explant sources. Three successive experiments were performed: one to test the effect of the explant source and combinations of two growth regulators, auxin (indole acetic acid, IAA) and kinetin (KIN), on the morphogenetic response; another to investigate the effect of the combination of growth regulators on the morphogenetic response of hypocotyl segments, and another to evaluate how sucrose concentration affects the development of adventitious shoots. The best shoot induction was obtained using hypocotyl segments and stem apices, while rhizogenesis was greatest in leaves with a petiole. The number of adventitious shoots per explant on hypocotyl segments increased with 10 and 20 mg/L KIN, combined with 0.02 mg/L IAA in the variety Santa Luzia. Sucrose combined with these growth regulator levels increased the average number of calli; these were optimally produced when 45 g/L sucrose and 0.01 mg/L IAA + 20 mg/L KIN were applied. Only sucrose concentration influenced shoot proliferation in the two S. sessiliflorum varieties, with a maximum at 17.5 g/L.

Laser surface texturing of Ti-6Al-4V by nanosecond laser: Surface characterization, Ti-oxide layer analysis and its electrical insulation performance.

The development of smart biomedical implants with intrinsic communication system between sensors and actuators, or between implant and patient, remains a challenge for scientific community. Titanium and its alloys, especially Ti6Al4V, are the most used materials in the implant's fabrication. The present work is concerned with implant internal communication printing process and presents a detailed study on titanium alloy (Ti6Al4V) surface texturing and their characterization (morphological and chemical) produced by a Nd: YAG laser, aiming to create localized electrical insulation zones, necessary to accommodate electrical communication systems. The characterization of the textured surface was carried out by scanning electron microscopy and the heat affected zone was analyzed by X-ray diffraction. The results showed the formation of α-Ti, Ti6O and Ti2O phases on the textured surface. Through simulations in TINA software, the outer oxide layer formed during laser texturing had efficiency above 90% as insulator when an electrical current was applied.

High-Performance µ-Thermoelectric Device Based on Bi2Te3/Sb2Te3 p-n Junctions.

A flexible and ultralight planar thermoelectric generator based on 15 thermocouples composed of n-type bismuth telluride (Bi2Te3) and p-type antimony telluride (Sb2Te3) legs (each with 400 nm thick) connected in series, on 25 µm thick Kapton substrate, was fabricated with impressive power factor values of 2.7 and 0.8 mW K-2 m-1 (at 298 K) for Bi2Te3 and Sb2Te3 films, respectively. The p-n junction thermoelectric device can generate a maximum open-circuit voltage and output power of 210 mV and 0.7 µW (3.3 mW cm-2), respectively, for a temperature difference of 35 K, which is higher than the one observed for a conventional thermoelectric device with metallic contacts for p-n junctions. The results were combined with numerical simulations, showing a good match between the experimental and the numerical results. The current density versus voltage (J-V) characteristics of the fabricated p-n junctions revealed a diode behavior with a turn-on voltage of ≈0.3 V and an impressive rectifying ratio (I+1V/I-1V) of ≈2 × 104.

Starch nanocapsules containing a novel neutrophil elastase inhibitor with improved pharmaceutical performance.

Psoriasis and atopic dermatitis patients show an excessive amount of elastase in peripheral blood neutrophils due to an imbalance between this proteolytic enzyme and its endogenous inhibitors, the search for new human neutrophil elastase (HNE) inhibitors are required. The HNE is an attractive therapeutic target and inhibitors with new molecular architectures have been extensively investigated. In this context a promising novel synthetic human neutrophil elastase inhibitor (ER143) was associated to a starch-based nanoparticulate system (StNC) with improved pharmaceutical performance, using a quality by design approach to support product development and optimization. The resulting formulation was characterized in terms of and in vitro release, permeation and retention studies in newborn pig skin, using Franz diffusion cells revealing the StNC have the ability to control the drug release rate and contribute to a high skin retention and/or permeation profiles. The anti-inflammatory activity accessed in vivo using the croton oil-induced ear inflammation model in mice showed that erythema and edema were attenuated in 98% following local application. These observations suggest the association of ER143 to the StNC promotes a deeper skin penetration and retention, also confirming StNC as a potential topical delivery system.