RESUMO
Most velocimetry approaches for fluid flows measure linear components of the velocity vector; yet, the angular velocity components, particularly at small scales in turbulent flows, also need to be resolved to study energy transfer and other important flow characteristics. Here, we detail an optical sensor approach to determine a component of the angular velocity vector. This approach uses beams of structured light and a machine learning-based analysis. We discuss the methodology to train the machine learning model and test it in experimentally validated simulations. This approach represents an interesting new direction for fluid flow velocimetry which may be extended to sense other flow parameters by selecting different light structures.
RESUMO
Suppression of Q-switching instabilities with an actively controlled intracavity loss modulator is demonstrated in an Er-doped waveguide laser that is mode locked with a slow saturable absorber at repetition rates of as much as 100 MHz. By automatic gain control in the feedback loop, stable mode locking is achieved over the entire parameter range of the laser. This approach renders laser stabilization independent of the characteristics of the gain medium and intracavity power. The pulse-shaping dynamics is not affected by the presence of the intracavity loss modulator.
RESUMO
We demonstrate femtosecond performance of an ultrabroadband high-index-contrast saturable Bragg reflector consisting of a silicon/silicon dioxide/germanium structure that is fully compatible with CMOS processing. This device offers a reflectivity bandwidth of over 700 nm and subpicosecond recovery time of the saturable loss. It is used to achieve mode locking of an Er-Yb:glass laser centered at 1540 nm, generating 220-fs pulses, with what is to our knowledge the broadest output spectrum to date.
RESUMO
We have studied a passive, harmonically mode-locked stretched-pulse erbium fiber ring laser with net positive dispersion that is self-stabilized by gain depletion and electrostriction. Periodic pulses with supermode suppression of >75 dB and picosecond jitter are achieved. The pulses are compressible to 125 fs by external chirp compensation. The repetition rate is 220 MHz, and the average power is as high as 80 mW.
RESUMO
Ultrafast optical pulses shorter than 20 fs with 400-mW average power at a 110-MHz repetition rate have been generated by a Cr(4+):YAG laser with only double-chirped mirrors for dispersion compensation. The corresponding pulse spectrum has a peak intensity at 1450 nm and extends from 1310 to 1500 nm full width at half-maximum (FWHM). These pulses, which are believed to be the shortest generated to date from a Cr(4+):YAG laser, are only four optical cycles within the FWHM intensity width.
RESUMO
Broadband saturable Bragg reflectors (SBRs) are designed and fabricated by monolithic integration of semiconductor saturable absorbers with broadband Bragg mirrors. The wet oxidation of AlAs creates low-index AlxOy layers for broadband, high-index-contrast AlGaAs/AlxOy or InGaAlP/AlxOy mirrors. SBR mirror designs indicate greater than 99% reflectivity over bandwidths of 294, 466, and 563 nm for center wavelengths of 800, 1300, and 1550 nm, respectively. Highly strained and unstrained absorbers are stably integrated with the oxidized mirrors. Large-scale lateral oxidation techniques permit the fabrication of SBRs with diameters of 500 microm. Large-area, broadband SBRs are used to self-start and mode lock a variety of laser systems at wavelengths from 800 to 1550 nm.
RESUMO
A balanced cross correlator, the optical equivalent of a balanced microwave phase detector, is demonstrated. Its use in synchronizing an octave-spanning Ti:sapphire laser and a 30-fs Cr:forsterite laser yields 300-attosecond timing jitter measured from 10 mHz to 2.3 MHz. The spectral overlap between the two lasers is strong enough to permit direct detection of the difference in carrier-envelope offset frequency between the two lasers.