Dental implant treatment in patients with cancer on high-dose antiresorptive medication: A prospective feasibility study with 2 years follow-up.

OBJECTIVES: Dental implant treatment is considered contraindicated in patients with cancer on high-dose antiresorptive medication (HDAR). The aim of this prospective, feasibility study was to evaluate implant treatment in patients with cancer on HDAR, in terms of implant survival, implant success, and oral health-related quality of life (OHLQoL) after 2 years of loading. MATERIALS AND METHODS: Implants were inserted in three groups of HDAR patients: (1) Previous tooth extraction, no medication-related osteonecrosis of the jaw (MRONJ), (2) Previous MRONJ, now healed, (3) Existing MRONJ, planned surgical resection. Implants were placed without adjunctive bone or soft tissue argumentation. Abutment operation was performed after ≥12 weeks. Prosthetic treatment was initiated ≥14 weeks. Survival and success rate were determined, and OHLQoL was analyzed with OHIP-49 and QLQ-H&N35 questionnaires. Patients were seen for 6 months, 1- and 2 years follow-up. RESULTS: Twenty-two patients, 39 implants, completed the implant-based prosthetic treatment. Implant-supported crowns and overdentures were fabricated. Thirteen patients (59%) with 23 implants (59%) completed 2 years follow-up. Overall implant survival and success rate after 2 years of loading were 100% and 97.4%, respectively. OHLQoL for the patients increased in all groups after the treatment, a substantial increase was seen in group 3. Two patients developed MRONJ, but not related to the implant treatment. CONCLUSION: Dental implant treatment, with high survival and success rate and increased post-treatment OHLQoL, is feasible in HDAR patients after 2 years of loading. Caution with general recommendations should be exercised.

Positional changes of maxillary central incisors following orthodontic treatment using single-crown implants as fixed reference markers.

OBJECTIVES: This follow-up study (1) compares tooth displacement of central incisors in patients with and without pre-implant orthodontic treatment and (2) investigates whether sex, age, or orthodontic retention have an effect on tooth displacement after the insertion of single-crown implants. MATERIALS AND METHODS: Fifty-seven patients - thirty-seven with (test group) and twenty without pre-implant orthodontic treatment (control group) - were rehabilitated with 89 single-crown implants in the upper maxilla. Clinical and radiographic data, clinical photographs, and dental casts were collected during baseline examinations after prosthetic rehabilitation and at the final follow-up examination at least 5 years later. A total of 114 dental casts were digitalized and aligned using a software program to measure changes in the positions of the central incisors. RESULTS: After a follow-up period of at least five years, 87% of the central incisors measured in the test group were displaced >0.25 mm vertically compared with 70% in the control group. Seventy-eight percent of the test group teeth had moved >0.25 mm horizontally compared with 55% in the control group. These differences were not significant, and there were no significant correlations with patient age or sex. CONCLUSION: The majority of patients had minor vertical (60%) or horizontal (67%) tooth displacement of the central incisors (0.25-0.75 mm) after a minimum follow-up period of 5 years. This study found no significant differences in tooth displacement comparing patients with and without pre-implant orthodontic treatment. No significant effect of sex, age, orthodontic retention, or implant location was observed on tooth displacement.

Oral health-related quality of life and complications after treatment with partial removable dental prosthesis.

The aims of this study were to measure and describe the oral health-related quality of life (OHRQoL) and to identify the complications caused by partial removable dental prosthesis (RDPs) in patients 1-5 years after treatment. Complications were identified in 65 patients who were treated with 83 RDPs (48 upper, 35 lower). OHRQoL was measured using the OHIP-49 before treatment and at the baseline (1-2 months after treatment) and follow-up (1-5 years after treatment) examinations. The types and numbers of oral problems that were experienced were described based on OHIP items with a score of 3 and 4. A significant improvement (P < 0·05) in the total OHIP-49 was registered from pre-treatment (mean 42, SD ± 37) to baseline (mean 29, SD ± 27) and from pre-treatment to 1-5 years after treatment (mean 32, SD ± 30). There was no significant difference between the baseline and 1- to 5-year follow-up examinations. Problems with eating and appearance registered at pre-treatment were improved at baseline and after 1-5 years. Problems with dentures that had been registered pre-treatment were improved at baseline but reoccurred after 1-5 years. The two most frequent complications were ill-fitting RDPs and inflammation of the oral mucosa, followed less frequently by fractures of the clasps. Treatment with RDPs improved OHRQoL, but denture-related problems partly remained, and new problems related to RDPs occurred 1-5 years after treatment. The two most frequent complications were ill-fitting RDPs and inflammation of the oral mucosa.

Effect of treatment with fixed and removable dental prostheses. An oral health-related quality of life study.

The aim of the study was to evaluate patient-reported effects of treatment with fixed dental prostheses (FDP) and removable dental prostheses (RDP) and relate the change in Oral Health Related Quality of Life (OHRQoL) to the type of treatment and objective dental variables of aesthetics and mastication. Additionally, the purpose of the study was to identify aspects of impairment and improvement that the treatments caused. Fixed dental prostheses treatment was performed in 200 patients and RDP treatment in 107 patients. Gender, age, region of replacement, and number of teeth present and replaced were obtained. The participants completed the Oral Health Impact Profile 49 (OHIP-49) before and after treatment. A control group with no need for dental treatment also completed the OHIP-49. All participants had a significant improvement in OHRQoL. The improvement was higher for the RDP group than the FDP group. Removable dental prostheses that replaced only masticatory teeth did not improve the OHRQoL significantly. The improvement in OHRQoL for both the FDP and RDP groups was not at the level of the control group. Higher age was associated with lower improvement in OHRQoL. Higher age, being a woman and having teeth replaced in the aesthetic zone were associated with deterioration in OHRQoL. Both RDP treatment and FDP treatment were associated with a reduction in the problems most frequently reported before treatment. Treatment with RDP was associated with new problems caused by the RDP. Fixed dental prostheses and RDP treatments improved OHRQoL and reduced the number of problems. The RDP participants improved more than the FDP participants.

From brain to bridge: masticatory function and dental implants.

Masticatory function is an important aspect of oral health, and oral rehabilitation should aim to maintain or restore adequate function. The present qualitative review is the joint effort of a group of clinicians and researchers with experiences ranging from basic and clinical oral neuroscience to management of patients with dental implants. The aim is to provide a short summary for the clinician of the many aspects related to masticatory function (including quality of life) and rehabilitation with dental implants. While there are many reviews on the tissue responses to dental implants and technical aspects, the functional aspects have received relatively little focus.

Comparison of an individual systematic interview method and the oral health impact profile. Responsiveness and ability of describing treatment effect of oral rehabilitation.

The Schedule for the Evaluation of Individual Quality of Life - Direct Weighting (SEIQoL-DW) has shown potential for generating information and measuring Oral Health-Related Quality of Life (OHRQoL) in oral rehabilitation. The Oral Health Impact Profile-49 (OHIP-49) has been widely used in population studies. The purpose of this study was to compare the responsiveness and ability of the SEIQoL-DW and the OHIP-49 to qualitatively describe the change following oral rehabilitation. Twenty-two participants treated with fixed or removable prosthesis were interviewed before and after treatment using the SEIQoL-DW and the OHIP-49 questionnaire. The participants rated the subjective perception of change and answered two global oral rating questions. A clinical examination was performed to identify dental status variables. No significant difference was found between pre- and post-treatment SEIQoL-DW scores. A significant difference between pre- and post-treatment OHIP-49 scores was found. The SEIQoL-DW and OHIP-49 change scores was significantly correlated. The dental status variables such as number of teeth, number of teeth replaced, number of occluding units, type of treatment, extractions and removable dental prosthesis (RDP) before treatment did not influence the change scores. The effect size was low for the SEIQoL-DW (0.15) and moderate for the OHIP-49 (0.60). Improvement in subjective perception of change was related to both improvement and deterioration in change scores. More aspects were mentioned in the SEIQoL-DW compared to the OHIP-49. Based on the change in overall score and effect size, the SEIQoL-DW showed a weaker responsiveness than the OHIP-49. The SEIQoL-DW, however, described the change more detailed than the OHIP-49.

Patient-generated aspects in oral rehabilitation decision making I. Comparison of traditional history taking and an individual systematic interview method.

Decision making in oral rehabilitation is often based on diagnoses related to impairment of different oral functions. In making the decision when to treat, the dentist must work in cooperation with the patient. By incorporating patient-generated aspects into the decision making process, the dentist finds it easier to decide if and why treatment should be undertaken and what treatment modality to use. The purpose of this study was to describe the potential of an interview method, the 'Schedule for the Evaluation of Individual Quality of Life-Direct Weighting' (SEIQoL-DW), and compare it with a traditional history taking, in generating information to be used in decision making in oral rehabilitation. Fifty-seven participants in need of oral rehabilitation were enrolled in the study. The participants underwent a traditional history taking and were interviewed using the SEIQoL-DW method. The SEIQoL-DW generated a high number of cues for all participants. Significantly more cues and additional information were generated by the SEIQoL-DW than by the traditional history taking. The additional information concerned consultation and dentist issues, psychological aspects and treatment preferences. A high percentage of the participants were positive towards the use of the SEIQoL-DW method in their treatment planning. The SEIQoL-DW was considered to be a viable tool for decision making in oral rehabilitation.

Implants and/or teeth: consensus statements and recommendations.

In August 23-25, 2007, the Scandinavian Society for Prosthetic Dentistry in collaboration with the Danish Society of Oral Implantology arranged a consensus conference on the topic 'Implants and/or teeth'. It was preceded by a workshop in which eight focused questions were raised and answered in eight review articles using a systematic approach. Twenty-eight academicians and clinicians discussed the eight review papers with the purpose to reach consensus on questions relevant for the topic. At the conference the consensus statements were presented as well as lectures based on the review articles. In this article the methods used at the consensus workshop are briefly described followed by the statements with comments.

Periodontal ligament formation around different types of dental titanium implants. I. The self-tapping screw type implant system.

The aim of this study was to determine if a periodontal ligament can form around self-tapping, screw type titanium dental implants. Implants were inserted in contact with the periodontal ligament of root tips retained in the mandibular jaws of 7 monkeys. In each side of the mandible, 1 premolar and 2 molars were removed in such a manner that in approximately half the cases, the root tips were retained. Following healing, the experimental areas were examined on radiographs, and sites were selected for the insertion of the implants, so that every second implant would have a close contact to the retained root tips. Three months after placement of the implants, the animals were sacrificed, and ground sections were produced for histological analysis. The results demonstrated that newly-formed cementum had become deposited on the implant surface in the contact area between the implant and the retained roots, whereas osseointegration was consistently found on the remaining part of the implant surface as well as on the entire surface of the implants placed without contact to the retained root tips. The study has shown that, when placed in contact with periodontal ligament tissue of retained roots, a periodontal ligament can form on self-tapping, screw type titanium dental implants in areas where a void is present between the surrounding bone and the implant at the time of insertion.

Anchorage of titanium implants with different surface characteristics: an experimental study in rabbits.

PURPOSE: To compare the anchorage of titanium implants with different surface roughness and topography and to examine histologically the peri-implant bone after implant removal. MATERIALS AND METHODS: Screw implants with five different surface topographies were examined: (1) turned ("machined"), (2) TiO2-blasted with particles of grain size 10 to 53 microns; (3) TiO2-blasted, grain size 63 to 90 microns; (4) TiO2-blasted, grain size 90 to 125 microns; (5) titanium plasma-sprayed (TPS). The surface topography was determined by the use of an optical instrument. Twelve rabbits, divided into two groups, had a total of 120 implants inserted in the tibiae. One implant from each of the five surface categories was placed within the left tibia of each rabbit. By a second operation, implants were installed in the right tibia, after 2 weeks in group A and after 3 weeks in group B. Fluorochrome labeling was performed after 1 and 3 weeks. Removal torque (RMT) tests of the implants were performed 4 weeks after the second surgery in group A and 9 weeks after the second surgery in group B. Thus, in group A, two healing groups were created, representing 4 and 6 weeks, respectively. The corresponding healing groups in group B were 9 and 12 weeks. The tibiae were removed, and each implant site was dissected, fixed, and embedded in light-curing resin. Ground sections were made, and the peri-implant bone was analyzed using fluorescence and light microscopy. RESULTS: The turned implants had the lowest Sa and Sy values, whereas the highest scores were recorded for the TPS implants. The corresponding Sa and Sy values for the TiO2-blasted implants were higher when a larger size of grain particles had been used for blasting. At all four observation intervals, the TPS implants had the highest and the turned implants the lowest RMT scores. The differences between the various TiO2-blasted implants were, in general, small, but the screws with the largest Sa value had higher RMT scores at 6, 9, and 12 weeks than implants with lower Sa values. The histologic analysis of the sections representing 6, 9, and 12 weeks revealed that fractures or ruptures were present in the marginal, cortical peri-implant bone. In such sections representing the TPS and TiO2-blasted implant categories, ruptures were frequently found in the zone between the old bone and the newly formed bone, as well as within the newly formed bone. CONCLUSIONS: The present study demonstrated that a clear relation exists between surface roughness, described in Sa values, and implant anchorage assessed by RMT measurements. The anchorage appeared to increase with the maturation of bone tissue during healing.

ITI implants with overdentures: a prevention of bone loss in edentulous mandibles?

Changes in the bone mineral content (BMC) of edentulous mandibles with osseointegrated ITI implants supporting overdentures were measured in vivo by dual-photon absorptiometry. The BMC measurements were performed 3 weeks postoperatively and at the 2-year follow-up visit. Measurements were made in the ITI site (anteriorly), the premolar region just behind the fixtures, and the standard site of the mandible for obtaining reference values of the age-related MBC loss. The increased function of the mandible after this treatment seems to cause a load-related bone formation that minimizes, or in some cases may counteract, the physiologic age-related BMC loss leading to osteoporosis.

Implant supported overdentures--the Copenhagen experience.

OBJECTIVES: To evaluate the functional and biological effect of implant-supported overdenture treatment in the lower jaw. METHODS AND MATERIALS: Thirty-two patients were consecutively treated with Astra Tech implants in the lower jaw for retaining overdentures. All implants had a diameter of 3.5 mm and all but two of the implants were longer than 10 mm. For the implant supported overdentures two methods of attachment were used, a bar or a ball. RESULTS: One of 69 fixtures was lost during the 4-5 year observation period. The mean bone loss for all fixtures was less than 0.2 mm per year. Complications included 15 fractures of the ball attachment and 26 episodes of looseness of the matrices holding the screw in place. Patient satisfaction with the treatment of the lower jaw was high although 7 patients found that control of the upper denture was poor following treatment. CONCLUSIONS: When the bone quality and quantity is sufficient, two implants can support an overdenture in the lower jaw, providing prosthesis which functions well.

A method for histological preparation of undecalcified bone sections containing acrylic bone cement.

An improved and time reducing method is presented for the histological evaluation of bone containing polymethylmethacrylate (PMMA) bone cement. The undecalcified bone was embedded in epoxy resin and section of 50-100 microns thickness were produced using a commercially available cutting grinding system. The sections were stained with Stevenel's blue and van Gieson picrofuchsin or a modified hematoxylineosin. PMMA bone cement was not dissolved and remained enabling examination in situ of an intact cement bone interface and tissue reaction without decalcification.

Mechanical failure of hydroxyapatite-coated titanium and cobalt-chromium-molybdenum alloy implants. An animal study.

Defects in the hydroxyapatite (HA) ceramic coatings applied to metallic implant systems may occur at the time of insertion or at the time of in vivo loading. However, defects may also occur with time because of interaction with physiological fluids. A canine study was performed to make a histological and biomechanical evaluation of HA-coated titanium and cobalt-chromium-molybdenum alloy implants in a non-weight-bearing model. Twelve cylindrical plugs were inserted into the medial femoral condyle on 6 mongrel dogs. HA-coatings of 80-120 microns thickness were applied to 6 Cr-Co-Mo implants and 6 Ti-6AI-4V implants. The implants were removed together with adjacent bone tissue after 4 weeks. There were no statistically significant differences between the two groups for interface shear strength. No differences were encountered with HA-coating on Cr-Co-Mo or on Ti-6AI-4V, failure consistently being caused by disruption between the metal surface and the HA-coating, which remained fixed to the bone. At histologic evaluation the HA-coated implants exhibited a great amount of direct bone-to-implant contact. In spite of that, this study indicates that HA-coating on smooth metal surfaces might not be suitable for clinical use, because of low bonding strength between metal and coating.

Spontaneous progression of ligature induced peri-implantitis at implants with different surface roughness: an experimental study in dogs.

BACKGROUND: Peri-implantitis is associated with the presence of submarginal plaque, soft-tissue inflammation and advanced breakdown of the supporting bone. The progression of peri-implantitis following varying periods of continuing plaque accumulation has been studied in animal models. OBJECTIVE: The aim of the current experiment was to study the progression of peri-implantitis around implants with different surface roughness. MATERIAL AND METHODS: In five beagle dogs, three implants with either a sandblasted acid-etched surface (SLA) or a polished surface (P) were installed bilaterally in the edentulous premolar regions. After 3 months on a plaque control regimen, experimental peri-implantitis was induced by ligature placement and plaque accumulation was allowed to progress until about 40% of the height of the supporting bone had been lost. After this 4-month period, ligatures were removed and plaque accumulation was continued for an additional 5 months. Radiographs of all implant sites were obtained before and after 'active' experimental peri-implantitis as well as at the end of the experiment. Biopsies were harvested and the tissue samples were prepared for light microscopy. The sections were used for histometric and morphometric examinations. RESULTS: The radiographic examinations indicated that similar amounts of bone loss occurred at SLA and P sites during the active breakdown period, while the progression of bone loss was larger at SLA than at polished sites following ligature removal. The histological examination revealed that both bone loss and the size of the inflammatory lesion in the connective tissue were larger in SLA than in polished implant sites. The area of plaque was also larger at implants with an SLA surface than at implants with a polished surface. CONCLUSION: It is suggested that the progression of peri-implantitis, if left untreated, is more pronounced at implants with a moderately rough surface than at implants with a polished surface.

Resistance to cyclic loading of teeth restored with posts.

This in vitro study evaluated the effect of presence of post, presence of core, and of shape, type, and surface treatment of posts on resistance to cyclic loading of crowned human teeth. For all teeth, crowns designed without ferrule were cast in sterling silver and luted with resin cement (Panavia F). Each tooth underwent cyclic loading of 600 N at two loads per second until failure. Teeth that had only been crowned showed significantly higher resistance to cyclic loading than teeth with cores or with post and cores. No significant differences were found between teeth restored with cores only or with post and cores, irrespective of surface-treatment of the posts. Teeth restored with parallel-sided cast post (ParaPost XP) and cores showed significantly higher resistance to cyclic loading than teeth with either tapered cast posts or untreated prefabricated posts of titanium alloy (ParaPost XH) or glass fiber composite (ParaPost Fiber White). No significant difference was found between teeth restored with parallel-sided cast post and cores and teeth restored with untreated prefabricated posts of zirconia (Cerapost). Surface treatment of posts significantly increased the resistance to cyclic loading compared with untreated posts. When posts are used, surface treatment is recommended.

Implant-supported mandibular overdentures retained with ball or bar attachments: a randomized prospective 5-year study.

PURPOSE: The aim of the present study was to evaluate the periimplant conditions and the maintenance requirements for implant-supported overdentures in the mandible retained with ball or bar attachments during a 5-year period. MATERIALS AND METHODS: Twenty-six completely edentulous patients had two Astra Tech dental implants placed in the anterior part of the mandible. The denture attachment system for the patients was chosen randomly by drawing lots. Eleven patients drew the bar attachment system and fifteen patients drew the ball attachment system. Plaque Index, Gingival Index, and probing pocket depth were assessed around each implant. Periotest values were recorded, and periodically identical intraoral radiographs were obtained with a specially designed film-holding device. RESULTS: No implants were lost from baseline to the 5-year registration. The periimplant conditions were very healthy after 5 years. No significant differences of the periimplant variables were recorded between the bar and the ball groups. During the first year of function, significantly more complications/repairs were registered in the bar group than in the ball group. In the following years, no significant differences were registered. The mean frequency of complications/repairs per patient per year was 1.0 in the bar group and 0.6 in the ball group during the 5-year observation period. CONCLUSION: Two implants with ball or bar attachment supported an overdenture in the mandible for 5 years with a 100% survival rate. No differences in marginal bone loss or health of the periimplant mucosa were observed between bar and ball attachment, but the frequency of technical complications/repairs per patient was higher around bar than ball attachments.

A prospective 5-year study of fixed partial prostheses supported by implants with machined and TiO2-blasted surface.

PURPOSE: The aim of the present study was to evaluate whether there was a difference between machined and TiO(2)-blasted implants regarding survival rate and marginal bone loss during a 5-year observation period. MATERIALS AND METHODS: A total of 133 implants (Astra Tech Dental Implants; Astra Tech AB, Mölndal, Sweden) were placed in 50 patients at 6 centers in 4 Scandinavian countries. Forty-eight implants were installed in the maxilla and 85 implants in the mandible. A randomization and a stratification were done, so that each fixed partial prosthesis was supported by at least 1 machined and 1 TiO(2)-blasted implant. The implant-supported fixed partial prostheses (ISFPP) were fabricated within 2 months after postoperative healing. A total of 52 ISFPP (17 maxillary, 35 mandibular) were inserted. The patients were clinically examined once a year for 5 years. At the annual follow-up, biological as well as technical complications were recorded. RESULTS: Of the 133 implants placed, 3 were reported as failed after 5 years of follow-up, resulting in an overall cumulative survival rate of 97.6%. The cumulative implant survival rates were 100% for the TiO(2)-blasted implants and 95.1% for the machined implants. No significant difference in survival was, however, found between the machined and TiO(2)-blasted implants after 5 years. The mean marginal bone loss in the maxilla was 0.21 +/- 0.83 mm (SD) for the machined implants and 0.51 +/- 1.11 mm (SD) for the TiO(2)-blasted implants during the 5-year observation period. In the mandible, the mean marginal loss was 0.22 +/- 1.13 mm for the machined implants and 0.52 +/- 1.07 mm for the TiO(2)-blasted implants from baseline to the 5-year examination. No significant difference in marginal bone loss between the 2 surface groups was found during the 5-year observation period. CONCLUSIONS: The present study shows good 5-year results with small ISFPP in the mandible, as well as in the maxilla. No significant differences were found in failure rate and marginal bone loss around implants with a machined rather than a TiO(2)-blasted surface. J Prosthodont 2001;10:2-7.

Single-tooth replacement by osseointegrated Astra Tech dental implants: a 2-year report.

This study presents the outcome of single-tooth restorations supported by Astra Tech single-tooth implants followed for 2 years. Forty-seven implants were placed in the same number of patients. Forty-three patients attended the second recall visit, and none of the evaluated implants have been removed. The mean marginal bone loss after 2 years of service was 0.31 (SD = 0.48) mm. Overall, few complications were recorded during the 2-year period, the most frequent of which were loose crowns (7).